If external HD is connected applications hang under 10.9

I have a G-Technology mirrored RAID 'G-Safe' external hard drive(s) - it's connected FireWire > FireWire to Thunderbolt adapter to my late 2012 27" iMac. It has operated without fault for a year and a half and also on another Mac.
After extenive detective work I have narrowed an issue down to it being connected under 10.9 Mavericks.
Since updating to 10.9 the drive still appears to work fine, however in any application when I go to load or save a file (and the Finder browser appears to pick file/save location) that application hangs and I have to force quit.
The issue dissappears if I switch the G-Safe off.
G-Technology say the issue is definetly with the OS not the drive.
I know there are many post here regarding other issues with external HDs and Mavericks so thought I'd post this with hope a solution can be found.

Dusty,
You have pretty well narrowed down the possibilities...HD ribbon cable or logic board. All I can suggest is a very close examination of the entire ribbon cable, looking for breaks/burns in the traces and any abnormalities with both the male and female connectors. A recent poster had similar issues with an HD that would not mount (I can't recall all the details) and he thought the ribbon cable was good, but finally replaced it and solved the issue. Other than replacing it as the next test, I would guess paying for a diagnosis is the only option.
Even though the HD is not present, do you have the Pismo's Hardware Test CD to run?

Similar Messages

My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

Hi HARISH INDIA,
That is not good but lets see if we can get it back to life. If you can, see if you can put your iPhone into recovery mode and then use iTunes to restore it. If you can get it to restore, it will erase everything off your iPhone. If you have a back up in iTunes or iCloud then you can put that on after the restore is complete. Take a look at the article below for more information.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Take it easy,
-Norm G.

Since upgrade to Windows 8, cannot save .rdp files under the Remote Desktop Connection application on the Desktop

Since I upgraded to Windows 8, I am no longer able to save individual Remote Desktop Connection files as .rdp files. I am talking about the traditional Remote Desktop Connection application on the Desktop that was in previous Windows versions, not the
Remote Desktop App from the Windows 8 store.
When I try to click on the Save button I get "An error occurred while saving to file"
When I try to click on the Save As button I get "Unable to open connection file" with the file address being where I tried to save it with the file name at the end.
Also when I upgraded to Windows 8, my .rdp files disappeared from my Documents folder.
I need to create different .rdp files for different programs that my employees get into on my server. Now I have to hand type all the info each time into the Programs tap on the Remote Desktop Connection window, because I can't save to an
.rdp file.
I like the Remote Desktop App from the Windows store but it won't let me designate specific programs to use using standard dos notation (ie c:\program files\ etc..). It just goes to my server desktop.
I want to promote Windows 8 to my employees but I need either .rdp files for the traditional Remote Desktop Connection or the ability to open specific programs using dos notation in the Windows Store Remote Desktop App.

I know this is an old post but others might still be having the problem. Here's what I did.
Create a new text file and open it in notepad. Copy the below into it and edit for your environment. (IP, screen size).
screen mode id:i:2
desktopwidth:i:1920
desktopheight:i:1080
session bpp:i:24
auto connect:i:0
full address:s:192.168.x.x
compression:i:0
keyboardhook:i:2
audiomode:i:2
redirectdrives:i:1
redirectprinters:i:1
redirectcomports:i:1
redirectsmartcards:i:1
displayconnectionbar:i:1
username:s:USERNAME
domain:s:DOMAIN
alternate shell:s:
shell working directory:s:
disable wallpaper:i:1
disable full window drag:i:1
disable menu anims:i:1
disable themes:i:1
bitmapcachepersistenable:i:1
use multimon:i:0
winposstr:s:0,3,0,0,800,600
audiocapturemode:i:1
videoplaybackmode:i:1
connection type:i:7
networkautodetect:i:1
bandwidthautodetect:i:1
enableworkspacereconnect:i:0
allow font smoothing:i:0
allow desktop com:0
disable cursor setting:i:0
redirectclipboard:i:1
redirectposdevices:i:0
drivestoredirect:s:*
autoreconnection enabled:i:1
authentication level:i:2
prompt for credentials:i:0
negotiate security layer:i:1
remoteapplicationmode:i:0
gatewayhostname:s:
gatewayusagemethod:i:4
gatewaycredentialssource:i:4
gatewayprofileusagemethod:i:0
promptcredentialonce:i:0
gatewaybrokeringtype:i:0
use redirection server name:i:0
rdgiskdcproxy:i:0
kdcproxyname:s:
You don't need to worry too much about what's in here. Save the text file as
filename.rdp then rightclick on the file and select edit. The familiar GUI rdp session editor will open. You can make changes in the GUI and
save or save as a different session.
Hope this helps.

