If a call comes in while adding a contact or editing a contact all info is lost and have to start again.

If it's happening on multiple devices the only thing I could suggest is a downgrade to 10.2.1 if the issue becomes too bothersome. Make sure to do a backup before downgrading as you will lose all information.
1. If a post has helped you, show your appreciation by clicking Like at the bottom of the message box.
2. If a post has solved your question, please click ''accept as solution'' to verify your question has been solved.

Similar Messages

I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing.

I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing the existing. This is irritting.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

I added a contact to my iphone 4s and when I did a sync manually it is not showing up on my MAC in address book - please help....I checked off sync all contacts in iTunes - does it only work one way from computer to phone?

I added a contact to my iphone 4s and when I did a sync manually it is not showing up on my MAC in address book - please help....I checked off sync all contacts in iTunes - does it only work one way from computer to phone?

Is it because the new itunes looks different.
View > Show Sidebar
Then it should work just the same as on your old computer.

HT201263 My IPhone 4 won't restore from recovery mode, it comes up with corrupted file message and I have to start again but it still doesn't work. Tried this about 10 times. Please help?

My I phone 4 has put itself into recovery mode and I cannot now restore it. I have plugged it into I Tunes about 10 times and every time it starts to restore then comes up with the message Corrupted file start again. Please help.

Try restoring as a new device first.

The keypad does not come up while adding new phone number to contact

I use iphone4. After I upgraded to ios7 finding lot sof issues. The biggest irritating issue is if I want to add a new number (after dialing this number or receiving a call from this number or receiving a sms from this number) and press add to contact, the contact place holders come up but if i click on the typing place the soft keybord does not come up. Funny thisg is it comes up sometimes. But not most of the time ! Lets solve this first before we get onto the more nuanced issues.

Try going to settings to General to reset to 'reset all settings'
This should do the trick!
Good luck

Crash while adding new Contact to Address Book

When I add a new contact to my IPhone 4s Address Book ("Contacts") it sometimes crashes if you enter all the information and tap "done". It doesn't crash if you first enter the first/last name - tap done - open the contact and edit it. After "Contacts" crashes the new entry is not saved.
It is very annoying especially if you are on the go or you ask the person 3 times for their contact details...

Tell me about it... I always save after entering the name THEN I edit it again to add the number .. save .. and add additional details like email etc

Crashed while export and won't start again...

Hi guys, i just want to ask, why my PPro, doesn't want to start, it only shows the startup and then shows the application with white screen, after that it closes by itself. no error message or anything. it started when my laptop crushed while i exporting the movie. the screen went crazy. so i shut down the laptop. after that my PPro CS3 won't start. i try to uninstall and reinstall, still the same...now i've tried the CS4, but still won't work. still remain the same. what's the problem...can anyone help me?it's been 4 months i tried to solve, but still got nothing. please help me...

Ok...sorry, i'm new in this kind of things. or i can say, this is my first posts in this kind of forum...
I'm using Laptop. it's ASUS F8VrOS : Windows vista Home premium;
Platform : intel centrino 2;
Processor : intel core2 duo P8600 2.4 GHz;
Chipset : mobile intel PM 45 Express + ICH9M + wiFi link 5100;
Memory : DDR2 800 MHz, 2 GB;
Screen : 14,1 inches WXGA+/WXGA;
Graphic system : GPU ATI mobility radeon HD 3470, 256 MB memory;
HDD 250SATA; anything i didn't mention?
ok, the case is, i use Adobe Premiere Pro CS3 before. i was using it doing my personal project, basically only combining .avi video. it's finished, and then i want to export it as a movie. but when it's still rendering, my laptop crushed, the screen went crazy (looked so colorful(u know what i mean?^^)), then i couldn't do anything. so i just shut it down forcefully. since then on, i can't use the PPro anymore. i've tried to reinstall, still the same. the startup screen still appear (the loading of all .prm file), but when the application come in, it directly shuts down. with no error message. i also install the PPro CS4, but still the same...is it my laptop or the PPro?
any info i didn't give you, just ask...
sorry, newbie.....
thanks for amending me...^^

