If I accidently open a 2nd session of firefox resulting in two open windows when I close one window they both close and I lose my tab groups. How can I close just one of the two windows?

I have 3 profiles, one of which I typically use. I have firefox prompt for the profile when it loads. I recently renamed the profiles (earlier this week). So... the profiles do not exactly match the folder names for the profiles.

I don't understand what happened above, but ericn1, wasn't your problem that you tried to close one browser window using the red X, and ALL of them closed? How did any of the above help you solve your problem? jscher2000 gave you alternate methods of closing windows but said that closing a window with the red X "should" work. It doesn't work, because it is closing ALL your windows, not just the one you are clicking on. I am now having the same problem. with Firefox.
Understand I do not have the problem with any other program. In other words, I can open multiple windows in Paint Shop Pro, IE, Notepad, etc. and close one with the red X and all others remain open. It ONLY happens when using the Firefox browser.
The red X should close only the window that you are in when you click on it.
NOW, before someone suggests tabs, I don't like them and don't use them. My choice. Before someone says my browser is out-of-date, (3.6.13) I am using it because it was the last version that worked reliably on my computers, both at home (Windows 7 Professional) and my office (Windows XP Professional).
When I updated to the last Firefox browser, both computers started seizing up (nothing worked and had to reboot using power button) Removing that version of Firefox and going back to this version solved that problem. Fact remains, version has little to do with this problem. I've seen other posts around the net about this with different (newer) versions of Firefox.
So . . . does anyone have a solution to this that doesn't involve using keystrokes or hot keys to close windows instead of the red X that should work properly?

Similar Messages

How can i print just one page of photo book without printing the entire book

how can i print just one page of photo book without printing the entire book

Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits:

How can I Make just one color pop and the rest a black and white photo??

How can I make just one color pop and the rest of the photo black and white?? I'm using iphoto...

3rd party image editors like Photoshop Elements for Mac can do it:
Click to play video screenshot
Or use it to keep an object in color and the rest B/W.
Click to view full size
OT

I visited the USA and bought an Apple iPhone 4 5.1.1, the latest model. I would like to unlock it and use in my country. How can I get it unlocked so the I can use my local micro sim card? What info about it do you need to assist me in unlocking it?

I visited the USA and bought an Apple iPhone 4 5.1.1, the latest model. I would like to unlock it and use in my country. How can I get it unlocked so the I can use my local micro sim card? What info about it do you need to assist me in unlocking it?

Contact the original cellular provider, as they are the only ones that can provide unlocking.

HT1222 I visited the USA and bought an Apple iPhone 4 5.1.1, the latest model. I would like to unlock it and use in my country. How can I get it unlocked so the I can use my local micro sim card? What info about it do you need to assist me in unlocking

I visited the USA and bought an Apple iPhone 4 5.1.1, the latest model. I would like to unlock it and use in my country. How can I get it unlocked so the I can use my local micro sim card? What info about it do you need to assist me in unlocking it?

Sounds like you bought an AT&T no contract phone. You will need to contact AT&T for unlocking but they are only doing so for current and previous account holders. If you have never had service with them they will not unlock your phone.

How can I scale just one dimension of a pic? I need to shrink the width only, to fit the frame.

HELP! How can I shink only one dimension? I need to shrink the width slightly to fit the frame; the program only allows scaling that is proportional, so when I shrink the width the heigh becomes too short. Father Mike

I'd recommend using the rectangular marquee and the crop command. This will crop the image to an exact size without any resampling or distortion. Cropping without constraint can cause distortion...like giving someone a cone head.
Check the size of the image first by either looking in the Image<Resize<Image Size. Make a notation of the height since you don't want to change that in this case. (While you are there, change the resolution to the desired output...make notation of height after this step if you changed the resolution.)
Select the Rectangular Marquee tool. Change the setting in the options bar to "Fixed Size" and input the desired size. (Along with the numbers, specify in this box in what units you desire...px, in, etc.
Drag the marquee to the desired location. (As long as the marquee tool is selected, this selection box can be moved around).
Go up to the menu bar and select Edit<Crop.
Reading material on Image<Resize<Image Size:
http://help.adobe.com/en_US/PhotoshopElements/7.0_Win/WSae2ea3b149d0c3591ae939f103860b3d59 -7ee8.html
Reading material on Crop Command:
http://help.adobe.com/en_US/PhotoshopElements/7.0_Win/WSae2ea3b149d0c3591ae939f103860b3d59 -7eed.html

How can I publish just ONE site

Everytime I create a new site and publish it to a folder (to place in my own domain) iWeb publishes ALL of the sites every time, no matter whether changes have been made to any site or not.
How do I publish just ONE site?
If I get mobile.me, will I be able to publish just the ONE site I wish to publish?
Phil

I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.
OT

How can I publish just one page at a time?

