IF clause in stored proc

Hi ,
I need to have to take all the old values from a table except for one column name :old.a_number in and assign it a different value
so if a_number then
a_number == cnumber
it's inside a loop and if the operation is an delete then the a_number == cnumber;
any ideas ?

Maybe you really want something like this (not really clear):
insert into other_table(cola,colb,colc,flag)
select cola,colb,CASE WHEN flag =1 and colc = somenumber then someothernumber else somenumber END
from original_table
i.e. maybe you don't need a slow-by-slow loop, you can do what you want in SQL, and you relace the IF logic with a CASE
Jon

Similar Messages

How can you set the max row for a 'open cursor' in a stored proc?

I would like to know how can you set the maximum amount of row returned in a resultset coming from a stored proc?
You can do it via JDBC with cStatement.setMaxRows(10); but it works only for select that you do via JDBC...
I would like the same functionality using open cursor inside a stored proc...
Thanks...

is "where ROWNUM <= 10" the equivalent of "cStatement.setMaxRows(10);" because the ROWNUM as problem with the ORDER BY clause and the setMaxRows() as no problem...

Using collection as a stored proc. parameter

I have a requirement of a using a stored proc ('in') parameter as a collection and using it futher in the where clause of a sql query. What are my options here ? I am currently trying with a nested table, getting errors in using with sql query.
What are my options here ?

sql>create or replace type NumberTable as table of number;
2 /
Type created.
sql>create or replace procedure p_test
2    (p_list in NumberTable)
3 is
4    v_count pls_integer;
5 begin
6    select count(*)
7      into v_count
8      from table(p_list);
9    dbms_output.put_line( 'Count: ' || v_count );
10 end;
11 /
Procedure created.
sql>declare
2    v_list NumberTable := NumberTable(1, 2, 3, 4, 5);
3 begin
4    p_test(v_list);
5 end;
6 /
Count: 5
PL/SQL procedure successfully completed.There are some cases where you need to use CAST with the TABLE function:
table(cast(p_list as NumberTable))

How to set variable values in Stored Procs

Hi all,
please excuse my newbie questions - I've spent too long using SQL Server......
Anyway,
I'm playing with SP basics and was wondering how I can set a variable value in a stored proc, ideally getting a value from a table or some select .
for instance...........
CREATE OR REPLACE PROCEDURE RPT_SP_ANT_TESTING
P1 IN NUMBER,
P2 IN VARCHAR2
IS
TmpNum NUMBER;
TmpStr VARCHAR2(255);
BEGIN
--How do set these?
SET TMPNUM := SELECT Count( * ) FROM ALL_TABLES;
SET TMPSTR := P2 + '_APPENDED';
INSERT INTO TEST_TABLE
( STRINGFIELD, NUMBERFIELD )
VALUES
( TmpStr, TMPNUM )
END;
Regards
DC

Some ways are...
setting directly
x := 1;
setting from a select use INTO clause
select 1 into x from dual
setting from a select into a collection type use BULK COLLECT INTO
select name bulk collect into lName from your_table.
It would be better if you read the document.
Thanks,
Karthick.

Spatial Stored Proc Causing ORA-29902

Good afternoon,
I am getting an Oracle exception thrown when I try to run a spatial stored procedure.
ORA-29902: error in executing ODCIIndexStart() routine
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_9I", line 368
ORA-06512: at line 1
Prepared Statement:
SELECT s.length,
s.lki_segment_ext_id,
sg.lki_segment_number,
sg.geometry segment_geometry,
h.highway_number || h.highway_letter highway,
h.description highway_description
FROM cis_lki_segment_node_ext sn,
cis_lki_segment_ext s,
cis_lki_segment_geometry_ext sg,
cis_lki_highway_lki_segment hs,
cis_lki_highway_ext h
WHERE sn.lki_segment_node_ext_id = s.begin_lki_segment_node_ext_id
AND s.lki_segment_ext_id = hs.lki_segment_ext_id
AND hs.lki_highway_ext_id = h.lki_highway_ext_id
AND sg.lki_segment_number = s.segment_number
AND sn.version_id = in_lki_version_id
AND sg.version_id = in_geometry_version_id
AND hs.primary_highway_flag = 'Y'
AND SDO_RELATE(sg.geometry, in_geometry, 'mask=ANYINTERACT querytype=WINDOW') = 'TRUE';
I have been able to run this query successfully in a SQL window. The odd thing is that if I remove the "AND hs.primary_highway_flag = 'Y'" clause from the Procedure it then works fine.
I have also tried a sub select of the table(s) in the FROM part and same results. works great in SQL not at all as a Procedure.
I even swapped out the PRIMARY_HIGHWAY_FLAG with another string compare from the same table and the error message was the same.
Does Spatial have some problems dealing with string parsing?
Eric W

