IE8 doesn't display when opened on Server 2003 SP2

Internet Explorer starts the iexplore.exe process and begins to use CPU and memory but never displays. Security patches refuse to apply to IE 8 on this server. Tried reinstalling/repairing IE8 but received the message "Operating System not supported."
Tried the same in Safe Mode as well. IE 8 does not show up as an installed feature but still appears to be present throughout the system.
Any ideas?

Hi,
Start>Control Panel>Internet Options>Advanced tab, uncheck "Enable third-party browser extensions"....
General tab, change your homepage to about:blank
Just to be safe reboot your Windows Server 2003 for the full changes to take effect.
If still no joy... Start>Run.... msconfig>Startup tab, disable any nonMicrosoft startup processes...
Reboot for the changes to take effect.
Questions regarding Internet Explorer 8, 9 and 10 and Internet Explorer 11 for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions. If you are a consumer looking for answers or to
raise a question, it's highly recommended you head on over to http://answers.microsoft.com/
Rob^_^

Similar Messages

Auto rollback with no error when upgrading windows server 2003 sp2 to windows server 2008 R2

Hi, I have a server needs to upgrade from windows server 2003 sp2 to windows server 2008 r2.
It should be supported from technet site
And yes, it went through all the list of upgrade. After rebooted, it told me "the upgrade was not successful, Your previous version of windows is being restored. Do not restart your computer during this time.".
Is there a place located the upgrade failure log? What's the common cause about the auto roll back?

Thanks for the reply.
I copied some sentences in Setuperr.log
2014-07-10 23:58:33, Error
Failed to find driver file path. Error=00000002x[gle=0x80092004]
2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.cnt' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.hlp' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
2014-07-11 00:06:19, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll,
{8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
2014-07-11 00:06:20, Error      [0x08085e] MIG    UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll]
does not exist.[gle=0x00000003]
2014-07-11 00:13:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll,
{743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
2014-07-11 00:18:56, Error      [0x0803db] MIG    IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\####\NTUSER.DAT; giving up (2).[gle=0x00000003]
2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service
usbhub20.
2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setupact.log[gle=0x000003f0]
2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setuperr.log[gle=0x000003f0]
Is it caused by driver error, MediaPlayer-DLMigPlugin.dll
and drmmgrtn.dll?

Outlook Web Access doesn't display when in a Page

Hi guys,
I have set up an IView to access Outlook Webmail, as per the normal help documents, and the IView works perfectly - displays my Inbox and everything. If I add the IView into a workset, users are able to view their Inbox too.
However, If I create a Page and put the IView on that page, the Inbox no longer displays - it just has a blank window where the Inbox should appear. Right-clicking on the blank page and going to Properties, I can see that its going to the correct web address.
My question is, why doesn't the Inbox display when the IView is in a Page?
Thanks,
Michael.
PS, Here's something unusual... In Content Administration --> Portal Content, when I right-click on the Page and choose "preview" it displays the Inbox properly. However, it doesn't display when its accessed from a Workset.

Yes, I have added the Page to the Workset, and also the IView to the Page.
If I set up a temporary workset, And assign the 2 objects to it (the IView and the Page), they appear as links at the top of my Portal. When I click the link assigned to the IView, the Inbox is shown. When I click the link assigned to the Page, it only shows a blank window instead of the Inbox.
Michael.

"The exception unknown software exception (0xc06d007e) occured in the application at location 0x7c812aeb" - error displayed when opening PDF files. What i do?

"The exception unknown software exception (0xc06d007e) occured in the application at location 0x7c812aeb" - error displayed when opening PDF files. What i do?

What is your Reader XI version?
Have you tried to disable Protected Mode [Edit | Preferences | Security (Enhanced)] ?