After Effects CS6 and Premiere Pro CS6 Long Startup and Application Hang

Problem:
After Effects and Premiere Pro CS5.5 and CS6 are very slow to start all of a sudden. Around 5 minutes to get to/by the intro dialogue box. For AE, the majority of the time is spent on the "initializing user interface." Then, if I can make a comp, and even a layer inside that comp, it will "Hang" if I attempt to open AE's General preferences for example (no preferences window ever comes up). This "hang" is what the Event Viewer in windows calls it, with the faulting module being afterfx.exe. Premiere is not much different. It makes it to the new project window fast, but after setting project parameters and creating the first sequence, I can't get into the preferences either and the application hangs. It is important to note that if I have another application open, like Chrome or Firefox for example at the time the application hangs, they will freeze as well. As soon as I kill the Afterfx.exe process, they come back to life.
I have read nearly all threads on the subject, and am struggling to find a solution:
Deleted preferences folder under my username's appdata.
Turned off Firewall (network traffic from dynamiclink, qtserver, etc was allowed, but what the hay)
ran windows system file checker/malwarebytes/rkill/rootkit detection.
checked for windows compatibility checkboxes under the file.
Uninstalled Wacom Tablet drivers
Disabled Aero
Started with ctrl-alt-shift to delete pref.
uninstalled video driver and replaced with one 6 months ago.
uninstalled, reinstalled, and tested various quicktime versions back to version 7.69
moved plugins folder
moved opengl's plugin out of the folder temporarily
Disabled all 3rd party codecs (xvid was the only one installed and for months)
reinitialized default directshow filters
checked for adobe font list (none found) and removed any fonts from 1 month ago to present.
used msconfig to selective startup without other applications/services running.
Uninstalled all adobe products, and reinstalled.
I performed all of these in a systematic manner, trying to solve the problem. None have fixed the problem.
So it doesn't seem to be a network issue, a codec issue, a plugin issue, a driver issue, font issue, or conflicting application. Any thoughts?
System Info:
PC Windows 7 pro 64-bit SP1
Core i7 - 960 24GB ram
AMD Radeon 6750 v12.10
Adobe CS6 Master Collection

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Application hangs while trying to create a socket

Hello,
We have a third party application that makes HTTP connections using a old version of HTTPClient. Recently we have run into problems where the application hangs as one thread seems to hang while trying to create a socket (thread dumps show the hang occurs in native code) and other threads end up waiting for this thread as they need to obtain a lock on HTTPClient.HTTPConnection. We found out that HTTPClient was not setting a timeout on the underlying socket (SO_TIMEOUT) and the relevant patch has been implemented in the hope that if the condition arises again the offending thread will be timed out and allow other threads to try and continue.
We will not be able to see if the patch works until Monday and I would like to understand the problem a little better if it fails. My question at what point will the socket timeout starting ticking? As our offending thread is waiting in native code is there a chance that the timeout will not be "active".
Also can anyone provide reasons for an application hanging while trying to create a socket and any suggestions for monitoring or mitigating this problem?
Thanks a lot.
Sun Solaris 5.8
JDK 1.4.1 b02

It looks like our version of the JDK offer a connect method with a timeout value, I think this will do the trick.

DRM Application Hang

Is there any known issue regarding DRM Application Hang?
we are frequently getting application hang error when all the following activities are running concurrently:
-multiple active user connections.
-blender/Automator running as a batch in the background
-web interface communicating with DRM to perform updates/selects.
The only way we are able to resolve this is by a windows server restart, even the console force stop/start does not work(console does not even start on an application hang)
We have the DRM server on a Windows 2003 Terminal server and our Database is Oracle 11g on a unix box. Though we have some timelag due to physical locations of these servers, The performance has been ok which was manageable.
Please let us know if there are any work arounds.
Thanks
S

One thing I have observed was that the blender selections have a significant impact on its performance. If the blender has AllExcl\Val\Vefi selected under Hierarchy settings its takes more time eventually hanging up the system I think the performace is better when we have a selected property blend.
I deal with huge hierarchies like close 200,000 nodes per hierarchy, and working with MDM i have found out that using automator updates works more efficiently than a blender and we have automated all that stuff using batch scripts.
I also remember oracle running a fix for the blender issues we were having and haven't encountered it lately.
TD

Time Capsule can't backup external hard drives connected to it. Got that.

Hello Apple Support Communities! This is my first post. Hope this finds you all well My first year as an Apple user. I bought a 2-Tb TC and am running my first backup to my MacBook as I write this.
Problem statement: TC can't backup external hard drives connected directly to it, but the ones connected to the Macs that are connected wirelessly to it. Duly noted. However, the Spotlight will reindex the hard drives connected to the Mac and that will take hours; the whole backup will take days. Thus, excluding the hard drives at "System Preferences > Spotlight > Privacy tab" will probably help reduce the time of backup, or just ejecting them will do too. That itself has not proven effective coz it's still taking forever (50Gb in 2 days, still going).
Questions:
1) Do I wait until my first backup to my MacBook's internal hard drive is done before I connect my hard drives to my MacBook and attempt another backup? If yes, how do I go about the excessive time Spotlight reindexing takes if I intend to backup my hard drives connected to my MacBook?
2) Is there any other way of speeding up the first-time backup?
*Note: All versions of OS and firmwares are up-to-date. TC is connected to an external wireless router. TC is intended to be used as backup device and / or file server only.
P/S: Apologee if this has already been discussed before, thus, a link to previous discussion thread would highly be appreciated)
- Shook Hashem, Malaysia.