No Vicky,
We still have the same problem and our workaround was to return the value we were filtering on and handle it on the Java side.
sgreener, (sorry I did not reply earlier I was pulled off onto another project)
The in_geometry is passed into the procedure. It looks for features from a user defined area.
Albert, I have had our in house Oracle guru look this over and he does not get it either. He has re-worked it a couple of times running it through explain plan and like I had said, as a sql statement it works great but when we plug it in as a stored proc then it does not work
As for As for Oracle version we are currently using 9i (9.0.4)
I am a GIS developer so I am quite familiar with how Geometry is/ can be handled while our Oracle guru, while an old hat at it is new to working with Spatial data. So in this case we are both at a loss.
Eric W

If statement in stored proc

hi
i have stored proc like this
ALTER PROCEDURE [dbo].[p_member]
@MemberID INT = NULL,
@ID INT = NULL,
@Type varchar(20) = NULL
AS
IF NOT EXISTS (SELECT Memberid FROM Member mcd JOIN Pro p WITH(NOLOCK)
on mcd.ProgramID = p.ProgramID WHERE ((mcd.MemberID = @MemberID) OR (mcd.ID = @ID and p.CD = @Type)))
BEGIN
select 'CAN''T BE FOUND'
END
i am not sure what i am doing in if statement, its not working.my logic should be like
check if atleast on or the other is available ..ie memberid or id+type, if nto i need to print message.
thanks

What do you get for the following:
DECLARE @MemberID INT = 444,
@ID INT = NULL,
@Type varchar(20) = NULL;
IF NOT EXISTS (SELECT Memberid FROM Member mcd JOIN Pro p WITH(NOLOCK)
on mcd.ProgramID = p.ProgramID WHERE ((mcd.MemberID = @MemberID) OR (mcd.ID = @ID and p.CD = @Type)))
BEGIN
select 'CAN''T BE FOUND'
END
ELSE SELECT 'FOUND'
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

** How to use TO_DATE function in Stored Proc. for JDBC in ABAP-XSL mapping

Hi friends,
I use ABAP-XSL mapping to insert records in Oracle table. My Sender is File and receiver is JDBC. We use Oracle 10g database. All fields in table are VARCHAR2 except one field; this is having type 'DATE'.
I use Stored procedure to update the records in table. I have converted my string into date using the Oracle TO_DATE function. But, when I use this format, it throws an error in the Receiver CC. (But, the message is processed successfully in SXMB_MONI).
The input format I formed like below:
<X_EMP_START_DT hasQuot="No" isInput="1" type="DATE">
Value in Payload is like below.
<X_EMP_START_DT hasQuot="No" isInput="1" type="DATE">TO_DATE('18-11-1991','DD-MM-YYYY')</X_EMP_START_DT>
Error in CC comes as below:
Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_EMP_DETAILS' (structure 'STATEMENT'): java.lang.NumberFormatException: For input string: "TO_DATE('18"
Friends, I have tried, but unable to find the correct solution to insert.
Kindly help me to solve this issue.
Kind Regards,
Jegathees P.
(But, the same is working fine if we use direct method in ABAP-XSL ie. not thru Stored Procedure)

Hi Sinha,
Thanks for your reply.
I used the syntax
<xsl:call-template name="date:format-date">
<xsl:with-param name="date-time" select="string" />
<xsl:with-param name="pattern" select="string" />
</xsl:call-template>
in my Abap XSL. But, its not working correctly. The problem is 'href' function to import "date.xsl" in my XSLT is not able to do that. The system throws an error. Moreover, it is not able to write the command 'extension-element-prefixes' in my <xsl:stylesheet namespace>
May be I am not able to understand how to use this.
Anyway, I solved this problem by handling date conversion inside Oracle Stored Procedure. Now, its working fine.
Thank you.