RC-50004: Fatal: Error occurred in ApplyAppsTechStack: While Installatling EBS R12 on window server 2003 SP2

Hi Mr.Hussain,
Can you please guide me how to solve this error,
i am trying to install oracle EBS R12.1.1 on windows server 2003, i am following your document, installation of EBS R12.1 in windows server 2003 SP2
i did stage everything going right, even i did md5sums for the extracted file of EBS R12 folder.
i stated installation, even installation done perfectly at the end of installation 2 Command Prompt windows appear and stopped, i try to open log file from oracle installation folder, i got this message at the end of log file
3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver c:\oracle\PROD\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for PROD instance
can you please guide me how to solve this error,

This is a generic error so you would need to check the installation log files for details about the error.
Please see if (Rapidwiz 12.1.1 Fails To Execute Ouicli.Pl During Apps 10.1.3 Techstack Autoconfig (Doc ID 1328464.1)) is applicable.
Thanks,
Hussein

Windows Server 2003 (sp2 - 32bit) - OEM problem

I inherited this in-house (closed) system a few years ago and have not had a problem until a couple of months ago. It has been running for about 1 1/2 years.
Desc:   Oracle 11.1.0.6 (64bit) on Windows Server 2003 (sp2 - 32 bit)   [[ yes, I know, what the heck is a 64 bit Oracle running on a 32 bit windows?]]
     2 - instances running - one production with associated ASM, one RMAN cat with no ASM - all folders are backed up to a large SANS.
          - each instance has its own listener
          - each instance has its own dbconsole service
Problem:
1. a couple of months ago, when I attempted to access the production OEM, I started seeing
service-specific error 1 (0x1), NET HELPMSG 3547
     -- the first time this happened, I immediately opened the OEM for rman and it was successful
          It was also fortunate in that we were doing some power upgrades and all of our systems were shutdown - and after this system was powered on, the production OEM worked fine.
     -- a few weeks later, the prod OEM was not accessible - giving the same 3547 error. We were not able to shut down, so I stopped the Windows services for this instance, and stopped
               the windows listener services for both instances. I then started only the production windows services, and was able to use the prod OEM. Then I started the listener service for
               the rman and all was well.
     -- this Monday (today is Thurs), the prod OEM was inaccessible again and I tried the stopping and restarting of the services and started seeing 7024 errors. I tested the rman OEM and
          it was fine. I stopped both instances via sqlplus commands, used emctl to stop both dbconsoles (of course, the prod one was already not running), shut down the ASM instance and
          then stopped all the Windows services. then I only brought up the prod services and confirmed with sqlplus commands that everything was started - but the final service, dbconsole
          would not start. This morning I was able to reboot the server (after shutting down all the Oracle services) and now I can access the prod and the rman OEMs.
2. What the heck?   Because I can get the prod OEM working with just a reboot, I don't know if I should have to rebuild dbconsole.   And since I'm the only one disuncombullated because
          of the prod OEM, it is not a fall-down-crying situation - I'm actually a sqlplus kinda guy, but when I'm just doing visual maintenance, it is nice to view OEM remotely for a quick check.
3. I've been working with Linux systems and Oracle for many years and I've never experienced this kind of problem.   Oh, and since it is a closed system, it will be when pigs sprout wings
               and start flyng that I'll be allowed to install patches - but again, if a reboot 'fixes' this issue, what the heck? Oh, finally, I don't believe in the common windows fix of rebooting - I'd
               like to find out WHY this is happening and literally fix it.
ANYBODY have a clue?   Not me...
Thanks for your time.

