If column2 is same for two different column1 data

I have a table say XYZ like this
COLUMN1 COLUMN2
A     B
C     B
N     X
HJ     X
I want to print if column2 is same for two different column1 data
I want to print that rowids
Please help me in this

That's the same as I thought, but then I realised that this might result in some false positive rows.
What if column1 has also the same value for some of the rows in which column2 is the same?
If the following is your data set, what rowid's should be displayed?
row column1 column2
1        A       S
2        B       S
3        C       T
4        C       T
5        D       U
6        D       U
7        D       V
8        E       W
9        F       W
10        F       W

Similar Messages

I am trying to store music for two different iPods on the same computer, against two different Apple IDs. When I try and download content from the Cloud I get an error message?

I am trying to store music for two different iPods on the same Windows 8 computer, and when I try and download content from the Cloud I get an error message. Is it possible to have two different Apple IDs on the same computer?

Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

Same number range for two different series groups?

Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.

With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop

HT201269 Can I set up two accounts for two different iPhones on the same iTunes account. Jimmy

Hello,
CanI set up two accounts for two different iPhones on the same iTunes account. Thanks JIMMY

http://support.apple.com/kb/ht1495
You can use the same apple id for two separate phoones to share apps/music, however you would need a separate apple id for both phone for imessage/facetime/icloud.

Can i load two different itunes on the same computer for two different ipods?

Can I load two different itunes on my computer for two different ipods? Or how can I get it so that when I click on itunes, only my songs come up and not my wifes? And the same for her.

Yes. The simplest way is to have separate Windows accounts for each user. When either user runs iTunes, he/she will have a separate library with distinct content, playlists, etc., and can sync individual iDevices as needed.

Using Same Bank Account for two different company code

Can we use the same bank account number and ABA key for two different company codes? Both the company codes are in USA and with the same currency.
Scenario is to separate one division of the company code to a separate company code. Client wanted to know if we can use the same bank account so that they dont have to open another bank account

The system will allow the same ABA and bank account on two different company codes. However, if you use electronic bank statement (EBS) functionality (or plan to use it in the future), you will not be able to import bank statements for the account if it exists on two company codes. The EBS program uses the house bank/account ID tables to assign a company code to the bank statement. If the account exists for more than one company code, the program cannot assign a company code and it will give an error.
Regards,
Shannon

HT4314 I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not ha

I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?

By "game center account", do you mean Apple ID?
If so, you can change it.
1. Tap settings and navigate to iTunes and App Stores
2. Tap "Apple ID" and then tap "Sign Out"
3. Log in with a different ID.

Same query takes different time for two different users with same privileges

Hi,
Just wanted to know if it is possible for an INSERT query to take different amount of time for two different users for the same volume of data. If so, what could be the reason? I would like to add that we are not executing the query simultaneously. But it is always faster for user1(within 10-20 seconds) and slower for user2(takes around 8-10 minutes).

Show execution plan for each user. I think there is other reasons which you didn't not tell

Sales Deal with two different validation dates for the same material

Hi SAPers,
I am trying to create a u201CSales Dealu201D VB31, for the same material/condition, but with two different validation dates. After the creation of the first record, I select u201CNew conditionu201D button, but the system give me the message VK104, u201Cthe condition is being processed in the current session.u201D.
How can I solve this issue?
Thanks in advance.
Pedro

We can't have multiple records for the same condition and key values valid on the same date. The condition end date is part of the primary key in the database table. The date ranges between the records cannot overlap. When you create a new record, usually the end date is set to 12/31/9999 by default. If you need to have this deal to end on a different date and a new deal to start afterwards, then first you need to change 12/31/9999 to a different date.
Also usually I try to exit the screen between the transactions.

Is it possible to use the same Switch for two different clusters.