Replacing null values in optional prompts and passing to stored proc

Hi,
I want to create a stored procedure with OPTIONAL prompts. When user does not pass a value for that parameter, I want to set the value for that parameter by selecting from a column in table then I WANT to use that paramvalue in sql within cursor of stored proc. How do I do that?
In short, I want to do the following Here is the psuedocode:
Create or replace procedure test (param IN varchar2 DEFAULT NULL)
As
var_param varchar(20);
select param into var_param from dual;
If param is null then select custid from table1 else var_param
OPen ref_cursor for
Select xyz from table2
where fyy = var_para
Can someone let me know the syntax on how to do this in stored proc?
Regards,
hena
Edited by: 904385 on Dec 25, 2011 7:04 AM

Hi,
Merry Christmas, and welcome to the forum!
Here's one way to do what you requested:
CREATE OR REPLACE PROCEDURE     test
(    param     IN     VARCHAR2     DEFAULT     NULL
AS
    ref_cursor     SYS_REFCURSOR;
    var_param     VARCHAR2 (20)     := param;
BEGIN
    IF var_param IS NULL
    THEN
     SELECT     custid
     INTO     var_param
     FROM     table1
--     WHERE     ...     -- Unless table1 has only 1 row
    END IF;
    OPEN ref_cursor
    FOR   SELECT xyz
       FROM       table2
       WHERE       fyy     = var_param;
END     test;Whatever you're trying to do, this is probably niot the simplest or most efficient way to do it.

How to generate a report in pdf from a stored proc

Hi, i need guidance on how to generate a report in pdf from an oracle stored proc.
The environment is oracle 10gas + 10gdb.
On a specific event, a PL/SQL stored procedure is called to do some processing and at the end of the processing to generate report which has to be sent to the printer (and optionally previewed by the user).
Can anyone assist me with this?

Hi ,
One 'simple' way is by using the DBMS_SCHEDULER db package and the procedure CREATE_JOB(....) using as job_type the value 'EXECUTABLE'...
Read for further info in 'PL/SQL Packages and Types Reference'.
If you have access to OEM ... you can configure this there using wizard.....
Other way is to use the External Procedure call capabiblity of Oracle DB Server...:
http://www.oracle.com/pls/db102/ranked?word=external+procedure+call&remark=federated_search
My greetings,
Sim

Crystal Report using Stored Proc in JSP problem

Hello,
I am running a simple report using a stored proc(oracle). It runs fine when I run the report through Crystal. But when I tried running it using JSP it gives me this exception -
com.crystaldecisions.report.web.viewer.CrystalRepo rtViewer
Error formatting page : Unexpected Query Engine error
Can some one pls advise why I am not able to run this report through JSP?
My other reports with simple sql runs fine in my JSP.
Here is my stored proc --
PACKAGE BODY MY_TEST
AS
PROCEDURE getrecordset
p_cursor OUT cursor_type
IS
BEGIN
OPEN p_cursor FOR
SELECT
FROM
DSR_CLASS_SET;
END;
END MY_TEST;

