If I add a cas array to an existing setup, will users continue to work fine until their settings are updated?

I have an existing Exchange setup that never had a CAS array added, I would like to add one and realise the Outlook clients won't pick up the new settings automatically.
But if I add one now, will the Outlooks continue to work fine with their old settings until they are updated to use the new array?
Thanks!

Hi,
In addition to above suggestion, I would like to clarify the following thing:
Once you set the CAS Array FQDN as the RPCClientAccessServer on the mailbox databases with Set-MailboxDatabase, Outlook users will need to create new Outlook profiles or "repair" their profiles to find the CAS Array. However, they will continue to work even
if you don't do that, those Outlook clients will just continue to connect to the single CAS instead of the CAS Array endpoint.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Similar Messages

Add the Ultimate Consigmee in the existing setup.

Dear Folks,
My company planning to add the New Partner Function = Consignee in the existing system or in setup, is there any step by step procedure to add the Ultimate Consigmee in the existing setup.
We already have Sold to, Ship to, Bill to & Payer in the setup.
Please forward me any step by step procedure to add Ultimate Consignee.
Thanks
Kannan

Dear Kannan,
As per your thread Ultimate Consignee means ?
Generally Ultimate Consignee means Who will receive the Goods at the Final.
you can add one more parter function in your Account group..and maintain in SO...
http://www.sap-img.com/sap-sd/partner-determination-for-sales-doc.htm
Regards
raj.

I cant add my gmail account to my ipod touch. It says wrong username or password is incorrect. Or it will say imap.gmail not available.It worked fine until yesterday.

So i cant add my email to my ipod touch. It gives me a message that my username or password for imap.gmail.com is incorrect. I've reset it and still no luck.

Can you log into your Google mail account on a computer? Try that to be sure your email settings are correct.
Also, try this link: https://accounts.google.com/DisplayUnlockCaptcha
Google does inexplicable things from time to time. This may be one of them.

When I add a new song to an existing playlist, will it automatically sync to my iPod once connected to my computer?

When I add a song to an existing playlist on iTunes, will it sync to my iPod once connected?
I'd rather not have to remember each specific playlist I add songs too to sync it to my iPod.
I do have automatic sync set up, starting today because I got tired of constantly manually adding music.
ALSO, if I deleted songs in iTunes, will it delete them in my iPod as well once connected to my computer?

PsychedelicWonders wrote:
When I add a new contact to my actual phone, will it sync, back up and make a file for the new contact in outlook?
iPhoneUser guide, page 8:
"Contacts and calendars are synced
both ways between your computer and iPhone. New entries or changes you make
on iPhone are synced to your computer, and vice versa."
So basically, do they keep each other updated automatically?
Yes, your data will be updated every time you sync.
Or do I have to enable something?
iPhone User guide, page 9:
"The Info pane lets you configure the sync settings for your contacts, calendars, email
accounts, and web browser"
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

AirPort Extreme wireless was working fine until I tried to add the extreme to extend network range...now neither is working and I can't fix.

Help please? I got the Express yesterday and had it set up and working fine. However I found the signal and connection wasn't going far enough/fast enough for all areas of my home I wanted it to. Today I got the Extreme. I unplugged the Express, plugged in the Extreme and set up the new wireless network for that one just fine and it was working great. However, I still wasn't getting quite the connection/speed I wanted through out my house, so I tried to add the Express to extend the network I set up from the Extreme and now neither one is working. I tried resetting and starting over from the beginning but I can't even get just the Extreme to work by itself and am not sure what to do.

The following are the basic steps to configure an extended network with two 802.11n AirPort. Please take a look to check if anything was missed when you configured yours.
Dynamic WDS - Extending a Wireless Network Setup
If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
Open AirPort Utility, and then, select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then, click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then, select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and then, choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then, choose the network you want to extend from the Network Name pop-up menu.
Enter the base station network and base station password if necessary.
Click Update to update the base station with new network settings.
(ref: Pages 43-44 of Apple AirPort Networks.)
(ref: Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations)

HT1386 I have a ipod nano older version and I can't sync my music to the iTunes site to change or delete or add anything to it? What can I do? The iPod works fine and I use when I am at the gym.

I have an older version 1.1.3 iPod nano 4 gig and when I open iTunes I can't view my music list or change or delete any I have on the iPod.
This device works fine and I like to size to use when I excercise. What can I do?

I requested your post be moved to the iPod Nano forum. This is the iPod touch forum.