user12183171 wrote:
I inherited this in-house (closed) system a few years ago and have not had a problem until a couple of months ago. It has been running for about 1 1/2 years.
Desc:   Oracle 11.1.0.6 (64bit) on Windows Server 2003 (sp2 - 32 bit)   [[ yes, I know, what the heck is a 64 bit Oracle running on a 32 bit windows?]]
You'd better double check that. It is fundamentally impossible for 64-bit software to run on a 32-bit OS.
     2 - instances running - one production with associated ASM, one RMAN cat with no ASM - all folders are backed up to a large SANS.
          - each instance has its own listener
One single listener, with the default name of LISTENER, using the default port of 1521, is quite capable of -- indeed, was designed to -- service multiple instances of multiple versions running from multiple homes.
          - each instance has its own dbconsole service
Problem:
1. a couple of months ago, when I attempted to access the production OEM, I started seeing
service-specific error 1 (0x1), NET HELPMSG 3547
     -- the first time this happened, I immediately opened the OEM for rman and it was successful
          It was also fortunate in that we were doing some power upgrades and all of our systems were shutdown - and after this system was powered on, the production OEM worked fine.
     -- a few weeks later, the prod OEM was not accessible - giving the same 3547 error. We were not able to shut down, so I stopped the Windows services for this instance, and stopped
               the windows listener services for both instances. I then started only the production windows services, and was able to use the prod OEM. Then I started the listener service for
               the rman and all was well.
     -- this Monday (today is Thurs), the prod OEM was inaccessible again and I tried the stopping and restarting of the services and started seeing 7024 errors. I tested the rman OEM and
          it was fine. I stopped both instances via sqlplus commands, used emctl to stop both dbconsoles (of course, the prod one was already not running), shut down the ASM instance and
          then stopped all the Windows services. then I only brought up the prod services and confirmed with sqlplus commands that everything was started - but the final service, dbconsole
          would not start. This morning I was able to reboot the server (after shutting down all the Oracle services) and now I can access the prod and the rman OEMs.
2. What the heck?   Because I can get the prod OEM working with just a reboot, I don't know if I should have to rebuild dbconsole.   And since I'm the only one disuncombullated because
          of the prod OEM, it is not a fall-down-crying situation - I'm actually a sqlplus kinda guy, but when I'm just doing visual maintenance, it is nice to view OEM remotely for a quick check.
3. I've been working with Linux systems and Oracle for many years and I've never experienced this kind of problem.   Oh, and since it is a closed system, it will be when pigs sprout wings
               and start flyng that I'll be allowed to install patches - but again, if a reboot 'fixes' this issue, what the heck? Oh, finally, I don't believe in the common windows fix of rebooting - I'd
               like to find out WHY this is happening and literally fix it.
ANYBODY have a clue?   Not me...
Thanks for your time.

WebLogic Server 9 with Windows Server 2003 SP2

Hi,
DO you know if Weblogic 9 can work without any problem on a Windows Server 2003 SP2? I looked an i only find that it's supported on Windows Server 2003 SP1.
Hope you can help me
Greetings
Norberto

We are seeing alot of these - using the 'retry' option when scheduling gets the Publication to finish successfully - the log however is full of these messages.
Did you discover anything further Ranjit?
Regards,
Ferdie.

Essbase 11.1.1.1.3 on Server 2003 SP2

Hi,
According to Oracle documentation they only support Hyperion Essbase, EAS, Shared Svcs etc... on Windows Server 2003 SP1. Does anyone know if there are issues with SP2 or if it works etc.. Or if the documentation I'm looking at is old and in fact SP2 is now supported?
Thanks.....

Hi There,
My PC has Essbase 11.1.1.3 installed on Windows Server 2003 SP2 platform. I didn't see any problems.
I think having higher SPs isn't a problem whereas having lower one would likely create issues, may be, right when you're installing the product!
- Natesh

Accessing to Windows Server 2003 SP2 R2 32-bit from a Windows XP SP3 32-bit leaves a fork of the explorer and its children processes !!!

When I try to access to Windows Server 2003 SP2 R2 32-bit from a Windows XP SP3 32-bit and then closes the RDP from Windows XP (the client side), a fork of the explorer and its children processes will persist in the server side !!!
Take a look at the screenshot to understand:
is this normal behavior !?
Thank you for your understanding ;)

Hi,
I think this is normal behavior.
You just close the RDP from client side but not log off the server, right?
Regards.
Vivian Wang
Yes, right I closed the RDP from client side, not log off the server.

JDK issues with Windows Server 2003 SP2 Standard Edition

Hi,
We are running an ETL (Extracts-Transform-Load) Jar file which reads data from MS Commerce Server 2002, AS400 and SQL Server 2000 database and populates a SQL Server 2000 database. The jar was running fine on Windows Server 2000 but started to stall when we are running it from our newly acquired Windows Server 2003 SP2 server class machine. The JDK version is 1.4 on Windows 2000 and 1.6 on Windows Server 2003. Interestingly, the jar is running fine via JDK 1.6 on another Windows Server 2003 dev machine.
The jar does not throw any error and we have to manually shutdown the execution of the jar.
Can anyone please suggest some solutions here?
Thank you!

Um, does this have anything to do with JavaMail? If not, you might try a more appropriate forum.