How do I backup the externel hard drives connected to my MB. I was under the impression that that has already been done, because I've read it somewhere in a discussion that said it's done automatically unless I exclude it from a backup, which I didn't. So it's supposed to backup the external hard drivestoo because I had them connected to my MB the entire time during the backups.
By default an external drive is excluded.. the list is odd.. if I plug a drive into the mac.. it immediately is listed as excluded.
This is not the list of included.. this is the list of excluded.. remove it from the excluded list to include it.
It is kind of reverse polish notation in backups.
If I want to enter the Time Machine, should I enter it with the TM turned on or off?
Not sure what the question means. If you use the star wars display and want to recover files then use TM off.. but read up pondini.. how to do restore etc.
http://pondini.org/TM/FAQ.html
15A in particular on the how to use TM.
When do I uplug the ethernet and use the wireless connection instead?
Once you have finished the main backup you can go back to wireless. The incremental backups are mostly very small.

Application hangs while running a report from Forms

Hi all,
I am getting a problem regarding running reports from Oracle forms application for printing in a shared printer at client system. There is no problem when I set the DESTYPE to HTMLCSS or FILE. But when I set it to PRINTER then the application hangs and report server gets busy. Once this problem occurs other reports from other client systems are not generating even if this is a HTMLCSS or FILE type.
The thing is the application has ran successfully for two months. Suddenly from last few days the problem is arising.
Few things that I have noticed:
1) When the application hangs I cheked the Task manager, where the process rwlpr.exe is running. If I manually ends the process there the application comes back with a message 'unable to run report'.
2) I have checked few log files, where I have found few log files whose names end with a job number. The file generates from a succesfully running report shows few steps tht end s with closing the printer. But the file that is generated from an unsuccessfull job stops at the step 'Opening Printer //<machine name>/<printer share name>'.
3) Then finally I have changed the DESTYPE to file and using the HOST command printing the text file to shared printer in dos mode. Its working fine. But often the first problem arises again.
What are the possible resons that may cause this problem.
Looking for your positive response.
Thanks and regards
Sandy

