If background job fails how to rescheduled it?

Hi,
I want to know if background job fails how to rescheduled it and and how find out that it failed.
thanks.
sam.

Hi,
You need to schedule as earlier.
Thanks,
Sriram Ponna.

Similar Messages

  • Error in Control Framework: Background job failed

    Hi Experts,
    One background job failed with job log: Error in Control Framework in ECC 6.0 system; the job is supposed to produce a XML report. Can anyone please give some idea on this why it could happen? One SAP note 893534 has described same kind of issue but in CRM system. That note even cant be implemeneted in ECC 6.0. Any workaround? Is it a BASIS issue here?
    Thanks & Regards,
    SKB

    Hello,
    please check the variant. We had this problem, and when checking the variant I got a shortdump because the variant did not fit to the program (there were problems with subscreens in the selection screen). After adjusting the variant with program RSVARDOC_610 the variant was ok.
    I can not check if this solved the problem because the job runs weekly, and the next job is on Monday. But give it a try...
    HTH,
    Jens Hoetger

  • Background job failing

    Experts,
    We have background job running as part of the daily load. The user who created and scheduled the job, his account diabled recently and that makes job failing. I need to keep that job running but can not figure out how to change the user name in the job. For example, 0EMPLOYEE_CHANGE_RUN job based on event  'zemployee' triggers at the end of employee data load. Can you please provide any hint what should I do to change user name or take the ownership to keep this job running. Thanks.
    Regards,
    Nimesh

    Hello,
    Go to SM37--> put job name "0EMPLOYEE_CHANGE_RUN"  and user as "*" to get all users.
    Now select the job with released status>(Menu)Job>change->Steps-> select 1st row > change(pencil icon)>now you see the user name here.
    Change the user name to the user name used for all background job and save.
    Done.
    Happy Tony

  • Background job failing - ECC 6.0, Solution Manager 7.0

    Dear All,
    Four days back, I have installed the Solution Manager 7.0 and ECC 6.0 on
    HPUX IA64 hardware with database as Oracle 10.2.0.2.0 (Unicode).
    In both server, latest kernel patch has been applied.
    The Support package versions are (both server):
    KERNEL (Release 700)      146
    SAP_BASIS           0014
    SAP_ABA           0014
    PI_BASIS(2005_1_700)      0014
    ST-PI                0005
    SAP_BW                0016
    While checking the the jobs from SM37, in both the server,
    I am observing that following jobs are always failing with
    same reason:
    SAP_COLLECTOR_FOR_PERFMONITOR
    =============================
    Date       Time     Message text                                                           Message class Message no. Message type
    ========== ======== ====================================================================== ============= =========== ============
    15.05.2008 06:25:12 Job started                                                                 00           516          S
    15.05.2008 06:25:12 Step 001 started (program RSCOLL00, variant , user ID BGDUSER)              00           550          S
    15.05.2008 06:25:18 Clean_Plan:Cleanup of DB13 Plannings                                       DB6PM         000          S
    15.05.2008 06:25:18 Clean_Plan:started by RSDBPREV                       on server gcbeccd     DB6PM         000          S
    15.05.2008 06:25:18 Clean_Plan:Cleaning up jobs of system RD3                                  DB6PM         000          S
    15.05.2008 06:25:18 Clean_Plan:finished                                                        DB6PM         000          S
    15.05.2008 06:25:18 Database system not supported                                               S1           101          S
    15.05.2008 06:25:36 ABAP/4 processor: DBIF_DSQL2_SQL_ERROR                                      00           671          A
    15.05.2008 06:25:36 Job cancelled                                                               00           518          A
    SAP_REORG_UPDATERECORDS
    =======================
    Date       Time     Message text                                                          Message class Message no. Message type
    ========== ======== ===================================================================== ============= =========== ============
    14.05.2008 00:31:01 Job started                                                                00           516          S
    14.05.2008 00:31:01 Step 001 started (program RSM13002, variant SAP&001, user ID BGDUSER)      00           550          S
    14.05.2008 00:31:01 Reorganization of update date not allowed in batch                         15           100          A
    14.05.2008 00:31:02 Job cancelled                                                              00           518          A
    SAP_WP_CACHE_RELOAD_FULL
    ========================
    Date       Time     Message text                                                                                Message class Message no. Message type
    ========== ======== ============================================================================================ ============= =========== ============
    15.05.2008 00:30:11 Job started                                                                                00           516          S
    15.05.2008 00:30:11 Step 001 started (program RWP_RUNTIME_CACHE_RELOAD, variant SAP&RELOAD_ALL, user ID BGDUSER)      00           550          S
    15.05.2008 00:30:11 No component system chosen                                                                   URL_GEN_MSGS      031          E
    15.05.2008 00:30:11 Job cancelled after system exception ERROR_MESSAGE                                                00           564          A
    Please help to resolve this issue.
    Thanks in advance.
    Regards
    Sudip Ghosh

