If data in Excel sheet Refreshes will it reflect in Xcelsius (html view)

I have created one excel sheet which has data from 2 excel sheets. I have created this excel sheet using excel macros. I am using this excel sheet as input for the xcelsius. Everything is working fine.
But when the data in thr excel sheet is modified it is not getting reflected in Xcelsius.
I have gone through the online material available. But that asks for xml source. I am not using xml as the source for my excel sheet. I am using excel sheet as the source.
Is it possible to update the data in any version of Xcelsius (4.5 or 2008)?

There is an article that can explain how Xcelsius Engage 2008 and higher (not Present) can use XML to update your presentations from a modified Excel spreadsheet. View it  [here|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502f3f56-f17d-2b10-a5bf-a85f12a9c30a]. Another useful tutorial on how it's done is available here [Part 1|http://datapigtechnologies.com/flashfiles/xxmlpart1.html] and [Part 2|http://datapigtechnologies.com/flashfiles/xxmlpart2.html].

Similar Messages

  • Upload data from excel sheet into md61

    Hi Gurus,
                    Can anybody please tell me the solution like how to upload the data from excel sheet into the MD61
    if u suggest me to write an ABAP code then its fine or any other way would be great
    and can u also send me the abap code i would be thankful to all

    Hi,
    I can be done in 2 ways.
    1. Using LSMW you can upload your MD61 demand thru Excel sheet.
    2. You can use BDC to upload the demand from Excel. For this you need to take help from the ABAP. You need to record the macro usinf SHDB and the table maintenance will be taken care by the developer.
    For LSMW you need not depend on your developer, as a functional consultant you can do it yourself.
    Regards,
    V. Suresh

  • Getting short dumps while reading bulky data from excel sheet

    Hi all,
    We have converted our non-unicode based sap system (R/3 4.7, Windows 2003,
    SQL 2000) into a unicode based system recently. We are facing two peculiar
    problems for last few days.
    *Problem 1 - *Whenever we want to upload the data from excel sheet, the
    system throws a dump after reading about 400 entries, while last week the
    same system used to read about 8000 entries in a single go.
    *Problem 2 - *Also, whenever we realease a transport requst from development
    containing a lot of changes, the request will reach the quality system but
    without the changes. but if i ll try to import the changes into quality
    system after generating more than one request containing small small
    changes, they get reflected in QAS immediately. Is there any size
    constraint in transporting a request fro DEV->QAS->PRD.
    Please suggest some ways.
    I am pasting the dump (that I am getting while data uploading from Excel).
    ~~~~~~~~~~~~~~~~~~
    Runtime errors
    MESSAGE_TYPE_X*
    Occurred on
    22.02.2008 at
    13:21:02*
    The current application triggered a termination with a short dump.
    What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
    What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    Error analysis
    Short text of error message:
    Control Framework : Error processing control
    Technical information about the message:
    Diagnosis
    An error occurred when the system tried to process the commands
    from the Automation Queue on the presentation server.
    There are several possible reasons for this:
    - The installation of the SAP GUI on the presentation server is
    faulty or obsolete.
    - There is an error in the application program
    - There is an error in the SAPGUI or an integrated control
    Procedure
    1. Make sure that you have imported the appropriate Support
    Package, the current kernel, and GUI patch for the release of your
    System
    2. Check whether the error occurs locally on one or a few PCs, or
    generally on all PCs. Note whether the error only occurs for some
    users, for example because of a specific Customizing setting.
    If it only occurs locally, this suggests an installation problem
    with the PC. Check the installation; if necessary, reinstall the
    software. In the dump, search for the SY-MSGLI field, since it may
    point to the cause of the error.
    3. Activate the Automation Trace (in accordance with SAP Note
    158985).
    4.Start the transaction and continue until the screen immediately
    before the dump.
    5. From the System -> Utilities menu, choose Autom. Queue,
    Synchronous Processing.
    The status bar of the GUI displays the text:
    "Automation synchron flush mode on"
    6. If you now proceed with the application, the short dump will
    display the ABAP call that caused the error; the Automation Trace
    will contain the error on the presentation server.
    7. If necessary, load the short dump and trace files on to
    sapservX, so that SAP can analyze them.
    Message classe...... "CNDP"
    Number.............. 006
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "MESSAGE_TYPE_X" C
    "SAPLOLEA" or "LOLEAU02"
    "AC_SYSTEM_FLUSH"
    If you cannot solve the problem yourself, please send the
    following documents to SAP:
    1. A hard copy print describing the problem.
    To obtain this, select the "Print" function on the current screen.
    2. A suitable hardcopy prinout of the system log.
    To obtain this, call the system log with Transaction SM21
    and select the "Print" function to print out the relevant
    part.
    3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, you can either use the "PRINT" command in the editor or
    print the programs using the report RSINCL00.
    4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
    System environment
    SAP Release.............. "620"
    Application server....... "nhbho930"
    Network address.......... "192.168.0.30"
    Operating system......... "Windows NT"
    Release.................. "5.2"
    Hardware type............ "4x Intel 801586"
    Character length......... 16 Bits
    Pointer length........... 32 Bits
    Work process number...... 0
    Short dump setting....... "full"
    Database server.......... "NHBHO930"
    Database type............ "MSSQL"
    Database name............ "DEV"
    Database owner........... "dev"
    Character set............ "C"
    SAP kernel............... "640"
    Created on............... "Aug 17 2007 00:18:58"
    Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
    Database version......... "SQL_Server_8.00 "
    Patch level.............. "196"
    Patch text............... " "
    Supported environment....
    Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version..... "640"
    Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
    Windows NT 6.0"
    User, transaction...
    Client.............. 300
    User................ "NHBABAP"
    Language key........ "E"
    Transaction......... "SE38 "
    Program............. "SAPLOLEA"
    Screen.............. "SAPMSDYP 0010"
    Screen line......... 0
    Information on where terminated
    The termination occurred in the ABAP program "SAPLOLEA" in
    "AC_SYSTEM_FLUSH".
    The main program was "ZBDC_CONTRACT ".
    The termination occurred in line 29 of the source code of the (Include)
    program "LOLEAU02"
    of the source code of program "LOLEAU02" (when calling the editor 290).
    ~~~~~~~~~~~~~~~~~~~~~
    Thank you all.
    Cheers.
    Mitra __.____._

