If Apache goes down

What are the pre steps,post steps to look into the application system.
why it goes down all of the sudden when it is running fine.

Hi,
First thing you need to do is checking Apache log files for any reported errors under:
$IAS_ORACLE_HOME/Apache/Apache/logs
$IAS_ORACLE_HOME/Apache/Jserv/logs
$IAS_ORACLE_HOME/Apache/Jserv/logs/jvm
You may also review the database log file "alert_<SID>.log" file and see if any errors are logged there.
Was this working before? If yes, what changes have been done recently?
If no much details found in the log file, then enabling debug should be helpful.
Note: 249669.1 - How To Collect Apache and Jserv Debugging Details For Applications 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=249669.1
Regards,
Hussein

Similar Messages

  • Apache Tomcat goes down on starting Java application, Oracle error

    Hello all
    I am running a Java application on Apache Tomcat 5.5. I use Oracle 10g Express Edition as the back-end for my application. I deploy my application using theTomcat manager and it works fine.
    However, when I try to access the home page of the application, my Tomcat server goes down. The stdout logs of Apache Tomcat display the following message:
    Exception message: java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1
    ORA-12705: Cannot access NLS data files or invalid environment specified.
    What could the possible reasons be for this to happen? And how can I workaround or fix this?
    Thanks
    Swetha

    This looks like a problem that XE has with some recently altered locales, i.e. Russian. You can work around the problem by making sure that the Java locale (Locale.setDefault()) is supported by XE before the JDBC connect call. For example, use Locale.setDefault( Locale.US ). After connect, you may explicitly set session NLS parameters using ALTER SESSION. You can also restore the Java locale.
    -- Sergiusz

  • Planning server goes down when I try to delete a member in Planning Web

    Hi,
    Planning server goes down when I try to delete a member in Planning Web. I am using Hyperion Planning 4 with Tomcat 4.1.30 and Windows Server 2003.
    I am not sure whats happening. This is the exception log I am looking at:
    2009-07-24 18:19:22 ApplicationDispatcher[HyperionPlanning] Servlet.service() for servlet jsp threw exception
    javax.servlet.ServletException
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:684)
         at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:432)
         at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:356)
         at org.apache.catalina.valves.ErrorDispatcherValve.custom(ErrorDispatcherValve.java:420)
         at org.apache.catalina.valves.ErrorDispatcherValve.status(ErrorDispatcherValve.java:327)
         at org.apache.catalina.valves.ErrorDispatcherValve.throwable(ErrorDispatcherValve.java:277)
         at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:179)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:163)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:199)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:828)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:700)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:584)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:534)
    ----- Root Cause -----
    java.lang.OutOfMemoryError
    2009-07-24 18:19:22 ErrorDispatcherValve[localhost]: Exception Processing ErrorPage[errorCode=500, location=/Error.jsp]
    javax.servlet.ServletException
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:684)
         at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:432)
         at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:356)
         at org.apache.catalina.valves.ErrorDispatcherValve.custom(ErrorDispatcherValve.java:420)
         at org.apache.catalina.valves.ErrorDispatcherValve.status(ErrorDispatcherValve.java:327)
         at org.apache.catalina.valves.ErrorDispatcherValve.throwable(ErrorDispatcherValve.java:277)
         at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:179)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:163)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:199)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:828)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:700)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:584)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:534)
    ----- Root Cause -----
    java.lang.OutOfMemoryError
    Please do help me........ how to resolve this.
    Thanks.

    Hi,
    You could try increasing the java heap size, though sometimes an issue can occur if you are trying to delete a member when a workflow process has started, do you have one running?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Weblogic - 1g- Application servers are going down with lot of struck threds