Thanks for your comments.
If I run the same query, report runs fine. So I guess it should also able to run this stored proc.
Here is the detailed error ---
Category:     com.crystaldecisions.reports.reportengineinterface
Message:          failed to process getPage request
Location:
Thrown:
com.crystaldecisions.reports.reportengineinterface.EngineException: Error formatting page : Unexpected Query Engine error
     at com.crystaldecisions.reports.reportengineinterface.Engine.getPage(Unknown Source)
     at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.getPage(Unknown Source)
     at com.crystaldecisions.report.web.viewer.ReportAgent.a(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewer.goto(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
     at jsp_servlet._crystal.__test._jspService(__test.java:225)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Caused by: com.crystaldecisions.reports.formatter.formatter.c: Unexpected Query Engine error
     at com.crystaldecisions.reports.formatter.formatter.objectformatter.bf.<init>(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.objectformatter.bf.a(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.d.j.<init>(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.d.j.if(Unknown Source)
     ... 19 more
Caused by: com.crystaldecisions.reports.dataengine.k: Unexpected Query Engine error
     at com.crystaldecisions.reports.dataengine.ap.case(Unknown Source)
     at com.crystaldecisions.reports.dataengine.ap.jO(Unknown Source)
     at com.crystaldecisions.reports.dataengine.ap.aC(Unknown Source)
     at com.crystaldecisions.reports.dataengine.ap.aD(Unknown Source)
     at com.crystaldecisions.reports.dataengine.ap.case(Unknown Source)
     at com.crystaldecisions.reports.dataengine.au.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.a0.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.a0.aa(Unknown Source)
     at com.crystaldecisions.reports.dataengine.a0.<init>(Unknown Source)
     at com.crystaldecisions.reports.dataengine.a0.<init>(Unknown Source)
     at com.crystaldecisions.reports.dataengine.a0.a(Unknown Source)
     ... 23 more
Caused by: com.crystaldecisions.reports.reportdefinition.datainterface.d: Unexpected Query Engine error
     at com.crystaldecisions.reports.reportdefinition.datainterface.b.a(Unknown Source)
     ... 34 more
Caused by: com.crystaldecisions.reports.queryengine.al: Unexpected Query Engine error
     at com.crystaldecisions.reports.queryengine.driver.l.if(Unknown Source)
     at com.crystaldecisions.reports.queryengine.ao.dZ(Unknown Source)
     at com.crystaldecisions.reports.queryengine.ao.f(Unknown Source)
     at com.crystaldecisions.reports.queryengine.ao.dK(Unknown Source)
     at com.crystaldecisions.reports.queryengine.b0.dB(Unknown Source)
     at com.crystaldecisions.reports.queryengine.bz.a6(Unknown Source)
     ... 35 more
Any guess why I get this?

Error creating Crystal Report using Stored Proc Universe

Hi,
I have created a stored procedure Universe, using the new feature available in XI R3.
This connects to an Oracle database, executing a PL/SQL procedure returning ref cursor.
I have created a WebI report using this Universe, which works fine and functions as expected.
So there are no problems with either my Oracle stored proc or the Universe.
However, I would like to create a Crystal report (2008) using the same Universe.
I can create the report ok - using the SP Universe.
When I attempt to refresh the data I get an error:
Failed to retrieve data from the database.
Details: ORA-06550: line 1, column 7:
PLS-00103: Encountered the symbol "." when expecting one of the following:
begin case declare etc etc
.................................My Procedure ...................
CREATE OR REPLACE PROCEDURE BIADM.Bo_Test_Report_R
(Deposit_Cursor IN OUT SYS_REFCURSOR)
IS
BEGIN
OPEN Deposit_Cursor FOR
SELECT DISTINCT foracid "A/C"
, acct_name "A/C Name", acct_opn_date "OP/Date", schm_code "SchmCode"
FROM gam@finrpt
WHERE acct_cls_flg ='N'
AND foracid ='2252020145001';
--AND cust_id ='CB2020145'
END Bo_Test_Report_R;
Please Give me solution as early as possible.
Masud Iqubal

Moved to Universe Design forum.