When my MAC has been in sleep mode for a while and you try and get it started again the mouse makes a splotchy movement across the screen and i have to reboot

When my MAC has been asleep for awhile and I move the mouse it makes this digitized blob run across the screen and erases all below it. The only way I have found to get it to quit is restart the computer. Does anyone know what is making it do this?

okay, you know this is for the Mac pro (desktop mac) rather than the MacBook pro, right? That being said, sounds like you have a problem. Turn off your screensaver, if it's on. if it's a hardware problem, eg the GPU, then take it in. If it's software, try running disk Utility and repair permissions. Failing that, get out your original install dvd's, boot up from them, and try "Archive and Install"
John B

When you update an ipod touch does all of the pictures and music come back?, When you update an ipod touch does all of the pictures and music come back?

I just want to know if you can get all of your pictures back when you update an ipod touch?

All of your music, apps, photos, videos, etc, should reside on your computer, not just on your easilly stolen,, lost or damaged prtable device.
A normal update, or even upgrade, restores all your settings and data from the backup thats created at the start of the process. Even if something goes wrong, you can sync back everything from your computer.

SPA 512 phones locking up/freezing when another call comes in.

It doesn't happen every time but several users are reporting phone freezing when another call comes in while they are on the phone. We have two UC560's under one roof doing this, one using 3com switches and one using Cisco switches, the two (UC560) networks are completely segregated. We have swapped out some phones thinking it might be a bad phone or two but the problem is still ongoing. Phones are on the most current firmware that pulls automatically when they are first plugged in.

Hello James,
You have to upload the firmware via the drag and drop method in CCA. In the Topology View, use the mouse to drag the phone load (.zip or .bin) file from your PC and drop it onto the UC500 icon. For Cisco SPA500 Series and 300 Series phones, you must extract the .bin file from the archive before dragging and dropping it onto the UC. Make sure you can ping 10.1.10.2 which is the TFTP interface of the UC.
Thanks,
-john

The external credentials in the SSO database are more recent --- Receiving this error while adding entries to SSO database.

We are getting this error while adding entries to SSO database. Its working in other environments and failing in only environment. Please advice.
error MSB4018: The "BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty" task fa
iled unexpectedly.\r
: error MSB4018: System.Runtime.InteropServices.COMException (0xC0002A40): The external cre
dentials in the SSO database are more recent.\r
error MSB4018: \r
error MSB4018:    at Microsoft.BizTalk.SSOClient.Interop.ISSOConfigStore.SetConfigInfo(St
ring applicationName, String identifier, IPropertyBag properties)\r
error MSB4
018:    at BizTalk.BuildGenerator.Tasks.SSO.SSOConfiguration.Write(String appNa
me, String propName, String propValue)\r
error MSB4018:    at BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty.Execute
()\r
error MSB4018:    at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.IT
askExecutionHost.Execute()\r
error MSB4018:    at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExe
cutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost t
askHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskRe
sult)
Thanks, Pavan MCTS-Microsoft Biztalk Windows Server 2010

Hi,
This error generally arises when your system datetime is not in sync with the Domain Controller datetime. Try following steps:
1. Check if the Windows Time Service is running on your machine or not. Try restarting this service and then restart host instances. Then run your script.
2. If this does not works, have a look at this
link
Hope this will help.
HTH,
Sumit
Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question

AddRequestObject has been deprecated while adding a resouce to a request

Hi Friends,
I have created a schedule task to create a request and to add users to it and also to provision a resource to the user. It is creating a request and adding a user successfully.
But while adding resource to the request by using the correct request key and object key, I am getting a compilation error.
This is the statment I am giving "requestIntf.addRequestObject(reqkey,objkey);"
I am getting the compilation error as "addRequestObkect(reqkey, objkey) in Thor.API.Operations.tcRequestOperationsIntf has been deprecated"
Did research in google but did not find anything. Can you please let me know what I am doing wrong.

