If a network is going to include a wireless MacBook Pro and hardwired PC..
..does the setup utility need to be run on both of the computers? My Mac works fine, but the PC, while online, doesn't recognise my USB printer or the network by it's name.
"If a network is going to include a wireless MacBook Pro and hardwired PC, does the setup utility need to be run on both of the computers? My Mac works fine, but the PC, while online, doesn't recognise my USB printer or the network by it's name."
I just finished setting up the same configuration. It took me two days, but I was finally successful. I DID run the setup utility on both computers.
For comparison, here is my arrangement: I have a dsl modem (dynamic IPs) that was connected to the pc (Windows XP with SP2), and is now connected to the base station wan port.
Before I set up the airport extreme, the printer was connected directly to the pc via a usb cable, and working fine. Now the printer is connected to the base station, and the pc is connected to the base station via ethernet. I am able to print from both the pc, and wirelessly from the mac.
Here are some ideas:
(1) In AirPort Utility, I used manual set up instead of the assistant. I tried initially to set up the base station from the pc, but finally gave up and used the mac to set up the base station. That went fine.
(2) I set the base up as a bridge.
(3) I did not use any of the pc set-up wizards (they did not seem to help).
(4) AirPort Utility allowed the pc to see the network.
(5) I used Bonjour to help the pc find the printer.
I went down many dead ends with the pc before I got the set up to work. If you tell me more, I may have more ideas.
tapcam
One more thing: I have a related question. We have protective software on the pc, but I've never used it on the mac. Will bad "stuff" now be able to get from the internet to the mac to the pc, or will the pc still be protected? I'm new to all this.
tapcam
Similar Messages
-
Apple devices will not print to Officejet 6700 including MacBook Pro and iPad
I am trying to help someone set up their MacBook Pro and iPad to be able to wirelessly print to their Officejet 6700. I recently set them up with a new Apple Airport Extreme for their router. The printer connects fine to the wireless network. Everything during the install process for the printer goes well, the MacBook easily sees the printer. The correct driver is installed. They also have a Windows 7 laptop that prints instanteously and has no issues whatsoever.
When I try to print from the Mac, nothing prints. I open the print queue and it shows "Printing - connected to printer..." and nothing ever comes of it. When trying to print from the iPad, it can see the printer and I select it. However, after telling it to print, the dialogue box just says "Connecting to Printer" and it never does - it just times out.
Things I've tried:
Everything in this article that is related to Macs (10.8).
Resetting the printing system on the Mac.
Resetting the printer to default settings.
Setting the static IP of the printer through the printer settings.
Setting the IP of the printer through the Airport Utility (after changing the printer to automatic).
Rebooting the Mac after each attempt to remove the printer and before adding again.
Using the official HP Officejet 6700 driver.
Using the Airprint driver.
Other info:
I can successfully ping the printer's IP address from the MacBook Pro.
I can easily see the web setup page for the printer both through the printer settings and by entering the IP address.
The printer is only about a month old.
They bought this printer because the previous one was having problems printing from all of their devices wirelessly. That was with a router from their previous ISP.
At this point, I'm completely stumped as to why the printer will not print from these Apple devices. We've dealt with every issue that could be causing it: the network, the printer, and the MacBook itself. I've looked online and can see no issues with people not being able to print to a wirelessly connected printer to an Airport Extreme. I've seen some issues when the printer is plugged in via USB to the Airport Extreme, but that is not our setup.
Any help would be greatly appreciated!!!!
This question was solved.
View Solution.Thank you very much for your help @Sunshyn2005!!!!! I think we're good to go now!
-
I am going to buy myself a MacBook Pro in the near future and was wondering if the new Retina Display model would be worth the extra cash. I will mostly be doing photo/video/music editing.
if you're not in a big rush - why not hold off until Adobe and Microsoft releases an update to support the Retina Screen.
Don't get me wrong - the Macbook Retina is a good and videos look great - but when it comes to Photoshop, it's a little blurry and the fonts in Excel and Word is pretty blurry too.....I own one....
In any event, if it's something you can live with - then by all means - go for it.....
Otherwise - get the non Retina Macbook Pro - it's cheaper, and it's user upgradeable in both RAM and Hard Drive.
Good luck. -
I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?
Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look normal when I first open them in photoshop. I will edit, save, and then realize once i've sent it to myself to test the color is WAY off. This only happens in photoshop. I've read some forums and have tried different things, but it seems to be making it worse. PLEASE HELP! Even viewing the saved image on the mac's pic viewer is way off once i've edited in photoshop. I am having to adjust all my colors by emailing myself to test. Its just getting ridiculous.
Check the color space in camera raw, the options are in the link at the bottom of the dialog box. Then when saving make sure you save it to the srgb color space when sending to others. Not all programs understand color space and or will default to srgb. That won't necessarily mean it will be accurate, but it will put it in the ballpark. Using save for web will use the srgb color space.