    for the 50 millionth time: Excel spreadsheets are NOT databases, you should NOT try to use them as such and NEVER access them using JDBC.
    You should also under NO condition use the JDBC-ODBC bridge driver (that was actually the 78 millionth time that was told someone).

  • Error while exporting data into Excel Sheet

    Hi All,
    I have created a VO which is based on Query(Not based on EO) and the Query is as follows:
    select f.user_name ,
    f.description ,
    a.currency_code,
    a.amount_to ,
    a.amount_from
    from seacds.ar_approval_user_limits_nv a , seacds.fnd_user_nv f
    where f.user_id = a.user_id
    and a.document_type = 'CM'
    order by 2;
    Based on this VO I have created a search page which will search and returns data from the table and finally standard export button will export the data into excel sheet.
    In this am searching the data based on above 5 attributes. Without entering anything in the messageTextInput if i am clicking GO button, it is returning all the data into the table region. After this if i click on Export Button, data are getting exported into Excel Sheet. It is fine.
    But if i am searching the data by entering any value in any of the messageTextInput, it is returning data. But if i am clicking the Export Button then it is throwing the following error:
    Exception Details.
    oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (select f.user_name ,
    f.description ,
    a.currency_code,
    a.amount_to ,
    a.amount_from
    from seacds.ar_approval_user_limits_nv a , seacds.fnd_user_nv f
    where f.user_id = a.user_id
    and a.document_type = 'CM'
    order by 2) QRSLT WHERE (( UPPER(CURRENCY_CODE) like UPPER(:1) AND (CURRENCY_CODE like :2 OR CURRENCY_CODE like :3 OR CURRENCY_CODE like :4 OR CURRENCY_CODE like :5))) ORDER BY DESCRIPTION asc
         at oracle.apps.fnd.framework.OAException.wrapperException(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at OA.jspService(_OA.java:71)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    ## Detail 0 ##
    java.sql.SQLException: Invalid column type
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:175)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:240)
         at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:7895)
         at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:7572)
         at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:8183)
         at oracle.jdbc.driver.OraclePreparedStatement.setObjectAtName(OraclePreparedStatement.java:8206)
    Kindly give me any idea to clear this error.
    Thanks and Regards,
    Myvizhi

    Hi Myvizhi ,
    Did you try running the query from back end that got generated in the error trace ? see if that query is returning desired
    output .
    Also would like to know if you are using oracle standard search mode i.e result based search / auto customization search ?
    --Keerthi                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to downlaod vednor master data into excel sheet in SAP Application ser

    Hi friends
    I want to download SAP vendor master data into excel sheet and the file should be stored in SAP Application server Location with padding zeros.
    Please help me.
    Thanks

    Hi Ramesh,
    You can download the data into application server using the following code. You will have the vendor details in the internal table. Then you will open a file and transfer the data as follows.
    *   Download internal table to Application server file(Unix)
    DATA: e_file like rlgrap-filename value '/usr/sap/tmp/file.txt'.     
      open dataset e_file for output in text mode.
      lOOP AT it_datatab......
        transfer it_datatab to e_file.
      ENDLOOP.
      close dataset e_file.
    In application server you will have only files and not excel sheets.
    Reward points if useful,
    Aleem.

