IF Formula in Query Designer for Reporting Master Data?

Hi,
i am trying to realize the following function.
I want to display Master Data characteristics in a Query
The Formla is:
Display Characteristic of InfoObject 1 IF Characterristic of InfoObject 2 equals Characteristic InfoObject 3
thx in advance!
Dominik

Hi,
Comparing the characteristics can be done by using <b>replacement path variable</b>.
Please find the below link about using replacement path variables to compare two date characteristics.
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html
hope this helps.
regards,
Pruthvi R

Similar Messages

Technical name for formula in query designer

Hi,
We have created some formulas in Query Designer.
We tried to assign the technical names to these existing formulas, it goes away as the save button on the top of the pop up is disabled.
Is there a way to assign technical names of the formulas created in the query designer.
Regards,
Charu

Charu Pandey,
Formulas are local, means available for particular queries only. No technical name.
Create Calculated keyfigures instead of formulas..., so you can save with technical names.
To display technical name in query, give discription same as technical name.
Hope it Helps
Srini

Unable to write a formula in query designer

Hi Experts,
while writing a formula in query designer in development system there is an error.
Formula is:
Grand total =1
when i write in the rows it is throwing the sytax error like " General syntax error in formula"
But the same formula has been written in production( this query is not available in development so that i am designing the same query in the development system).
some one give me an idea.
Thanks

Hi,
As i checked with implementation team and they have written the formula it has been assigned like Grand Total = 1.
i.e. Grand Total assign to 1.(But it is not Grand Total == 1).
Thanks for your support.
Thx
Edited by: satya prasad on Apr 27, 2010 7:44 AM

How to use Oracle OAB Fast Formulas in Discoverer-desktop [ for reporting]

Hi,
Can anyone tell me how to use a fast formula in discoverer-desktop [for reporting]. Currently, we have a disco-report that calcuates the 'monthly salary', but we don't want to use that. Instead, we have a custom fast-formula [xx_oab_monthly_salary] which has the conditions and calculations that we need.
I want to use that formula in discoverer-desktop directly and get the monthly-salary.. i.e., someone needs to create a folder under the business area and add it i believe.. the formula internally calls a function.
when i checked about this with my dba - he said, he can add the 'function', but not the formula. and i need to write the calculation part...
does anyone know how to add it...there shud a way right...
i do not have access to the technical-stuff here..
someone said ["you can wrap the FF_EXEC.run_formula call into your own pl/sql function and map this function into the EUL so that the formula can be called from a workbook.", but this talks about pl/sql-do we need pl/sql
for this].
also, someone else said [ some fast formulas need specific contexts to be set. Depending on whether the fast formula below the only fast formula that you want to recreate in Discoverer.
For a single formula, in general my recommendation is to recreate the fast formula instead of using the ff_exec call].
any quick answers greatly appreciate..
thx,

Hi,
That's right you need to develop the pl/sql function outside of Discoverer using a pl/sql tool or just SQL*plus. I haven't an example to hand, but can dig one up if you need it. Once you have the function developed you can map it into the EUL using Discoverer Administrator. It will then be available to Discoverer Desktop/Plus as a database function when creating calculations. So you can then just add the calculation to an existing or new report.
Alternatively, you can build the pl/sql function into a view and load the view into a new folder using Discoverer Admin.
Rod West

How to search in BI 7.1 query designer for the required key figures & chars

Hi All,
Can anyone plz tell me how to search in BI 7.1 query designer for the required key figures & characteristics. I have the query being built on a multiprovider which has many cubes.
So, i have a huge list of key figures and characteristics. I am not able to search for the required one by the name or the technical name.
How can we search and pick the required object from the enormous list of the Mutliprovider in the Bex Query Designer??
Thanks
Phani

There is not a search feature available. You have to do an educated guess under what dimension your infoobject could be and select.

What is the Count function in formula of Query Design?

What is the Count function in formula of Query Design? Could someone gives an example?
Thanks!

