IEspChg failing in a script on Win 7

I have a line in login script:
\\server\sys\PUBLIC\IEspChg http://internalpage.domain.com
Ofcourse I can do that by policies, registry entries etc (but that is not the point)
This works perfectly fin on XP with latest client & IE8
On Win7 x86 is just fails (could not execute)
I would like to understand why it fails
If the user runs the command in own context it runs fine (so it is not the issue of rights etc)
Seb

Honestly what difference would that make?
Seb
"Simon Flood" <[email protected]> wrote in message
news:Ie3qt.447$[email protected]..
> On 30/05/2013 21:36, spgsitsupport wrote:
>
>> I have a line in login script:
>>
>> \\server\sys\PUBLIC\IEspChg http://internalpage.domain.com
>>
>> Ofcourse I can do that by policies, registry entries etc (but that is
>> not the point)
>>
>> This works perfectly fin on XP with latest client & IE8
>>
>> On Win7 x86 is just fails (could not execute)
>>
>> I would like to understand why it fails
>>
>> If the user runs the command in own context it runs fine (so it is not
>> the issue of rights etc)
>
> Which version of the Novell Client are you using on Windows 7? Novell
> Client 2 SP3 for Windows (IR1a) is the latest and available @
> https://download.novell.com/Download...d=eqVXi5k_bWw~
>
> HTH.
> --
> Simon
> Novell Knowledge Partner
>
> ------------------------------------------------------------------------
> Do you work with Novell technologies at a university, college or school?
> If so, your campus could benefit from joining the Technology Transfer
> Partner (TTP) program. See novell.com/ttp for more details.
> ------------------------------------------------------------------------

Similar Messages

Install Failed: The following install step failed: run preflight script

I'm trying to reinstall Photoshop CS2 on an intel iMac, OS 10.5.5. I ran the install program, after a few seconds I get the following error message:   "Install Failed: The following install step failed: run preflight script for Adobe Photoshop CS2. Contact the software manufacturer for assistance." (I did contact adobe, but they no longer support CS2) Originally, I had installed PS CS2 when I was using OS 10.4.X, then I upgraded to 10.5.x. PS CS2 was working fine on my system. Then I accidentally deleted the program, now I'm having trouble reinstalling. I'd appreciate any help that you can give me.

I encountered the exact same problem - I had upgraded to CS2 from a previous version of Photoshop, back
when I was using OSX 10.3.9. Later, I upgraded my OS from 10.3.9, to Leopard (10.5.8.)
CS2 always ran flawlessly, through all those systems.
Then I had occasion to reformat my HD and reinstall Leopard 10.5.8.
That's when the CS2 installer failed, with the same message mentioned above.
When I called in, they basically said, buzz off....we won't help you.
First, this shows that their software is flawed.
They managed to allow this problem to occur due to inept programming.
Now they are either incapable, or unwilling, to write a programming fix for this problem.
It reeks olf ineptitude, plus colossal, inexcusable arrogance and disrespect for their customer base.
Just my humble opinion of course...and I've been a Photoshop user since 1990.

SSIS Job is getting failed with an error "0x00000005 : Failed to compiled scripts contained in the package.

Hi All. Could anyone resolve my issue.
I was created a package with an Script task written in VB.Net.
The Package was executing Successfully in BIDS.
But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
"Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 5:12:27 PM Error: 2013-03-13 17:12:32.33
Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
End Error Error: 2013-03-13 17:12:32.33     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
in class 'ScriptMain'., ScriptMain.vb, 156, 22 End Error Error: 2013-03-13 17:12:32.36     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: The binary
code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:34.28     Code: 0x00000005
Source: Formating Excel Sheet Formating Excel Sheet     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. End Error Error: 2013-03-13 17:12:34.28
Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22 End Error
Error: 2013-03-13 17:12:34.29     Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: The binary code for the script is not found. Please open the script in the
designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56     Code: 0x00000004     Source: Checking Alcon Files      Description:
The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56     Code: 0xC0024107
Source: Checking Alcon Files      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:12:27 PM Finished: 5:12:51 PM
Elapsed: 24.336 seconds. The package execution failed. The step failed."
Please give some solution to this.
Thanks in advance

Are you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
/FILE "\"D:\yourPathGoesHere.dtsx\"" /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
line manually:
/FILE "D:\yourPathGoesHere.dtsx" /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
Please write back whether that helps you. David Dye's answer didn't help me at all.