  • Create a visual web part which get data from excel sheet and import it into sql server database in sharepoint 2010 (development)

    Hi,
    I want to create a visual webpart which will read data from excel sheet and import it in to sql server database.(using sharepoint development)
    I want to do it using visual webpart.
    Please help to solve the issue.
    Thanks in advance!
    Regards
    Rajni

    Hi  Rajni,
    Microsoft.Office.Interop.Excel assembly provides class to read excel file data, in your web part solution, reference the assembly, and following blog contains samples about how to read the excel file data,
    and import it to SQL  database.
    1.Create a Visual Web Part Project:Create
    Visual Web Parts in SharePoint 2010
    2.Read the excel workbook by using SPFile class:
    http://alancejacob.blogspot.in/2012/06/read-data-from-excel-file-and-insert-in.html
    http://stackoverflow.com/questions/14496608/read-excel-file-stored-in-sharepoint-document-library
    3.Export the excel workbook to SQL Server:
    http://www.c-sharpcorner.com/UploadFile/99bb20/import-excel-data-to-sql-server-in-Asp-Net/
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Facing problem in writing data to excel sheet using ActiveX

    Hi.
    I want to write data from a one dimesional array to a particular excel sheet in a particular row.Please see the attached vi for explantion.
    It is giving error.But If I give a new file name when the appliation is getting closed it is writing data to the new excel file.
    Please help.
    Thanks in advance
    Attachments:
    Excel sheetWrite.vi ‏90 KB

    Thanks Jhoskin and Rudi .......
    I am able to write data to excel sheet now. I am attaching one"test.zip" file that contains a VI named "Squence.vi "that contains another subVI named "Write U94006 Table To XL.vi"which does the functionality of counting the number of rows in the excel sheet and writing data in the next blank row. I am using the same subVI in the VI named "Sequence.vi"two times so it is taking a lot of time in opening and closing the excel sheet. Will you please suggest some way of calling the subVI only one time.
    Rikki
    Attachments:
    Test.zip ‏105 KB

  • Urgent - Migrate data from Excel sheets

    Hello all..
    I want to move data from excel sheets into oracle9i Database
    I have a bout 50 table with average of 5000 row per table
    How could I do it
    I will be so obligated if you could detail it for me
    Thanks in advance

    I want to insert data using loader in the table Tablename
    Name Type
    CL_CL_CODE NUMBER(3)
    SUBCL_CODE VARCHAR2(50)
    SUBCL_NAME NUMBER(2)
    P_CODE_LENTH NUMBER(3)
    SCE_NAME VARCHAR2(50)
    I use this statement:
    load data
    infile 'D:\Sqlldr\load.dat'
    replace
    into table subclasses
    FIELDS TERMINATED BY ";" OPTIONALLY ENCLOSED BY '"'
    (CL_CL_CODE,SUBCL_CODE,SUBCL_NAME,P_CODE_LENTH SCE_NAME)
    I need to use default value for the column SCE_NAME,P_CODE_LENTH
    what is the formula for this
    Thanks

  • How to upload datas in excel sheet through BDC

    Hi,
        I know how to upload datas in Text format  through BDC...Suppose even when datas are in .xls format,I saved that file as Text(tab delimited) format...then file become text format and it can be easily uploaded....
        So, I want to know How to upload datas in excel sheet through BDC