I switched to a new computer, so I moved the domain file. When I open iWeb, all the pages are there. I made one small change, and only want to update the one page, but since it's on a new computer, all the pages are red and I can't publish just one page - every time I try, iWeb tries to publish all the pages, and it errors out every time. Can anyone tell me how to make it publish just one page at time in spite of the fact that all the pages in the sidebar are red? The only reason I can think for the error message is that there's too much content to do it all at once.

Yes. If you are uploading to a server and not MobileMe, then just select the option publish to a local folder.
When you have done this, then use Cyberduck or Transmit and upload just the one page from your site folder to your server, plus it's resultant file. So if you just want to upload a Welcome page for example, use Cyberduck to upload just the Welcome.html page and the Welcome files to your server and into your root folder on your server, which would be either a public_html folder, a www or htdocs folder.

How can i use just icons on the bookmarks toolbar

i would like to see all my bookmarks..so how can i use just the icons, and not the text on my bookmark toolbar?

*Roomy Bookmarks Toolbar: https://addons.mozilla.org/firefox/addon/roomy-bookmarks-toolbar/

When an email contains multiple attachments how can I forward just one of the attachments in a new email?

I am new to IPAD use and need to forward one attachment from an original email that contains multiple attachments - how can I isolate and forward only one of the attachments?

Aha! I have been doing just that. However, what has been tripping me up is that I am also used to clicking the Go Online/Go Offline toggle button on the top menu bar when I manually check for messages on Cox. Apparently when you take one inbox offline, that button switches to Off even though the other inbox is still online. If I just ignore that button and go on or off via the cox mailbox listing, it keeps comcast from being reactivated.
Thanks so much for helping me think this through.
Edited to add: I removed that dang button from my menu so I can stop clicking it.

How can I hide a subvi in the hierarchy window?

I want to hide a subvi of my top level vi in the hierarchy window. I know by calling it dynamically that it won't be in the hierarchy window until it is called but I want to keep it in the hierarchy. I just don't want to display it in the hierarchy window when a user looks at it. Kinda like an easter egg or like the multitude of vi's that NI hides. Can anyone give me a solution?
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor

This is from the 1/14/03 info-labview digest:
Hi, Tim
As you know, to distinguish between public and private methods, GOOP uses the LLB-top-level flag. Public methods are top-level and private method are non-top level.
But GOOP does one more thing with private method VIs. They are checked as "System VI", a property which make them invisible in the VI hierarchy and in the "VIs in Memory" application property, unless their panels are open. You can upgrade to the new GOOP wizard, downloadable from http://www.endevo.com/default.asp?lang=eng. It doesn't check VIs as system VIs. It is compatible backwards, so perhaps you can "repair" your existing GOOP objects if you use the new wizard, but I'm not sure. S
ince you can store objects in both directories and in LLBs with the new wizard, perhaps it helps to convert from LLB to directory and back to LLB again.
If the above doesn't work, you can use these two VIs to uncheck the "System VI" property:
1) C:\PROGRAM\National Instruments\LabVIEW 6\project\goopwiz.llb\Hide System VIs.vi
2) C:\PROGRAM\National Instruments\LabVIEW 6\vi.lib\utility\libraryn.llb\Librarian List.vi
Use (2) to create a list of VIs in your GOOP object LLB. Then loop through all the VIs and use (1) to uncheck the property.
If you want to read more about this, you can search for the string "Invisible VI ?!?" in http://www.searchview.net/, during 2001, in the info-labview archives. Then read the postings with the subject "Invisible VI ?!?".
Hope this was helpful!
Andreas

How can I get just one menu?