Example :
COUNT of
Also, check :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7e58e690-0201-0010-fd85-a2f29a41c7af

See & in query Designer for variable

Hi guys,
When i turn the technical name on in the Query designer, sometimes I see & in front and end of a variable. Sometimes, I dont see them. I was wondering why.

I see & in the query designer for the variables. Sometimes, for the same variable I dont see & sign in front and back.
This is what I have observed which in no way is a complete assesment.
When you have multiple variables on Active hierachy char. and you delete one, you see '&' in the other variables.

How to use LSMW on CRM for bulk master data creation?

Hello Experts,
I need your help to able to use LSMW on CRM for bulk master data creation. Below is described my detailed requirement; -
We have CRM 2007 integrated with SAP ISU (ECC6.0). As per business process all Business Master Data (BP details, Business Agreement details etc) and Technical Master Data (Connection Object, PoD etc.) is created in CRM and then it is replicated in ISU. We are going to start Assembly Test soon. Now we need to have all master data in place. Tool we want to use is LSMW.
Now can you help me right from scratch on how to use LSMW for bulk master data creation in CRM?
Please give me documents / links etc that is relevant.
Regards,
Rohit

Hi,
I have looked into your query.
These are some information which might be useful to you.
What is LSMW?
Legacy System Migration Workbench or LSMW is SAP standard program that can be used to easily load / change master data or transactions in SAP without any programming at all. It can be used to upload data at cutover, such as: open orders, contracts, materials, vendors, stock on hand. It can also be used in a production system to make changes to existing data. Very limited authorization checks are available on the transaction, so the use of it must be very well controlled.
One input file can be used to create all the views of the material master. For all the material types. Even if different views and fields are used for the different materials.
Steps to take
1. Create text file with data to be loaded
2. Set up and run LSMW
The following link will provide good information on LSMW Idoc method:
[http://help.sap.com/saphelp_nw04/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm]
I hope this helps.
Regards,
Venkat

Export and import change document for user master data

Dear Gurus,
I have two queries on change document for user master data:
1. Are there any approaches to export and import change document for user master data?
We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
2. Change document for Role change in QAS
When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
Could you advise this is by SAP design or are there any approaches to record this transported role change in the role change document in QAS?
Thanks
YBY

1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius

For uploading master data(ex:customer data) into sap,

hi
for uploading master data(ex:customer data) into sap,
which methods you prefer? call
transaction/session/lsmw/bapi? why?
Thanks
Rama