From dos prompt I have used the type commad.
From server machine in dos prompt I have used,
type d:\rep.txt > \\<client machine name>\<printer shared name that is connected to client printer>
from Server machine I have opened a Notepad doc, File >Print >Selected the printer that is in client machine.
This works fine.
Now my code to print a report directly to printer,
V_PRINTERNAME := '\\mmondal\mmondalprn'; -- shared Printer name at Client machine
repid := find_report_object('REP_BANK_MST');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,V_PRINTERNAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'kt30');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no P_ISPOSTED='||:CHK_ISPOSTED);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=kt30','_blank');
ELSE
message('Error when running report');
END IF;
exception when others then
     message(to_char(sqlcode));
This hngs the application. And other requests enqued in job queue does not process. If I cancel the stucked job then other reports complete sucessfully.
Log - rwserver.trc shows the following:
[2011/6/14 4:48:28:437] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 1051
[2011/6/14 4:48:28:484] Debug 50103 (RWCacheItem:addFile): add file 'mmondalprn65558177.txt' for job 1051
[2011/6/14 4:48:28:484] Debug 50103 (RWCache:updateCurrentCapacity): Current cache capacity is 32948731
[2011/6/14 4:48:30:671] Exception 50157 (): Error while sending file to printer \\mmondal\mmondalprn. Exit with error code 1848
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.utility.Utility.newRWException(Utility.java:756)
     at oracle.reports.utility.SOSD.sendPrinter(SOSD.java:128)
     at oracle.reports.server.DesPrint.sendFile(DesPrint.java:102)
     at oracle.reports.server.Destination.send(Destination.java:484)
     at oracle.reports.server.JobObject.distribute(JobObject.java:1582)
     at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2231)
     at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:134)
     at oracle.reports.server._EngineCommImplBase._invoke(_EngineCommImplBase.java:94)
     at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
     at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
     at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
     at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
[2011/6/14 4:48:30:671] State 56016 (JobManager:updateJobStatus): Job 1051 status is: Executed successfully but there were some errors when distribute the output
REP-50159: Executed successfully but there were some errors when distribute the output
[2011/6/14 4:48:30:671] Debug 50103 (JobManager:notifyWaitingJobs): Master job 1051 notify its duplicated jobs.
[2011/6/14 4:48:30:671] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 1051
[2011/6/14 4:48:30:671] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 1
[2011/6/14 4:48:30:671] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Ready
[2011/6/14 4:48:30:671] Exception 50159 (): Executed successfully but there were some errors when distribute the output
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1009)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1779)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:1045)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1280)
     at oracle.reports.server._ConnectionImplBase._invoke(_ConnectionImplBase.java:401)
     at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
     at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
     at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
     at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
[2011/6/14 4:48:30:671] Debug 50103 (JobManager:runJobInEngine): Encounted exception in job 1051
[2011/6/14 4:48:30:671] Debug 50103 (ConnectionImpl:runJob): jobid = 1051 Failed with exceptionoracle.reports.RWException: IDL:oracle/reports/RWException:1.0
[2011/6/14 4:48:30:671] Exception 50159 (): Executed successfully but there were some errors when distribute the output
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1009)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1779)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:1045)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1280)
     at oracle.reports.server._ConnectionImplBase._invoke(_ConnectionImplBase.java:401)
     at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
     at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
     at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
     at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
[2011/6/14 4:48:30:703] Info 56013 (ConnectionManager:release): Connection 196 is released
[2011/6/14 4:48:30:703] Info 56013 (ConnectionManager:release): Connection 197 is released
[2011/6/14 4:48:31:31] Debug 50103 (JobManager:removeJob): will remove job 51
[2011/6/14 4:48:31:31] Debug 50103 (RWCache:deleteItem): delete item for job 51
[2011/6/14 4:48:31:31] Debug 50103 (RWCacheItem:clear): job 51 become invalid
[2011/6/14 4:48:31:31] Debug 50103 (RWCache:updateCurrentCapacity): Current cache capacity is 32942484
[2011/6/14 4:48:31:46] Debug 50103 (JobManager:removeJob): removed job 51
[2011/6/14 4:48:47:906] Info 56013 (ConnectionManager:release): Connection 198 is released
[2011/6/14 4:48:51:890] Info 56013 (ConnectionManager:release): Connection 199 is released
[2011/6/14 4:50:48:437] Info 56013 (ConnectionManager:release): Connection 200 is released
Most of the time when all the instances are restarted then for the first time it runs successfully.
The above code worked fine for Last two months.

Can I have an iTunes Library on an external HD, and have it appear under 'Shared' so I can use two library's at once?

Hey guys, here's a weird one - I have a large library on my macbook for my DJ music. Now I want to convert all my old albums to AIFF for listening purposes, and not DJing, so I don't want to cram them all into the lappy HD.
I have a NAS, which shows up as a 'Shared' Library. Can I create a library on an external Thunderbolt portable HD and have it do the same? Or will that only work on Network HD's.
I know the trick to hold Option and select your library at startup for multiple librarys, however I want to use them both at once.
Any ideas?
Cheers!

Thanks for the reply.
Basically, I want to plug in an external HD, and have it appear under 'Shared' Libraries, just like what happens when I'm connected to my NAS Server. If this is possible, of course.
See pic below.

Windows 8 and Canvio Desk 3TB: System will not boot when external hdd is connected

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-e-g/HP-PAVILION-A6109N-amp-windows-8-System-w...
Hi,
just recently upgraded to Win Pro on my HP PAVILION A6109N. I also bought a toshiba canvio desk 3TB. What I notice is that if I reboot my pc with the extermnal HDD connected, my system will not boot.
I have check my BIOS boot settings and the order of the boot.
I have tried disabling USB Legacy Support in the BIOS
I have reformatted the external HDD
but still my desktop will not boot if the external HDD is connected....If I disconnect the external HDD...the system will boot up ....
I am at a loss....*** scratching my head ***

Update: The only solution for me was to format the drive as ext3 and plug it into one of my Asus RT-N66U USB ports, as most routers don’t yet recognize 3TB drives as NTFS. It’s not much help to people who don’t have a router with this capability, and it also slows transfer rates to ~12MB/s.
Given the short length of the cable, your only other options are to have the 3TB Canvio sitting right next to you so you can unplug from a front USB port before each boot, or place it towards the rear of your desk and crawl under the desk to disconnect it from your PC prior to each boot.
It's a pity because Toshiba produce great internal HDD's, but my experience when it comes to external drives is they're simply junk. I wish I had read the reviews before purchasing.

My iMac won't recognize my external hard drive connected by FireWire 400

I have an external hard drive connected to my Intel-based iMac through a FireWire 400 cable. The drive doesn't come up on the desktop after turning on the hard drive power.
If I connect through the USB cable, it appears quickly on the desktop. Why isn't this working through FireWire? I had some trouble with this in Tiger as well, but was somehow able to get it to work.