JDK issues with Windows Server 2003 SP2

Hi,
We are running an ETL (Extracts-Transform-Load) Jar file which reads data from MS Commerce Server 2002, AS400 and SQL Server 2000 database and populates a SQL Server 2000 database. The jar was running fine on Windows Server 2000 but started to stall when we are running it from our newly acquired Windows Server 2003 SP2 server class machine. The JDK version is 1.4 on Windows 2000 and 1.6 on Windows Server 2003. Interestingly, the jar is running fine via JDK 1.6 on another Windows Server 2003 dev machine.
The jar does not throw any error and we have to manually shutdown the execution of the jar.
Can anyone please suggest some solutions here?
Thank you!

Um, does this have anything to do with JavaMail? If not, you might try a more appropriate forum.

Essbase 9.3.1 and Windows Server 2003 SP2

Is anyone successfully running Essbase 9.3.1 on Windows Server 2003 SP2 ?
The documentation I have mentions only SP1, but we'd like to upgrade to SP2 providing no issues arise from doing so.
thanks,
Svejk

There are no problems running on SP2.
Cheers
John
http://john-goodwin.blogspot.com/

Compatibility Exchange Server 2003 SP2 and Domain controllers Windows Server 2008 R2

Hi all, I have this scenario:
- Two Domain Controllers Windows Server 2003 R2 SP2
- Two mail servers Exchange Server 2003 with the following version:
6.5 (Build 7638.2 Service Pack 2)
I want to upgrade my domain controllers to Windows Server 2008 R2.
My question is whether exchange Server 2003 6.5 (Build 7638.2 Service Pack 2) is supported with Domain Controllers Windows Server 2008 R2.
Can you tell me some official Microsoft website where this reflected?
regards
Microsoft Certified IT Professional Server Administrator

Exchange Server 2003 SP2 supports DCs running Windows Server 2008 R2. These DCs should be RWDCs and not RODCs:
Exchange 2003 SP2 will now be supported against writeable Windows Server 2008 R2 Active Directory Servers. Additionally, with the General Availability of Exchange Server 2010, and those looking to standardize on Windows
Server 2008 R2 we have enhanced the supportability of forest and domain functional levels up to Windows Server 2008 R2. This change is effective immediately on Exchange 2003 SP2.
Reference: http://blogs.technet.com/b/exchange/archive/2009/11/30/3408893.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

How to install Windows updates for Windows server 2003 SP2 Manualy

Hi All,
We have 10 machines running Windows server 2003 SP2. These machines are ISA servers kept in DMZ.
So these servers do not have internet access any any means. We are receiving Non compliance for not patching them for specific .NET framework patches. We have installed them but still the Scanning tools says it is not installed.
We have planned to check it through Windows update but as it is in DMZ there is no Internet connection and we also cannot push through WSUS server as well.
Is there any way we can get the update package in Bulk so we can manually patch them rather than manually downloading them 1 by one and installing them ?
Gautam.75801

Hi Gautam,
To achieve your goal, I suggest you set up a WSUS server on the disconnected network, then exporting updates and metadata from a
WSUS server on a connected network and importing all that information into the WSUS server on the disconnected network.
For more detailed steps, please refer to this article below:
Set Up a Disconnected Network (Import and Export Updates)
https://technet.microsoft.com/en-us/library/cc720512(v=ws.10).aspx
In addition, here is a WSUS forum below if there is any WSUS related question:
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverwsus&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Table style doesn't display when viewed or when project is published

I'm running RH8 (with RH8 Server). The table style no longer displays when viewed or when published. I checked the table style of the same project (but older version) and the styles to me looked the same. It displayed fine last week (famous last words), but this week something changed. Can anyone help?
The tablegradient.jpg can be seen in the project (image A), but when I view (eyeglasses), or if I open a published project, it doesn’t (image B).
Image A
Image B

I really do not know what has caused this but in your situation I would be looking at the CSS for the table now and when it worked.
After that I would probably create a new project and create the same setup afresh. That can often identify the cause of problems like this.
Sorry I don't have anything more constructive.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

IE8 doesn't display when opened on Server 2003 SP2

Similar Messages

Maybe you are looking for