    Hi Markus,
    Thanks for the reply.
    Below is the dump:
    ======
    ======
    Runtime Errors         DBIF_DSQL2_SQL_ERROR
    Date and Time          15.05.2008 06:25:36
    Short text
    An SQL error occurred when executing Native SQL.
    What happened?
    The error 3113 occurred in the current database connection "DEFAULT".
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    How to correct the error
    Database error text........: "ORA-03113: end-of-file on communication channel"
    Database error code........: 3113
    Triggering SQL statement...: "FETCH NEXT "
    Internal call code.........: "[DBDS/NEW DSQL]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_DSQL2_SQL_ERROR" " "
    "RSORAVSH" or "RSORAVSH"
    "FILL_DBVSE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "gcbeccd"
    Network address...... "10.10.4.158"
    Operating system..... "HP-UX"
    Release.............. "B.11.23"
    Hardware type........ "ia64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 15
    Shortdump setting.... "full"
    Database server... "gcbeccd"
    Database type..... "ORACLE"
    Database name..... "RD3"
    Database user ID.. "SAPSR3"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Apr 5 2008 00:55:24"
    create on........ "HP-UX B.11.23 U ia64"
    Database version. "OCI_102 (10.2.0.1.0) "
    Patch level. 146
    Patch text.. " "
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "HP-UX B.11"
    Memory consumption
    Roll.... 1117216
    EM...... 0
    Heap.... 0
    Page.... 32768
    MM Used. 695792
    MM Free. 400816
    User and Transaction
    Client.............. 000
    User................ "BGDUSER"
    Language key........ "E"
    Transaction......... " "
    Transactions ID..... "482B8A4C89F0442BE10000000A0A049E"
    Program............. "RSORAVSH"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
    Information on where terminated
    Termination occurred in the ABAP program "RSORAVSH" - in "FILL_DBVSE".
    The main program was "RSORAVSH ".
    In the source code you have the termination point in line 48
    of the (Include) program "RSORAVSH".
    The program "RSORAVSH" was started as a background job.
    Job Name....... "SAP_COLLECTOR_FOR_PERFMONITOR"
    Job Initiator.. "BGDUSER"
    Job Number..... 05251100
    Source Code Extract
    Line
    SourceCde
    18
    INCLUDE STRUCTURE v_system_event_struc.
    19
    DATA:  END OF v_system_event_tab .
    20
    21
    check sy-dbsys(3) = 'ORA' .
    22
    23
    Get the new snapshots
    24
    25
    PERFORM fill_dbvse TABLES v_system_event_tab.
    26
    27
    28
    Get the old snapshots from database table MONI
    29
    30
    startday = sy-datum - days_to_keep .
    31
    32
    33
    Save new data now (otherwise these data will be selected twice)
    34
    35
    CONCATENATE 'SYSEVENT' sy-datum sy-uzeit INTO   monikey .
    36
    37
    EXPORT sy-datum
    38
    sy-uzeit
    39
    v_system_event_tab
    40
    TO DATABASE moni(db) ID monikey .
    41
    42
    *&      Form  FILL_DBVSE
    43
    44
    FORM fill_dbvse TABLES v_system_event_tab.
    45
    date =  sy-datum .
    46
    time =  sy-uzeit .
    47
    EXEC sql performing append_v_system_event .
    >>>>>
    select event,
    49
    total_waits,
    50
    total_timeouts,
    51
    time_waited * 10,
    52
    average_wait * 10
    53
    into :v_system_event_struc
    54
    from v$system_event
    55
    ENDEXEC .
    56
    ENDFORM.                               " FILL_DBVSE
    57
    58
    59
    *&      Form  APPEND_V_SYSTEM_EVENT
    60
    61
    FORM append_v_system_event.
    62
    v_system_event_tab-date  = date .
    63
    v_system_event_tab-time  = time .
    64
    65
    MOVE-CORRESPONDING v_system_event_struc TO v_system_event_tab.
    66
    APPEND v_system_event_tab .
    67
    ENDFORM.                               " APPEND_V_SYSTEM_EVENT
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    0
    SY-INDEX
    0
    SY-TABIX
    16
    SY-DBCNT
    0
    SY-FDPOS
    0
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    SY-UCOMM
    SY-TITLE
    Report for Collecting Data from V$SYSTEM_EVENT Hourly
    SY-MSGTY
    SY-MSGID
    SY-MSGNO
    000
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO
    0
    SY-DATUM
    20080515
    SY-UZEIT
    062520
    SY-XPROG
    RSDBRUNT
    SY-XFORM
    %_INIT_PBO_FIRST
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    2 FORM         RSORAVSH                            RSORAVSH                               48
    FILL_DBVSE
    1 EVENT        RSORAVSH                            RSORAVSH                               25
    START-OF-SELECTION
    Chosen variables
    Name
    Val.
    No.       2 Ty.          FORM
    Name  FILL_DBVSE
    SY-REPID
    RSORAVSH
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    5545455422222222222222222222222222222222
    23F2163800000000000000000000000000000000
    V_SYSTEM_EVENT_STRUC
    00000000000000000000000000000000000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000000000000000000000000000000000
    22222222222222222222222222222222222222222222222222222222222222220000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000C000C000C000C
    %_SPACE
    0
    0
    2
    0
    SY
    ###############################################################################T########  ####
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
    000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000400
    000001000000000000000000000000000000000F000000000000000000000000000000000000010500000005220000
    000000000000000000000000010001000000000E00000000000000000000000000000000000006040000000800000C
    No.       1 Ty.          EVENT
    Name  START-OF-SELECTION
    SY-LDBPG
    SAPDB__S
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    5454455522222222222222222222222222222222
    31042FF300000000000000000000000000000000
    %_DUMMY$$
    0000
    0000
    2222
    0000
    SY-DBSYS+0(6)
    ORA
    000
    000
    454
    F21
    SYST
    ###############################################################################T########  ####
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
    000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000400
    000001000000000000000000000000000000000F000000000000000000000000000000000000010500000005220000
    000000000000000000000000010001000000000E00000000000000000000000000000000000006040000000800000C
    V_SYSTEM_EVENT_TAB[]
    Table[initial]
    V_SYSTEM_EVENT_TAB
    00000000000000                                                                ################
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    3333333333333322222222222222222222222222222222222222222222222222222222222222220000000000000000
    000000000000000000000000000000000000000000000000000000000000000000000000000000000C000C000C000C
    SY-DATUM
    20080515
    00000000
    00000000
    33333333
    20080515
    DAYS_TO_KEEP
    30
    0001
    000E
    STARTDAY
    00000000
    00000000
    00000000
    33333333
    00000000
    MONIKEY
    0000000000000000000000
    0000000000000000000000