    hi,
    try this Example, hope useful to u, assign me point.
    report ZMSV1_BDC_CALL
           no standard page heading line-size 255.
    *include bdcrecx1.
    *parameters: dataset(132) lower case.
       DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
      If it is nessesary to change the data section use the rules:
      1.) Each definition of a field exists of two lines
      2.) The first line shows exactly the comment
          '* data element: ' followed with the data element
          which describes the field.
          If you don't have a data element use the
          comment without a data element name
      3.) The second line shows the fieldname of the
          structure, the fieldname must consist of
          a fieldname and optional the character '_' and
          three numbers and the field length in brackets
      4.) Each field must be type C.
    Generated data section with specific formatting - DO NOT CHANGE  ***
    data: begin of record,
    data element: BUKRS
            BUKRS_001(004),
    data element: KTOKK
            KTOKK_002(004),
    data element: NAME1_GP
            NAME1_003(035),
    data element: SORTL
            SORTL_004(010),
    data element: ORT01_GP
            ORT01_005(035),
    data element: LAND1_GP
            LAND1_006(003),
    data element: SPRAS
            SPRAS_007(002),
    data element: BANKS
            BANKS_01_008(003),
    data element: BANKK
            BANKL_01_009(015),
    data element: BANKN
            BANKN_01_010(018),
          end of record.
    End generated data section ***
    data: itab like record occurs 0 .
    data: it_bdc type bdcdata occurs 0 with header line.
    data: it_msg type bdcmsgcoll occurs 0 with header line.
    parameter p_file type rlgrap-filename default 'c:\vendor.txt' obligatory
    start-of-selection.
    perform open_dataset using p_file.
    perform open_group.
    *perform close_group.
    *perform close_dataset using dataset.
    *&      Form  open_dataset
          text
         -->P_P_FILE  text
    form open_dataset  using    p_p_file.
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      CODEPAGE                      = ' '
      FILENAME                      = p_file
      FILETYPE                      = 'DAT'
      HEADLEN                       = ' '
      LINE_EXIT                     = ' '
      TRUNCLEN                      = ' '
      USER_FORM                     = ' '
      USER_PROG                     = ' '
      DAT_D_FORMAT                  = ' '
    IMPORTING
      FILELENGTH                    =
      TABLES
        data_tab                      = itab
    EXCEPTIONS
      CONVERSION_ERROR              = 1
      FILE_OPEN_ERROR               = 2
      FILE_READ_ERROR               = 3
      INVALID_TYPE                  = 4
      NO_BATCH                      = 5
      UNKNOWN_ERROR                 = 6
      INVALID_TABLE_WIDTH           = 7
      GUI_REFUSE_FILETRANSFER       = 8
      CUSTOMER_ERROR                = 9
      NO_AUTHORITY                  = 10
      OTHERS                        = 11
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endform.                    " open_dataset
    *&      Form  open_group
          text
    -->  p1        text
    <--  p2        text
    form open_group .
    loop at itab into record.
    perform bdc_dynpro      using 'SAPMF02K' '0105'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RF02K-BUKRS'
                                  record-BUKRS_001.
    perform bdc_field       using 'RF02K-KTOKK'
                                  record-KTOKK_002.
    perform bdc_dynpro      using 'SAPMF02K' '0110'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-ORT01'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'LFA1-NAME1'
                                  record-NAME1_003.
    perform bdc_field       using 'LFA1-SORTL'
                                  record-SORTL_004.
    perform bdc_field       using 'LFA1-ORT01'
                                  record-ORT01_005.
    perform bdc_field       using 'LFA1-LAND1'
                                  record-LAND1_006.
    perform bdc_field       using 'LFA1-SPRAS'
                                  record-SPRAS_007.
    perform bdc_dynpro      using 'SAPMF02K' '0120'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0130'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFBK-KOINH(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_field       using 'LFBK-BANKS(01)'
                                  record-BANKS_01_008.
    perform bdc_field       using 'LFBK-BANKL(01)'
                                  record-BANKL_01_009.
    perform bdc_field       using 'LFBK-BANKN(01)'
                                  record-BANKN_01_010.
    perform bdc_dynpro      using 'SAPMF02K' '0130'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFBK-BANKS(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_dynpro      using 'SAPMF02K' '0210'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFB1-AKONT'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0215'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFB1-ZTERM'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0220'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFB5-MAHNA'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPLSPO1' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=YES'.
    call transaction 'FK01' using it_bdc mode 'A' update 'S'
                                 messages into it_msg.
      write:/ sy-subrc.
        perform message_formatwrite.
    refresh it_bdc.
    clear it_bdc.
    endloop.
    endform.                    " open_group
    *&      Form  message_formatwrite
          text
    -->  p1        text
    <--  p2        text
    form message_formatwrite .
    data:l_msg(10).
    loop at it_msg.
    CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
       ID              = SY-MSGID
       LANG            = sy-langu
       NO              = SY-MSGNO
       V1              = SY-MSGV1
       V2              = SY-MSGV2
       V3              = SY-MSGV3
       V4              = SY-MSGV4
    IMPORTING
       MSG             = l_msg
    EXCEPTIONS
       NOT_FOUND       = 1
       OTHERS          = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endloop.
    endform.                    " message_formatwrite
    *&      Form  bdc_dynpro
          text
         -->P_0112   text
         -->P_0113   text
    form bdc_dynpro  using    value(p_0112)
                              value(p_0113).
    it_bdc-program = p_0112.
      it_bdc-dynpro = p_0113.
      it_bdc-dynbegin = 'X'.
      append it_bdc.
      clear it_bdc.
    endform.                    " bdc_dynpro
    *&      Form  bdc_field
          text
         -->P_0117   text
         -->P_0118   text
    form bdc_field  using    value(p_0117)
                             value(p_0118).
    it_bdc-fnam = p_0117.
      it_bdc-fval = p_0118.
      append it_bdc.
      clear it_bdc.
    endform.                    " bdc_field
    Regards
    fareedas