Stored Proc and dates

Hi All,
Fairly new at this, and a little confused with dates and date formats.
I run the following:
alter session set nls_date_format = 'dd/mm/yyyy'
If I select sysdate from dual:
02/11/2008 --> so this is correct.
Now what I can't figure out is why I get different results if I use an sql statement VS a stored proc.
If I run this sql update statement:
UPDATE MAPPER.CONV_CNSTNTS
SET CN_VALUE = TO_DATE('12/05/2007','MM/DD/YYYY')
WHERE CN_TYPE = 'CONV'
AND CN_REFRNCE = 'CONVDATE';
When I select this data it shows: 12/05/2007
This works perfect.
Now if I take the exact same statement and put it in a stored proc i get a different result:
create or replace procedure proc_test_date as
begin
UPDATE MAPPER.CONV_CNSTNTS
SET CN_VALUE = TO_DATE('12/05/2007','MM/DD/YYYY')
WHERE CN_TYPE = 'CONV'
AND CN_REFRNCE = 'CONVDATE';
COMMIT;
end;
When I select this data it shows: 05-DEC-07
Why is there a difference here? Is there a difference in the NLS settings that are used when you run an sql statement vs a stored proc?
Thanks for your help in advance.

Thank you for the quick response.
Glad I am on the right track ... NLS settings are painful :)
So I ran: alter session set nls_date_format = 'Month DD, YYYY';
Ran my proc and then the select.
Still the date shows up as: 05-DEC-07
I looked at the nls_parameters
select * from v$nls_parameters
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT Month DD, YYYY
NLS_DATE_LANGUAGE ENGLISH
I am using Oracle SQL Developer. I made sure these were set as well:
Tool >> Preferences >> Database >> NLS Parameters
Date Format --> MM/DD/YYYY
Seems that I am missing something ...

Session id and Stored Proc

How to store session id in a variable and use that in a stored proc as input param.
I have a Stored proc in oracle which uses one input param, i want to pass session id to this proc..
I have created a procedure from odi, and called SP from it..placed this ODI proc in a package...bt dnt knw how to pass session id as input param..

Hi Andy,
You can create a varaible using substitution API for this,
select <%=odiRef.getSession("SESS_NO")%> from dual
And in the successive call SP pass the variable like #VAR_NAME
Thanks,
G

Unable to pass the values to stored proc using presentation variable in OBI

Hi All,
Need your help regarding in resolving an issue in OBIEE 10.1.3.4.1
There is an OBIEE requirement whereby two prompts need to be defined.
1. Textbox prompt
2. Drop-down prompt
The dropdown values should be populated using textbox prompt. So, we have used presentation variable in textbox prompt and passing the same to select query of drop-down.
Until this step, the report works just fine.
Now, the value in both textbox and drop-down needs to be passed to stored proc.
While trying to pass the values by using the presentation variable, the following error comes-up saying
Session variable has no value definition.
Note:Although the corresponding session variable has been set to default value,still the error appears.
Please advise.
Regards,
Prasad

"Session variable has no value definition" I'm assuming typo error and it should be presentation variable.
Set default value for presentation variable that may work

