If I add a row to my spreadsheet, how do I get the footer cell to show the last amount in the table automatically?

Balance Forward
$0.00
Date
Code
Check Number
Transaction/Description
Deposit
Withdrawl
Ending Balance
I am able to set up the Ending Balance to show the value of the cell right above it as long as I dont need anymore rows. If I add a row the value of the ending balance is stuck on the row or rows above the newly addd ones. All of my other formulas contiune on when a row is added, Is there a formula that can be added so that when a row is added the ending balance value moves to the last cell in the row?

Cobb425 wrote:
Thank you badunit for your responses and help. Jerrolds formula worked for me a little bit better for what I was looking to do. Thank you again for your help
Whatever works best for you. Jerry's formula assumed your table might not be totally full, that there might be empty rows at the bottom.  Mine assumed there were no empty rows; it gave the value of the cell directly above it, as you asked. With Jerry's formula, be sure you enter your data in order by date or keep it sorted that way to ensure you get the correct "Ending Balance".  If your last row does not have the most recent date, the formula will return the balance from a different row.
I don't see the advantage in Jerry's "Balance Forward" formula over the simpler one I provided.

Similar Messages

  • How do I add to a current playlist and How do I get the additions to download on my phone?

    First I tried to change a playlist and add more songs.  Now it won't let me add the songs.  Before, I was able to add them, but they would not download to my phone.  The old playlist keeps on downloading.  I think because it is in iclouds.
    Help.  How to I add songs to my current playlist and get them to download on my phone.  If I can't do that, how do I get the old playlist deleted from icloud, my computer and my phone so I can start over.  I don't have a lot of room on my phone.  Before I download a new playlist, I have to get rid of the old one.
    My phone is an iphone 5C LTE 8GB
    It has a capacity of 5.3 GB and 3.2 GB are available.  It is version 8.2 (12D508)  Model MGFD2LL/A

    I think I have this posted in the wrong area, but don't know how to change it.  I figured out how to download songs to my playlist in Itunes 12.1.  It seems that it does not work unless I delete the songs from my library first so they are only available on icloud.  Then I move the songs to the playlist.   After I am done adding the songs to the playlist, I press the cloud next to the playlist and the songs are downloaded to my iphone.  If I press sync first, I end up with the old playlist back on my computer minus the deletions and new songs.
    I am now having problems getting my new purchases to transfer to my library.  If anyone knows how to get Itunes 12.1 to do this automatically, please let me know.

  • How do I get the layout guides (A,B,C column headers and 1,2,3 Row Headers) to print with my spreadsheet?

    How do I get the Layout Guides (A,B,C column headers and 1,2,3 Row Headers) to print on my spreadsheet? They are invaluable for discussing the data with my clients over the phone.
    They appear while I am editing, but don't print with the spreadsheet. I know how to do it in Excel, but I am transitioning to Numbers. I can't imagine I have to type them into their own columns and rows. It must be a difference in vernacular that I can't find the solution in the User Guide. Can anyone help?

    Hi ktjobauer,
    Numbers is not Excel and Excel is not Numbers. Numbers is WYSIWYG (at least in File > Print and the actual printout).
    I can't imagine I have to type them into their own columns and rows.
    No, you don't. You can use the charm of Numbers to create cell references for your Excel clients.
    In this Numbers Table, I have added some extra Columns that you can hide later.
    Column B =COLUMN(A2)
    Column C =HLOOKUP(B2,'Table 1-1' :: $1:$2,2,FALSE)      [explanation later]
    Column D =ROW(B2)
    Column E =C2&D2
    Add those formulas to the first Body Row (below the Header Row) and Fill Down.
    Column C refers to another Table which you need only create once, to convert a Column number to a letter:
    and so on from 1-26, A-Z.
    You can move the second Table to another Sheet to hide it. Formulas will automatically adjust to keep the links between Sheets.
    Now in the first Table, select and Hide Columns B,C,D. Formulas will continue to work with hidden cells:
    Regards,
    Ian.

  • How do i get the line/row numbers to print on my numbers document?

    how do i get the row/line numbers to print on my numbers spreadsheet?

    Neil,
    You could make a Screen Shot with a cell selected so that the Row and Column tabs are active. That's a poor way to go about it though since the result will be a graphic with rather low resolution.
    Better to make some labels yourself and add them to the Sheet before printing. You can use single row/column tables for this, or Text Boxes.
    Jerry

  • How do I get the Air to add my music library to iTunes?