    Hi All,
    We are seeing issue with one of the non prod server, as soon as we start the server we see lot struck threads in logs and server console is opening veryslowly after some time application server is going down. Please see the few logs in TD.
    [2012-07-10 06:14:08,063] [ICOG802944407]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <SAXOutputter> SAXOutputter.characters ['>']
    [2012-07-10 06:14:08,063] [ICOG802944407]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <SAXOutputter> SAXOutputter.characters ['666642']
    [2012-07-10 06:14:08,063] [ICOG802944407]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <SAXOutputter> SAXOutputter.characters ['<']
    [2012-07-10 06:14:08,063] [ICOG802944407]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <SAXOutputter> SAXOutputter.characters ['/lSO']
    'weblogic.kernel.Default (self-tuning)'> <JMSEventRouter> This message has been tried for first time
    [2012-07-10 06:14:07,878] [ICOG802937073]:VideoResponse:Warning [DEBUG] <[STUCK] ExecuteThread: '95' for queue: 'weblogic.kernel.Default (self-tuning)'> <NSStack> NSPop (32)
    [2012-07-10 06:14:07,877] [ICOG802944396]:DataResponse:Accepted [DEBUG] <[STUCK] ExecuteThread: '119' for queue: 'weblogic.kernel.Default (self-tuning)'> <SOAPPart> Setting current message form to: FORM_OPTIMIZED (currentMessage is now org.apache.axis.utils.ByteArray)
    [2012-07-10 06:14:07,877] [ICOG802944401]:FiosVoiceResponse:Accepted [DEBUG] <[ACTIVE] ExecuteThread: '103' for queue: 'weblogic.kernel.Default (self-tuning)'> <PropertyManager> timestamp calculation, currentTimeStamp : 2012-07-10 nextRefreshTime : 2012-07-10
    [2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <SSPBundleEventDAO> It's a Supp Cancle Order
    [2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <SSPBundleEventDAO> Only Bundle Cancel Exists..
    [2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <SSPBundleEventDAO> isFVBundleCancel true
    [2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <BusinessDelegate> Got Product with productTypeValue as NA
    [2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <BusinessDelegate> Got Product with productTypeValue as FDVBUNDLE
    [2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <BusinessDelegate> Got FiOSVoice Product.. Going to insert int Master table..
    [2012-07-10 06:14:08,077] [ICOG802941112-01]:FirmSaleOrder: [DEBUG] <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <BusinessDelegate> orderType Install
    We are using - Weblogic - 11g, Solaris - 5.10, jdk160_31_64
    Can some one please suggest
    Regards,
    Uday

    Hi,
    These are not an issue but you need couple of tuning on server side.
    Make sure to increase your Max permsize to 1024m in case of 64 bit or 512m in case of 32 bit.
    Try to increase chunk size and chunkpool size to 8k.
    Enable tunneling on your server.
    Make your min and max heap size as equal.
    try to changes these settings and still you see the issue let me know.
    Regards,
    Kal

  • Apache cluster down because of sharedaddress problem

    Hi,
    I had a problem in my 2-node + QS cluster that, the apache service resource going offline on both the nodes. I could find Probe timeout for the apache resource in /var/adm/messages. The sharedaddress resource is online on node 1 and offline on node 2. The cluster was online, and my apache resource was working properly, and all of the sudden this probelm arised and the apache resource went offline on both nodes
    Then I made the sharedaddress resource offline. After offlining, when I do the ifconfig -a i could see the shared ip address is shoing up on interface lo0:1 on both the nodes!!!!!!!!!!!!!!!!!!!
    I unplumberd the lo0:1 on both nodes, and made the shared address resource online. It shows online on clrg status on node 1, and ifconfig -a showd bge3:1 with the shared address on node 1 and nothing (no shared ip) on node 2.
    After I shutdown the cluster (cluster shutdown) and startup both nodes, it came up as normal. Apache is also online on both nodes !!!!!!!!!
    Any clue?

    Hi,
    If it was a non-existing problem, why were the appache resource offline on both nodes?. In a "CLUSETR", even if the apache resource is offline due to any reason, the resource must be running on the other node . !!! In my case , I was not able to access my web page !!! The whole cluster is down. There were no configuration change, nobody has even logged in to the servers. For sure there was something which made the apache resource down. It cant be with apache, cos both nodes cant have the same problem at the same time. Thats why I thought it might be a problem with the shared address...
    I couldn't even rectify the problem by restarting both the shared address resource group and the apache resource group. All what saved me was the total shutdown of the cluster and restart. !!!!!!
    Thanks
    Ushas Symon

  • OBIEE 11g environment going down.

    Hi Experts,
    Our OBIEE 11g Production environment goes down every now and then.
    I want to enable some scripts wherein i can get a notification on the pager or email that my obiee environment is down.
    So far we have no mechanism to know when is our environment down...
    Any pointers in this regard will be highly appreciated.
    Our servers are setup in Linux environment.
    Thanks
    Ashish

    Ashish,
    you have different 3rd party applications like sitescope, HP Open View etc. You might need to check with your company/alerts team who will setup these alerts for you.
    you can go through this to have a clear view of it. http://www.rittmanmead.com/2012/09/automated-monitoring-of-obiee-in-the-enterprise-an-overview/
    we use HP Openview and sitescope for these down alerts
    mark if it helps

  • HT201412 did a software update and now the only thing I get is the itunes logo and arrow pointing up and a lock symbol with a line going down toward the screen button.  Any suggestions to get this to open?