    2222222222222222222222
    0000000000000000000000
    SY-UZEIT
    062520
    000000
    000000
    333333
    062520
    SYST-REPID
    RSORAVSH
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    5545455422222222222222222222222222222222
    23F2163800000000000000000000000000000000
    MONI-CLUSTR
    0
    00
    00
    MONI
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    2222222222222222222222220022000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    Internal notes
    The termination was triggered in function "ExecuteCall"
    of the SAP kernel, in line 1190 of the module
    "//bas/700_REL/src/krn/runt/abexsql.c#2".
    The internal operation just processed is "DSQL".
    Internal mode was started at 20080515062520.
    Internal call code.........: "[DBDS/NEW DSQL]"
    Active Calls in SAP Kernel
    Lines of C Stack in Kernel (Structure Differs on Each Platform)
    (0)  0x4000000003b2b450  CTrcStack + 0x1b0 at dptstack.c:227 [dw.sapRD3_DVEBMGS00]
    (1)  0x4000000004d2c470  Z16rabaxCStackSavev + 0x1d0 [dw.sapRD3_DVEBMGS00]
    (2)  0x4000000004d32160  ab_rabax + 0x3570 [dw.sapRD3_DVEBMGS00]
    (3)  0x40000000047b51e0  Z10abdbdserriPKtiS0_P9DS_HEADERS0_iPv + 0x470 [dw.sapRD3_DVEBMGS00]
    (4)  0x4000000003d777f0  Z11ExecuteCallv + 0x11f0 [dw.sapRD3DVEBMGS00]
    (5)  0x4000000003d7e7b0  Z8abjdsqlv + 0x1b0 [dw.sapRD3_DVEBMGS00]
    (6)  0x400000000402f190  Z8abextriv + 0x440 [dw.sapRD3_DVEBMGS00]
    (7)  0x4000000003f53bc0  Z9abxeventPKt + 0x3c0 at abrunt1.c:339 [dw.sapRD3_DVEBMGS00]
    (8)  0x4000000003d9f210  Z8abtriggv + 0x110 at abrunt1.c:58 [dw.sapRD3_DVEBMGS00]
    (9)  0x4000000003d9ebe0  ab_run + 0xc0 [dw.sapRD3_DVEBMGS00]
    (10) 0x4000000001caa820  N_ab_run + 0x20 at dymainstp.c:4739 [dw.sapRD3_DVEBMGS00]
    (11) 0x4000000001cb40f0  dynpmcal + 0x3f0 at dymainstp.c:2281 [dw.sapRD3_DVEBMGS00]
    (12) 0x4000000001caf260  dynppai0 + 0xcb0 at dymainstp.c:1107 [dw.sapRD3_DVEBMGS00]
    (13) 0x4000000001cb1ec0  dynprctl + 0x340 at dymainstp.c:358 [dw.sapRD3_DVEBMGS00]
    (14) 0x4000000001c9dff0  dynpen00 + 0xac0 at dymain.c:1628 [dw.sapRD3_DVEBMGS00]
    (15) 0x4000000001fea460  Thdynpen00 + 0x510 at thxxhead.c:4830 [dw.sapRD3_DVEBMGS00]
    (16) 0x4000000001fb54e0  TskhLoop + 0x5520 at thxxhead.c:3945 [dw.sapRD3_DVEBMGS00]
    (17) 0x4000000001faae40  ThStart + 0x460 at thxxhead.c:1164 [dw.sapRD3_DVEBMGS00]
    (18) 0x4000000001569ec0  DpMain + 0x5f0 at dpxxdisp.c:1088 [dw.sapRD3_DVEBMGS00]
    (19) 0x4000000002c10630  nlsui_main + 0x30 [dw.sapRD3_DVEBMGS00]
    (20) 0x4000000002c105c0  main + 0x60 [dw.sapRD3_DVEBMGS00]
    (21) 0xc00000000002be30  main_opd_entry + 0x50 [/usr/lib/hpux64/dld.so]
    List of ABAP programs affected
    Index
    Typ
    Program
    Group
    Date
    Time
    Size
    Lang.
    0
    Prg
    RSORAVSH
    0
    30.03.2005
    10:21:59
    19456
    E
    1
    Prg
    SAPMSSY0
    1
    17.12.2007
    15:41:05
    92160
    E
    2
    Prg
    SAPMSSYD
    1
    12.09.2006
    11:33:31
    21504
    E
    3
    Prg
    SAPFSYSCALLS
    1
    09.09.2004
    14:18:32
    8192
    E
    4
    Prg
    RSDBRUNT
    0
    17.12.2007
    16:04:40
    254976
    E
    5
    Typ
    RSSCR
    0
    30.03.2005
    10:21:45
    5120
    6
    Prg
    RSDBSPBL
    0
    30.03.2005
    10:21:58
    72704
    E
    7
    Prg
    SAPDB__S
    0
    30.03.2005
    10:22:01
    19456
    E
    8
    Prg
    RSDBSPMC
    0
    12.09.2006
    11:25:01
    79872
    E
    9
    Typ
    DDSHDESCR
    0
    03.09.1997
    03:05:16
    4096
    10
    Typ
    SPPARAMS
    0
    07.05.1997
    13:10:38
    2048
    11
    Prg
    SAPLSABE
    11
    09.09.2004
    14:18:36
    13312
    E
    12
    Prg
    SAPLSECU
    12
    17.12.2007
    15:31:45
    87040
    E
    13
    Typ
    RSSUBINFO
    0
    14.10.1999
    22:01:03
    3072
    14
    Prg
    SAPLSTUP
    14
    17.12.2007
    15:29:58
    74752
    E
    15
    Prg
    SAPLCNDP
    15
    11.09.2007
    15:24:45
    195584
    E
    16
    Prg
    SAPLSCNT
    16
    18.02.2005
    14:16:06
    30720
    E
    17
    Prg
    SAPSHDTV
    16
    05.01.2005
    16:26:16
    33792
    E
    18
    Prg
    SAPFGUICNTL
    1
    18.02.2005
    14:15:08
    24576
    E
    19
    Prg
    SAPLOLEA
    19
    11.09.2007
    11:17:30
    96256
    E
    20
    Prg
    SAPLSGUI
    20
    17.12.2007
    15:41:05
    84992
    E
    21
    Prg
    SAPLSTTM
    21
    05.07.2005
    13:10:18
    69632
    E
    22
    Prg
    SAPLSBDC
    22
    17.12.2007
    15:30:54
    44032
    E
    23
    Prg
    SAPLSFES
    23
    17.12.2007
    16:04:40
    260096
    E
    24
    Prg
    SAPLTHFB
    24
    17.12.2007
    15:41:05
    394240
    E
    25
    Typ
    WPINFO
    0
    26.02.1999
    14:49:01
    6144
    26
    Prg
    SAPLURFC
    26
    17.12.2007
    15:37:35
    22528
    E
    27
    Prg
    SAPLSPLUGIN
    27
    09.09.2004
    14:18:36
    8192
    E
    28
    Typ
    SWCBCONT
    0
    15.11.2000
    17:55:11
    3072
    29
    Typ
    OLE_VERBS
    0
    04.04.1995
    16:02:20
    2048
    30
    Typ
    OLE_PA
    0
    04.04.1995
    16:02:19
    2048
    31
    Typ
    SYST
    0
    09.09.2004
    14:18:12
    31744
    32
    Typ
    MONI
    0
    31.03.2004
    16:41:21
    5120
    Directory of Application Tables
    Name                                     Date       Time       Lngth
    Val.
    Program  RSORAVSH
    SYST                                     09.09.2004 14:18:12   00004612
    \0\0\0\0\0\x0010\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0
    MONI                                       .  .       :  :     00002944
    \0\0  \0\0\0\0\0\0\0\0\0\0\0\0\0\0
    ABAP Control Blocks (CONT)
    Index
    Name
    Fl
    PAR0
    PAR1
    PAR2
    PAR3
    PAR4
    PAR5
    PAR6
    Source Code
    Line
    71
    PAR2
    03
    0000
    0014
    002B
    RSORAVSH
    37
    73
    PAR2
    03
    0000
    0015
    002D
    RSORAVSH
    37
    75
    PAR2
    03
    0000
    0016
    0026
    RSORAVSH
    37
    77
    00
    0000
    RSORAVSH
    37
    78
    PERP
    00
    0002
    RSORAVSH
    44
    79
    PERP
    1C
    0000
    RSORAVSH
    44
    80
    PERP
    04
    0000
    RSORAVSH
    44
    81
    mvqk
    10
    0005
    0044
    04EC
    RSORAVSH
    45
    83
    mvqk
    0C
    0005
    0054
    052E
    RSORAVSH
    46
    85
    DSQL
    00
    0017
    RSORAVSH
    48
    86
    DSQL
    01
    0018
    RSORAVSH
    48
    87
    DSQL
    04
    0025
    RSORAVSH
    48
    >>>>>
    DSQL
    16
    0025
    RSORAVSH
    48
    89
    BRAN
    05
    0004
    RSORAVSH
    48
    90
    perf
    00
    000A
    RSORAVSH
    48
    91
    PERP
    80
    0000
    RSORAVSH
    48
    92
    BRAX
    00
    FFFC
    RSORAVSH
    48
    93
    DSQL
    23
    0000
    RSORAVSH
    48
    94
    ENDF
    00
    0000
    RSORAVSH
    56
    95
    00
    0000
    RSORAVSH
    56
    ===========
    ===========
    Please check and advise.
    Also, I am trying to search for the note 6083 in market place, but not getting the same.
    Please advise.
    Thanks & Regards
    Sudip