    I successfully used migration assistant to transfer all my music from a Windows PC to my new Mac Air.  How do I get the Air to add my music library to iTunes?

    msailar wrote:
    thanks for the hint Chris.  I took your meaning of the word "respind" as restarting my Air after the migration.
    Actually, it was "respond" (to this post).
    If you are not sure of anything below, post back before deleting anything.
    You can simply copy the items tin the migrated user to your current user account.
    Drag the Music folder, Pictures folder and Documents folder to /Users/Shared.
    Then log out of this user and log into your regular user account.
    Open 2 finder windows. On teh Finder icon in the dock, right click - New Finder window
    Open one to Users/Shared & the other to your user.
    On Shared, open Music and drag the contents to your user Music folder.
    Do the same for Pictures and Documents (into the same folders).
    After it finishes copying, open iTunes and everything should be there.
    You can then delete /Users/Shared/Music/ folder.
    Do the same for Pictures & Documents.
    After everything is copied and you are sure it's in your current user folder, go to System prefs > Users & Accounts and you can delete the new user that you did Migration Assistant with.

  • The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

  • After updating to Firefox 5 my Realplayer Recorder is not working due to that add on not being compatible. How do I get this to work again?

    After updating to Firefox 5 my Realplayer Recorder is not working due to that add on not being compatible. How do I get this to work again?

    Blue
    It sounds like you restored from an old back-up.  Did you back-up just before your software update?  It will use your last one and if your last back-up was a ywear old then it will use that one.
    In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
    Sorry for your losses.
    Cheers

  • -I have a password protected excel spreadsheet, how can I get my iPads and iPhones to read this and save it password protected?

    I have a password protected excel spreadsheet, how can I get my iPads and iPhones to read this and save it password protected?

    Documents to Go says that it, "Opens password protected Excel 97-2008 files", but does not say whether it can save them as "password protected".
    This might work for you.

  • How can I get the option in ma contact to say iPhone when I'm add someone's number that has a iphone?

    How can I get the option in ma contact to say iPhone when I'm add someone's number that has a iphone?

    about messaging http://support.apple.com/kb/HT3529
    troubleshooting message http://support.apple.com/kb/ts2755

  • How can i get the failed row numbers in batch insertion?

    Afeter execution of batch insert operation into a table, i use OCIAttrGet() to get the error number of insertion, as expected, it returns the correct number. however, when i use OCIParamGet() to get an error handle and then to get the exact failed row numbers , OCIParamGet() returns -2 , means "INVALID_HANDLE". can anyboy tell me why ? how can i get the exact failed rows?
    the snapshot of my code :
    int errNum = 0;
    int nRet = 0;
    nRet = OCIAttrGet((dvoid *)m_pIIOdbc->m_pStmtAll,OCI_HTYPE_STMT,&errNum,
              0,OCI_ATTR_NUM_DML_ERRORS, m_pIIOdbc->m_pErrHandle);
    if (errNum)
         OCIError* pErrHndl;
         int* pRow_off = new int[errNum];
         for (int i = 0; i < errNum; i++)
         nRet = OCIParamGet(m_pIIOdbc->m_pErrHandle,
    OCI_HTYPE_ERROR, m_pIIOdbc->m_pErrHandle, &pErrHndl, i + 1);
         nRet = OCIAttrGet (pErrHndl, OCI_HTYPE_ERROR, &pRow_off, 0,
         OCI_ATTR_DML_ROW_OFFSET, m_pIIOdbc->m_pErrHandle);
              delete []pRow_off;