Hi,
I hope there is a way to have just one menu, the main menu, and to have two buttons on it: one for one chapter, one for the other, not one for playing the whole movie, one for playing individual chapters. Is there a way to do that? Is there a (simple, straightforward, no frills, non-garish, NO MOTION) theme that has that setup or that can be adapter for that use?
(I currently use Brush Strokes and I have to kill the motion every **-***** time, yet varying amounts of motion ALWAYS appear until I slide the motion duration slider all the way to the right (max) and then back all the way to the left (min/0). (Yes, I have saved a version of that theme with no **** motion but it still appears despite that.) I DO NOT WANT ANY MOTION or sound effects if I am going to use any other theme than Brush Strokes. I can kill the motion and sound but I don't want one that has a garish look or has lots of motion initially.)
Is there a way to use the map to eliminate the second-level menu or makeit the main menu? And if there is, would I be able to add/change the main menu buttons to that they start each chapter, not play the whole movie or play individual chapters?
Thanks so much.
John L

Hi
Not so interested in bad language. Struggling to get my own understandable.
To do what I guess You want, only way I can think of is:
- Make each chapter as a stand alone movie
∆ This by: selecting clips in iMovie that belongs to Chapter one
- Export as Full quality QT.mov BUT - remember to mark - selected clips only
- Now select the rest (or Chapter two) and export this
Now You just drop Your Chapter one and two into a new open iDVD theme
window.
To make iDVD to handle both a full movie and specific Chapters alone has
not been implemented in an easy way - but has to be a double material
project. Which is not so economical. Only alternative in my mind is
DVD-Studio Pro - and this hurts even more "economicaly"
Yours Bengt W

How can you stop slideshow from resizing the browser window iframe ?

Does anyone know where the code is that causes the iweb slideshow to resize the browser window when it is opened?
When it is placed on a page using <iframe src="http://homepage.mac.com/coreydee/slideshow/index.html" width="760" height="580" scrolling="no" style="border:none;" frameborder="0"></iframe> It resizes the browser window when it starts.

Does anyone know where the code is that causes the
iweb slideshow to resize the browser window when it
is opened?
When it is placed on a page using <iframe
src="http://homepage.mac.com/coreydee/slideshow/index.
html" width="760" height="580" scrolling="no"
style="border:none;" frameborder="0"></iframe> It
resizes the browser window when it starts.
The iWeb .Mac slideshow, which you previously tried to add in an iframe, does have a function to resize the window. But it would not cause the whole window to resize, just page within the iframe so you would never know.
However, the autoviewer one you are using should not do this.

How can I transfer JUST ONE IWeb site to another computer?

I am new to making IWeb sites and am now making them for
other people. I have about 10 sites in my IWeb folder and need to
be able to give a person's site to them.
I need to be able to transfer JUST ONE site to another computer.
Right now, I am only able to transfer ALL the sites I have made to
another mac and then, it wipes out all their sites! How can I prevent
the ultimate wipe out of all their iweb sites yet give them JUST ONE
of mine?
thank you in advance,
Beth http://www.yourzensite.com

First, read Wyodor's post about changing the publishing settings HERE.
You can create the extra folders in Home Folder/Library/Application Support/iWeb or, as I do, in a folder named iWeb in the Home folder.
Create a folder for each website, give it a suitable name and paste the Domain.sites2 file with all the websites into each.
Open each one in turn, double click the Domain.sites2 file to launch it in iWeb, delete all the sites except the one whose name is the same as the folder name, save and quit.
Now you can launch any site individually in iWeb and sent a copy of the appropriate folder to the client.

How can I restore just one application from Time Machine?

Hello, I have just one application that is really acting quirky and won't load correctly anymore and I would like to restore that application from Time Machine but am just not sure how to do that. Can someone please walk me through step by step on how to restore just one application. Thank you. Jean
Message was edited by: anokienurse

Before you restore an application from a Time Machine backup it would be wiser to remove the current installed copy then reinstall from the application's original distribution medium - download, CD/DVD, etc. The reason for this is that Time Machine backs up every hour. By now the bad version of this application is now backed up to your Time Machine backup drive. Restoring from the backup won't resolve your problem.
First, uninstall the old program. If the program came with an uninstaller then use it. If not then start by deleting the application from the Applications folder. Then locate all the support files associated with the application and remove them, too. Look for these in:
/Users/yourusername/Library/Preferences
/Users/yourusername/Library/Applications Support
Applications may come with a separate uninstaller program that could also be in your Applications folder. Some applications may install other files in other locations on your computer. If you tell us what the application is we may be able to provide additional help.
You may find more information here: The XLab FAQs. Read the FAQ on uninstalling software.

If I accidently open a 2nd session of firefox resulting in two open windows when I close one window they both close and I lose my tab groups. How can I close just one of the two windows?

Similar Messages

Maybe you are looking for