    Trying to get the ipad to open after doing a software update.  I only get the itunes logo with an arrow pointing toward it and a lock symbol with a line going down towards the screen button.  Any suggestions to get this to open?

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    http://support.apple.com/kb/ht4097

  • After upgrading to Mavericks, the free space on my SSD keeps going down for no apparent reason

    I downloaded Mavericks and installed it on my macbookpro ( with Crucial M4 SSD) and the free space on my ssd keeps going down for no reason. I reinstalled it from a bootable flashdrive, and the free space went from 20G to 60. Since then it keeps going down and I am now on 48G. I cannot find the source of the drain. Anyone else with the same problem?

    http://reviews.cnet.com/8301-13727_7-20025542-263.html
    I have not tested the solution suggested in the article linked above.
    But hope it helps.

  • My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine.  Any idea why this is happening/what I can do to fix it?

    My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine.  Any idea why this is happening/what I can do to fix it?

    I was having this problem while still using Mavericks -- it started after a Mavericks update last spring.  During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected.  Its gotten a little better, but still happens to at least one of my devices every day.  Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected.  It's just sloppy, poorly written software for technology that isn't working the way it should.  If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected.  With those turned off on all devices, TC stayed connected to everything for over a month.  The day I turned Continuity back on, all the problems started again.  It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.

  • WLSE doesn't seem to notice it when an Aironet device goes down

    WLSE type: 1105, version 2.7
    Aironet 1100 devices (267 pieces), IOS 12.2(13)JA4
    After the upgrade from version 2.6 to 2.7 we have a problem with the WLSE. Device discoveries and inventories run without a problem, but whenever a device goes down the WLSE doesn't seem to notice.
    With a sniffer we found the WLSE's polling the device, but there's no follow-up when there's no reply. As a result the device stays green.
    All configurations are the same with the exeption of one location. Here we've configured the WDS and this is the only location on which the WLSE reacts in the correct way.
    On several other locations there might be one or two devices on which the WLSE reacts correctly, but these are exeptions. We have compared configuration files, but can't find any differences between the devices.
    Whenever the WLSE does discover a failing device (with no WDS configured) it generates a P1 severity fault (default was P2).
    In case these devices have become reachable again the P1 severity fault is automatically acknowledged and remains this way. So far I haven't been able to clear these faults and therefor the device will keep it's alert status in the reportview.
    I do hope somebody has some idea about what's going on.
    After I encountered these problems after the upgrade I've started from scratch and used a clean installation of version 2.7. and a new discovery of our network.
    I really don't know what went wrong. Anybody with any suggestions is very welcome to vent them.
    Thanks for your help,
    Corine

    I'm having a similar issue. 500+ AP1200 units, IOS 15JA, newest WLSE version. Most of the time when a unit goes down, it will generate a SNMP unreachable fault message, and we are set to have the WLSE send an email in the event of a SNMP unreachable. That's great. Except once in awhile, it won't generate the fault. The device could be powered completely down for three or four days, and I'd never get a fault message. It's driving me nuts. All these AP's are configured the same using the exact same template, with only the IP info changed.

  • Domain Controller going down after IDM implemented

    Hi,
    We have implemented IDM 7.1 and are using the PSS (Password Self Service), Password Syncronization functionality for 2 AD and 6 ABAP systems. This PSS is implemented to support our company ESS which is on the internet so that users can reset their own password. Hence to support it we have a architecture having one AD on the DMZ and another internal.
    Both the AD repositories have been configured pointing to a perticular DC (Domain Contorller) . All the DC's have Phook installed on them.
    Since Go-live we have not had any issue with the DC on the DMZ but the internal DC keeps going down once in a while and it doesnt have a pattern. We tried switching to different DC's also which didnt work. Right now we are keeping a close watch on the DC and we carryout a restart whenever it happens.
    Did anyone come across such kind of a issue, if so then please let me know.
    Thanks.