Oracle Open Script - Failed to open script error

I am receiving the following error when trying to open a script in Oracle open script
'Failed to open script' has encountered a problem.Failed to open <script_name>. See error log for details.
I have tried the Giri Mandalika's solution but there is no "<failing_script_name>" folder in specified path.
Can someone please help me to resolve this issue ?

Hi ,You can try deleting the osworkspace folder .The folder should be at C:\Users\<username>\. May be take a back up copy of the folder before deleting it.Let me know if it works.

Install step failed: run preinstall script for DeveloperTools

During install of option install, I received the install failed for DeveloperTools. I am juts starting to use a mac for development and was trying to install all the development tools. How can I get this install successfully?
Full Log entry follows:
Oct 31 23:34:33 Macintosh Installer[1534]: DeveloperTools Installation Log
Oct 31 23:34:33 Macintosh Installer[1534]: Opened from: /Volumes/Mac OS X Install DVD/Optional Installs/Xcode Tools/Packages/DeveloperTools.pkg
Oct 31 23:34:36 Macintosh Installer[1534]: fileURLForURL = x-disc://Mac%20OS%20X%20Install%20DVD/Optional%20Installs/Xcode%20Tools/Package s/DeveloperTools.pkg
Oct 31 23:34:36 Macintosh Installer[1534]: fileURLForURL = file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Optional%20Installs/Xcode% 20Tools/Packages/DeveloperTools.pkg
Oct 31 23:34:49 Macintosh Installer[1534]: Install: "DeveloperTools"
Oct 31 23:34:49 Macintosh Installer[1534]: DeveloperTools.pkg : com.apple.pkg.DeveloperToolsLeo : 4.0.0.9000000000.1.1192168948
Oct 31 23:34:49 Macintosh Installer[1534]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Optional%20Installs/Xcode% 20Tools/Packages/DeveloperTools.pkg
Oct 31 23:34:50 Macintosh Installer[1534]: Create temporary directory "/private/tmp/DeveloperTools.pkg.1534N7IixP"
Oct 31 23:34:50 Macintosh Installer[1534]: Processing DeveloperTools:
Oct 31 23:34:50 Macintosh Installer[1534]: It took 0.60 seconds to create the install plan for DeveloperTools.
Oct 31 23:34:50 Macintosh Installer[1534]: run preinstall script for DeveloperTools
Oct 31 23:34:51 Macintosh Installer[1534]: Install failed: The following install step failed: run preinstall script for DeveloperTools. Contact the software manufacturer for assistance.
Oct 31 23:34:51 Macintosh Installer[1534]: 'Install Failed' UI displayed message:'The following install step failed: run preinstall script for DeveloperTools. Contact the software manufacturer for assistance.'.

"Create the folder "Developer" on your hard-disk."
I already had the Developer folder at the top level of the disk. What did work for me was to not let the install location default, but to actively select the Developer folder. (You may have to modify some permissions for this.) The install was a success and I've confirmed the tools are working.
Good luck!
Mark

Cant upgrade itunesThe following install step failed: run preupgrade script

The following install step failed: run preupgrade script for AppleMobileDeviceSupport. Contact the software manufacturer for assistance

Try clicking on the Apple icon, upper left corner and going to "Forced Quit"
Click in iTunes and then do a Forced Quit.
Try install again. That worked for me.
Gary from Sandy

I keep getting this message when wanting to download latest itunes software update :The following install step failed: run preupgrade script for AppleMobileDeviceSupport. Contact the software manufacturer for assistance. what can i do to download?

The following install step failed: run preupgrade script for AppleMobileDeviceSupport. Contact the software manufacturer for assistance. what can i do to download software when the above message keeps popping up...not allowing me to download

I had the same problem this weekend. The iphone 4s needed Itunes10.5 to sync to her Asus Windows 7 Laptop. When I tried to download from the Apple website I got the error that the windows installer was missings files or something like that. I uninstalled itunes and tried again but that didn't work. Then I redownloaded itunes 10.3 just to have a working version in case I gave up. Then I found site that suggested I update Windows by going through the start menu and while doing that I found an update Apple itunes file.
Goto Start and type Widows Update in the seach window. Click on check for updates (I already was current with all updates but I suggest you download the updates if there are some available.
Goto start and this time just type update in the search window. Look for the Apple itunes update link and click on it. It found there were updates for itunes 10.5, Quick time, Safari, and Icloud. I checked all the updates except for Safari, since we don't use it (yet).
The install started then seemed to stall at one spot for ~3min but then completed successfully. I open itunes and had her synced with Outlook Contact, Email, Calender, and Notes in 5 minutes. I did already configure Outlook by going to tools and Trust Center.
I hope this works.

