If and how a clip can be retouched/edited

Hello,
I’m not sure whom to ask this question and I can’t seem to find an answer online, but I have a video capture of two people to be used on a web site. The woman in the clip has a design on her t-shirt that we would like to remove so it looks like a solid color shirt. The rest of the shirt is solid, but the hands overlap the logo in various places. Is this type of replacement possible with FCP 6? If so, how would I find out if this can be done and how to do it or find someone who can? This is a 2 minute clip for web play.

Yes...but. This will take masks and crops, keyframes and layers especially considering the woman's hand periodically moves in front of the logo. It will take time.
Would it make sense to place an informational banner or a more subtle branding type graphic over the offending logo? If not, there are all shorts of talented people from all over the country right here in this forum that could help you do this with or without FCP. They are not supposed to sell their services here, but you can figure out who's in your area and send them an email if it's in their personal profile.

Similar Messages

  • How far will the extreme reach and how many users can be on there at the same time?

    How far will the airport extreme reach and how many users can be on there at the same time?

    Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
    The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
    A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
    But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
    So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
    Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
    The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
    If you find that the signal does not reach as far as needed,  you will need to add additional "extenders", like an AirPort Express to provide more signal coverage.

  • I'm a school tech coordinator. Many computers and many iPads. How many Apple IDs can I have per device, and how many devices can have the same Apple ID? To make my life easier, I'd like 200 devices to all use the same Apple ID.

    I'm a school tech coordinator. I have many computers and many iPads. I apologize if there is a some place that has all the rules governing the use of Apple IDs. I looked, and I even tried to get the answers from multiple Apple rep's. I couldn't find the answers.
    How many Apple IDs can I have per device?
    I want to use the same computer to sync and backup many iOS devices. The iOS devices would be associated with different Apple IDs.
    I may load apps under a school Apple ID and have users load their own apps under thier own ID.
    How many devices can have the same Apple ID?
    Can I use the same Apple ID on all the computers in a lab?
    Can I use the same Apple ID on all iPads for a particular grade level?
    Are the rules different for iOS devices and computers?
    I know that there are limits on "authorize" and "de-authorize" and how frequently those things can be done.
    Recently I heard that for the life of an iOS device, it can only be associated with five Apple IDs. That is not good for a school giving iPads to students in a 1:1
    To make my life easier, I'd like 200 devices to all use the same Apple ID.

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html
    It would be best to address your questions there, especially since this is a public forum, and over there you could post more private issues with this set-up. Not to mention, getting more official answers.

  • Cffunction and how to ? can someone explain the code to me line by line

    Hello i went to get this online and i want to test it.
    the udf is supposed to
    * CSVFormat accepts the name of an existing query and
    converts it to csv format.
    * Updated version of UDF orig. written by Simon Horwith
    my question how to break it down.
    can someone explain the code to me line by line
    thanks

    silviasalsa wrote:
    > thanks
    >
    > but line by line
    >
    > what is
    > if(ArrayLen(Arguments) GTE 2) qualifier = Arguments[2];
    > if(ArrayLen(Arguments) GTE 3 AND Len(Arguments[3]))
    columns = Arguments[3];
    > returnValue[1] = ListQualify(columns, qualifier);
    > ArrayResize(returnValue, query.recordcount + 1);
    > columns = ListToArray(columns);
    > for(i = 1; i LTE query.recordcount; i = i + 1)
    > {
    > rowValue = ArrayNew(1);
    > ArrayResize(rowValue, ArrayLen(columns));
    > for(j = 1; j LTE ArrayLen(columns); j = j + 1)
    > rowValue[j] = qualifier & query[columns[j]]
    & qualifier;
    > returnValue[i + 1] = ArrayToList(rowValue);
    > }
    > returnValue = ArrayToList(returnValue, Chr(13));
    > return returnValue;
    > }
    >
    > thanks
    Apparently this UDF takes two optional parameters so that one
    can define
    (A) a text "qualifier" to use in the CSV file, this is
    usually the
    single quote|tick ['] mark - but sometimes one wants this to
    be a
    different character and (B) what columns to use in the
    output in case
    one does not want to use all the columns in the record set
    in the
    outputted CSV file.
    The if statements are checking for these optional parameters
    and if
    found setting the values in them to internal variables.
    These
    variables are then used in the rest of the logic to create
    the CSV output.
    HTH
    Ian

  • Does anyone know if you can track a tolen i phone and how if you can please

    hi can anyone tell me if can track a stolen i phone 4 and if o how please?

    If he's not there, you would not be able to get the account information necessary to log into iCloud (or MobileMe, if it was set up a while ago) to do the tracking. So there's nothing we here can tell you that will be of help to you.
    Regards.

  • I can't load any apps bc it says i need iSO4.3, where do I get this download from and how?, I can't load any apps bc it says i need iSO4.3, where do I get this download from and how?

    I can't load apps because my Ipod says that i need iSO4.3 operating system in order to do this.  How do i get this on my ipod?  Thanks

    Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
    Also see:
    Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews
    Many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.