-
My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly? My printer is a Brother MFC-J270W
try disabling email scanning for incoming mail.
One of the last things that occurs is the mail server and Thunderbird sign off on "where we are up to" and Thunderbird stores this state information in the popstate.dat file in your profile (there is one in each POP mail account folder). If the anti virus, or you for that matter, end the conversation a few seconds early that hand off does not occur and the popstate is not stored. -
My itunes keep saying The folder “iTunes” cannot be found or created, and is required. The default location for this folder is inside the “Music” folder.iTunes needs a library to continue. You may choose an existing iTunes library or create a new one. please help i presschooseexisting cuase i have one but then it says this The file cannot be found or created. The default location for this file is in the “iTunes” folder in the “Music” folder. please help
I was cleaning my macbook pro and i deleted all my files including itunes
Restore your computer from your backup. -
Problems browsing on home network on my macbook pro and Air
I own a home network and unfortunately, we are having problems browsing using Safari or Firefox on the Macbook Pro and Macbook Air. The notebooks are able to connect well and also receive emails, but its only the browsing that cannot be done.
We also have a windows based laptop which works perfectly well.
My Iphone works well too !
Can someone assist.Go into your System Preferences > Network Advanced>TC/IP and turn off IPv6
reboot and try again.
https://support.apple.com/kb/HT4669
https://support.apple.com/kb/TS3802 -
I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.
How can I access the password or, if necessary, reset it.
Read the user manual that came w/your Airport router or you can cross-post in one of the AirPort Forums for instructions. -
I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however it is asking for my serial number which I have misplaced. I am unable to trace my serial number anywhere. I have even checked my adobe membership to locate my serial number but it does not seem to have any record which is strange as I have been using this software for over a year now and the previous versions since 2009. Could someone help me in my predicament.
Contavct Adobe support thru chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.
Fixing this is a two step process:
1) System preferences > WiFi/Airport ...
... check [√] Ask to join new networks
"Known networks will be joined automatically.
If no known networks are available, you will
be asked before joining a new network."
2) Remove unwanted networks from the list of "known" networks under
System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules. -
I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive
How do I set up Time Machine to a shared drive on another Mac?
-
New macbook does not "see" my network, old macbook pro and iphones do...
Yesterday I installed an upgrade to my airport extreme base station, now my macbook pro and the 2 iphones in the household see the wifi network but the other macbook does not. It does see the neighbors wifi networks and will see it when I connect via a cable to the base station by no wireless connection... help!
I am having a similar problem. I have 19 iBooks in a classroom and, suddenly, none of them can see the AirPort Express network when they log on. Instead, the iBooks try to connect to a Windows-based school network. I have designated the AEBS network as the only preferred network but the iBooks NEVER try to connect to it first. However, if you click on the AirPort icon in the menu bar, the AEBS network is clearly visible and clicking on it immediately connects you to the AEBS network.
When I originally set up the network in January, everything worked just fine. After the upgrade to AE Firmware 5.7 and various OS X 10.4.5 updates, everything has gone downhill. I had the dropped signal problem that so many have reported. I downgraded to AE Firmware 5.5.1 and followed J. Exby's procedure to upgrade the AEBS framework. That solved the dropped signal problem. But now my iBooks cannot find the AEBS network when they log in.
I have set the AirPort Network Preferences to connect Automatically or to Preferred Networks with the same result. I have also set the option to "Keep looking for recent networks" and it never finds our AEBS network. Yet, the network can be accessed manually through the AirPort icon.
BTW, I use one of the iBooks myself and it works perfectly and finds my preferred network in 2 other locations with non-AEBS networks. But it cannot see its own preferred network in school.
This is really bugging my students--and me! Any suggestions? THANKS! -
i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!
<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html> -
I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8
Maybe you are looking for
-
Using property with geocode in record filters/range filters
Hi All We have created a property called "Location" with data type as "Geocode" and we are able to use the same in sorting.And ,this will generate two dynamic properties by name "Kilometers_to_Location and "Miles_to_location".Is there a way to use th
-
XDP - open PDF with #toolbar=0 problem in IE
Hi When opening PDF's using a correctly constructed XDP I specify at the end: <pdf href="some.pdf" xmlns=http://ns.adobe.com/xdp/pdf/ /> Everything works correctly in all browsers. I would like to hide the toolbars so when I change the href to: <pdf
-
How to save a shorter version of a movie for facebook upload
I have several movies that have already been exported to YouTube, but I now want to share those same movies with facebook. Since facebook has a 2 minute limit, I will have to do some editing to cut down the length of these movies and also export them
-
Help...I'm trying to print address labels from an existing Excel document that opens fine in Numbers. I don't want to print everything from the spreadsheet. The Avery template and site were no help. Any suggestions?
-
Creating Actions - Interaction Center WebClient - SAP Library
To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English. You can also go back to the SAP help page.