    now the code is :
    OCIEnv      *m_pEnvHandle;                    
    OCIError      *m_pErrHandle;                         
    OCIError     *m_pErrHandle2;                    
    OCIServer *m_pSrvHandle;                         
    OCISvcCtx *m_pSvcHandle;                         
    OCIStmt *m_pStmtExec;
    OCIStmt *m_pStmtAll;
    OCIError** m_pErrorHndl;     
    int* m_pRowOff; //the array that will contain the failed row numbers
    int     m_nArrayLength; //length of array in once batch operation
    int m_nErrNum; //error number
    int m_nSucCount; //successful record number
    //initialization
    //m_nArrayLength is a parameter passed in, so i can not tell the exact length of the array, dynamic space allocation is needed
    m_pErrorHndl = new OCIError*[m_nArrayLength];
    m_pRowOff = new int[m_nArrayLength];
    //execution
    OCIStmtExecute(
              m_pSvcHandle,
              m_pStmtAll,
              m_pErrHandle,
              (ub4)m_nArrayLength,
              (ub4)0, (OCISnapshot *)NULL, (OCISnapshot *)NULL,
              OCI_BATCH_ERRORS
    //get successful records number
    m_nSucCount = 0;
    OCIAttrGet((dvoid *)m_pStmtAll,OCI_HTYPE_STMT,&m_nSucCount,
              0,OCI_ATTR_ROW_COUNT, m_pErrHandle);
    //get error numbers
    m_nErrNum = 0;
    OCIAttrGet((dvoid *)m_pStmtAll,OCI_HTYPE_STMT,&m_nErrNum,
              0,OCI_ATTR_NUM_DML_ERRORS, m_pErrHandle2);
    //get failed row numbers into the array
    if (m_nErrNum)
              //get failed row numbers into the array
              for (int i = 0; i < m_nErrNum; i++)
                   //initiallize error handles               OCIHandleAlloc((dvoid*)m_pEnvHandle, (dvoid**)&m_pErrorHndl,
                        OCI_HTYPE_ERROR, (size_t)0, (dvoid**)0);
                   OCIParamGet(m_pErrHandle, OCI_HTYPE_ERROR, m_pErrHandle2, (void**)&m_pErrorHndl[i], i);
                   OCIAttrGet (m_pErrorHndl[i], OCI_HTYPE_ERROR, &m_pRowOff[i], 0,
                                            OCI_ATTR_DML_ROW_OFFSET, m_pErrHandle2);
    now, if batch insert is executed, eg, there are 10 records to be inserted, thus m_nArrayLength is set to be 10. There are 5 records of the 10 have exist in database, so some of insert operations will fail. After execution, m_nErrNum is 5, and i can get the failed row numbers.Everything seems go well.
    However, if batch updata is excuted, eg, 10 records to be updated, m_nArrayLength is set to be 10, and also there are 5 records of the 10 have exist in database. After execution, the OCIStmtExecute() returns 1, m_nErrNum got by
    OCIAttrGet((dvoid *)m_pStmtAll,OCI_HTYPE_STMT,&m_nErrNum,
              0,OCI_ATTR_NUM_DML_ERRORS, m_pErrHandle2)
    is 0, and m_nSucNum is 5. Why?? how can I get the rows that fail? i have to know which rows do not exist in database??

  • (JTable) How can i get the first columns cell in a selected row?

    Hello. I am trying to figure out how i can get the first columns cell within a selected row no matter what cell is selected in that row. I have a class that extends AbstractTableModel which represents the table. Now i have another class that extends DefaultSelectionModel. Each model is added to the JTable via setModel(TableModel dataModel), setSelectionModel(ListSelectionModel newModel). Now i don't understand what i have to return from getMaxSelectionIndex(). Any ides? Thanks.
      class xTableModel extends AbstractTableModel{
         private static String[] cols;
         private Object[][] data;
            public void setTableModel(Object data[][], String[] cols){
             this.cols = cols;
             this.data = data;
            public String getColumnName(int col){
             return cols[col];
            public int getRowCount() {
             return data.length;
            public Object getValueAt(int row, int col) {
             return data[row][col];           
            public void setValueAt(Object value,int row,int col){
             data[row][col]=value;
            public int getColumnCount(){
             return cols.length;
    class ColumnListenerModel extends DefaultListSelectionModel{
         public int getMaxSelectionIndex(){}

    int row = table.getSelectedRow();
    Object data = table.getValueAt(row, 0);

  • How do I get the numbers ipad app to plot a graph of dates against values, where the most recent date is on the right of the graph, but the most recent date is at the top rather than bottom of the rows in the table?

    How do I get the numbers ipad app to plot a graph of dates against values, where the most recent date is on the right of the graph, but the most recent date is at the top rather than bottom of the rows in the table?
    Also how can it be a line graph without plotting a circle at each value?
    Thanks this is very frustrating

    Make a copy of the table and produce your Line chart or Bar chart from the copy. Sort the copy into the order you want to see in your chart.
    Alternately you could use a Scatter Chart...
    Jerry

  • I have installed Lion and the Front Row application desapered!  How do I get it back

    I have installed Lion and the Front Row application desapered!  How do I get it back

    denisefromgreen valley wrote:
    I have installed Lion and the Front Row application desapered!  How do I get it back
    You don't.  Apple no longer ships Front Row... it's part of the OS... so it goes away when you upgraded.

  • The apps I created from "add to homescreen" have turned white and have a few lines and circles in it. How can I get the picture back on them?

    The apps I created from "add to homescreen" have turned white and have a few lines and circles in it. How can I get the picture back on them?

    Those aren't apps; they're bookmarks to websites. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears? If all else fails, you can just re-do the shortcuts.

  • TS2446 how can i get my security questions if my account is locked why cant you add a forgot security questions button or something to get the security questions back?

    how can i get my security questions if my account is locked why cant you add a forgot security questions button or something to get the security questions back?

    The Three Best Alternatives for Security Questions and Rescue Mail
         1.  Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
         2.  Call Apple Support in your country: Customer Service: Contact Apple support.
         3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Maybe you are looking for