  • Background job failing with license check error

    Hi Experts
    In our ERP 6.0 system ,all the background jobs are failing with license check error.
    Have checked the license in SLICENSE and the license is fine.
    There is no warning while users are loggign in ,but when any background job is runing its failing with error
    Job started
    Logon not possible (error in license check)
    Job cancelled after system exception ERROR_MESSAGE
    Also performed the license test which is failing
    F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
    \XX1_DVEBMGS00_host_xx
    Protocol saplicense test:
    Read sapsytem name
           ok, sapsytem name = XX1
    Read message server host
           ok, host = hostname
    Read message server service port
           ok, service port = sapmsXX1
    Connect to message server
           ok, connect done
    Read hardware key from message server
           ok, got hardware key
    Detach from message server
           ok, detached
    Check hardware key
           ok, hardware key = T0343073854
    Connect to database
           ok, connected
    Check license
           ok, check done
    Disconnect database
           ok, database disconnected
    test result: license test failed
    LICENSE system: XX1 hardware key: T0343073854 expiration_date:
            installation no:  key:
            userlimit: 0 productid: R3_BASIS
            system-nr:
    license expired ***
    Please suggest how to troubleshoot.
    Regards
    Ajay

    @Michael
    In SLICENSe the Hardware key field is not BLUE or BLACK and its showing the exact hardware key which i can see at OS level with saplicense -get command.
    @Jagadish
    Note is good refrence, i reiinstalled the Digitally signed license with saplikey command and it was successful.
    But still the license test is failing at OS Level..below is the command prompt output.
    ===================================================================
    F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplikey -install C:\license_script_XX.txt pf
    =F:\usr\sap\XX\SYS\profile\XX_DVEBMGS00_mngsez148079
    SAP License Key Administration  -  Copyright (C) 2003 SAP AG
    2 SAP license key(s) successfully installed.
    F:\usr\sap\XX\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
    \MD1_DVEBMGS00_mngsez148079
    Protocol saplicense test:
    Read sapsytem name
           ok, sapsytem name = XX1
    Read message server host
           ok, host = host
    Read message server service port
           ok, service port = sapmsXX1
    Connect to message server
           ok, connect done
    Read hardware key from message server
           ok, got hardware key
    Detach from message server
           ok, detached
    Check hardware key
           ok, hardware key = T0343073854
    Connect to database
           ok, connected
    Check license
           ok, check done
    Disconnect database
           ok, database disconnected
    test result: license test failed
    LICENSE system: XX1 hardware key: T0343073854 expiration_date:
            installation no:  key:
            userlimit: 0 productid: R3_BASIS
            system-nr:
    license expired ***
    ============================================================
    @Juan
    The hardware key was changed and we requested a new license with new hardware key,system was runing fine for couple of weeks with all background jiobs for SPAM./SAINT Ok .We performed EHP4 on this system.
    But now this issue is here,so i guess we should troubleshoot.
    Please let me know any other pointers.
    Regards
    Ajay
    PS In SLICENSE new installed license is fine and all users can login.