The drive does not appear in Disk Utility.
And I don't think I'll be installing DiskWarrior until Leopards countless bugs are fixed, especially after reading THIS:
Alsoft: There are some DiskWarrior "compatibility issues" with Leopard
After previously stating "you can run the (current version of DiskWarrior under Leopard) knowing no harm will come to the hard drive or to your data," Alsoft has now posted a message to its Web site stating "there are some compatibility issues when running an installed copy of DiskWarrior 4.0 while started up from Mac OS X 10.5 Leopard. Alsoft currently recommends that you do not run DiskWarrior 4.0 while the computer is started from Mac OS X 10.5 Leopard."
http://www.macfixit.com/article.php?story=20071026153956503

Simple J2EE application fails under activation

Hi,
I have a simple J2EE application which contains one Servlet.
I have two DCs: SSORedirector (Enterprise application project) and SSORedirectWebModuleWebModule (Web Module)
(there is a third DC which is a child DC to SSORedirector, but I don't think it causes any problems)
The web module has by default public part called war (an I haven't touched this).
The Enterprise application project I have addeed the required references to the web module in the application.xml(this automatically set a Used DC reference).
When right-clicking the enterprise application and selecting build, it builds a correct ear file, and if I deploy it to my local workplace installation, the J2EE application works as expected.
However, when I try to check in and activate the activity the SDM deployment fails with the message: Info:java.lang.RuntimeException: Incorrect EAR file. EAR /usr/sap/ED2/JC00/SDM/root/origin/bouvet.com/SSORedirector/JDI_ZEPSSO_D/8596/bouvet.com_PASSTHROUGH_SSO_1_default_bouvet.com_SSORedirector_200602161842250637.sda does not contain entry META-INF/application.xml as required by the J2EE specification.
I've retrieved the .sda file on the file system (shouldn't it be an .ear file) and it contains the application.xml under the folder meta-inf. The complete contents of the sda file is
./d1c66970ddbec7e6ffcc4d01c4705600.HASH
./META-INF/application-j2ee-engine.xml
./META-INF/application.xml
./META-INF/MANIFEST.MF
./META-INF/SAP_MANIFEST.MF
./META-INF/sda-dd.xml
./src/java/src.zip
./bouvet.com~SSORedirectorServlets.war
What could possibly be wrong?
Below are some logs.
<b>Deployment log</b>
SAP Change Management Service
System sapJDI.st.bouvet.no
Build space JDI_ZEPSSO_D
Request 8554
Step Deployment
Log /sapmnt/JDI/global/TCS/LOG/JDI_ZEPSSO_D2006021618420025.log
Info:deploy every archive associated to the buildspace: JDI_ZEPSSO_D
Info:getting DC SSORedirector from CBS for buildspace: JDI_ZEPSSO_D
Info:archive /sapmnt/JDI/global/TCS/DEPLOYARCHIVES/bouvet.com_PASSTHROUGH_SSO_1_default_bouvet.com_SSORedirector_200602161842250637.sda for DC SSORedirector was transfered
Info:Start deployment:
Info:The following archives will be deployed (on http://sapED2.st.bouvet.no:50018)
Info:/sapmnt/JDI/global/TCS/DEPLOYARCHIVES/bouvet.com_PASSTHROUGH_SSO_1_default_bouvet.com_SSORedirector_200602161842250637.sda
Info:SDM log:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:Feb 16, 2006 7:39:58 PM Info: -
Starting deployment -
Info:Feb 16, 2006 7:40:01 PM Info: Loading selected archives...
Info:Feb 16, 2006 7:40:01 PM Info: Loading archive '/usr/sap/ED2/JC00/SDM/program/temp/bouvet.com_PASSTHROUGH_SSO_1_default_bouvet.com_SSORedirector_200602161842250637.sda'
Info:Feb 16, 2006 7:40:11 PM Info: Selected archives successfully loaded.
Info:Feb 16, 2006 7:40:11 PM Info: Actions per selected component:
Info:Feb 16, 2006 7:40:11 PM Info: Update: Selected development component 'SSORedirector'/'bouvet.com'/'JDI_ZEPSSO_D'/'8596' updates currently deployed development component 'SSORedirector'/'bouvet.com'/'JDI_ZEPSSO_D'/'8590'.
Info:Feb 16, 2006 7:40:14 PM Info: The deployment prerequisites finished withtout any errors.
Info:Feb 16, 2006 7:40:14 PM Info: Saved current Engine state.
Info:Feb 16, 2006 7:40:15 PM Info: Error handling strategy: OnErrorSkipDepending