Stored Proc running twice using DBMS_Scheduler

Hello all,
I have a vb front end that calls a main stored proc which submits scheduler jobs to execute several stored procs asynchronously. Everything is working, except the part that the several stored procs are running twice. In the troubleshooting, I have eliminated the front end from being the culprit and the stored procs themselves. Essentially, when I call the stored proc using dbms_scheduler.create_job, it runs twice, even manually. I am about at wits end trying to figure out why: Using Oracle 11gR2
I started off setting up the programs
begin
--create program
dbms_scheduler.create_program
( program_name => 'prog_name'
,program_type => 'STORED_PROCEDURE'
,program_action => 'usp_sub_proc_1'
,number_of_arguments => 8
,enabled => FALSE
dbms_scheduler.DEFINE_PROGRAM_ARGUMENT
( program_name=> 'prog_name'
,argument_position=>1
,argument_name => 'name'
,argument_type=>'VARCHAR2'
/*the remaining 7 arguments are in code but not display for space reasons*/
dbms_scheduler.enable('prog_name');
end;Then the main stored proc executes this code:
declare v_job_name varchar2(100);
    v_1 varchar(50) := 'All';
    v_2 varchar(50) := 'All';
    v_3 varchar(50) := 'All';
    v_4 varchar(50) := 'All';
    v_5 varchar(50) := 'TEST';
    i_6 integer := 1;
    v_7 varchar(50) := 'TEST_NE';
    ts_8 timestamp := current_timestamp;
begin
    v_job_name := 'uj_dmo_1';
dbms_scheduler.create_job (v_job_name
                                        ,program_name => 'prog_name'
                                        ,job_class => 'UCLASS_1'
                                        ,auto_drop => TRUE
--set parameters
dbms_scheduler.set_job_argument_value(v_job_name,1, v_1);
dbms_scheduler.set_job_argument_value(v_job_name,2, v_2);
dbms_scheduler.set_job_argument_value(v_job_name,3, v_3);
dbms_scheduler.set_job_argument_value(v_job_name,4, v_4);
dbms_scheduler.set_job_argument_value(v_job_name,5, v_5);
dbms_scheduler.set_job_argument_value(v_job_name,6, to_char(i_6));
dbms_scheduler.set_job_argument_value(v_job_name,7, v_7);
dbms_scheduler.set_job_argument_value(v_job_name ,8, to_char(ts_8));
--enable job
dbms_scheduler.enable(v_job_name);
--execute job
dbms_scheduler.run_job(job_name => v_job_name , use_current_session => FALSE);
end;
...And this is where I get the double execution of the job, but I am just not seeing it in my syntax, dba_scheduler_jobs, logging, etc. Any help is greatly appreciated, thanks!!

Well apparently I will not win any Captain Obvious awards;
With 34MCA2K2's response with "what doesn't work" for some reason turned the light on. After some more testing here is what I found.
This code works as expected :
Exhibit A
begin
dbms_scheduler.create_job (job_name =>'TESTER'
                               ,job_type => 'PLSQL_BLOCK'
                               ,job_action => 'declare test1 integer := 1; begin test1 := test1 + 5; end;'
                               ,auto_drop => True
   /*dbms_scheduler.enable('TESTER');   */
   dbms_scheduler.run_job(job_name => 'TESTER', use_current_session =>FALSE);
end;As does this:
Exhibit B
begin
dbms_scheduler.create_job (job_name =>'TESTER'
                               ,job_type => 'PLSQL_BLOCK'
                               ,job_action => 'declare test1 integer := 1; begin test1 := test1 + 5; end;'
                               ,auto_drop => True
   dbms_scheduler.enable('TESTER');
/*dbms_scheduler.run_job(job_name => 'TESTER', use_current_session =>FALSE);    */
end;Exhibit A will create the job and is visible in the schedulerjobs view, and the RUN_JOB will execute it even when not enabled, but the pl/sql will not drop the job.
Exhibit B will create the job and once enabled, executes the job and then drops from schedulerjobs view.
Therefore, my desired results for running the jobs once asynchronously and dropping immediately is....
begin
    v_job_name := 'uj_dmo_1';
dbms_scheduler.create_job (v_job_name
                                        ,program_name => 'prog_name'
                                        ,job_class => 'UCLASS_1'
                                        ,auto_drop => TRUE
--set parameters
dbms_scheduler.set_job_argument_value(v_job_name,1, v_1);
dbms_scheduler.set_job_argument_value(v_job_name,2, v_2);
dbms_scheduler.set_job_argument_value(v_job_name,3, v_3);
dbms_scheduler.set_job_argument_value(v_job_name,4, v_4);
dbms_scheduler.set_job_argument_value(v_job_name,5, v_5);
dbms_scheduler.set_job_argument_value(v_job_name,6, to_char(i_6));
dbms_scheduler.set_job_argument_value(v_job_name,7, v_7);
dbms_scheduler.set_job_argument_value(v_job_name ,8, to_char(ts_8));
/*enable job*/
dbms_scheduler.enable(v_job_name);
/*execute job (Do not execute the code below, it will lead to multiple executions)
dbms_scheduler.run_job(job_name => v_job_name , use_current_session => FALSE); */
end;

IF clause in stored proc

Similar Messages

Maybe you are looking for