  • Scheduled TMS_ # TMS_TP_IMPORT  background jobs fail with error code 0232

    Is anyone else having the problem we've just encountered since upgrading to ECC 6.0 and CRM 2007, where once setting up the automatic import ALL background jobs, to have all of the Transport Change Requests imported into the Q-Prod testing systems automatically, fail after several successful runs?
    After setting up the automatic import background job to run every 15 minutes, the first few run successfully (importing any transports as it should), then the transports stop being imported.
    The background jobs continue to run, but have the following in the job log overviews CRM 2007 - "Could not start transport control program tp". R\3 ECC 6.0 - "Transport control program tp ended with error code 0232".
    Only by deleting the background job and recreating it (or manually importing) from STMS, can the transports continue to be imported. Although I have noticed that there are multiple tp.exe processes started, which need to be deleted before the STMS and TMS Background jobs work again.
    The:
       DB is SQL Server 2005
       disp+work is at version 7000.150.14.48855
       R3Trans is at version 7000.149.14.47907
       tp is at version 7000.144.14.39594
    Any suggestions on how to cure this for good?

    Thanks All
    FYI
    SAP first suggested the following notes: 19466, 1150361, and to add a Startup profile parameter rfc/use_gwstart = 1. Which was only partially successful.
    I guess it had more to do with RFC processes hanging than it did with the tp, which was fixed in a later kernel patch level.
    I've upgraded the kernel to the latest (70000.181.0.0) and my problem was fixed.
    Ken

  • Background job fails for BDC profile creation and role assignment

    Hi Experts,
    I have created a BDC Function module for Tcode 'PFCG' for profile creation and role assignment, and called this FM in my zprogram. the problem is that when i run this program in foreground it executes succesfully, but if i schedule it in background it fails throwing error in job log 'Role 'Z...' does not contain any active authorizations'. But i have created one more program to create authorization objects which runs before this zprogram.I have also checked the authorization object in 'RSECADMIN', it reflects active. I dont understand whats happening exactly when it runs background.
    Below is the process of job
       1. ZMIS_AUTH_OBJECT_CREATE
           Variant : auth-create
       2. ZMIS_AUTH_ASSIGN_TO_ROLE
           Variant : auth-assign
    The problem is in second program, runs in foreground but fails in background.
    Code which i have written in my second program
    ***BDC for Profile creation and assignment to Roles
        CALL FUNCTION 'ZROLE'
          EXPORTING
           ctu                     = 'X'
           mode                    = p_mode
           UPDATE                  = 'L'
    *   GROUP                   =
    *   USER                    =
    *   KEEP                    =
    *   HOLDDATE                =
           nodata                  = '/'
            agr_name_neu_001        = wa_role-role_name
            text_002                = wa_role-desc
            text_003                = wa_role-desc
            text_004                = wa_role-desc
           value_01_005            = 'T-ML330881'
            h_fval_low_01_006       = wa_role-auth
            profn_007               = lv_profile
            ptext_008               = lv_text1
    * IMPORTING
    *   SUBRC                   =
         TABLES
           messtab                 = temp_message.
    ***Generation of Profile created
    CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
         EXPORTING
           activity_group                      = wa_role-role_name
    *     PROFILE_NAME                        =
    *     PROFILE_TEXT                        =
          no_dialog                           = ' '
          rebuild_auth_data                   = ''
          org_levels_with_star                = ' '
          fill_empty_fields_with_star         = 'X'
          template                            = ' '
          check_profgen_tables                = 'X'
          generate_profile                    = 'X'
          authority_check_pfcg                = 'X'
       EXCEPTIONS
         activity_group_does_not_exist       = 1
         activity_group_enqueued             = 2
         profile_name_exists                 = 3
         profile_not_in_namespace            = 4
         no_auth_for_prof_creation           = 5
         no_auth_for_role_change             = 6
         no_auth_for_auth_maint              = 7
         no_auth_for_gen                     = 8
         no_auths                            = 9
         open_auths                          = 10
         too_many_auths                      = 11
         profgen_tables_not_updated          = 12
         error_when_generating_profile       = 13
         OTHERS                              = 14  .
    Experts please help me out its very urgent. your help is appreciated and rewarded. Thanking you in advance.
    Regards,
    Chetan