I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.

user9198027 wrote:
I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.
Yes. Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

How to use same RESULT SET for two different events

hello friends,
I need to use same result set for two different events. How to do it.
here My code,
private void jComboBox1ItemStateChanged(java.awt.event.ItemEvent evt) {
// TODO add your handling code here:
try
String selstate,selitem;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con=DriverManager.getConnection("jdbc:odbc:tourismdatasource","sa","");
selstate="select * from tab_places where state=?";
PreparedStatement ps=con.prepareStatement(selstate);
ps.setString(1, jComboBox1.getSelectedItem().toString().trim());
ResultSet rs=ps.executeQuery();
if(rs.next())
jTextField1.setText(rs.getString("place_ID"));
jTextField2.setText(rs.getString("place_name"));
jTextField3.setText(rs.getString("category"));
byte[] ba;
ba=rs.getBytes("image");
ImageIcon ic = new ImageIcon(ba);
jLabel6.setIcon(ic);
in=true;
catch(ClassNotFoundException cfe){JOptionPane.showMessageDialog(null, cfe.getMessage());}
catch(SQLException sqe){JOptionPane.showMessageDialog(null,sqe.getMessage());}
Now i need the same Result Set(rs), in another event(jButton6ActionPerformed),
private void jButton6ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
} how do i get dat resultset,
help me out

One post wasn't enough?
{color:0000ff}http://forum.java.sun.com/thread.jspa?threadID=5246634{color}
db

Ability to set same Start date for two different discrete Job in ASCP

We have two ATO Items and these to be built & shipped together which have different leadtimes, How we can have achieve same start date when we release from ASCP.
E.g: ATO_Model1*24234 SO Line 1, the rolled up LT=10Days
ATO_Model2*325325, the rolled up LT=3
So, under normal scenario ASCP will suggest two different release dates based on LT. So, I would like to start both Job togther considering the max leadtime.
Hoping for your expert advice.
Thanks
Edited by: user604737 on Nov 10, 2010 9:55 AM

Hi,
964188 wrote:
It is a date
Such as
10/31/2012 11:55:03 PMThen, as Hoek says, you don't want TO_DATE. For example:
WHERE   TRUNC (start_datetime) = TRUNC (SYSDATE - 7) or the more efficient
WHERE   start_datetime >= TRUNC (SYSDATE - 7)
AND     start_datetime < TRUNC (SYSDATE - 6)Also, it doesn't look like the EXISTS sub-query is corelated to the main query. That's almost certainly a mistake.
If you're still having trouble, post your revised query, a little sample data (CREATE TABLE and INSERT statements). Point out where that query is givimg the wrong results, and explain how to get te right results.
See the forum FAQ {message:id=9360002}

How can I define same Price Conditions for two different Sales Deals ??

I need to define for the same price condition, lets say ZPMP, two different values or condition records, for two different sales deals and the same valid dates
For example, Sales deal 1, ZPMP equal to USD 15 and valid dates from 04/15/08 to 04/30/08.
Another condition record for Sales deal 2, ZPMP equal to USD 20 and valid dates from 04/15/08 to 04/30/08
How can I do this.
Thanks in advance.

While creating condition tables, you have the option to create different key combinations. So if you want the system to take different condition records for different sales deals, there has to be a point of differentiation between those 2 sales deals.
This can be done in one of the following ways:
by giving customer specific prices
by giving material specific prices for a particular customer etc
All this can be defined as different key combinations while creating the condition tables. For each key combination, you can specify different condition records, so that the system is able to pull prices according to the requirement.
But if the sales deals are entirely similar (that is even the validity dates, delivery dates etc are also same), and there is no differentiating factor, then you will have to manually input the prices.
Do get back if you require more clarification. Please reward points if useful.
Regards,
Swapna

Same Apple ID for two different country accounts?

Is it possible to use just one Apple ID for two different iTunes accounts? I've recently located to Australia from the uk and want to run an iTunes Store account in each but with just one apple id and email address. Can it be done?

You have to be in a country to use its store (and an account can only have one billing address on it), so whilst you are in Australia you can only use the Australian store, you cannot use the UK store (including redownloading past purchases). You can either update your billing address on your existing account to have your Australian address on it, or create a new account with your Australian billing address on it
Changing country on an account : Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account - Apple Support.

One PO for two different vendors

Hi Experts ,
My Questions are ......
Can we maintain two different vendors for two different materials and create one PO ? ;
How does it work ?
How is it sent to different Vendors ?.
Will the vendor receive one general PO containing all line item materials from different vendors...or Each vendor will receive his own line item PO (PO Split)...
Regards
Albert

Hi Albert,
Your qns-
Can we maintain two different vendors for two different materials and create one PO ? ;
Yes you can maintain 2 different vendors for 2 different materials. But you cannot create a single PO (i.e. PO with same number) for 2 different vendors. I do not understand why you want to create one PO for 2 vendors supplying different materials. Can you please explain the logic for it?
Vivek

If column2 is same for two different column1 data

Similar Messages

Maybe you are looking for