  • Data in Excel sheet

    hi abapers,
    I have extracted data into excel sheet,in which i have field MARD-LGORT. its having values for storage location like 0001,0002 etc.but in excel sheet i get values like 1,2 etc.it truncates leading zeros.but i want zeros in excel sheet also.
    i want this values without setting of excel sheet.
    plz help me.will reward points.
    thanks,
    Twinkal.

    Twinkal,
    Hi
    in that FM there is parameter called 'FILE TYPE'
    pass the value for it as 'DBF'
    it will work.
    data : begin of it_heading occurs 0,
    line(30) type c,
    end of it_heading.
    it_heading-line = 'ABC'.
    append it_headING.
    it_headING-line = 'XYZ'.
    append it_headING.
    call function 'WS_DOWNLOAD'
    exporting
    * BIN_FILESIZE = ' '
    * CODEPAGE = ' '
    filename = p_file
    <b>filetype = 'DBF'</b>
    mode = ' '
    * WK1_N_FORMAT = ' '
    * WK1_N_SIZE = ' '
    * WK1_T_FORMAT = ' '
    * WK1_T_SIZE = ' '
    * COL_SELECT = ' '
    * COL_SELECTMASK = ' '
    * NO_AUTH_CHECK = ' '
    * IMPORTING
    * FILELENGTH =
    tables
    data_tab = it_data
    fieldnames = it_heading
    exceptions
    file_open_error = 1
    file_write_error = 2
    invalid_filesize = 3
    invalid_type = 4
    no_batch = 5
    unknown_error = 6
    invalid_table_width = 7
    gui_refuse_filetransfer = 8
    customer_error = 9
    others = 10
    if sy-subrc eq 0.
    endif.
    Change all the fields not to be truncated, into character type in the internal table and then download it.
    Also use Function Module: CONVERSION_EXIT_ALPHA_INPUT
    Amit.

  • Upload data in excel sheet through BDC

    Dear all,
    How do we upload data in excel sheet through BDC?
    Thanks in advance.
    Regards,
    Sandra.