    Hi Praveen,
    Yeah definately, my requirement is that I have to access of some BI reports to certain users, so contract data will be downlaoded from ECC on application server, need to read that file from application server and for the each contract i ahould create a authorization object, role creation and assigning of role to the user and profile generation and activation.
    To achieve this i have written two programs
    1) ZMIS_AUTH_OBJECT_CREATE- This program will create the Authorization Object using BDC and Role creation Using the BAPI
    "" Creation of Authorization Object
    CALL FUNCTION 'ZAUTHOBJ'
            EXPORTING
             ctu                    = 'X'
             mode                   = p_mode
             UPDATE                 = 'L'
    *   GROUP                  =
    *   USER                   =
    *   KEEP                   =
    *   HOLDDATE               =
             nodata                 = '/'
             g_authname_001         = 'ZDUMMY_MIS'
              g_targetauth_002       = wa_tab-auth
              g_authtxt_003          = wa_tab-short_desc
              g_authtxtmd_004        = wa_tab-med_desc
             marked_04_005          = 'X'
              g_authtxt_006          = wa_tab-short_desc
              g_authtxtmd_007        = wa_tab-med_desc
             tctiobjnm_04_008       = 'ZBUS_UNIT'
              g_authtxt_009          = wa_tab-short_desc
              g_authtxtmd_010        = wa_tab-med_desc
             marked_05_011          = ''
             opt_01_012             = 'EQ'
              low_01_013             = wa_tab-bu
              g_authtxt_014          = wa_tab-short_desc
              g_authtxtmd_015        = wa_tab-med_desc
             marked_04_016          = 'X'
              g_authtxt_017          = wa_tab-short_desc
              g_authtxtmd_018        = wa_tab-med_desc
             tctiobjnm_04_019       = 'ZCONTRCT'
              g_authtxt_020          = wa_tab-short_desc
              g_authtxtmd_021        = wa_tab-med_desc
             marked_05_022          = ''
             opt_01_023             = 'EQ'
              low_01_024             = lv_contract
              g_authtxt_025          = wa_tab-short_desc
              g_authtxtmd_026        = wa_tab-med_desc
              g_authtxt_027          = wa_tab-short_desc
              g_authtxtmd_028        = wa_tab-med_desc
              g_authname_029         = wa_tab-auth
    * IMPORTING
    *   SUBRC                  =
           TABLES
             messtab                = temp_message.
    "" Creation of role
    LOOP AT it_role INTO wa_role.
          CLEAR wa_text.
          wa_text-text = wa_role-desc.
          wa_text-langu = 'E'.
          APPEND wa_text TO it_text.
          wa_jobrole-agr_name = wa_role-role_name.
          wa_parentrole-agr_name = 'ZM_CT_DUMMY_MIS'.
          wa_method-usmethod = 'CHANGE'.
          CALL FUNCTION 'ZBAPI_JOBROLE_CLONE'
            EXPORTING
              jobrole          = wa_jobrole
             parent           = wa_parentrole
             method           = wa_method
           TABLES
    *   RETURN           =
             shorttext     = it_text
    *   LONGTEXT         =
    *   MENU_NODES       =
    *   MENU_TEXTS       =.
        ENDLOOP.
    2) ZMIS_AUTH_ASSIGN_TO_ROLE - This program will generate the profile created assign it to the role.
      ""*BDC for Profile creation and assignment to Roles
        CALL FUNCTION 'ZROLE'
          EXPORTING
           ctu                     = 'X'
           mode                    = p_mode
           UPDATE                  = 'L'
    *   GROUP                   =
    *   USER                    =
    *   KEEP                    =
    *   HOLDDATE                =
           nodata                  = '/'
            agr_name_neu_001        = wa_role-role_name
            text_002                = wa_role-desc
            text_003                = wa_role-desc
            text_004                = wa_role-desc
           value_01_005            = 'T-ML330881'
            h_fval_low_01_006       = wa_role-auth
            profn_007               = lv_profile
            ptext_008               = lv_text1
    * IMPORTING
    *   SUBRC                   =
         TABLES
           messtab                 = temp_message .
       COMMIT WORK AND WAIT.
    ""*Generation of Profile created
      LOOP AT it_role INTO wa_role.
        CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
         EXPORTING
           activity_group                      = wa_role-role_name
    *     PROFILE_NAME                        =
    *     PROFILE_TEXT                        =
          no_dialog                           = ' '
          rebuild_auth_data                   = ''
          org_levels_with_star                = ' '
          fill_empty_fields_with_star         = 'X'
          template                            = ' '
          check_profgen_tables                = 'X'
          generate_profile                    = 'X'
          authority_check_pfcg                = 'X'
       EXCEPTIONS
         activity_group_does_not_exist       = 1
         activity_group_enqueued             = 2
         profile_name_exists                 = 3
         profile_not_in_namespace            = 4
         no_auth_for_prof_creation           = 5
         no_auth_for_role_change             = 6
         no_auth_for_auth_maint              = 7
         no_auth_for_gen                     = 8
         no_auths                            = 9
         open_auths                          = 10
         too_many_auths                      = 11
         profgen_tables_not_updated          = 12
         error_when_generating_profile       = 13
         OTHERS                              = 14
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDLOOP.
    For creating authorization objects, role & profile i have created one dummy auth, dummy role & dummy profile respectively.
    i have created dummy objects to copy the roles from dummy object and assign the same to new Auth obj, role & profile.
    Let me know what needs to be done. because these both the programs run perfectly in foreground, but fails in background.
    Regards,
    Chetan

  • CCLM Background jobs failed

    Dear colleagues,
    I have some background jods failed:
    SM_CCL:OBJ_<SID>_<Installation_Number>
    19.05.2014 10:05:57 Job started
    19.05.2014 10:05:57 Step 001 started (program RAGS_CC_GET_OBJECTS, variant &0000000000000, user ID SOLMAN_BTC)
    19.05.2014 10:05:59 Selected System: <SID>_<Installation_Number>
    19.05.2014 10:05:59 Variant
    19.05.2014 10:06:01 Solution: Local SAP Solution
    19.05.2014 10:06:42 No objects found.
    19.05.2014 10:06:42 Failed with sy-subrc: 2
    19.05.2014 10:06:42 Job cancelled after system exception ERROR_MESSAGE
    and
    SM_CCL:LUSG_<SID>_<Installation_Number>
    18.05.2014 13:47:30 Job started
    18.05.2014 13:47:31 Step 001 started (program RAGS_CC_GET_LAST_USAGE, variant &0000000000000, user ID SOLMAN_BTC)
    18.05.2014 13:47:33 Variant
    18.05.2014 13:47:35 CCLM Landscape not set up properly. Read long text for further details
    18.05.2014 13:47:35 CC Objects: 0
    18.05.2014 13:47:35 Last Usage Data has never been retrieved before
    18.05.2014 13:47:35 Merge data from AGS_CC_USAGE
    18.05.2014 13:47:35 Solution: Local SAP Solution
    18.05.2014 13:47:35 Regarding time range: 17.05.2014 - 17.05.2014
    18.05.2014 13:47:58 No usage data found
    18.05.2014 13:47:58 Failed with sy-subrc: 2
    18.05.2014 13:47:58 Job cancelled after system exception ERROR_MESSAGE
    Could you please help me to resolve it?
    Thanks a lot,
    Alexander

    We have a similar Issue SM_CCL:QUAL_XXX_0020275865 was aborted  and SAP has suggested the below
    The Quality collector job is failing because ATC is not properly configured for the Managed system.
    According to SE16 table e2e_efwk_log, there is no ATC data being extracted from the managed system.
    I also attempted to run the remote function call SATC_CI_GET_RESULT_CATALOG, and it failed to produce records.
    I've attached a  link which outlines the method of ensuring ATC is properly configured. (ATC_config).
    Once ATC has been properly configured, the QUALITY job should run to completion.
    please refer to the below link for setup details
    Getting Started with the ABAP Test Cockpit for QMs and Admins

