If DNS is not enabled during CUCM installation it can't be used later?

Hi all,
seems to me this can't be true but when attended one telepresence class they told me the following:
"It is recommended to install CUCM with DNS enabled even if it will not be used initially. If you do not select the DNS option during installation, you would have to reinstall CUCM to enable it later."
Any comments are appreciated.

Aaron / Chris
I am hoping you guys have done this before and can provde some feedback. I currently do not have the domain name configured for my CUCM 7.1 cluster. Performing a show network eth0 shows:
DNS
Domain : Not configured <-- Not set
Gateway : 10.48.116.1 on Ethernet 0
After a recent upgrade to my companys exchange servers from 2003 to 2010 I noticed I stopped getting RTMT alerts. I took a packet trace from the CUCM publisher and saw in the trace I was getting invalid user ID. THe trace showed the alert from field was RTMT instead of [email protected]. I guess this worked in the 2003 exchange becasue the relay agent only looked at the IP address I was coming from. 2010 requires a domain name.
I found this article and according to the requirements to configure alerts to be sent via e-mail, the Domain name should be configured to properly addressed this request to the SMTP server:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/7_1_2/rtmt/rtconfal.html
Here is were I get nerviouse. When I type the command set network domain company.com I get the WARNING:
Adding/deleting or changing domain name on this server will break database replication. Once you have completed domain modification on all systems that you intend to modify, please reboot all the servers in the cluster. This will ensure that replication keeps working correctly. After the servers have rebooted, please confirm that there are no issues reported on the Cisco Unified Reporting report for Database Replication.
The server will now be rebooted. Do you wish to continue.
So I interpert this as telling me I will have to perform the set network domain command on all 8 of my subscribers and then reboot them?
IF you guys have done this did you have to perform a drop replication and then rebuild the replication? If you have not done this do you know if you have to. Since I have Contact Center Enterprise and Express in my CUCM cluster and we are 24x7 I have to be cautious. When I have had to rebuild replication before it has taken and hour and it was not a good time.
Thanks in advance for any feedback you may be able to provide!

Similar Messages

Dispacher and server0 is not started during NW2004s installation

Hi,
Dispacher and server0 is not started during NW2004s installation. SAPInst is stopped on the step of the 'Start java instance'. SDM is 'running' but dispacher and server0 is 'Starting framwork'. So I configured the some parameters via configtool but I can't solve this probelm. I found the some error logs as the followings.
(22503) Starting local Command:
Command: en.sapMPP_SCS33 pf=/usr/sap/MPP/SYS/profile/MPP_SCS33_spdeai01
listen failed on port/service sapdp33
initialize_global: another instance of the enque server seems to be running. EXIT
***LOG Q01=> MsSInit, MSStart (Msg Server 1 22502) [msxxserv_mt. 1818]
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] load acl file = /usr/sap/MPP/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1]   1 : [10.223.50.15] spdeai01 (HOSTNAME)
[Thr 1]   2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 1]   3 : [10.223.50.215] 10.223.50.215 (NILIST)
[Thr 1]   4 : [10.223.50.115] 10.223.50.115 (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = spdeai01
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to internal port 3933 (3933) ***
[Thr 1] *** HTTP port 8133 state LISTEN ***
[Thr 1] CUSTOMER KEY: >Q0820898445<
[Thr 1] Wed Oct 24 18:28:11 2007
[Thr 1] MsJ2EE_AddLoggedInNode: add node [305110500] into logged in list
[Thr 1] Wed Oct 24 18:28:21 2007
[Thr 1] MsJ2EE_AddLoggedInNode: add node [305110550] into logged in list
Our JDK version is '1.4.2_11' and We are installing on the HA environment.
How can I solve this problem? or What should I check about it?
Best Regards,
David.

Check if the Database serivice is up and running. If this is not so.. you might have to start all over again..!!
VJ

Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.

I'm getting the following error message when attempting to invoke "Find My Mac"
Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.

You have no recovery partition. This is a normal condition if your boot volume is a software RAID, or if you modified the partition table after running Boot Camp Assistant to create a Windows partition. Otherwise, you need to reinstall OS X in order to add a recovery partition.
If you don't have a current backup, you need to back up before you do anything else.
You have several options for reinstalling.
1. If you have access to a local, unencrypted Time Machine backup volume, and if that volume has a backup of a Mac (not necessarily this one) that was running the same major version of OS X and did have a Recovery partition, then you can boot from the Time Machine volume into Recovery by holding down the option key at the startup chime. Encrypted Time Machine volumes are not bootable, nor are network backups.
2. If your Mac shipped with OS X 10.7 or later preinstalled, or if it's one of the computers that can be upgraded to use OS X Internet Recovery, you may be able to netboot from an Apple server by holding down the key combination option-R at the startup chime. Release the keys when you see a spinning globe.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
3. Use Recovery Disk Assistant (RDA) on another Mac running the same major version of OS X as yours to create a bootable USB device. Boot your Mac from the device by holding down the option key at startup.Warning: All existing data on the USB device will be erased when you use RDA.
Once you've booted into Recovery, the OS X Utilities screen will appear. Follow the prompts to reinstall OS X. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
If none of the above choices is open to you, then you'll have to start over from an OS X 10.6.8 installation. There's no need to overwrite your existing boot volume; you can use an external drive. Install 10.6 from the DVD you originally used to upgrade, or that came with the machine. Run Software Update and install all available updates. Log into the App Store with the Apple ID you used to buy 10.7 or later, and download the installer. When you run it, be sure to choose the right drive to install on.