    Hi,
         The sample code is as given below:
    REPORT  upload_supply_area.
    *include for dispaying icons in error log
    INCLUDE <icon>.
    *Declaration of structure.
    TYPES:BEGIN OF x_struct,
          werks TYPE v_pvbe-werks,          "Plant
          prvbe TYPE v_pvbe-prvbe,          "Supply Area
          pvbtx TYPE v_pvbe-pvbtx,          "Production supply area description
          lgort TYPE v_pvbe-lgort,          "Storage Location
          rgver TYPE v_pvbe-rgver,          "Person responsible for one or more supply areas
          END OF x_struct.
    TYPES:BEGIN OF x_messages,
           msgtyp(1) type c,
           werks TYPE v_pvbe-werks,          "Plant
           prvbe TYPE v_pvbe-prvbe,          "Supply Area
           message(120) type c,
           END OF x_messages.
    DATA: it_messages  TYPE STANDARD TABLE OF x_messages .
    DATA: wa_messages TYPE x_messages.
    DATA:it_msgtab TYPE STANDARD TABLE OF bdcmsgcoll,
         wa_msgtab TYPE bdcmsgcoll.
    *internal table for BDC
    DATA: it_bdcdata TYPE STANDARD TABLE OF bdcdata.
    DATA: wa_bdcdata TYPE bdcdata.
    DATA:it_file TYPE STANDARD TABLE OF x_struct.        "internal table which has same structure as file
    DATA:wa_file TYPE x_struct.                          "work area which has same structure as file
    DATA: it_excel TYPE STANDARD TABLE OF alsmex_tabline,
          wa_excel TYPE alsmex_tabline.
    DATA: x_ctuprms TYPE ctu_params.
    DATA:nodata TYPE c VALUE '/'.
    data:con(50) type c.
    data:con1(50) type c.
    *selection screen
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    *Enter file name on presentation server
    PARAMETERS:  p_file TYPE rlgrap-filename OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK b1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    *Function which enables the user to browse the files on hard disk
      CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
        EXPORTING
          program_name  = syst-repid
          static        = 'X'
        CHANGING
          file_name     = p_file
        EXCEPTIONS
          mask_too_long = 1
          OTHERS        = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    START-OF-SELECTION.
    *Subroutine to upload excel file and read it
      PERFORM upload.
    *Subroutine to upload supply area data
      PERFORM fill.
    *&      Form  bdc_dynpro
          Fill the BDC table
    FORM bdc_dynpro USING program dynpro.                       "#EC *
      CLEAR wa_bdcdata.
      wa_bdcdata-program  = program.
      wa_bdcdata-dynpro   = dynpro.
      wa_bdcdata-dynbegin = 'X'.
      APPEND wa_bdcdata TO it_bdcdata.
    ENDFORM.                    "BDC_DYNPRO
    *&      Form  bdc_field
           Fill the BDC table
    FORM bdc_field USING fnam fval.                             "#EC *
      IF fval <> nodata.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam = fnam.
        wa_bdcdata-fval = fval.
        APPEND wa_bdcdata TO it_bdcdata.                        "#EC
      ENDIF.
    ENDFORM.                    "BDC_FIELD
    *&      Form  collect_messages
          Collect the messages from transaction
    FORM collect_messages .                                     "#EC *
      DATA: w_msg(100).
      LOOP AT it_msgtab INTO wa_msgtab.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            id        = wa_msgtab-msgid
            lang      = wa_msgtab-msgspra
            no        = wa_msgtab-msgnr
            v1        = wa_msgtab-msgv1
            v2        = wa_msgtab-msgv2
          IMPORTING
            msg       = w_msg
          EXCEPTIONS
            not_found = 1
            OTHERS    = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        CONDENSE w_msg.
        CLEAR wa_messages.
        wa_messages-msgtyp = wa_msgtab-msgtyp.
        wa_messages-message = w_msg.
        wa_messages-werks = wa_file-werks.
        wa_messages-prvbe = wa_file-prvbe.
    if wa_messages-message eq 'Formatting error in the field V_PVBE-RGVER; see next message'.
    wa_messages-message = 'Invalid name of the person responsible'.
    endif.
    if wa_messages-message eq 'Formatting error in the field V_PVBE-LGORT; see next message'.
    wa_messages-message = 'Enter the storage location'.
    endif.
        APPEND wa_messages TO it_messages .
      ENDLOOP.
      REFRESH it_msgtab.
    ENDFORM.                    "collect_messages
    *&      Form  write_messages
          Display the messages
    FORM write_messages .
      DELETE ADJACENT DUPLICATES FROM it_messages COMPARING werks prvbe.
      LOOP AT it_messages INTO wa_messages .
        WRITE:/1 sy-vline.
        IF wa_messages-msgtyp = 'S'.
          WRITE: 10 icon_green_light.
        ELSEIF wa_messages-msgtyp = 'E'.
          WRITE: 10 icon_red_light.
        ELSEIF wa_messages-msgtyp = 'W'.
          WRITE: 10 icon_yellow_light.
        ENDIF.
        WRITE: 20 sy-vline.
        WRITE : 30 'Plant-', wa_messages-werks .                "#EC NOTEXT
        WRITE: 48 sy-vline.
        WRITE : 49 'Supply Area-', wa_messages-prvbe .          "#EC NOTEXT
        WRITE: 79 sy-vline.
        WRITE : 80 wa_messages-message .
        WRITE: 180 sy-vline.
        WRITE:/1 sy-vline.
        ULINE 1(180).
      ENDLOOP.
    ENDFORM.                    " write_m
    *&      Form  fill_params
          Processing mode for the transaction
    FORM fill_params .
      x_ctuprms-dismode = 'N'.
      x_ctuprms-updmode = 'A'.
      x_ctuprms-defsize = 'X'.
    ENDFORM.                    "fill_params
    *&      Form  upload
          Upload the excel file and read the data
    FORM upload .
    *Function to upload excel file
      CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
        EXPORTING
          filename                = p_file
          i_begin_col             = 1
          i_begin_row             = 2
          i_end_col               = 5
          i_end_row               = 9999
        TABLES
          intern                  = it_excel
        EXCEPTIONS
          inconsistent_parameters = 1
          upload_ole              = 2
          OTHERS                  = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CLEAR wa_file.
    *Read the file row-wise
      LOOP AT it_excel INTO wa_excel.
        CASE wa_excel-col .
    *Read plant
          WHEN '1'.
            wa_file-werks = wa_excel-value.
    *Read supply area
          WHEN '2'.
            wa_file-prvbe = wa_excel-value.
    *Read decription
          WHEN '3'.
            wa_file-pvbtx = wa_excel-value.
    *Read storage location
          WHEN '4'.
            wa_file-lgort = wa_excel-value.
    *Read Person responsible
          WHEN '5'.
            IF STRLEN( wa_excel-value ) = 1.
              CONCATENATE '00' wa_excel-value INTO con.
              wa_file-rgver = con.
            ELSEIF STRLEN( wa_excel-value ) = 2.
              CONCATENATE '0' wa_excel-value INTO con1.
              wa_file-rgver = con1.
            ELSE.
              wa_file-rgver = wa_excel-value.
            ENDIF.
        ENDCASE.
        AT END OF row.
          CONDENSE:wa_file-werks,wa_file-prvbe,wa_file-pvbtx,wa_file-lgort,wa_file-rgver.
          APPEND wa_file TO it_file.
          CLEAR wa_file.
        ENDAT .
      ENDLOOP.
    ENDFORM.                    " upload
    *&      Form  fill
          Call the transaction 'PK05'
    FORM fill .
    *Upload the data through transaction 'PK05'
      PERFORM fill_params.
      LOOP AT it_file INTO wa_file.
        PERFORM bdc_dynpro      USING 'SAPLSVIX' '0100'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'D0100_FIELD_TAB-LOWER_LIMIT(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=OKAY'.
        PERFORM bdc_dynpro      USING 'SAPL0PK1' '0020'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'V_PVBE-PVBTX(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=NEWL'.
        PERFORM bdc_dynpro      USING 'SAPL0PK1' '0021'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'V_PVBE-RGVER'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'V_PVBE-WERKS'
                                      wa_file-werks.
        PERFORM bdc_field       USING 'V_PVBE-PRVBE'
                                      wa_file-prvbe.
        PERFORM bdc_field       USING 'V_PVBE-PVBTX'
                                      wa_file-pvbtx.
        PERFORM bdc_field       USING 'V_PVBE-LGORT'
                                      wa_file-lgort.
        PERFORM bdc_field       USING 'V_PVBE-RGVER'
                                      wa_file-rgver.
        PERFORM bdc_dynpro      USING 'SAPL0PK1' '0021'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'V_PVBE-WERKS'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=SAVE'.
        PERFORM bdc_field       USING 'V_PVBE-WERKS'
                                      wa_file-werks.
        PERFORM bdc_field       USING 'V_PVBE-PRVBE'
                                      wa_file-prvbe.
        PERFORM bdc_field       USING 'V_PVBE-PVBTX'
                                      wa_file-pvbtx.
        PERFORM bdc_field       USING 'V_PVBE-LGORT'
                                      wa_file-lgort.
        PERFORM bdc_field       USING 'V_PVBE-RGVER'
                                      wa_file-rgver.
        CALL TRANSACTION 'PK05'
                           USING it_bdcdata
                           OPTIONS FROM x_ctuprms
                           MESSAGES INTO it_msgtab.
        REFRESH it_bdcdata.
        PERFORM collect_messages.
        CLEAR wa_file.
      ENDLOOP.
      PERFORM write_messages.
    ENDFORM.                    " fill