    Hi Ahmed,
    Thank you for your quick response!  Our secondary domain controller IP settings were set properly according to the recommendation, but the primary (the one having the issues) was not. I went ahead and changed the settings and did an ipconfig /registerdns
    and restarted the netlogon service. Nothing changed after that. I ran a dcdiag and the only one that failed was this:
          Starting test: NCSecDesc
             Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
                Replicating Directory Changes In Filtered Set
             access rights for the naming context:
             DC=ForestDnsZones,DC=*hidden*,DC=*hidden*
             Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
                Replicating Directory Changes In Filtered Set
             access rights for the naming context:
             DC=DomainDnsZones,DC=*hidden*,DC=*hidden*
             ......................... *hidden PDC Name* failed test NCSecDesc
    I'm going to restart the server tonight after those IP changes and let you know my outcome.
    Thanks again!

  • What happens to client session when host goes down?

    I have a windows 2012 R2 RDP environment. 1 Broker and 3 Session Host Servers.
    My question is as follows:
    User connects via broker to one of the Host servers. Host server goes down, while user is still connected. Session is written in Broker database. User wants to connect again, but broker sends him on to the server which is down and so he cannot connect.
    Other situation is similar, User connects to host, administrator drains host, stopping new connections. User disconnects session, session is still in Broker, when user tries to reconnect is sent to drained server but cannot login, as he is considered new
    connection.
    What am I missing?
    Aaron

    Hi Aaron,
    Thank you for posting in Windows Server Forum.
    We need to configure RDSH in a load balance farm where it can be managed by RD Connection Broker. For that we need to use DNS RR where need to make entry for all RDSH server which will be handled by RDCB Server or we can use any load balancing method to load
    balance the different RDSH server and thus that connection will allow the disconnected session for reconnection and can identify the connection.
    The RD Connection Broker for RDS serves the following main purposes:
    • Determining the best RD Session Host server to connect to - this is based on the amount of current sessions per RD Session Host Server as a form of load balancing. 
    • Reconnecting a user to an existing session, in case there is one - this is called reconnecting to disconnected sessions. 
    • Being a resource for RD Web Access to deliver information about what Remote Apps are available on RD Session Host Servers that are a member of the broker.
    More information.
    Remote Desktop Server farms explained (Part 1
    & Part 2) (Link is for Server 2008 R2 but it’s only for reference).
    Step by Step Windows 2012 R2 Remote Desktop Services – Part 3 (For Server 2012 R2)
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Need to send a mail while safty stock goes down compare with actual stock

    Dear experts,
    I Need to send a mail to concern persion while stock goes down compare with safty stock. We plan to put a check at the point of MARD table updation, Because we not able to put a check at the all transaction codes, So please LET ME KNOW HOW TO PUT A CHECK AT STANDARD TABLE UPDATION?
    Thanks in adv,
    jayakumar.M

    Your best bet may to be place your check in the a user exit for goods movements.  The enhancement is MB_CF001, the component is EXIT_SAPLMBMB_001.
    Hope this helps,
    Mark

  • Need to send a mail while safty stock goes down

    Dear experts,
    I Need to send a mail to concern persion while stock goes down from safty stock. We plan to put a check at the point of MARD table updation, Because we not able to put a check at the all transaction codes, So please LET ME KNOW HOW TO PUT A CHECK AT STANDARD TABLE UPDATION?
    Thanks in adv,
    jayakumar.M

    Hi Jai,
    According to my understanding,
    As soon as the stock goes down from the safety stock a mail should be triggered.
    Probable solution (in my opinion)
    create a flag in the table set it whenever the stock value goes down.
    make calculations like (safety stock as today - safety stock previous date) = 0 if not set the flag and construct a workflow withe receiver settings based on the flag field and trigger a mail to the concerned person.
    This is just my idea.
    Try it and revert
    Thanks and Regards
    Srikanth.P

  • SSRS Reporting manages goes down frequently. ERROR: The underlying connection was closed: An unexpected error occurred on a send.