Hello,
Check this:
COde:
REPORT zprataptable2
       NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
        i1 TYPE i,
        lifnr LIKE   rf02k-lifnr,
        bukrs LIKE   rf02k-bukrs,
        ekorg LIKE   rf02k-ekorg,
        ktokk LIKE   rf02k-ktokk,
        anred LIKE lfa1-anred,
        name1 LIKE lfa1-name1,
        sortl LIKE lfa1-sortl,
        land1 LIKE lfa1-land1,
        akont LIKE lfb1-akont,
        fdgrv LIKE lfb1-fdgrv,
         waers LIKE lfm1-waers,
        END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
        j1 TYPE i,
        banks LIKE lfbk-banks,
        bankl LIKE lfbk-bankl,
        bankn LIKE lfbk-bankn,
         END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      filename = 'C:\first1.txt'
      filetype = 'DAT'
    TABLES
      data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
   EXPORTING
     filename                      = 'C:\second.txt'
     filetype                      = 'DAT'
    TABLES
      data_tab                      = jtab.
LOOP AT itab.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RF02K-LIFNR'
                                  itab-lifnr.
    PERFORM bdc_field       USING 'RF02K-BUKRS'
                                  itab-bukrs.
    PERFORM bdc_field       USING 'RF02K-EKORG'
                                   itab-ekorg.
    PERFORM bdc_field       USING 'RF02K-KTOKK'
                                   itab-ktokk.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0110'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFA1-LAND1'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'LFA1-ANRED'
                                  itab-anred.
    PERFORM bdc_field       USING 'LFA1-NAME1'
                                  itab-name1.
    PERFORM bdc_field       USING 'LFA1-SORTL'
                                  itab-sortl.
    PERFORM bdc_field       USING 'LFA1-LAND1'
                                  itab-land1.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0120'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFBK-BANKN(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTR'.
    cnt = 0.
    LOOP AT jtab WHERE j1 = itab-i1.
      cnt = cnt + 1.
      CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
      PERFORM bdc_field USING fdt jtab-banks.
      CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
      PERFORM bdc_field USING fdt jtab-bankl.
      CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
      PERFORM bdc_field   USING fdt jtab-bankn.
      IF cnt = 5.
        cnt = 0.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFBK-BANKS(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=P+'.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFBK-BANKN(02)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=ENTR'.
      ENDIF.
    ENDLOOP.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFBK-BANKS(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0210'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFB1-FDGRV'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'LFB1-AKONT'
                                  itab-akont.
    PERFORM bdc_field       USING 'LFB1-FDGRV'
                                  itab-fdgrv.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0215'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFB1-ZTERM'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0220'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFB5-MAHNA'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0310'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFM1-WAERS'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'LFM1-WAERS'
                                  itab-waers.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0320'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RF02K-LIFNR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM bdc_dynpro      USING 'SAPLSPO1' '0300'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=YES'.
    PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1     63190      0001     0001     0001     mr     bal188     b     in     31000     a1     inr
2     63191      0001     0001     0001     mr     bal189     b     in     31000     a1     inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards,
Vasanth

Change pointers for HR master data

Hi I am trying to setup change pointers for HR Master data , in relation to HRMD_A06 idoc , I did all the steps for setting up change pointers.
Transaction bd52 for my reduced IDOC shows 0 entries, When i did the same for customer master data , BD52 had some entries by itself .
I can't produce any HRMD_A06 Idocs , What am i doing wrong? Should the entries in BD52 be added manually for all the fields i need?
Any help is much appriciated.
Sudheer

Hi,
guess it's not necessary to see some entries in bd52 (it's enough to activate in bd53).
Do you have configured RBDMIDOC (otherwise no IDocs will get generated).
Or you run t-code bd21 for testing. Standard way is to run the report RBDMIDOC in a periodic background job.
A good description could be found here (p. 12):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30139fb0-360c-2a10-1e9f-9d5417754983
Regards
Patrick
Edited by: Patrick Koehnen on Aug 12, 2008 3:40 PM

Knowing DataSource, Cube, Query, how to identify Master Data datasource?

Hi,
based on a research on FI-FM at http://help.sap.com/saphelp_nw70/helpdata/en/71/d3143cb1b8be00e10000000a114084/frameset.htm
I saw the flow as: first Query(based on cube 0FIFM_C01), the cube which gets data from 2 datasources (0FI_FM_1 & FI_FM_2) through 2 infosources: 0FI_FM_1 and FI_FM_2.
1. What do I need to install on BI to get this going and in which order?
2. In particular, knowing DataSource, Cube, Query do I figure out the Master Data data I need to get this query functional?
Once you know of the specific master data datasources what do I need to do to get this query functional?
Thanks

Dear Amanda,
Let's clarify your questions.
1.Install the cube and related stuff.
RSA1 -> Business content -> Choose " in data flow before" -> install the Cube
2. For the master data and related hierarchy.
RSA1 -> Find the InfoCube -> Right click, find a option such as "display data model". I am not sure about the exactly description because i am not in front of the SAP system.
you can find all the related InfoObject in the right panel.
It is good if you check all of those master data and load them daily. But it is a big job and sometimes it is not necessary. You can:
1) Clarify the business need. to konw which kinds of fields are "Must" for the end user anlaysis and make a list of that.
2) check the list and most of the master data will load by other moduels. for example, cost center, material, customer ... they are too common that you can expect they are in some process chain and loaded daily basis already.
3) load the master data in your list and no one load it before, or discuss with the ownder of process chain, if you need change the load frequency such as from weekly to daily.
Edited by: Brian Yang on Jul 12, 2009 8:54 PM

