IF Condition in Calculated Key Figure .

Hi,
   can anyone can tell the syntax for using "If Statement in Calculated key figure ".

Hi,
If amt1 ne amt2.
  select amt1.
endif.
Try the following for above condition :
Create a formula varible.
1) select 'amt1'.
2) Go to boolean, select 'is not equal to'.
3) select 'amt2'.
4) select '*'.
5) select 'amt1'.
its looks like
'amt1'<>'amt2'*'amt1'
hope this helps..
regards,
raju

Similar Messages

  • Calculated Key Figures Issue!

    Hello Experts -
    I'm getting error messages for the calculated key figures. The message says that the key figure is not defined correctly. Therefore, I started breaking down the calculated key figures and use them in the eventual calculated key figure. I have included all the calculated key figures. And I've hidden the ones that I dont need to show in my query result. I'm in BI 7.0. Also, I had to remodel my multi-provider after making the initial query. Do I have to start fresh?
    I have the following calculated key figure:
    1. Price = (Price > 0) * Price + (Vendor Price - (Vendor Price * (Cust Discount + Vendor Discount)))
    This is supposed to be an if calculation. If Price is greater than 0, then Price else the calculation.
    Cust Discount and Vendor Discount are CKFs.
    What am I doing wrong?

    Thanks Ajay!
    I added a couple of NODIMs and the query is now working!
    I have couple more questions:
    1. Is there a way to say Not Null in Bex? In my if condition, I want to say if Price is not equal to NULL instead of greater than 0.
    2. The above requirement leads me to another question: how do I account for the negative values. I mean I need to add them but I cannot suppress them? I hope it makes sense!

  • Calculated Key Figures Decimal Place Error

    Hi Experts,
    Wonder if there is anybody to help me out to explain why I am having a problem on the calculated key figures decimal places when if I report on the components of the calculated key figure (restricted key figure) are working correctly?
    The calculated key figure is a boolean formula made up of 2 restricted key figures.  The 2 restricted key figure are having 2 decimal place (one is 0.36 another is 0.00).  In the current condition, the 2 restricted key figure just sums up - 0.36 + 0.00 = 0.36.  However the calculated key figure displayed as 0.359999 (6 decimal places) as the result.
    I am using BEx Analyzer Excel.

    Hi Fang,
    right mouse click on your KF and select properties. Then define the number of decimal places you want.
    Ciao.
    Riccardo.

  • Can a Calculated key figure be derived from characteristic value?

    Hi,
    I would like to know whether BW allows to derive a calculated key figure based on a characteristic value. Let us say we have a row like
    PLANT-DAY-INVENTORYQTY
    and based on my plant value, I want to have another column 'CALCULATEDSCRAP' which is derived from 'PLANT' and INVENTORYQTY (I know this is a crude example, but will do for my need)
    Is there any way in BW to get this logic implemented?
    Thanks,
    Ajay Das

    Hi Tom,
    I have a very similar problem. In my if logic i compare to dates  but I don´t understand what you meen by
    "Therefore I suggested to add an attribute to convert the characteristic in a number and use this number for the if logic."
    For the moment, the condition calculates each field individualy correctly but doesn´t treat them as numbers when aggregating.
    Thanks in advance,
    Victor.

  • Which calculation should not be done in calculated key figures

    Which calculation should not be done in calculated key figures?

    You can be more specific.
    CKF are defined to do the reporting on Key figures which are not existing in Infoprovider.Ideally all the calauculations are to be defined as CKF(Global)/Formula(Local)
    Wel,you may have to do few things in conditions like...finding TOP 10 Customers etc..
    hope this helps you
    Sriman

  • ELSEIF in calculated key figure

    Dear gurus
    We have recently upgraded to NW2004s, and would need some help on the formula for my calculated key figure. This calculated key figure is meant to replicate IF... ELSEIF statement, depending on what the user enters. The logic that we have are as below :
    IF Var=1, then display key figure A
    ELSEIF Var=2, then display key figure B
    ELSEIF Var=3, then display key figure C
    ELSEIF Var=4, then display key figure D
    where Var is a Formula Variable, Processing By User Entry/Default value.
    The formula that we have originally, in BW3.5 is :
    <i>(Var == 1) * 'Amount in TC' + (Var== 2) * 'Amount in Comp Code' + (Var == 3) * 'Amount in Parall USD' + (Var == 4) * 'Amount in Hard Cur' </i>
    This formula has served us well in BW 3.1 to BW 3.5, and never had any problems with it. However, when we migrated over to BW 7.0, we could not get values for this formula (eventhough we have data in our cubes). The only data that get is when we key in Var=1, but when we try with Var=2, 3 or 4, no data is displayed in our key figure.
    We tried to debug, but somehow we could not figure out how the new BW7.0 calculates these type of key figures, and whether is there a change in the formula variable. We believe that the problem may lie in the way that BW 7.0 interprets the formula above, and only obtains the first portion of the formula (Var==1).
    We would appreciate any helps, and of course, points will be awarded if problem can be solved.
    Thanks a lot