When I try to install an iTunes upgrade I get this message: The following install step failed: run preupgrade script for AppleMobileDevice Support.

When I try to install upgrades for itunes on my Mac, I get the following message: The following install step failed: run preupgrade script for AppleMobileDevice Support. When this happened before I trashed itunes and started over, but I don't want to have to do that everytime i install an upgrade.

C,
I ran into the same issue. Make sure your apple device in disconnected from the computer. It interrupts the itunes download. Disconnect and make sure itunes is closed, then try installing again. Remember that even though you close of itunes, it is often still running in the background. To make sure it's closed, click and hold the mouse on the itunes icon and select quit from the drop down menu. Then try installing the updated itunes.
Hope that helps.
SoEreal

The following install step failed: run preupgrade script for AppleMobileDeviceSupport. Contact the software manufacturer for assistance.

Just upgraded software. When system prompts to update itunes and in the middle of the system's attempt to complete the upgrade, the message, "The following install step failed: run preupgrade script for AppleMobileDeviceSupport. Contact the software manufacturer for assistance" appears.
I don't understand what "preupgrade" needs to be done.
Anyone else experience this?
Suggestions?

-= Pre Upgrade Script Error with iTunes =-
Do a general web search and you will discover there are many answers, none definitive.
iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier - http://support.apple.com/kb/ht1747
scarier:
https://discussions.apple.com/message/10464515#10464515

Software Install Error: failed run: preflight script

I'm trying to install new software (the software instrument Trillian by Spectrasonics) but every attempt results in the error message:
"The following installation step failed: run preflight script for Trillian Disc 1 Core Library.
Contact the software manufacturer for assistance."
I've tried everything I can think of with no result. I'm a Mac user of 18 years and can generally get myself out of the usual issues etc but I've never seen an error like this before and after trying the obvious have no idea where to start.
There's nothing on the software manufacturer's support site about this and apparently my tech support call will be answered "within three business days .
Any pointers much appreciated.
(I've tried various drives, rebooted various times, done the permissions thing etc)

Thanks for the responses but the software is very much compatible with 10.6 (and is moving to 64bit this month).
Spectrasonics are rather slow to respond ("three business days" for a response to my call apparently !) and I can't find any solution in their support documents online.
The good news is that I discovered a workaround by logging out of my account and logging in as another user, it installed just fine that way, though it took a while to change permissions for my account.
The bad news that it's something in my user account, but I have no idea at what level.
Whatever it is is still there and I don't know what other effect it's having on my setup and and I can't find any fix or pointers about it anywhere, although I have found numerous references to users having the same problem trying to install software in OS X as a whole (not just 10.6).

The following install step failed: run preupgrade script for AirPortUtility. I have been getting this error whenever I try to do a software update on anything.

Each time I try to run a software update... I am getting these error messages so I am never able to upate.
The following install step failed: run preupgrade script for AirPortUtility

=Pre Upgrade Script Error with iTunes=
Do a general web search and you will discover there are many answers, none definitive.
iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier - http://support.apple.com/kb/ht1747
scarier:
https://discussions.apple.com/message/10464515#10464515

I can't install Komplete Elements. I got the message Install Failed. The following install step failed: Run postflight script Kontakt 5 Content.

When I tried to install the free copy of Komplete Elements that came with my Komplete Audio 6 Interface I got the message : Install failed. The following install step failed :Run postflight script 5 Content. I was able to insall the Audio 6 drivers but didn't choose to load Traktor or Cubase LE because I use Garageband.
I have a Macbook. Running version 10.5.8. GHz Intel Core 2 Duo.
I tried the url their tech support sent me but that didn't work either.
If this is not the right forum please redirect me.

Thanks for answering. The weird part is that I was able to install Audio 6 and record my bass but Elelements won't install at all. When I orginally ordered it the site said that Elements would run on 10.5.8 but I guess you're right. I am going to have someone check it out later today. I'll let you know what happens. If you only want the Audio 6 Interface they sell it for $229 at Music123. I shouldn't complain because Elelements was free but the more I looked into it the more I became interested.. Another strange thing is that I told Komplete tech support I had 10.5.8 and they never told me it wouldn't work.