Search for BAdi for Customer Master Data (XD01)

Hi experts,
i am looking for a BAdi for Customer Master data (XD01). Can anyone suggest me which one can i use?
thanks in advance.
Regards,
aksh

hi
execute this report
*& Report ZNAGBADI
REPORT ZNAGBADI.
*report zbadi_find .
tables : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode,
p_pgmna like tstc-pgmna .
data wa_tadir type tadir.
start-of-selection.
if not p_tcode is initial.
select single * from tstc where tcode eq p_tcode.
elseif not p_pgmna is initial.
tstc-pgmna = p_pgmna.
endif.
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object in ('SMOD', 'SXSD')
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(105) sy-uline.
format color col_heading intensified on.
Sorting the internal Table
sort jtab by object.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type c.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
loop at jtab into wa_tadir.
at first.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
write:/(105) sy-uline.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
format color col_group intensified on.
write:/1 sy-vline,
2 wf_object2,
105 sy-vline.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
select single modtext into wf_txt
from modsapt
where sprsl = sy-langu
and name = wa_tadir-obj_name.
format color col_normal intensified off.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single text into wf_txt
from sxs_attrt
where sprsl = sy-langu
and exit_name = wa_tadir-obj_name.
format color col_normal intensified on.
endcase.
write:/1 sy-vline,
2 wa_tadir-obj_name hotspot on,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
at end of object.
write : /(105) sy-uline.
endat.
endloop.
write:/(105) sy-uline.
skip.
format color col_total intensified on.
write:/ 'No.of Exits:' , wf_smod.
write:/ 'No.of BADis:' , wf_badi.
else.
format color col_negative intensified on.
write:/(105) 'No userexits or BADis exist'.
endif.
else.
format color col_negative intensified on.
write:/(105) 'Transaction does not exist'.
endif.
at line-selection.
data : wf_object type tadir-object.
clear wf_object.
get cursor field field1.
check field1(8) eq 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
when 'SXSD'.
set parameter id 'EXN' field sy-lisel+1(20).
call transaction 'SE18' and skip first screen.
endcase.
reward for useful answers
regards
Nagesh.Paruchuri

Turning off the text for a master data object

What happens if we turn off the texts for a master data object? (In RSA1, under info objects - double click on info object and go to Master data/texts tab and untick the 'with texts' box). Are there any risks in doing this? Has anyone performed this and run into any issues? Thanks

Hi,
There are no issues in turning off the texts, but if its an object that requires description in the report, say material, plant etc, then you won't have that available as the texts are disabled and not loaded.
Cheers,
Kedar

How to use Add Query Criteria for the MySQL data Base in Netbeans ?

How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
When the Query Criteria is add like
SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
FROM counselors WHERE counselors.counselors_id = ?
when i run this Query in the Query Window
i get a error message Box saying
Query Processing Error Parameter metadata not available for the given statement
if i run the Query with out Query Criteria its working fine.

*I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
The Java codes are:
public void dropDown1_processValueChange(ValueChangeEvent event) {
Object s = this.dropDown1.getSelected();
try {
this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
this.Trip_tabDataProvider1.refresh();
} catch (Exception e) {
this.log("Error: ", e);
this.error("Error: Cannot select user"+e.getMessage());
SQL statement for Trip_tabRowSet:
SELECT ALL Trip_Tab.Trip_Date,
Trip_Tab.User_ID,
Trip_Tab.Destination
FROM Trip_Tab
WHERE Trip_Tab.User_ID = ?
Error messages are shown below:
phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.sql.SQLException: No value specified for parameter 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
Could anybody look into this issue.
Many thanks
Edited by: linqing on Nov 22, 2007 4:48 AM

IF Formula in Query Designer for Reporting Master Data?

Similar Messages

Maybe you are looking for