    Dear all
    With some luck in searching, I manage to find an OSS note which depicts this error and resolve it. For those who have the same problem, please use this OSS Note 994194.
    Cheers

  • Problem in Calculated Key Figure in BEx 7.0

    Hi All,
    In Bex 7.0
    We have a requirement where we need to display a key figure which is having unit price of an Article. In our InfoProvider we have Article, Store and Date and the report is based on Article. As we have to display only the latest price we have created a RKF by putting a restrcition of the latest date in the date range on the the unit price key figure. But still unit price is getting aggregated over stores.
    For example if there are 10 stores and the unit price of an article is 5, then data displayed is 50 and not 5.
    We tried to create a Calculated Key Figure using the above RKF and an exception aggregation Average of all detailed value that are not zero, null or error on reference characteristic 0PLANT. Its working fine when the query is restricted to one or two Articles. But for all the articles it gives the following error messages.
    1. Error while reading data; navigation is possible.
    2. Error occurred during parallel processing of query 17; RC3
    3. Error executing physical plan: AttributeEngine: no 6952
    4. Error reading the data of infoprovider ZXMSC01$X
    5. Amount of data that is to be read from the BIA server is too large
    6. The following error 6952 occurred in BIA server
    7. Error executing physical plan: AttributeEngine: not enough memory;BwPopMerge pop1(setIsLastMerge(1)),in executor::Executor in cube: p03_zxmsc01
    Can anyone tell me the solution for the above error. Or if there is a workaround to our requirement.
    Regards,
    Sachin

    Hi,
    Could be a memory issue.
    One of your cube in on BIA which is causing the Problem.
    So executing the query in RSRT by selecting Do not use BIA index option.
    If the query is executed with out any issue then take the cube out of BIA and push it back.
    Hope it helps.
    Regards,
    Raghu
    P.S : Also please let us know if this query is live and it is an issue that you are facing after executing it properly for few days.
    Or this is a new query created and testing now and in the process got this error?
    Edited by: Raghu tej harish reddy on Sep 24, 2009 5:53 AM

  • Using Characteristic in Calculated key figure

    Hello every one,
    I need a help. Can anyone help me in solving one requirement.
    I want to know if i can use a Characteristic in calculated key figure.
    Thanks in advance.

    Hi,
    You can try to create a formula variable of type replacement path and supply this char to pull the value from. Evaluate this value as a boolean (1 or 0 for if there is a value or not). Then you can create a new formula using this formula variable and your CKF. If the result is 1, then you get the value of the CKF, or if the indicator returns 0, then you get 0 as the result.
    Hope this helps...

  • Currency translation problem for calculated key figure

    Hi All
    I have a problem with the currency translation for a calculated key figure.
    I have a requirement to show the MM consignment stock value in the specified currency from the selection screen.
    For consignment stock, there is no value maintained in the system. So for this we need to calculate the value as below
    Restricted key figure: RKFConsignment stock: Total stock with special stock indicator restriction "K"
    Calculated keyfigure: Consignment stock value = Nodim( RKFConsignment stock) * (Standard cost / price unit).
    Here, in the calculated keyfigure properties --> I have used a currency translation for the 0CALMONTH.
    The query has selection on the 0calmonth.
    But in the result the I am getting unexpected results.
    Do we have any inconsistencies in the currency translation on the formulas?
    Please help me on this.
    Regards
    S.R

    Hi All
    I have noticed something. I changed my query date selection to Calendar day - Keydate instead of calendar month.
    And I have changed the currency variable to fixed exchange rate "CHF", it is working fine.
    I think I have some problem with the currency translation variable.
    Could anyone of you please send me the currency translation variable for Calendar month with the below parameters
    exch rate  type :  M
    Time reference : 0CALMONTH
                               End of month
    Target currency for a variable : < var created on 0currency>
    For my report,  i need calendar month selection, currency selection.
    Please help me with your ideas.
    Thank you
    Regards
    S.R

  • Currency Translation for Calculated Key figures

    Hello Friends I want to use the Currency Translation for Calculated Key figures.
    But when I go to Query and go to conversion tab it is always greyed out. Does that mean we can set the fixed conversion type for calculated key figures. like ZSAD Total debit - credit -flow value.
    What is the way to do fixed currency translation in query for calculated key figures.
    All the below is done now just want to specify this in query but I can'nt since it is greyed out.
    All the below is done
    I have created a Currency Translation Type " FiscperConversion" "ZVHGR" now this has Exchange Rate Type from Variable "ZVARN" (Which is a variable single value manual input on 0RTYPE Infoobject for exchange rate.)
    2. Now Currency Tab: Target Currency is selected from Variable placed in the Report. ZRPVAR.
    3. Now the Variable Time Reference is used. Standard Infoobject 0FISCPER
    which is beginning of period.