Using API : - you can use tcFormInstanceOperationsIntf api method setProcessFormData
setProcessFormData
public void setProcessFormData(long plProcessInstanceKey,
java.util.Map phAttributeList)
throws Thor.API.Exceptions.tcAPIException,
Thor.API.Exceptions.tcInvalidValueException,
Thor.API.Exceptions.tcNotAtomicProcessException,
Thor.API.Exceptions.tcFormNotFoundException,
Thor.API.Exceptions.tcRequiredDataMissingException,
Thor.API.Exceptions.tcProcessNotFoundException,
tcAPIException
Sets the process data associated with an instance of a process in the system. If the process data already exists, then it updates the data with the specified values. In the case of a first-time save, all the required data must be provided. In the case of subsequent saves, only data being updated need be provided.
Parameters:
plProcessInstanceKey - The key of the process instance in the system.
phAttributeList - An array of tcMapping objects, each used to specify the attribute name-value pairs to be used to save data to the form
Throws:
tcAPIException - an error code of DOBJ.USR_PASSWORD_DOES_NOT_MATCH_POLICY might be set within this exception. If that's the case, one or many password policy rules were not met for password field in the form.
tcInvalidValueException
tcNotAtomicProcessException
tcFormNotFoundException
tcRequiredDataMissingException
tcProcessNotFoundException

Adding a contact photo to a contact on iPhone breaks ActiveSync to Exchange

This is a weird one... I have a user who has an original iPhone, we just upgraded her to 2.0 a week ago. She noticed that she lost her contact photos when we replaced her contacts with those stored on exchange. She added them back to the contacts on the phone and everything appeared fine. The problem came when she went to add an email address to a contact (which had a photo). It did not update on the iPhone.
Adding a contact on the iphone synced, and modifying a contact that did not have photo synced. Modifying a contact on the computer (one which was not syncing to phone) synced to webmail, so that part of the sync (desktop to exchange) was working. If you remove the picture, it starts syncing again. Issue persists in 2.0.1.
I will test on a iPhone 3G tomorrow and see if the problem persists on all phones and exchange accounts. Can anyone verify this on their setup? If it is not a problem for you are you using exchange 2007?
Thanks!
Setup:
Exchange 2003 SP2
Entourage 2004
First Gen 8GB iPhone
Workaround:
Either remove photos, or disable active sync for contacts, enable syncservices to sync to OS X address book, and sync via cable.

UPDATE: OK, today I tested with 3G iPhone, and there is no issue at all syncing (in fact, the contact picture appears as an attachment to the contact if viewed in webmail).
I then setup another 1st Gen iPhone to the same exchange server, add a photo to the contact, made a change to the contact, and have the same problem -- no sync after photo added, syncs when photo is removed. I even deleted (from Entourage) a contact that I had added a picture to on the phone, and that change did not go to the iphone until I deleted the photo (Waited about 5 minutes). About 20-30 seconds after deleting the photo on the contact, it recognized that the contact was deleted from the exchange side, and pushed the deletion to the phone where it when poof right before my eyes like it's supposed.
This is kind of baffling since you'd think the software is the same between the first gen and 3G after 2.0, but the problem is very re-creatable for me...]

Error while calling COM routines via application prog(return code 1028533-)

Hello Expert,
In Interactive Demand Planning ( /SAPAPO/SDP94 ), when I'm trying to load data in a planning book , error
'Error while calling COM routines via application program (return code 1028533-)' is encountered.
In my selection id, i have only two locations....there is no material selection.
When I select the 1st location and load the data its getting loaded properly.....but when i select the 2nd location and try loading data ...the above error is coming.
I did run /SAPAPO/TS_LCM_CONS_CHECK but the problem persist.
Any advise to fix this issue would be much appreciated.
Thanks.
Tom

Hi Tom,
Please see if below exiting threads help you.
COM error 40134 in Interactive Planning on SCM 5.0 Support Pack SAPKY50011
Error for COM Routine application program (return code 40028)
Thukral

While listening to itunes on my iphone I don't what the music to stop when a call comes in

while listening to itunes on my iphone I don't want the music to stop when a call comes in

That's the way it works. If you don't want to be bothered with calls while you're listening to music, put it in airplane mode.

If a call comes in while adding a contact or editing a contact all info is lost and have to start again.

Similar Messages

Maybe you are looking for