  • Update the data into excel sheet .

    Hi Friends..
    If I run the program it want to store the data into  excel sheet(first few lines) , if i run the program again I want to store the next result in the same excel sheet after that data(first time data).
    is it any solution available to store the data in the same excel sheet again again in different row of that excel sheet.
    Thanks
    Gowrishankar

    Hi,
    I am not sure which FM u r using for downloading. The FM GUI_DOWNLOAD will work for your requirement. Set the parameter Append to value 'A'. Every time it will append the data to ur file.
    Check below code.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
      BIN_FILESIZE                  =
        filename                      = l_file
      FILETYPE                      = 'ASC'
       APPEND                        = 'A'
      WRITE_FIELD_SEPARATOR         = ' '
      HEADER                        = '00'
      TRUNC_TRAILING_BLANKS         = ' '
      WRITE_LF                      = 'X'
      COL_SELECT                    = ' '
      COL_SELECT_MASK               = ' '
      DAT_MODE                      = ' '
    IMPORTING
      FILELENGTH                    =
      tables
        data_tab                      = i_tab
    EXCEPTIONS
       FILE_WRITE_ERROR              = 1
       NO_BATCH                      = 2
       GUI_REFUSE_FILETRANSFER       = 3
       INVALID_TYPE                  = 4
       NO_AUTHORITY                  = 5
       UNKNOWN_ERROR                 = 6
       HEADER_NOT_ALLOWED            = 7
       SEPARATOR_NOT_ALLOWED         = 8
       FILESIZE_NOT_ALLOWED          = 9
       HEADER_TOO_LONG               = 10
       DP_ERROR_CREATE               = 11
       DP_ERROR_SEND                 = 12
       DP_ERROR_WRITE                = 13
       UNKNOWN_DP_ERROR              = 14
       ACCESS_DENIED                 = 15
       DP_OUT_OF_MEMORY              = 16
       DISK_FULL                     = 17
       DP_TIMEOUT                    = 18
       FILE_NOT_FOUND                = 19
       DATAPROVIDER_EXCEPTION        = 20
       CONTROL_FLUSH_ERROR           = 21
       OTHERS                        = 22
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Thanks,
    Vinod.