    Hi soniya
    Your calculated KF is result of some calculation ...so system will not allow u to do any translation on it...to get CT on CKF you should do it on base key figure...still if you wish to do then you can create a formula variable having processing type a customer exit...write code in cmod to rad exchange rate and multiply ur CKF by this formula variable....
    Thanks
    Tripple k

  • Currency Translation on Calculated Key Figure in BW7.0

    I am trying to use a currency translation in BW7.0 on a calculated key figure.  Unfortunately the options for this are greyed out in the conversions tab for the calculated key figure.
    I took a simple example.  I have a KF that is revenue.  I put this KF in the query and I can specify the conversion for it.
    I then took the same KF and put it as the only argument for a CKF.  For this CKF whether it is local to the query or a global CKF, I cannot specify a currency conversion.
    If I do the same experiment in the 3.5 design tool, I am able to specify the currency translation.
    Is there some system setting that enables it in the 7.0 query designer?
    Thanks.
    KB

    Hi,
    Have a look at the links:
    http://help.sap.com/saphelp_nw70/helpdata/en/80/1a682de07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/f1/0a5529e09411d2acb90000e829fbfe/frameset.htm
    Best Regards,
    Rajani

  • Using the function SUM() in a calculated Key Figure

    Hi All,
    I need to create a calculated Key Figure and am looking for the function SUM().Can you please let me know where this is present.I have checked under the "Data Functions" and it does not seem to be present there.
    Thanks
    Aravind Pattabiraman

    Hi,
    Make use of aggragation property of the keyfigure, for summing the values of that KF.
    Regards,
    Rajkandula

  • Can one call a function module in Calculated Key Figure?

    Can one call a function module in Calculated Key Figure? If  yes how, if not, what is the solution if formula does not suffice?
    I want to convert duration which is in seconds to   Duration in Hours and Minutes. There is a function module for doing it. Not sure how to do it in a formula.

    One option you have is a Virtual Key Figure and User Exit to use the Function Module to convert the time from seconds to HH:MM. Here are two documents on this subject to help you create them, based on the technology your comfortable with:
    [Implementing Virtual Key Figure/ Characteristics Makes Query More Dynamic|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c&overridelayout=true]
    [Step By Step Process for Virtual Key Figures and Characteristics through BAdi|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c&overridelayout=true]

  • How to add unit to calculated key figures in BEx

    How to add unit to BEx calculated key figures in SAP BW BEx?
    I would like to add a unit to a calculated key figure in SAP BW BEx, so that it gets visible on the end user level. Currently the unit field is empty. I calculated the value from various key figures with different units and removed the units with the NODIM()-function. Is there an inverse function to NODIM() with which you can add a specific unit (like EUR or TAG).
    The "How tou2026 Report Data in Alternate Units of Measure" does not seem to cover the point.
    "Quantity Conversion Guide for SAP Business Intelligence" refers to the "Conversion" tab.
    I suppose you have to add a conversion routine, which is 1:1 and sets the target unit defined in BEx.
    Has anyone tried this? Is there a more simple solution?
    OLAP-Quantity Conversion:
    http://help.sap.com/saphelp_nw70/helpdata/EN/27/b65c42b4e05542e10000000a1550b0/frameset.htm

    Hi,
    if your CKF will have always same unit and you have one KF in you inforpovider with this unit, you can try to do this trick
    create a new hidden CKF as new CKF = KF / KF (with this equale new CKF = 1 unit)
    change your old CKF as old CKF = old CKF * new CKF
    let me know if it works.

  • Calculated Key Figures question

    Hi
    In a Purchase Order report I have included a Calculated Key Figures and this report is transported to the QA environment.
    Then I create another report using the same Calculated Key Figures but when I tried to save the query it gives me an error;
    "The query could not be saved due to a problem in transport"
    "BEx transport request 'BD1K900664' is not suitable or not available".
    I was told that when the 1st report uses that Calculated Key Figures and the report transported over to the QA I cannot reuse the same Calculated Key Figures in the new report. Is this true in SAP BI? If so how can I reuse the same Calculated Key Figures in a new report.

    Hello Lai,
    Once you have transported the earlier report along with the original calculated key figure, create one more request by selecting just the cal. key figure which you want to use.
    dont release this request.
    Now any change you make in the cal. key figure will be stored in this newly created request.
    also go ahead and create a new query using this ckf and save it in the newly created request.
    Then you can always release this and transport the same.
    hope this helps..
    let me know for any further issues...
    thanks,

Maybe you are looking for