Info:Feb 16, 2006 7:40:15 PM Info: Update strategy: UpdateAllVersions
Info:Feb 16, 2006 7:40:15 PM Info: Starting: Update: Selected development component 'SSORedirector'/'bouvet.com'/'JDI_ZEPSSO_D'/'8596' updates currently deployed development component 'SSORedirector'/'bouvet.com'/'JDI_ZEPSSO_D'/'8590'.
Info:Feb 16, 2006 7:40:15 PM Info: SDA to be deployed: /usr/sap/ED2/JC00/SDM/root/origin/bouvet.com/SSORedirector/JDI_ZEPSSO_D/8596/bouvet.com_PASSTHROUGH_SSO_1_default_bouvet.com_SSORedirector_200602161842250637.sda
Info:Feb 16, 2006 7:40:15 PM Info: Software type of SDA: J2EE
Info:Feb 16, 2006 7:40:15 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Info:Feb 16, 2006 7:40:15 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Info:Feb 16, 2006 7:40:15 PM Error: Aborted: development component 'SSORedirector'/'bouvet.com'/'JDI_ZEPSSO_D'/'8596':
Info:Caught exception during access of archive "/usr/sap/ED2/JC00/SDM/root/origin/bouvet.com/SSORedirector/JDI_ZEPSSO_D/8596/bouvet.com_PASSTHROUGH_SSO_1_default_bouvet.com_SSORedirector_200602161842250637.sda":
Info:java.lang.RuntimeException: Incorrect EAR file. EAR /usr/sap/ED2/JC00/SDM/root/origin/bouvet.com/SSORedirector/JDI_ZEPSSO_D/8596/bouvet.com_PASSTHROUGH_SSO_1_default_bouvet.com_SSORedirector_200602161842250637.sda does not contain entry META-INF/application.xml as required by the J2EE specification.
Info: (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).null)
Info:Feb 16, 2006 7:40:26 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Info:Feb 16, 2006 7:40:27 PM Error: -
At least one of the Deployments failed -
Info:end of log received from SDM
Info:End deployment:
Info:deploy finished for SSORedirector (8554) with rc=12
Info:deployment finished for buildspace: JDI_ZEPSSO_D
<b>CBS log</b>
CBS Request Log - [ 8554/JDI_ZEPSSO_D ]
sapjdi.st.bouvet.no SAP Component Build Server
Build number assigned: 8596
Change request state from QUEUED to PROCESSING
ACTIVATION request in Build Space "JDI_ZEPSSO_D" at Node ID: 37,956,050
     [id: 8,554; parentID: 0; type: 4]
     [options: NO OPTIONS]
REQUEST PROCESSING started at 2006-02-16 18:41:35.949 GMT
===== Pre-Processing =====
List of activities to be activated:
     1 activity in compartment "bouvet.com_PASSTHROUGH_SSO_1"
          C049689.6 - Passthrough SSO
               [seq. no 17][created by 433937 at 2006-02-16 19:41:49.0][ID 44ed44bc9f1911daae5b0012799e50b6]
Analyse activities... started at 2006-02-16 18:41:35.967 GMT
     Synchronizing component "bouvet.com/SSORedirector" from repository... finished at 2006-02-16 18:41:37.129 GMT and took 1 s 10 ms
          Component "bouvet.com/SSORedirector" is to be CHANGED by this activation.
     Synchronizing component "bouvet.com/SSORedirectWebModule" from repository... finished at 2006-02-16 18:41:37.933 GMT and took 802 ms
          Component "bouvet.com/SSORedirectWebModule" is to be CHANGED by this activation.
     Synchronizing component "bouvet.com/SSORedirectorServlets" from repository... finished at 2006-02-16 18:41:39.144 GMT and took 1 s 211 ms
     3 components to be build in compartment "bouvet.com_PASSTHROUGH_SSO_1"
Analyse activities... finished at 2006-02-16 18:41:39.202 GMT and took 3 s 235 ms
Calculate all combinations of components and variants to be built...
     "bouvet.com/SSORedirector" variant "default"
     "bouvet.com/SSORedirectorServlets" variant "default"
     "bouvet.com/SSORedirectWebModule" variant "default"
Prepare build environment in the file system... started at 2006-02-16 18:41:39.410 GMT
     Synchronize development configuration... finished at 2006-02-16 18:41:39.430 GMT and took 20 ms
     Synchronize component definitions... finished at 2006-02-16 18:41:39.469 GMT and took 38 ms
     Synchronize sources...
     Synchronize sources... finished at 2006-02-16 18:41:40.891 GMT and took 1 s 422 ms
     Synchronize used libraries...
          public part "war" of component "bouvet.com/SSORedirectWebModule" ... OK
               [PP "war" of DC 381 variant "default"][SC 142][last successfull build: 0]