  • I own the original Ipad and I want to remove an application where do i go to do that and how? I can't find it like on my laptop...THanks!

    I own the first Ipad orginal...my question is how do I remove an application that I loaded...it was not a good FBK app and I have the "correct" FBK app now but do not know how to remove the application loaded that was bad off? Thanks! Its not the same as my laptop...just started using the Ipad...won it 2 yrs ago and just took it out of the box!!!! Its driving me crazy too..."it crazy!"

    Hold down the Apps for a second or two until you see the X. Tap on X to delete.
    http://i1224.photobucket.com/albums/ee374/Diavonex/6f172bf9.jpg

  • Can  you move your notes from one iphone to another and how?

    Can you move your notes from one iphone to another and how?

    You can do this a couple ways.  If you are using MobileMe, notes is one of the options for synchronization and that would be automatic.  Another way is to backup your iphone to iTunes, this backs up essentially all the information on your phone (except for music) and if you restore the other iphone to the image of the original your notes will be transfered.

  • What are some of the best iOS apps can remotely played videos, audios, photos and text files from a NAS hdd connected to Airport Extreme USB port? And how to configure this setup?

    I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?

    *Edit - I am not able to connect to the NAS when hardwired to the airport extreme.

  • My iphone 4 screen has been smashed how can i get it replaced and how much

    hi my iphone 4 screen has got smashed how do i get it fixed and how much i can get it changed december because i have had it 24 months but i am finding it hard to see screen as i use it for work so staff can get intouch.

    In the U.S :
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5
    $229
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax. "

  • HT1825 Can I connect post cinema displays to my G4 and how?

    Can I connect post cinema displays to my G4 and how?

    You can use newer monitors but there are different ways to connect.
    It all depends on the video card installed in your computer. Different model cards had different ports. My G4 MDD has the ATI Radeon 9000 with one ADC port (abandoned technology) and one DVI port (useful technology). So we need to either see the description of your graphics card from System Profiler >Graphics/displays, a photo of the ports on your card, or both.
    As long as you find a monitor that shares the kind of ports on your Mac, you will be fine. I have a 2008-vintage LCD monitor on that circa 2003 MDD of mine. The MDD shipped with an Apple DVI-to-VGA adaptor so I can connect any monitor with DVI or VGA ports.
    There is an inconsistency in your equipment profile: No PowerMac can run OS 10.6. Please do "About this Mac" and verify your processor type and Mac OS version. Then you can edit your profile to avoid future confusion.

  • HT3728 I do not need another wireless network but want to use the airport express for printer access only.  Can this be done and how?

    I do not need another wireless network but want to use the airport express for printer access only.  Can this be done and how?

    You can configure the AirPort Expess to "Join a wireless network" and enable the Ethernet port so that Ethernet devices will be able to connect.
    In order to print from the iOS devices, you will need to have an application like Printopia installed on your Mac. The Mac must be active when you want to print.
    More details here: Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
    There is a free trial available for Printopia, so make sure that it will work before you buy the AirPort Express.

  • Where is face information stored, and how can it be exported

    I don't have the product yet, but after hearing our photographer's rave review of the faces feature, I'm wondering where iPhoto stores the faces information... and how that info can be exported.
    does it get tagged in like exif info, or can the program export a per-file xml piece of information, or what?

    If you are interested in mucking arond with iPhoto databases, I think you might be able to extract the information.
    One way that will work is to create a smart album with the name of the person. This will create an album that is always up to date with that person's photos. You can then parse out the photos from the AlbumData.xml and figure out which photos have which that person in it.
    Another way that doesn't involve creating smart albums (if you don't want those to clutter iPhoto) is to look at the face.db file. This file is an sqlite3 database that contains information about all of the "faces" in your database. You can see the contents of the database with the command
    /usr/bin/sqlite3 face.db .dump > dump.txt
    I haven't figured out what all of the fields are, but I'm sure that there are lines that contain ID numbers for the photos (which you can get from the AlbumData.xml file). I'm sure that someone will publish how to extract what you need from this file at some point (of course this is hacking around in the internal database from iPhoto which can easily change at any time). I haven't reverse engineered the format yet, but might do so at some point (I am also very interested in this information).
    Ron

  • HT1353 serial number 4H*******ZR1, can u tell me what kind it is and how do you charge it?

    Serial number 4H*******ZR1, can u tell me the type of I pod it is and how do u charge it.
    <Edited by Host>

    We're sorry, but this serial number is not valid. Please check your information and try again.

  • How many times can i download 2.1?

    I bought a 2.1 update in the itunes store on my computer. But it has been download for many times and never succeed. So i wanna know whether downloading it for several times costs more money? And how many times can I download it?

    I can't speak directly about 2.1, but iTunes should give you an alert that you've already download the app. It shouldn't bill you again. It should still be on your computer.
    What do you mean "it has been downloaded (sp.) many times and has (sp.) never succeeded (sp.)"? What was it unsuccessful in doing?

Maybe you are looking for