HT204053 hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

Acrobat X Pro not installed during CS6 installation

Hello,
I have done an upgrade from CS5.5 Design Premium to CS6 Desing & Web Premium with a problem that the only program that was not installed was the Acrobat X Pro application.
Steps I have done:
1) Deactivate CS5.5 License
2) Deinstall all CS5.5 applications using Windows 7 system controls for deinstallation of programms
3) Install CS6 and activate licenses
Result:
All applications like Photoshop, Fireworks, Dreamweaver, etc. was installed correctly and running fine.
Only Acrobat X Pro done a rollback and was not installed.
Next Steps:
1) Deinstall Acrobat Reader X
2) Running Acrobat Cleaner Tool
3) Reboot
4) Trying to install Acrobat X Pro
Result: Rollback again. No installation done.
See the following note I get, when I try to start the installation again.
Excuse for the German screenshot.
The hover message means: "Operating system does not meet the system requirements. Service Pack 2 recommended"
An for the other notes you can see in the screenshot the note is: "Operating system does not meet the system requirements. Service Pack 1 recommended"
I'am using Windows 7 Ultimate 64bit with Service Pack 1 (German)
Has anyone have had the same situation, that Acrobat X Pro or an other application out of the CS6 suite done a rollback during the installation?
Best regards
Buckaroo - aka Juergen

If you had CS5.5 DP Acrobat X was already installed.
Bob

Application Icon are not displayed during Clickonce installation in WPF Application

During Clickonce installation of WPF application, Icon File(ico) is not displayed in the start Menu and installed applications list in control panel..
Default icon only gets displayed.
In my project
Already added ico file in the "Icon and Manifest" in Application Properties.
Please answer me how to show Application Icon in the Start Menu as well as in installed applications in control panel

Did you do this:
http://learnwpf.com/post/2012/07/09/Adding-an-Icon-and-File-Association-to-WPF-Clickonce-Applications.aspx
You also set the ico file as the project icon.
Since that's under the Icon and Manifest I guess you did that.
Also
The main window ought to have it's icon set to thee icon.
The main window is the first window you open - which of course may or may not be called MainWindow.
Hope that helps.
Recent Technet articles:
Property List Editing ;
Dynamic XAML

I downloaded Mozilla when I first got my Mac.Is it a better than Safari?I tried Safari and I did not care for it. So can I still use cmd t or cmd n for opening multiple sites?

I downloaded Mozilla firefox when I first got my mac as I did not like safari.Thah being said,which is better? and lastly can I still use cmd t or cmd with firefox for opening multiple sites? Thanks,Ralph

You need to visit this page and learn all about Firefox's awesome features, don't ignore the add-ons, toolbar>customize or persona's they really personalize Firefox.
http://www.mozilla.org/en-US/firefox/central/
Also you need to make sure your browser plugins are current for your whole machine, Safari included.
http://www.mozilla.org/en-US/plugincheck/
I hope one day Apple will make Safari as awesome as Firefox and allow the choice it has, but not today.

JRE not found during 9i installation

Hello guys,
I know this is not the right section to post installation errors. However, this is more of a cofiguration error during the time of setting up Oracle 9i on RHEL 4 enviroment.
I am trying to install Oracle 9i R2 on RHEL 4.. on HP ProLiant DL380 G5
All the rpms and packages seem to be in place, and i dont think that there are any failed dependencies.
I have also downloaded JRE 6 and installed it, it was a .bin file and it got extracted on the desktop itself... However I also installed SDK 6.
But while i want to install oracle 9i after issuing the command ./runInstaller
I recieve this error.
[oracle@ssdcl308 Disk1]$ The Java RunTime Environment was not found at F/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
I fail to understand what F/bin/java stands for.. meaning "F".
There is no partition or drive or any folder with the name F.
However i do see java installed at /usr/local/
This is my .bash_profile
unset USERNAME
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/9.2.0; export ORACLE_HOME
ORACLE_TERM=xterm; export ORACLE_TERM
export NLS_LANG=AMERICAN
export ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export PATH=$PATH:$ORACLE_HOME/bin
ORACLE_OWNER=oracle; export ORACLE_OWNER
ORACLE_SID=ssdcl308; export ORACLE_SID
LD_ASSUME_KERNEL=2.4.19; export LD_ASSUME_KERNEL
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
I am unable to resolve this issue, I will provide more relevant info once asked.
Regards
null