CAS Array and Outlook anywhere profiles

Hello !
I'm planning to set up a CAS array from an existing CAS server. I red that after changing RpcClientAccessServer parameter, users Outlook profiles would not be updated automatically for internal users, but I was wondering if it could work for external users
using Outlook Anywhere ? We have no internal user (since our Exchange environment is in a datacenter).
Thanks

Hi,
After changing the RpcClientAccessServer parameter, all clients including Outlook Anywhere users will lose connection without any configuration update.
For more information, you can refer to the following article:
http://blogs.technet.com/b/aljackie/archive/2013/11/14/outlook-rpc-end-point-and-pf-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and-restart-outlook.aspx
“To add further on the CAS array, the Outlook clients with an existing Outlook profile would continue to use the old RPC endpoint rather than the new RPC endpoint (even though Autodiscover detected the change). This is because the old RPC endpoint does not
return an ecWrongServer response to the client. The RPC endpoint accepts the connection; therefore, Outlook ignores the Autodiscover response because it has a working connection.”
We can recreate profile or move database to resolve the issue.
Best regards,
Angela Shi
TechNet Community Support

Exchange 2010 CAS array with Exchange 2013 Mailbox Servers

Here is our current scenario,
Exchange 2007
2 - Hub Transport Servers
2 - CAS servers (cluster NLB)
2 - Mailbox servers (clustered)
Exchange 2010
2 - Huib Transport Servers
3 - CAS servers (array NLB)
2 - Mailbox servers (1 DAG)
We have not migrated any users to the Exchange 2010 environment yet. We're thinking that at this point we would rather go from 2007 to 2013. Does the 2013 mailbox server work with a 2010 CAS array?

Hi,
As far as I know, CAS array doesn' t exist in Exchange 2013. And OWA and other requests can be proxyed and redirected from Exchange 2013 to Exchange 2010.
For more information, you can refer to the following article:
http://blogs.technet.com/b/exchange/archive/2013/01/25/exchange-2013-client-access-server-role.aspx
Thanks,
Angela Shi
TechNet Community Support

Add a base permission to an existing role definition in sharepoint using CSOM

I have to add a base permission to an existing role definition in sharepoint using CSOM Managed API in SP2013, to update base permission of a permission level. I did use below code . But Role definition is not getting updated. What could be the reason? I
have updated RoleDefinition and Web as well but it did not help.
RoleDefinition rd = oClientContext.Web.RoleDefinitions.GetByName("My Permission");
if (!rd.BasePermissions.Has(PermissionKind.ManagePermissions))
rd.RoleTypeKind.ToString();
rd.BasePermissions.Set(PermissionKind.ManagePermissions);
rd.Update();
oClientContext.Web.Update();
oClientContext.ExecuteQuery();
Ashish Baranwal To know what you know and what you do not know, that is true knowledge

Hi Ashish,
I tested the same scenario per your post in my environment, and I got the same results as you got.
As a workaround, I recommend to delete the permission level and then recreate the permission level with the needed permissions:
ClientContext ctx=new ClientContext("http://sp");
RoleDefinition rd=ctx.Web.RoleDefinitions.GetByName("My Permission");
ctx.Load(rd);
ctx.ExecuteQuery();
if(!rd.BasePermissions.Has(PermissionKind.ManagePermissions))
rd.DeleteObject();
BasePermissions permissions = new BasePermissions();
//add the permissions needed
permissions.Set(PermissionKind.ManagePermissions);
RoleDefinitionCreationInformation roleDefinitionCreationInfo = new RoleDefinitionCreationInformation();
roleDefinitionCreationInfo.BasePermissions = permissions;
roleDefinitionCreationInfo.Name = "My Permission";
roleDefinitionCreationInfo.Description = "My Custom Permission Level";
RoleDefinition roleDefinition = context.Web.RoleDefinitions.Add(roleDefinitionCreationInfo);
context.ExecuteQuery();
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Can CAS array include server in DR site

Hi, there:
Our current Exchange 2010 environment:
1): Two HUB/CAS Exchange 2010 server running on Windows 2008 R2 use NLB to form a CAS array.
2): Two Exchange 2010 Mailbox server with one DAG.
Please note all of these Exchange 2010 servers are on our datacenter, now we would like to add the DR capability to our Exchange environment.
In regards to the CAS array design for the DR site, is it possible to add one HUB/CAS Exchange 2010 to current CAS/HUB array (this server need to be on SR site), this way when the two HUB/CAS server on the datacentre is not available user can still connect
the HUB/CAS server on the DR site?
If the subnet for the Datacentre and DR site is different is this possible?
If the subnet for the datacenter and DR site is the same is this possible?

Hi,
Firstly, I’d like to explain, CAS array’s members cannot be located in different sites. If all CAS servers are in the same site, CAS array can load balance MAPI request.
And if all mailbox severs are in the same site, DAG can apply failover while it may apply switchover if they are in different sites:
http://technet.microsoft.com/en-us/library/dd298067(v=exchg.141).aspx
A failover is an automatic activation process that can occur at either the database or server level. Switchover is manual activation process.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Same CAS Array Exchange 2010 (HLB), with OS Windows 2008R2 and Windows 2012.

