If-function for more than one cell

Hello friends,
I am looking for an if-function that asks for more than one cell. EG:
=If(A2=True;50;0) were A2 is a marker field. In my table A3, A4 and A5 are markerfields as well. How do I add those cells to my my function. Saying: Is any of A2-A5 true, than say 50 else say 0.
As a second question:
Is there a function that says: If A2 is true give me 50, if A3 is true gimme 40 ... all in one function!?
Thanks a lot for helping me !!
Jimmy

The answer to both is yes you can perform these using functions that exist in Numbers:
1) You can use check boxes for the marker cells then use cells in the next column to translate from check boxes to a numeric value:
e.g. B2 = if(A2=TRUE, 1, 0)
then sum the cells in B2 - B5 and compare to 0. if the sum is greater than zero then one of the check boxes is checked:
2) The question with this request is what if more than one marker is set (again I am assuming you are using check boxes)
I am assuming the A2 take precedence (that is if the checkbox for A2 is checked that the result will be 50 EVEN if A3 is checked)
A1 = IF(A2=TRUE, 50, IF(A3=TRUE, 40, 0))

Similar Messages

Add Suppporting Details for more than one periods at the same time for the same Account in Planning.

As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections.
But can we do that as below:
add supporting details for more than one cells at the same time?
I tried to do that in workspace and smartview, neither is working.(my workspace version 11.1.2.2.300.20)
I wonder if i am not with the right version, because i don't know how to get the below.
Can any one explain?
Thank you.

Hi,
I have tried in Smartview for a simple form where my period dimension was in columns and accounts in rows.
You need to select multiple period and select supporting details, it will show those selected period for which you can add the supporting details.
You can add these details and then submit the data in the form.
Regards,
Sourabh

Can we use same program ID for more than one RFC scenarios

Hi experts,
            I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
      IPRODUCT type standard table of ZPMS initial size 0,
      wa_quote type ZIQMD,
      wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
    I_QUOTE       = iquote          .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
    I_QUOTE       = iquote          .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
    IPRODUCT       = IPRODUCT          .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
    IPRODUCT       = IPRODUCT          .
    COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
              Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.

Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

Function with more than one return value

Hi
Please let me know how to write a function with more than one return value and in what scenario should we go for this option.
Thank you

user12540019 wrote:
Please let me know how to write a function with more than one return value and in what scenario should we go for this option.Yes. And the following is the correct approach (using OUT variables is not!) - you deal with the multiple values as a data structure. This example uses an custom (user-defined) SQL data type as the structure.
SQL> create or replace type TXYcoord is object(
2          x       number,
3          y       number
4 );
5 /
Type created.
SQL>
SQL>
SQL> create or replace function fooCoordinate( someParam number ) return TXYCoord is
2 begin
3          -- doing some kind of calculation using input parameters
4          -- etc..
5
6          -- returning the multiple return values as a proper data structure
7          return(
8                  TXYcoord( 0, 0 )
9          );
10 end;
11 /
Function created.
SQL>
SQL> -- selecting the data structure
SQL> select
2          sysdate,
3          fooCoordinate(123)      as XY
4 from       dual;
SYSDATE             XY(X, Y)
2010-02-01 08:49:23 TXYCOORD(0, 0)
SQL>
SQL> -- selecting the properties/fields of the data structure
SQL> select
2          sysdate,
3          treat( fooCoordinate(123) as TXYcoord).x        as X,
4          treat( fooCoordinate(123) as TXYcoord).y        as Y
5 from       dual;
SYSDATE                      X          Y
2010-02-01 08:49:23          0          0
SQL>

How to create Criterian For more than one table

Hi,
I have one problem how to create criteria for more than one table in that using one criteria hot to get the values from database in that more than onetable for getting these values .Please send me the exampke code.
reagrds,
raghu

Hi,
I don't think its possible to create fieldcatalog for different tables,
but if you want to do so create a dummy table which has all the fields which you want in fieldcatalog.
populate the data from different table to that dummy table
then create fieldcatalog for that table and pass it in the function module...
Regards,
Siddarth

How to handle bdc for more than one transaction?

how to handle bdc for more than one transaction?