          public part "default" of component "sap.com/ejb20" ... OK
               [PP "default" of DC 128 variant "default"][SC 139][last successfull build: 8020]
          public part "default" of component "sap.com/jdbc20" ... OK
               [PP "default" of DC 145 variant "default"][SC 139][last successfull build: 8020]
          public part "default" of component "sap.com/jms" ... OK
               [PP "default" of DC 147 variant "default"][SC 139][last successfull build: 8020]
          public part "default" of component "sap.com/servlet" ... OK
               [PP "default" of DC 166 variant "default"][SC 139][last successfull build: 8020]
          public part "default" of component "sap.com/ejb20" ... OK
               [PP "default" of DC 128 variant "default"][SC 139][last successfull build: 8020]
          public part "default" of component "sap.com/jdbc20" ... OK
               [PP "default" of DC 145 variant "default"][SC 139][last successfull build: 8020]
          public part "default" of component "sap.com/jms" ... OK
               [PP "default" of DC 147 variant "default"][SC 139][last successfull build: 8020]
          public part "default" of component "sap.com/servlet" ... OK
               [PP "default" of DC 166 variant "default"][SC 139][last successfull build: 8020]
     Synchronize used libraries... finished at 2006-02-16 18:41:43.712 GMT and took 2 s 820 ms
Prepare build environment in the file system... finished at 2006-02-16 18:41:43.712 GMT and took 4 s 302 ms
===== Pre-Processing ===== finished at 2006-02-16 18:41:43.713 GMT and took 7 s 755 ms
===== Processing =====
BUILD DCs
     "bouvet.com/SSORedirectorServlets" in variant "default"
          Public Part "war" has been changed. Dependent components will be marked as DIRTY and re-built later.
          The build was SUCCESSFUL. Archives have been created.
     "bouvet.com/SSORedirectWebModule" in variant "default"
          Public Part "war" has been changed. Dependent components will be marked as DIRTY and re-built later.
          The build was SUCCESSFUL. Archives have been created.
     "bouvet.com/SSORedirector" in variant "default"
          The build was SUCCESSFUL. Archives have been created.
===== Processing ===== finished at 2006-02-16 18:41:56.154 GMT and took 12 s 436 ms
===== Post-Processing =====
Check whether build was successful for all required variants...
     "bouvet.com/SSORedirectorServlets" in variant "default"   OK
     "bouvet.com/SSORedirectWebModule" in variant "default"   OK
     "bouvet.com/SSORedirector" in variant "default"   OK
Update component metadata...
     "bouvet.com/SSORedirector" has been CHANGED
     "bouvet.com/SSORedirectWebModule" has been ACTIVATED
STORE build results...
     "bouvet.com/SSORedirectorServlets": store meta-data
     "bouvet.com/SSORedirectorServlets" in "default" variant is PROCESSED
     "bouvet.com/SSORedirectWebModule": store meta-data
     "bouvet.com/SSORedirectWebModule" in "default" variant is PROCESSED
     "bouvet.com/SSORedirector": store meta-data
     "bouvet.com/SSORedirector" in "default" variant is PROCESSED
Change request state from PROCESSING to SUCCEEDED
Analyse effect of applied changes to buildspace state... started at 2006-02-16 18:41:56.364 GMT
Handle Cycles...
     No cycles detected.
Determine components that have become DIRTY due to the results of this request...
     No such components have been found.
Integrate activities into active workspace(s)...
     Integration of activities in compartment "bouvet.com_PASSTHROUGH_SSO_1" started at 2006-02-16 18:41:56.785 GMT
          "C049689.6 - Passthrough SSO"   OK
     Integration of 1 activities in compartment "bouvet.com_PASSTHROUGH_SSO_1" finished at 2006-02-16 18:42:16.614 GMT and took 19 s 829 ms
Analyse effect of applied changes to buildspace state... finished at 2006-02-16 18:42:16.615 GMT and took 20 s 251 ms
Request SUCCEEDED
===== Post-Processing ===== finished at 2006-02-16 18:42:16.617 GMT and took 20 s 451 ms
REQUEST PROCESSING finished at 2006-02-16 18:42:16.618 GMT and took 40 s 669 ms