Hello,
We have a 10 node DAG (Exchange 2010 SP3, Windows 2008 R2), with 2 CasArray.
We are planning to add news (multirole) servers and create a new DAG (Exchange 2010 SP3, Windows 2012) in this infra, in the same AD site, to migrate all mailbox from the other DAG (Migration from virtual servers to physical servers).
So we use the same CasArray (HLB, with F5) with différent OS version, during the migration time (1 month or more). I haven't found anything that say it's not supported or can be problematic.
Have you feedback or advice?
Thanks,
Sébastien

Hi,
Based on my knowledge, there is no need to deploy a CAS array with CAS servers running on the same Window version. The version can be different.
After a Client Access server array is defined within an Active Directory site, all Client Access servers within that Active Directory site are automatically part of the Client Access server array.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Planning for CAS Array with DAG intergation on Exchange 2010

We currently have 2 Exchange servers and have plans to add 2 more servers so it will be 2 servers with DAG and 2 servers with CAS array
Here is our current setup: EX01 has HUB, CAS and MAILBOX roles EX02 has MAILBOX only with DAG configured between 2 servers.
Should I install another Exchange (EX03) with Mailbox role and remove it from EX01 and then have another EX04 to setup CAS array? What is the best practice ?
alex serdyukov

Hi,
In your case, you can install another Exchange (EX03) with Mailbox role and remove Mailbox role from EX01 and then have another server EX04 to setup CAS array.
Then you can deploy DAG using server EX02 and EX03, and add server EX01 and EX04 to CAS array.
Best regards,
Belinda Ma
TechNet Community Support

[svn] 889: Add test case for BLZ-82 where HttpService should return multiple headers with the same name .

Revision: 889
Author: [email protected]
Date: 2008-03-21 13:08:05 -0700 (Fri, 21 Mar 2008)
Log Message:
Add test case for BLZ-82 where HttpService should return multiple headers with the same name.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-82
Added Paths:
blazeds/trunk/qa/apps/qa-regress/remote/MultipleHeadersTest.jsp
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/proxyService/httpservice/MultiHe aderTest.mxml

Hi again,
this may be old news to some people, but I just realized we can have the desired benefits I originally listed (encapsulation, reuse, maintainability, security) TODAY by using pipelined functions and using the table() function in Apex report region queries.
So the report query basically becomes, for example (if get_employees is a pipelined function)
select * from table(my_package.get_employees(:p1_deptno))
The only downside compared to a (weakly typed) sys_refcursor is that you have to define the type you are returning in your package spec (or as an SQL type). So it's a bit more coding, but it's still worth it for the other benefits it provides.
I like Apex even better now! :-)
- Morten

Rolling out SSL cert on CAS array

Hi there,
I have an exchange 2010 CAS array with 2 servers in it. I need to roll out an updated SSL certificate as the old one has expired
however, it only seems to allow me to install this certificate on the CAS1 server.
When I did was I (using the GUI) created a new Exchange certificate. Put in the FQDN of both my CAS servers when I created
it (although only 4 SAN names appear on the cert on Godaddys website, that being imap, pop, mail and autodiscover). Got my SSL cert from the 3rd party. Completed the certificate and it seems to be ok one my CAS1 server. But then there is no SSL cert on the
CAS2 server. I just wondered how I would go about installing it on that server, or even if it is necessary to have it on there.
I tried exporting/importing it from CAS1 to CAS2 but on CAS2 it just shows it as "The certificate is invalid for Exchange
Server usage".
Any help is appreciated

First of all, you don't need the server names in the cert if your Exchange urls are configured to a load balanced url. Going forward, you will not be able to get a certificate from 3rd party with internal urls (server fqdn) in it.
When you export the certificate from CAS1, make sure that you include the private key as well (there will be a check box to tick) and import it back on CAS2.
If not, you can just import the certificate into CAS2 by selecting Import Exchange certificate in EMC and select the 3rd party cert (just like you imported on CAS1).
Yes, you need the certificate on both servers, otherwise you will get certificate errors on clients (assuming that there is some form of load balancing in place - NLB or hardware).

Add event cases to an event structure using scripting

Hello,
Iam trying to (using scripting) update an event structure (add event cases) on a vi that is not on memory.
i get error 1054 The specified object was not found.
here is a picture of it.
any help in this will be greatly apreaciated.
Solved!
Go to Solution.

Another suggestion, the following VI is a wrapper for Traverse for GObjects VI and allows you to specify the name of the object you want. I always use this VI, I never use the Open VI Object Reference function, for the reasons tst mentioned:
vi.lib\Utility\traverseref.llb\TRef Find Object By Label.vi
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

If I add a cas array to an existing setup, will users continue to work fine until their settings are updated?

Similar Messages

Maybe you are looking for