Hi srk,
I am providing you with some references below. Hope this prove to be helpful to you.
Method 1:
Use one BDC_OPEN_GROUP
Multiple BDC_INSERT
One BDC_CLOSE_GROUP.
Call function BDC_OPENGROUP.
Build BDC data and call lBDC_INSERT for transaction 1
Build BDC data and call lBDC_INSERT for transaction 2
Build BDC data and call lBDC_INSERT for transaction 3
paas the tcodes to bdc_insert.
call function BDC_CLOSE_GROUP.
Also check this out:
Here we need to record 2 transactions (shdb).
Once completion of the recording. Populate the data into input internal table .
Loop the internal table and process the 2 transactions
like
1. BDC_OPEN_GROUP
2. LOOP AT ITAB
a. Populate first transaction recording data
and pass transaction to the BDC_INSERT_GROUP.
BDC_INSERT_GROUP.
b. Populate second transaction recording data
and pass transaction to the BDC_INSERT_GROUP.
BDC_INSERT_GROUP.
ENDLOOP.
3. BDC_CLOSE_GROUP
the above info can be found at : How to use 2 transactions in BDC?
Also check this out:
Suppose u have created recordings for transactions 'MM01' 'XK01' and 'VA01'.
Then do this:
bdc_open_group.
after this we have to fill the bdcdata structure for one transaction.here 'MM01'.
bdc_insert.
refresh bdcdata.
after this we have to fill the bdcdata structure for one transaction.here 'xk01'.
bdc_insert .
refresh bdcdata.
after this we have to fill the bdcdata structure for one transaction.here 'va01'.
bdc_insert.
bdc_close_group.
Hope these are useful to you.
Please reward if any of the above are useful.
Regards,
Kalyan

Can oracle function return more than one value

Hi All
please answer can oracle function return more than one value
need one schenario
regards

Can any function, irrespective of the language, return multiple values?
OF COURSE NOT!!
So why do you think Oracle will now suddenly do it differently than all other languages? Never mind that it is impossible for a function (a unit/module of code) returning a memory address, to return multiple memory addresses. The machine code that does that, has not been yet been designed/implemented.
I am continually amazed that this question is asked. It is about something so fundamental in almost every single 3rd and 4th generation language... something that is taught right at the start... the definition of what a procedure and what a function is.
Sorry, but I simply cannot pull punches on this subject and smooth it over. There is something fundamentally wrong with your training as a programmer if you have to ask such a question about a function.
And whatever programming skills you build on such a foundation, will be seriously lacking.
I kindly suggest that you get back to the very basics of programming - and review and revisit until you fully understand it. There are no shortcuts in becomming a good programmer.
Message was edited by:
Billy Verreynne

MD04 for more than one plant

HI friends,
My requirement is to have the MD04 screen/data of more than one plant together in one screen for comparision for the planner.
Will it be possible.
Please advise.
Thanks in advance.
AKS

hi
in MD04 u can not view data for more than one plant ..this is a std functionality
Vishal...

Trigger for more than One table

Hi,
is it possible to create a trigger for more than one table?
I need a trigger that fires when anyone of the users updates a special value in one of the DB tables.
this value is in about 8 or 10 tables, or must i create a trigger for each table?
thanx
marcel

You would wrap the functionality required into a packaged procedure and then have a trigger on each of these tables that simply call this packaged procedure.
Yes, you would have one trigger per table.

Creating SQL-Loader script for more than one table at a time

Hi,
I am using OMWB 2.0.2.0.0 with Oracle 8.1.7 and Sybase 11.9.
It looks like I can create SQL-Loader scripts for all the tables
or for one table at a time. If I want to create SQL-Loader
scripts for 5-6 tables, I have to either create script for all
the tables and then delete the unwanted tables or create the
scripts for one table at a time and then merge them.
Is there a simple way to create migration scripts for more than
one but not all tables at a time?
Thanks,
Prashant Rane

No there is no multi-select for creating SQL-Loader scripts.
You can either create them separately or create them all and
then discard the one you do not need.

Perform VENDOR EVALUATION for MORE THAN ONE VENDORS at a time

Hello all,
Please guide for any process where i can perform Vendor Evaluation for MORE THAN ONE vendors AT A TIME.
At my location there are around thousand vendors, which are to be evaluated, and difficult to perform the evaluation process one-by-one.
(ME61/ME62/ME63)
Detailed replies with various possibilities would be highly appreciated.
Thanks & Regards,
Joy Ghosh

The vendor evaluation for some thousand vendors at the same time has already been in SAP long before they developed LSMW. The purpose of LSMW is to load data from a legacy system, of course you can (mis-)use it for a lot other things.
But you should not always use LSMW if you are to lazy to go thru the SAP standard menu to find a transaction like ME6G
There you define a job that runs RM06LBAT report.
You first have to define a selection variant for this report. this can be done in SE38 by entering the report name, select variant, clicking display, then entering a name for the variant and clicking Create.