  • Background jobs failing with ABAP/4 processor: RFC_CONVERSION_FIELD

    Hi Guru's,
    Below are the backgroud jobs failing with runtime Error " ABAP/4 processor: RFC_CONVERSION_FIELD" in  solution manager system (solution manager 3.0,SR2). Not sure why all these jobs failing with this dump on of sudden. i haven't made any changes to the system in the recent past.
    BTC_CMS_COLLECTOR
    SAP_APPLICATION_STAT_COLLECTOR
    SESS_Y000001806_COLL_TRANS
    ABAp Dump says that
    Conversion error between two character sets
    What happened?
    Conversion error "ab_rfccon" from character set 4103 to character set 1100.
    When executing a remote function call a conversion error occurred. This
    occurred when receiving or sending the data. The conversion error can
    only appear, when the data is transferred from a Unicode system to a
    non-Unicode system.
    Could some one please share some information if any one experienced the issue. Please note that all of our ECC systems are uni-code systems.
    Thanks & Regards,
    Vinod.

    Hi Vinod
    Just try to understand the purpose of these jobs and may be these Notes will help you
    Note 814707 - Troubleshooting for RFC connections Unicode/non-Unicode
    Note 647495 - RFC for Unicode ./. non-Unicode Connections
    Note 1361970 - Conversion problems during RFC communication

  • DB13 Jobs Failing - How do I trouble shoot?

    Here is an example of a failed job. Any advice on how to get it to work in DB13?
    DB13 - Check Databasee
    Status - Scheduling Failed.
    2008-08-28 01:00:59 Step 001 started (program RSDBAJOB, variant &0000000000087, user ID WFEE)
    2008-08-28 01:00:59 Action deleted in SDBAP at 20080828005959
    2008-08-28 01:00:59 Job cancelled after system exception ERROR_MESSAGE
    2008-08-28 01:00:59 Job started
    2008-08-28 01:00:59 Step 001 started (program RSDBAJOB, variant &0000000000121, user ID DDIC)
    2008-08-28 01:00:59 Execute logical command BRCONNECT On host spr3db1
    2008-08-28 01:00:59 Parameters: -u / -jid CHECK20080828010000 -c -f check
    2008-08-28 01:01:20 SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: x_error
    2008-08-28 01:01:20 Job cancelled after system exception ERROR_MESSAGE

    Please check if the brconnect program is at the given place.
    Also have a look at note 1229617 - Error handling for external commands
    Markus

  • Dumps generting due to background job failing

    Hi Experts,
    The following backround job getting failed frequently caused dumps generation,
    Background running with the below program,
    Dump::
    Can you please some one help me on this issue.
    Rgds,
    Venkat

    Hi All,
    Thanks for your valuable suggestions.
    We are investigating the issue with PI team meanwhile job has disabled.
    Will update you once it resolved.
    Thanks & Regards,
    Venkat

  • Background job - failing when file not on app server

    Hi Experts,
    I am facing an issue, while I am trying to run a program in background.
    Let me explain u the situation.
    My program runs in background and pick one file from predifined folder from application server and process that file. if file is not in the folder batch job goes into cancel status. but what i want if proposed file is not available then batch job will run and finished; it should not go into cancle status.
    waiting for valuable inputs,
    Prarthan.
    Edited by: Julius Bussche on Feb 20, 2009 1:06 PM
    Please use meaningfull subject titles

    hi
    below is my piece of code for application server.
    thanks.
    FORM application_server .
      TYPE-POOLS: kcde.
      DATA : lt_intern TYPE  kcde_cells OCCURS 0 WITH HEADER LINE.
      DATA wa_src01 TYPE string.
      DATA: BEGIN OF wa_src0,
           material         LIKE bapi2017_gm_item_create-material,
           consumption_qty(13) TYPE c,"  like bapi2017_gm_item_create-entry_qnt,
           base_uom         LIKE bapi2017_gm_item_create-entry_uom_iso,
           movement_type    LIKE bapi2017_gm_item_create-move_type,
           cost_center      LIKE bapi2017_gm_item_create-costcenter,
           doc_date         LIKE bapi2017_gm_head_01-doc_date,
           post_date        LIKE bapi2017_gm_head_01-pstng_date,
           plant            LIKE bapi2017_gm_item_create-plant,
           storage_location LIKE bapi2017_gm_item_create-stge_loc,
           END OF wa_src0.
      DATA : lt_src0 LIKE TABLE OF wa_src0.
      DATA : file1 TYPE string.
      DATA : tmp0(20). " type string.
      DATA : intern1 TYPE  kcde_intern.
      DATA : tmp_date LIKE sy-datum.
      path1 = path.
      replace '.txt' in PATH1 with ''.
      IF path IS INITIAL.
        path = '/usr/local/interface/globalone/SFA/SFA_WORK/SFA_'.
        tmp_date0(2) = sy-datum6(2). "date dd
        tmp_date2(2) = sy-datum4(2). "month mm
        tmp_date4(4) = sy-datum0(4). "year yyyy
        CONCATENATE path plant tmp_date '.txt' INTO path.
       concatenate path  tmp_date  into path1.
      ENDIF.
      file1 = path.
      file_nm = path.
    FILE_NM2 = PATH1.
      OPEN DATASET file_nm FOR INPUT IN TEXT MODE ENCODING NON-UNICODE.
      IF sy-subrc NE 0.
       MESSAGE e000(zmm002).
       EXIT.
      ELSE.
        DO.
          READ DATASET file_nm INTO wa_src01.
          IF sy-subrc = 0.
             CLEAR wa_src0.
            REPLACE cl_abap_char_utilities=>cr_lf(1) IN wa_src01 WITH ''.
            SPLIT wa_src01 AT cl_abap_char_utilities=>horizontal_tab
                                INTO  wa_src0-material
                                      tmp0
                                      wa_src0-base_uom
                                      wa_src0-movement_type
                                      wa_src0-cost_center
                                      wa_src0-doc_date
                                      wa_src0-post_date
                                      wa_src0-plant
                                      wa_src0-storage_location.
            SHIFT tmp0 LEFT DELETING LEADING '0'.
            wa_src0-consumption_qty = tmp0.
            APPEND  wa_src0 TO lt_src0.
          ELSE.
            EXIT.
          ENDIF.
        ENDDO.
        CLEAR wa_src0.
        LOOP AT lt_src0 INTO wa_src0.
          REPLACE ',' IN wa_src0-consumption_qty WITH '.'.
          MOVE:  wa_src0-material         TO wa_srcdata-material,
                 wa_src0-consumption_qty  TO wa_srcdata-consumption_qty,
                 wa_src0-base_uom         TO wa_srcdata-base_uom,
                 wa_src0-movement_type    TO wa_srcdata-movement_type,
                 wa_src0-cost_center      TO wa_srcdata-cost_center,
                 wa_src0-doc_date         TO wa_srcdata-doc_date,
                 wa_src0-post_date        TO wa_srcdata-post_date,
                 wa_src0-plant            TO wa_srcdata-plant,
                 wa_src0-storage_location TO wa_srcdata-storage_location.
          APPEND wa_srcdata TO gt_srcdata.
          CLEAR wa_srcdata.
          CLEAR wa_src0.
        ENDLOOP.
      ENDIF.
      DELETE DATASET file_nm.
    ENDFORM.                    " application_server