Error Message: "Install Step Failed:run postflight script for Plugin" When Flash Player 11.7 instal

Don't See Question/Problem w/Flash Player Installation. Error w/11.7.700.260 Installation had errors (dialogue box) The following install step failed: run postflight script for Plugin.Contact the Software Manufacturer for Assistance. Please Note: I have read all Adobe Links related to installing Flash Player and uninstalling previous version 10.3 for MAC OS 10.5. So I have MAC OS 10.5.8 w/Firefox Browser 16.0.1 and disabled anti-viral software. Uninstalled previous version of Flash Player 10.3. Confirmed uninstallation. Downloaded Flash Player 11.7.700.260 instead of 10.3.183.90 due to Adobe stated information re:replacement of 10.3 versions with 11.7 extended support. Installation of 84% occurs then the Error Message: Installation had errors (dialogue box) The following install step failed: run postflight script for Plugin.Contact the Software Manufacturer for Assistance. Please help to resolve this issue as no flash player is currently on my MAC. Thank you so much.

Hi Mike,
First of all, thank you so much for responding and sorry I forgot to mention my CPU; fortunately I **DO** have the 2.6 GHz Intel Core 2 Duo Processor so I could upgrade to Mac OS X Snow Leopard. Two Questions:
1. Do you know whether Snow Leopard sold by Apple is an upgrade or "clean install?" If it's not a clean install, do you know (off-hand) if there are any upgrade issues? I'm very partiall to a clean install.
2. Why does Adobe state (for updating Flash Player 10.3 when Adobe knows that [most likely] the 10.3 versions run on Mac OS 10.5.x? See statement and link below...
Kindest thoughts - Karolynn_1
http://blogs.adobe.com/flashplayer/2013/05/extended-support-release-updated-to-flash-playe r-11-7.html
We’re happy to announce that we are updating the version of our extended support release to Flash Player 11.7 on Mac and Windows. Flash Player 11.7 will replace version 10.3 as the extended support version beginning July 9, 2013.
In order to continue receiving security updates, an upgrade to either Flash Player 11.7, or the standard Flash Player 11.8 release is required.
Flash Player 11.7 provides exciting new features, including Actionscript concurrency, webcam support for StageVideo and more. It also enables Protected Mode for FireFox on Windows, a sophisticated security-in-depth feature. With Protected Mode, Flash Player runs as restricted process, making it more difficult for attackers to build working exploits. Click here to learn more.
Flash Player 11.7 leverages hardware acceleration for audio, video and rendering to increase performance and lower CPU usage.
To ensure the smoothest possible transition, we encourage IT organizations deploying Flash Player 11.7 in managed environments to thoroughly test audio and video playback for critical use-cases using the latest available version before deploying this release widely. When hardware-related playback and stability problems do arise, updating to the latest hardware drivers frequently resolves these issues.As a secondary workaround, the Flash Player Administrator’s Guide details mechanisms for disabling hardware and audio acceleration via mms.cfg.
We have been hard at work to make Flash Player better than ever, and we look forward to continuing to serve you with a great web experience.

Error: Failed to load script file; java.lang.ArrayIndexOutOfBound.Exception: 3184

Script editor was working find when I last used it last week. Tried to open a script today to make some changes and now I'm getting this error message. I have uninstalled and re-installed editor, checked the compatibility mode and it wont open the script. any ideas out there what the problem could be? need some trouble shooting help.
Error:
failed to load script file: java.lang.ArrayIndexOutOfBound.Expception: 3184
Thanks
Lora

Hmmm....   I haven't seen that, but I can tell you what I would do if I were you. This is kind of drastic, but the alternative may be a workstation reimage.
Open the windows control panel, and open the add/remove programs snap in.
Uninstall the CRS editor.
Uninstall all the JRE instances you have. They may be listed as something like Java (TM) update....   or they may appear as J2SE Runtime....   Check in the J's (it's alphabetical) and uninstall all of them.
Reboot the machine.
Download and reinstall Java 1.6.0.17   (This is what's running on my workstation right now, and it works with the editor).
Reinstall the CRS editor
Reboot the machine
Try it and see if it behaves. If it doesn't, you may need to rebuild the whole thing.

Failed to load script class for script ...

We are trying to run a script in Thin Client mode, recorded in Oracle Functional Testing,
But get: "Failed to load script class for script ...".
Anyone has any tips for what we should check to solve this problem?

Hi,
There was no option for "java client", and it was set to "thin client" by default.
Anyway, changing the setting back and forth between "thick client" and "thin client" solved the problem.
Thanks.

IEspChg failing in a script on Win 7

Similar Messages

Maybe you are looking for