Setting Equalizer for more than one song at a time

Is there any way to set the equalizer setting for more than one song at a time. For example, if I have a classical music album with 10 songs, can I set the equalizer for "classical" for all 10 songs at once? It's a pain to have to do it for each one individually. I tried using the "shift" key, but to no avail.
Thanks,
Joe The Author

highlight all the songs you want then right click and go to get info. in the options tab at the top there is an equalizer preset option.

Master_detail for more than one record at a time

Hi,
How can i display master_detail records for more than one records at a time, for example, i have two tables A and B , A has username and role and B has username and profile. here i wanted to display 10 users at a time on my 6i form with username, role and profile.
i have created a master-detail relation ship with these tables when i'm executing F8 on blcok A , it displays 10 records on BlockA but, only one at a time on block B, how can i display all corresponding records on block B at a time.
Thanks for your help.Bcj

Thanks Roberts, that was realy informative due to some doubts i would like to confirm my requirements , i have two blocks A and B and each master record has only one detail record. but i wanted to display at least 10 master_detail relationships(records) on the form at a time, i would like to know is it possible to do without creating any table or view for example,
data in table A,
username role
AAA R1
BBB R2
CCC R3
data in table B,
username profile
AAA P1
BBB P2
CCC P3
i wanted to display it on form like below,
username role profile
AAA R1 P1
BBB R2 P2
CCC R3 P3
Also would like to know that how can i select data from dba_users, any restriction is there on forms 6i, i can select it on sqlplus.
Thanks Again, Bcj

[Fwd: Client accessing MBeanHome for more than one domain receives SecurityException]