Well i just added
export PATH=$PATH:$ORACLE_HOME/bin:/usr/local:/usr/local/bin:/usr/bin
export JAVA_HOME=/usr/local/java
yet i get the same error.
Am i missing something here??
Is it something to do with the "F" thing at F/usr/local
Message was edited by:
user631485
Message was edited by:
user631485
Message was edited by:
user631485

Server0 do not start during NW2004s installation

Hello friends,
I am doing a installation of NW2004s Dual Stack system with AS abap, AS Java, EP, EP core & BI JAVA.
During phase, install software units, server0 is not coming up. I check in VM, com.sap.portal.fpn.accessservice & sap.com/irj are in status STARTING.
please let me know if you can suggest something.
best regards
ashish

Hi Ashish,
Paste the logs for dev_server0 ,dev_dispatcher and std_server0.
With Regards
Ashutosh Chaturvedi

Acrobat 8.1.2: Adobe PDF not installed during Acrobat installation

The Printer device, Adobe PDF, does not install when an acrobat installation is run on Windows XP 32. No errors are given, the device simply isn't installed.
Help is appreciated, as this is a problem for our software deployment.

>Alternatively, is there any way to install Adobe PDF -AFTER- Acrobat is installed?
No, it's part of the install. You probably need to give many more
details, since for almost everyone, the Adobe PDF printer does just
appear.
Aandi Inston

HT1151 when I connect my macbook pro to a dell projector I find the images are not clear during powerpoint presentation. Can anyone make suggestion to improve this. all the writing is very clear

I have a macbook pro which I purchased last november. It works perfect except the images I have in powerpoint do not get displayed clearly.

What is the model identifier for the MacBook Pro? Do NOT give us the serial number.

HT204085 iCloud Keychain is not enable for Sri Lanka. Can u Please fix this and really appreciated.

Hi. Can u tell me how to set up key chain in iCloud as srilanka is not showing in the country list to configure. This seems to be really useful and Please help me on this.

Hello Shenan, this is only a user to user forum, if you want send Apple feedback then please use one of the channels here: http://www.apple.com/contact/

I can't find home sharing in music on my iPad. It used to be under "more" but it's not there any longer. I can see and use it on my iPhone, just not my iPad. Any suggestions?

I just set up iCloud to sync my iPhone and iPad...it worked fine before.

Try this link
http://support.apple.com/kb/ht4557

J2EE Does Not Start During JAVA Add-In Installation

I'm installing Java Add-In onto ERP 2004 (Windows 2000, Oracle 9.2, Java 2 SDK 1.4.2_08).
The J2EE does not start during the installation. It gives up after some time. java -version shows the correct path.
dev_jcontrol shows the following:
[Thr 2624] Tue Aug 02 09:49:32 2005
[Thr 2624] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 2624] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_08
[Thr 2624] *** ERROR => JStartupIGetJDKInfo: Cannot find Java class file [./JdkDetection_3516.class]. [jstartxxi.c 899]
[Thr 2624] *** ERROR => can't get JDK information (rc=-1) [jstartxxi.c 1096]
[Thr 2624] *** ERROR => node [bootstrap] not found [jstartxx.c 1388]
[Thr 2624] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=-18)
[Thr 2624] JControlCloseProgram: started (exitcode = -18)
[Thr 2624] JControlCloseProgram: good bye... (exitcode=-18)

In that case, do u have multiple versions of JDKs installed ?
Maybe some earlier version is installed too ! In that case there is a program that comes along with the JDK to choose the version of the JDK that needs to be loaded into memory.
We faced this problem when we were doing our stints with JAVA Add-In wherein the system required the newest version of java where as some tool which was installed on the system required the older version.
So we used the java program to select the version to be loaded whenever the operating system tried loading the jdk.

Can not enable web services. printer on the network. default ip not connecting using auto ip

B210 - have tried resetting defaults . default IP address will not connect to network with auto IP had to set IP addrtess manually something similiar to the properties on the verzion hot spot. can not disable web services - never enabled.
no Primary or secondary DNS server. not sure if this is problem. can print ok thru network.
This question was solved.
View Solution.

Hey bobupton!
Try going into the printer's EWS and using Google's public DNS servers (8.8.8.8 and 8.8.4.4). It sounds like you know what you're doing so I skipped a few steps on how to get there but if you need more help with it let me know!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

If DNS is not enabled during CUCM installation it can't be used later?

Similar Messages

Maybe you are looking for