  • Oracle data to EXCEL Sheet.

    Hi friends, I have joined new company, they have asked me to do a procedure in which we have to transfer oracle table data to excel sheet. Can anyone guide me how to do this ?
    Thanks for your support .

    DBA4 wrote:
    Hello,
    Thanks for the reply, but still i am not that clear with the answer. U said about ODBC on client site. My company people use ASP.net as front-end and oracle as back-end. They are developing a customizing web-based ERP for a client. Can you please clarify your answer with some proper steps , that would be appreciated. Thanks .If this is just a one time import from the database into Excel, you will need have the Oracle client installed on the computer (will likely require a custom or Full install since Oracle 10g) to set up an ODBC connection. There is an ODBC administrator application in the Control Panel on the computer. Once set up, use the Microsoft Query Tool in Excel to query the database and bring the result back into Excel. Microsoft's website has examples that show how to set up an ODBC connection, and I think that there are examples in Oracle's documentation also.
    You can also bring the data into Excel without an ODBC connection if you set up a short macro that connects to the database and then displays the information on screen. I have several blog articles that show examples of Excel macros extracting information from an Oracle database here:
    http://hoopercharles.wordpress.com/category/excel/
    Charles Hooper
    Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
    http://hoopercharles.wordpress.com/
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

  • How to read the data in excel sheet

    Dear sir,
    How to read the data in excel sheet when i recieve a data serial communication... ie i have store a data in excel such that
    Cell A       Cell B
       A           Apple 
       B           Ball
       C           Cat
       D           Doll
    when i recieve A from serial communication i have to display Apple, and when i recieve B i have to display Ball and so on.. 

    Hi, 
    I would recommend you to have a look at the VI attached. It makes use of a VI named 'Read from Spreadsheet' to read the row and column data from the tab delimited excel file. The read data is then searched for the Alphabet specified and finally returns you the corresponding string. The test file used to validate the operation of the VI is also attached. 
    Trust this would help you solve the issue. 
    Regards, 
    Sagar G Yadav | Application Engineer | National Instruments
    Attachments:
    read_from_excel.vi ‏10 KB
    Book1.txt ‏1 KB

  • Read data from excel sheet and then perform the required operations.

    Hi all
    I need to write a procedure which can read data from excel sheet.I have excel sheet in which i have to options one is modification and other is addition.so if it reads modification then i need to read the concerned table name then check its availability in pl-sql datbase.If table exists then reading the realated column in that row to fire the querry. The excel sheet is saved in local disk c.
    can anybody help me with this.How i need to start specialy to read the data from excel sheet saved in local disk c.
    Edited by: user13334062 on Jun 30, 2010 3:45 AM

    Hi
    If you can convert the excel to a csv format, then it can be simply query from DB Creating Oracle External Tables. Best part is that you may still change the CSV using EXCEL.
    Following action Points can be adopt;
    *1. Convert Excel File to a csv. File Save as CSV*
    *2. Create Oracle Directory* ( This has to be the location of your excel file )
    SQL> Create directory mydir as 'C:\testdb'; --- "testdb" is the location folder in win for your excel sheet.
    *3. Create the External Table*
    SQL> create table my_ext_tab (
    Field1 Datatype,
    Field2 Datatype,
    Field3 Datatype,
    Field4 Datatype,
    Field5 Datatype
    Organization external
    (type oracle_loader default directory mydir
    access parameters (records delimited by newline fields terminated by ',')
    location ('my_ext_tab.csv'))
    reject limit 100;
    *4. Now you can query the table "my_ext_tab"*
    Select * from "my_ext_tab";
    Please avoid the reformat the data column inside the spreadsheet (CSV).

Maybe you are looking for