Managed to solve it in a obscure way.
I had earlier deployed the .ear file directly from NWDS to our dev system (hadn't installed dev workplace then). By removing the application from the deploy service in visual admin, the import suddenly worked.
Dagfinn

Sleep doesn't work with connected power adapter under Yosemite 10.10.1

Hello everyone!
My MacBook Pro 13" (Mid 2010) doesn't go to sleep, when I close the lid or when I try to activate sleep under the Apple menu. I haven't changed nothing in the system preferences. I already tried the following:
unplugged all USB devices
plugged and unplugged external display
closed all applications (except of Finder of course)
reseted all energy saving preferences
deactivated bluetooth
checked share options (everything is deactivated)
Then I unplugged it from the power supply and after I closed the lid, it went to sleep. Then plugged in power supply again and sleep didn't work.
What could be the problem? Can someone help?

Solution: SMC and PRAM reset.

IE 11 Application Hang. Reason Unknown

IE 11 hangs and stops responding on one of our pages. The page relies heavily on JavaScript and crashes during one particular action the user takes. While running the IE 11 debugger, everything seems to work correctly. It makes it through all the javascript,
but the page doesn't respond.
Also, setting the Document Mode to IE 8-10 or checking Compatability Mode does not solve the issue. IE 11 still crashes. The real versions of IE 8-10 do not crash.
Here is a detailed view of the Application Error:
Log Name: Application
Source: Application Hang
Date: 12/17/2013 3:47:43 PM
Event ID: 1002
Task Category: (101)
Level: Error
Keywords: Classic
User: N/A
Computer: MASHLEYPC
Description:
The program IEXPLORE.EXE version 11.0.9600.16428 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 25e4
Start Time: 01cefb713871723b
Termination Time: 38
Application Path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
Report Id:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Hang" />
<EventID Qualifiers="0">1002</EventID>
<Level>2</Level>
<Task>101</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-17T21:47:43.000000000Z" />
<EventRecordID>51618</EventRecordID>
<Channel>Application</Channel>
<Computer>MASHLEYPC</Computer>
<Security />
</System>
<EventData>
<Data>IEXPLORE.EXE</Data>
<Data>11.0.9600.16428</Data>
<Data>25e4</Data>
<Data>01cefb713871723b</Data>
<Data>38</Data>
<Data>C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE</Data>
<Data>
</Data>
<Binary>55006E006B006E006F0077006E0000000000</Binary>
</EventData>
</Event>
The javascript that runs when the crash occurs (with no errors) is as follows:
function renderObjectiveStrategies(objId,goalId){
try{
if(myRowIndex != null){
var tO = document.getElementById("tblObjectives"+goalId); //Get the table that the current objective is in
var plusRows = 1;
if(doSC){
plusRows = 2;
var r = tO.tBodies[0].insertRow(new Number(myRowIndex)+plusRows); //Insert a row below the current Objective in the tBody
r.setAttribute("id","objStgsRow"+objId);
var c = r.insertCell(0);
c.colSpan = "2";
c.innerHTML = " ";
c = r.insertCell(1);
c.colSpan = "3";
c.className = "cellLeftBorderObj cellBottomBorderObj cellRightBorderObj";
var tS = generateNewTable("tblStrategies"+objId);
createStrategyHeaderRow(tS,goalId,objId);
createStrategyFooterRow(tS,objId);
var lstStgCt = Object.size(myObjStgs);
if(lstStgCt > 0){
for(var i = 0; i<lstStgCt; i++){
createStrategyRow(tS,"ro",tS.rows.length,myObjStgs[i]);
if(doShowNewStrategy){
var stg = getNewStrategyObject(objId);
createStrategyRow(tS,"edit",tS.rows.length-1,stg);
var myOId = new Number(objId);
var exStr = "document.getElementById('txtStgDesc"+myOId+"0').focus();";
//cl(exStr);
setTimeout(exStr,0);
doShowNewStrategy = false;
c.appendChild(tS);
}catch(e){
console.log(e.message);
Any ideas are greatly appreciated!
Thanks,
Matt

Hi Matt,
Event ID 1002 is an generic error event which occurs when application stops responding.
Based on your description, I would like to suggest you try the following to check the issue:
1. Disabling Enhanced Protected Mode
2. Delete your browser history
a. Start Internet Explorer from the desktop.
b. Press Alt to show the menu bar.
c. On the Tools menu, tap or click Internet options.
d. Under Browsing history, click Delete.
e. Select all the applicable check boxes, and then tap or click Delete.
f. Tap or click Exit, and then restart Internet Explorer.
3. Run IE with no add-ons. Click Start -> All Programs -> Accessories -> System Tools -> Internet Explorer (with no add-ons).
4. Reset Internet Explorer settings
http://support.microsoft.com/kb/923737
Please understand that reset Internet Explorer to its default configuration. This step will also disable any add-ons, plug-ins, or toolbars that are installed.
5. Remove any 3rd party anti-virus from your system.
6. Manually check for and install updated drivers in optional updates.
If the issue still occurs, you may consider to perform a system restore on your computer to fix it.
What is System Restore?
http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

TS1717 I cannot get iTunes to automatically launch at startup in Windows 7. I need it to do this so my Apple TV 'finds' my Music Library, which is stored on an external hard-drive, connected to my Windows 7 PC.

I cannot get iTunes to automatically launch at startup in Windows 7. I need it to do this so my Apple TV 'finds' my Music Library, which is stored on an external hard-drive, connected to my Windows 7 PC. Anyone know how I do this? I cannot seem to find anything on Google, which is surprising.
iTunes helper launches OK, but not iTunes itself. Am I being dim?
Thanks

The iTunes application should be installed on the system drive. You may need to repair iTunes to fix that error regarding a missing .exe.
To organize your library properly see Make a split library portable.
If you don't have a working version of the library that can be transformed into a portable shape I have tools and techniques that can repair the broken links.
tt2

If external HD is connected applications hang under 10.9

Similar Messages

Maybe you are looking for