Fwd'ing to security newsgroup
-------- Original Message --------
Subject: Client accessing MBeanHome for more than one domain receives
SecurityException
Date: 4 Mar 2004 07:27:33 -0800
From: Dinesh Bhat <[email protected]>
Reply-To: Dinesh Bhat <[email protected]>
Organization: BEA NEWS SITE
Newsgroups: weblogic.developer.interest.management
Hi,
When a client accesses MBeans of more than one domains (Weblogic 8.1)
that have
different passwords, it receives a SecurityException. This occurs when
the MBeanHome
for each domain is looked up at initialization and reused for each
request ( to
access MBeans ). The security exception does not occur if the MBeanHome
for each
domain is looked up for each request. On initial review, this behavoir
seems inconsistent.
Looking up the MBeanHome for each request may introduce a significant
overhead.
I am not sure if concurrent lookups would also cause the same problem.
I have read on another post that we can work around this problem by
establishing
a trust relationship between the servers, but this may not be feasible
when one
is monitoring a lot of servers and the overhead of configuration may be
an issue.
I have attached code that can reproduce the problem.
Please advise on the correct approach.
Thanks
Dinesh Bhat
Panacya Inc.
import java.util.ArrayList;
import java.util.Set;
import java.util.HashMap;
import java.util.Iterator;
import java.util.Hashtable;
import javax.management.MBeanServer;
import javax.naming.Context;
import weblogic.jndi.Environment;
import weblogic.management.MBeanHome;
* This class reproduces the Security Exception that is caused when a client tries to access
* MBeans of more than one domain with different weblogic passwords. Here is the stacktrace of the
* exception
* java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
     at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
     at weblogic.management.internal.AdminMBeanHomeImpl_811_WLStub.getDomainName(Unknown Source)
     at WLSecurityTest.getWeblogicInfo(WLSecurityTest.java:140)
     at WLSecurityTest.runTest(WLSecurityTest.java:75)
     at WLSecurityTest.<init>(WLSecurityTest.java:66)
     at WLSecurityTest.main(WLSecurityTest.java:51)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.intellij.rt.execution.application.AppMain.main(Unknown Source)
Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
     at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:682)
     at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:181)
     at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:814)
     at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:299)
     at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:920)
     at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:841)
     at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
     at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
     at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
     at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
* Note: the exception is caused only when the MBeanHome for each domain is cached and used for subsequent
* transactions. The exception does not occur if the MBeanHome for each domain is looked up for each transaction. This
* would significant overhead in practice. Also the transactions across the various domains occurs serially, hence
* the effect of concurrent lookups has to be tested.
* Usage:
* This class has been tested with weblogic 8.1
* The class needs weblogic.jar in its classpath
* One can specify the weblogic details as System properties. The properties need to be specified in
* the following format:
* wls.host.n, wls.userId.n, wls.password.n where n is the weblogix instance number. Also specify
* the boolean system property reconnect.each.iteration to toggle between reconnecting or not reconnecting
* for each iteration. When not reconnecting for each iteration, the MBeanHome is reused and the Security Exception
* occurs.
* Following is the example of system properties
* -Dwls.host.0=localhost:7001 -Dwls.userId.0=weblogic -Dwls.password.0=weblogic
* -Dwls.host.1=localhost:7011 -Dwls.userId.1=weblogic -Dwls.password.1=weblogic1
* -Dwls.host.2=localhost:7021 -Dwls.userId.2=weblogic -Dwls.password.2=weblogic2
* -Dreconnect.each.iteration=false
public class WLSecurityTest
ArrayList wlsDetailsList = new ArrayList();
HashMap connectionMap = new HashMap();
public static void main(String[] args)
try
WLSecurityTest wlSecurityTest = new WLSecurityTest();
catch (Exception e)
e.printStackTrace();
* Constructor
* @throws Exception
public WLSecurityTest() throws Exception
int noOfTries = 10;
getWLSDetails();
for( int i=0; i <= noOfTries; i++)
runTest();
* Runs the test
private void runTest()
for (int i = 0; i < wlsDetailsList.size(); i++)
WLSDetails wlsDetails = (WLSDetails) wlsDetailsList.get(i);
getWeblogicInfo(wlsDetails);
* Get Weblogic details from System properties
* @throws Exception
private void getWLSDetails() throws Exception
wlsDetailsList = new ArrayList();
String hostKeyTmpl = "wls.host";
String userIdKeyTmpl = "wls.userId";
String passwordKeyTmpl = "wls.password";
boolean done = false;
for (int i = 0; !done; i++)
WLSDetails wlsDetails = new WLSDetails();
String hostKey = hostKeyTmpl + "." + Integer.toString(i);
String userIdKey = userIdKeyTmpl + "." + Integer.toString(i);
String passwordKey = passwordKeyTmpl + "." + Integer.toString(i);
wlsDetails.hostName = System.getProperty(hostKey);
done = (wlsDetails.hostName == null) || (wlsDetails.hostName.length() == 0);
if (!done)
wlsDetails.userId = System.getProperty(userIdKey);
wlsDetails.password = System.getProperty(passwordKey);
connect(wlsDetails);
wlsDetailsList.add(wlsDetails);
* Lookup the MBeanHome for the specified weblogic server
* @param wlsDetails
* @throws Exception
public synchronized void connect(WLSecurityTest.WLSDetails wlsDetails) throws Exception
Context ctx = null;
MBeanHome mbHomeLocal = null;
try
Environment env = new Environment();
env.setProviderUrl("t3://" + wlsDetails.hostName);
env.setSecurityPrincipal(wlsDetails.userId);
env.setSecurityCredentials(wlsDetails.password);
Hashtable hashtable = env.getProperties();
System.out.println(hashtable.toString());
ctx = env.getInitialContext();
wlsDetails._mBeanHome = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
catch (Exception e)
e.printStackTrace();
* Gets weblogic information using MBeans
* @param wlsDetails
public synchronized void getWeblogicInfo(WLSDetails wlsDetails)
try
boolean reconnectEachIteration =
Boolean.getBoolean("reconnect.each.iteration");
if( (reconnectEachIteration) || ((wlsDetails._mBeanHome == null) && (!reconnectEachIteration) ))
connect(wlsDetails);
MBeanHome mbHomeLocal = wlsDetails._mBeanHome;
String domainName = mbHomeLocal.getDomainName();
Set allMBeans = mbHomeLocal.getAllMBeans();
System.out.println("Size: " + allMBeans.size());
Set clusterMBeans = mbHomeLocal.getMBeansByType("Cluster", domainName);
System.out.println(clusterMBeans);
MBeanServer mBeanServer = mbHomeLocal.getMBeanServer();
catch (Exception ex)
ex.printStackTrace();
* Class that holds weblogic server details
class WLSDetails
String hostName = "";
String userId = "";
String password = "";
MBeanHome _mBeanHome = null;

If Server version is 61.
Make user "system" password of all weblogic servers same.
If Server version above 61(70,81)
In the Security Advanced Settings un check generated credential and specify a common credentail for all the weblogic servers(domains).

If-function for more than one cell

Similar Messages

Maybe you are looking for