  • If a GC-Job fails: how to inform developer or othery by e-mail?

    Hi,
    I have a simple GC-job which refreshes a materialized view. If that job struggles or fails for whatever reason I as an GC-administrator will get an e-mail.
    Now I have the case that a non GC-administrator (e.g. developer) wants to get that e-mail, too.
    Seems to me that it's rather difficult to set up such a mechanism. Does anybody now what exactly needs to be done to send non GC-administrators an e-mail
    if a job has failed?
    Any help will be appreciated...
    Rgds
    JH

    I think this should set you up:
    http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b31949/job_system.htm
    "Job Notifications
    The Grid Control Notification system allows you to define a notification rule to send e-mail to the job owner when a job enters a chosen state (Scheduled, Running, Suspended, Completed, or Problems). New functionality has been added to the Notification system (rule creation) that allows you to easily associate specific jobs with a notification rule."
    And then here is a detailed step by step on creating notifications:
    http://www.oracle.com/technology/obe/obe10gEMR2/Quick_Start/notification/notification.htm
    Hope that helps,
    Tony

  • SM:EXEC SERVICES background job Failing

    Hi All,
    I am having a problem with the job SM:EXEC SERVICES in solution manager system, I have done all the steps in sapnote 727998, applied the transport given by sapservx but no luck.I suppose this is a very comon problem and should have solved by applying the mentioned note.Here are the logs of the job ..
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has 
    come across a statement that unfortunately cannot be executed.                                                                               
    The following syntax error occurred in program "RDSVASAABAP_TRANS__________072
    " in include "RDSVASIABAP_TRANS__________072 " in                            
    line 3074:                                                                    
    "Field "/SSF/DHEAD-GUID" is unknown. It is neither in one of the specif"      
    "ied tables nor defined by a "DATA" statement. "DATA" statement."             
    Regards,
    Jawad

    Hi Jawad,
    according to service.sap.com/supporttools->ST-A/PI ->Installations and Patches:
    "The Service Tools for Applications Plug-In must be installed on all SAP Systems in your system landscape including the SAP Solution Manager."
    So the answer is yes.
    best regards,
    -David.

  • CCMS Monitor to Pager for Failed Background Jobs

    Hello Experts,
    I am currently leveraging Central CCMS monitoring to alert us via email whenever a background job fails in production using the MTE Class R3BPServerSpecAbortedJobs.
    I am trying to find a way that I can tweak the monitor to alert me ONLY when specific background jobs fail.
    We want this alert to notify the oncall pager only when a handful of critical jobs fail. Does anyone know how I can delimit this MTE?
    For example, we will be creating jobs that begin with Z_ALERT* that I will tie to an auto-react method that will email a pager.
    Thanks in advance.
    Bill

    Hi Sundara.
    From following link, you can download step by step setup information.
    So please check following documents.
    http://www.service.sap.com/bpm
    =>Media Library=>Technical Information
    =>1. Business Process Monitoring - Setup Roadmap
    =>2. Setup Guide - Business Process Monitoring
    Before you start setup, I recommend you to check
    SAP Notes 521820 to ensure whether you already fulfill
    prerequestions.
    Basically what you have to do is following.
    1. Describe your business process under following area.
       (T-CD DSWP =>Solution Landscape =>Solution landscape maintenance)
    2. Setup BPMon session.
       (T-CD DSWP =>Operation Setup => Solution Monitoring =>
        Business Process Monitoring)
       in BPMon session, select job monitoring. And define background
       job that you want to monitor.
       In BPMon job monitoring, you can monitor, cancel, delay, duration,
       unexpected parallelization, also job log and so on.
    I hope this information help you.
    Best Regards
    Keiji Mishima

Maybe you are looking for

  • Windows 8.1 itunes wont recognize iphone

    Go to your device Manager by: Going the search in your charm bar and typing in Device Manager. Expand Portable devices and or Universal Serial Bus controllers and look for your device. Right-click the Apple iPhone, Apple iPad, or Apple iPod entry in

  • Unicode Attribute - Necessary before Unicode Conversion?

    We are about to upgrade to ECC 6.0 with a Unicode conversion. I know that the "Unicode Checks Active" flag must be set in every customer program in order for the code to run in an ECC 6.0 unicode environment. My question is does this HAVE to be done

  • Create a grid or table layout report

    <p>Hi,</p><p> Anyone knows what's the simplest way to create a grid or table report using CR4E? my report is very simple, a list of POJO and want to display it in a table.</p><p>I guess you could add outside borders to each field, is there any simple

  • Log file is not created.

    Hello , I have executed the export command on a user at my office, with the log=<file name>.log parameter. It worked great. The same query when i am trying to execute on the client's server it give's me error and when i execute it without the log par

  • Built in dictionary words priority

    hello I have both N82 and N79, when I compose sms usually the most used words is not suggested for 1st. This make me an idea/improvement: the possibility to choose what word you want the phone suggest for 1st!  so you dont have always to select your