    We have been experiencing issues with SSRS over the past 5 weeks, the service goes down frequently. And it comes up only on reboot of the server.
    We had also disabled the On Access scan in Mcafee.
    The service is in use for about two years, and the below error started occuring over the last few days. Please advise on this.
    ui!ReportManager_0-2!24e8!08/14/2014-18:13:45:: e ERROR: The underlying connection was closed: An unexpected error occurred on a send.
    ui!ReportManager_0-2!24e8!08/14/2014-18:13:45:: e ERROR: HTTP status code --> 500
    -------Details--------
    System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> System.IO.IOException: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException:
    An existing connection was forcibly closed by the remote host
       at System.Net.Sockets.Socket.Send(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
       at System.Net.Sockets.NetworkStream.Write(Byte[] buffer, Int32 offset, Int32 size)
       --- End of inner exception stack trace ---
       at System.Net.Sockets.NetworkStream.Write(Byte[] buffer, Int32 offset, Int32 size)
       at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
       at System.Net.ConnectStream.WriteHeaders(Boolean async)
       --- End of inner exception stack trace ---
       at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
       at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
       at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
       at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
       at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
       at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
       at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Page.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    ui!ReportManager_0-2!24e8!08/14/2014-18:13:46:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
       at System.Threading.Thread.AbortInternal()
       at System.Threading.Thread.Abort(Object stateInfo)
       at System.Web.HttpResponse.End()
       at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
       at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at    at System.Threading.Thread.AbortInternal()
       at System.Threading.Thread.Abort(Object stateInfo)
       at System.Web.HttpResponse.End()
       at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
       at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
    library!ReportServer_0-1!1c90!08/14/2014-18:13:51:: Call to ListParentsAction(/Data Sources).
    library!ReportServer_0-1!1c90!08/14/2014-18:13:51:: Call to ListParentsAction(/Data Sources).
    library!ReportServer_0-1!1c90!08/14/2014-18:13:51:: Call to ListChildrenAction(/Data Sources, False).
    webserver!ReportServer_0-1!1c90!08/14/2014-18:13:51:: i INFO: Processed folder '/Data Sources'
    library!ReportServer_0-1!68c!08/14/2014-18:13:56:: Call to GetItemTypeAction(/).
    library!ReportServer_0-1!68c!08/14/2014-18:13:56:: Call to ListParentsAction(/).
    library!ReportServer_0-1!68c!08/14/2014-18:13:56:: Call to ListChildrenAction(/, False).
    webserver!ReportServer_0-1!68c!08/14/2014-18:13:56:: i INFO: Processed folder '/'

    Hi SThiyag,
    Based on your error message, it may be related to the “SecureConnectionLevel” in the RSReportServer.config file. Please go to C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer, use Notepad to open the RSReportServer.config,
    modify <Add Key="SecureConnectionLevel" Value="0"/>, change the value into "1" or "2".
    (Note: Please backup the file before modify it.)
    Acceptable values are: 
    3 Most secure—Use SSL for absolutely everything.
    2 Secure—Use SSL for rendering and methods that pass credentials but don't insist on it for all SOAP calls.
    1 Basic Security—Accepts http but rejects any calls that might be involved in the passing of credentials.
    0 Least Secure—Don't use SSL at all
    Here is a blog for error message "The underlying connection was closed...", please refer to the link below:
    http://blogs.msdn.com/b/engelsr/archive/2005/11/29/the-underlying-connection-was-closed.aspx
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

Maybe you are looking for

  • The hangless and crashless looping road to Force Quitting

    !http://farm5.static.flickr.com/4146/5084899876_602a0292dc.jpg! Well, it happened more than once. Looks like a programmers message meaning "investigate this please, before release!" You missed it guys, it did happen. And kept happening, even. Clickin

  • DB Tool List Table: How to access tables which are in different SQL database ?

    Hi, All, I'm working on a database application (SQL server) and is evaluating the NI DB Tool kit for this project. One of the requirement is that I need to access tables which are in two different database (say Table A in DB 1 and Table B in DB 2). O

  • Looking for the best hard drive digital camcorder!!

    I was in the store today and asked a couple sales reps, each giving me their opinions that personally didn't sound like "educated" opinions.  I want a hard drive camcorder with 60 GB and that is the "best" meeting that criteria.  Should I look at Can

  • Where is the Double-click Event in Adobe LiveCycle Designer

    Hi Experts: I was trying to put code into a Double Click event in Adobe LiveCycle Designer, but couldn't find the Event. There is a "Click" event, but that won't do. Am I missing something here? Thanks, Jen

  • Sales Order Progress Billing and Revenue Recognition

    I need some suggestions to take care of a progress billing and revenue recognition requirement. Billing and revenue recognition need to happen in parallel but on totally different schedules. Here's a sample scenario that I'd like to set up OM and AR