If I add an airport express to extend my wifi network, will I lose some of the bandwidth?

I currently have an Airport Extreme, which does a great job, however we are losing some signal at the top of the house. If I add an airport express to the middle floor, will it half the current download speed we are getting, but provide a stronger signal, or does it replicate the same speed?

Adding another base station to extend the wireless network does not directly affect your the download speed provided by your ISP. It will; however, use up some of the overall bandwidth of your wireless network for maintaining that extended network.
When extending a base station will only repeat the bandwidth at which it receives it. That's why it is important to properly place this base station for best overalll bandwidth performance. Please check out the following AirPort User Tip for details.

Similar Messages

Tried to use my two airport express to extend my wifi network on a windows pc but no success

Tried to use my two airport express to extend my wifi network on a windows pc but no success

My two airport express base stations are 802.11n and i am triying to use them extend my wireless network which is using a D link wirless router as supplied my my ISP connected to TalkTalk network.
Unless the D-Link wireless router has Ethernet ports for each of the 802.11n AirPort Express Base Stations (AXn) to connect to, they will NOT be able to extend the wireless range of the D-Link.
Instead, when directly connected and reconfigured for a roaming network, these base stations CAN extend the range.
Please check out this Apple Support article on how to use AirPorts to extend a wireless network.
The key is to have both AXns configured as follows:
As a bridge.
Each having a unique Base Station Name.
Both using the same Network Name (or SSID), wireless security type and password as the D-Link.
Each AXn to use a channel at least 3-5 channels apart both from each other and that of the D-Link.

I have a DLINK 524 150 and bought recently an airport express to extend my WIFI network. I tried by many ways to get the connection but it was impossibble. If possible, what is the necessary setup and orientation I have to follow ?

In have a DLINK 524 and bought recently (march/2013) an airport express to extend my WI-Fi network. I triedmany ways to get the connection but it was impossible. Is really possible to get this connection ? If it is, what is the necessary setup and orientations that I have to follow ?
Thanks

Apple designed their "extend" feature as a proprietary function to work with other Apple routers, so it's extremely unlikely that the AirPort Express would be able to wirelessly extend your D-Link network.
If you can connect the AirPort Express to the D-Link router using a wired Ethernet connection, the Express can likely be configured to provide more wireless coverage that way.

Can I use an additional airport express to extend my wifi network

Hi,
I have an airport express running my wifi network but I have black areas in farthest away areas. If I buy a further express would that extend my network ? If so what would I need to do !
Tnx

Hi Matt
Thanks for reply - my speed is already poor - what would be a better solution ?
Tnx again

I did set up my Airport Express to extend my existing network. It did ok but I can't see the name assigned to the Airport Express name in my available networks. Is that normal?

I did set up my Airport Express to extend my existing network. It did ok but I can't see the name assigned to the Airport Express name in my available networks. Is that normal?

If the AirPort Express is extending your network it is using the same wireless network name as your "main" router.
Your main router and the Express act like one "big" network now.
Your computer will connect to either the main router or the Express automatically....depending on where it sees the best signal.

Using Airport Express to extend my wireless network

I recently purchased a Time Capsule but found that I could not see the wireless signal from my bedroom. To solve this I purchased an Airport Express to extend the range. I plugged the AE into an outlet in my bed room and set it up to join my existing network. Everything looked fine from the point of view of the Airport Utility. Unfortunately my iPod Touch still can not see my wireless network from my bedroom. I new iPad can see it but the signal is very weak, even when I hold it right next to the AE. Is there a setting I missed?

Rick, welcome to the discussion area!
I plugged the AE into an outlet in my bed room and set it up to join my existing network.
You need to configure the AirPort Express to "Extend a wireless network". The AX does not provide any additional wireless coverage when it is set to "join".
First, you need to check a setting on your Time Capsule as follows:
AirPort Utility > Manual Setup > Wireless tab (below the icons)
Make sure there is a check mark next to "Allow this network to be extended"
Update to save any changes
On the AirPort Express move it close to the Time Capsule for configuration:
AirPort Utility > Manual Setup > Wireless tab
Wireless Mode = Extend a wireless network" (Hold down the option key on your Mac if you do not see this choice appear when you click the selection box).
Wireless Network Name = Same name as your Time Capsule Network
Check mark next to "Allow wireless clients"
Security = Same setting as your Time Capsule
Password = Same password as your Time Capsule
Confirm Password
Update to save settings
The AirPort Express can only "extend" what it "receives". Most users position it too far away from the main router and consequently, the Express extends a weak signal. Try a location that is about 1/2 to 2/3 the distance between the Time Capsule and the area that needs move coverage. Then experiment a bit to find the best signal.
Post back on your results.

I have a pioneer vsx-910-k and airport express.I have a wireless network at home. What's the best arquiecture/config to do with this hardware?

I have a pioneer vsx-910-k and airport express.I have a wireless network at home. What's the best arquiecture/config to do with this hardware?

I would suggest that you connect the Pioneer to the AirPort Express Base Station using an optical digital audio cable that has a TOSlink connector on one end and a 3.5 mm optical connector (Mini Plug) on the other. You can then connect the Mini Plug end into the AirPort's audio port and the TOSlink end into one of the Pioneer's optical digital audio ports.

HT4259 i connected two airport extremes by extending a wifi network. wifi seems weak...help

i connected two airport extremes by extending a wifi network. all my lights are green, and airport utility confirms connections are excellent. but the extended base station hasn't improved my wifi range in the area i set it up in.

If you have a Mac laptop handy, run the test that I have outlined below to find out if the remote AirPort Extreme is really extending the signal at all.
Here, I assume that both of your AirPort Extremes are the newer "square" versions....not the older "round" version.
Locate your Mac laptop close to the "main" AirPort Extreme
Hold down the option key on the Mac while you click on the fan shaped AirPort icon at the top of the screen
Look for the BSSID and jot down the last few characters
The BSSID is the AirPort ID of the AirPort Extreme
Now, move the laptop close the "remote" AirPort Extreme and perform the same test
If you see the same BSSID as the "main" AirPort Extreme, your Mac is picking up from the main AirPort...and the remote AirPort is not configured correctly to extend.
If you see a different BSSID near the remote AirPort, that indicates that the Mac is picking up a signal from the remote AirPort....which is exending the signal correctly.

How do I add an Airport Express to extend the range of my WIFI network with my iMac as a base station?

Hi people
I need help to configure a new Airport Express only to extend the range of my WIFI network.
My ethernet cable from modem is connected directly in my iMac and I am sharing the internet by WIFI inside home very fine.
Now, I would like connect my devices on my garden on backyard.
I can't move my iMac from their place and i just want add a Airport Express between the iMac and backyard to extend the range of WIFI.
But I can't to configure to that. On Airport Utility appear the Airport Express connected directly to internet globe, but don't work.
So, what can I do? What is wrong?
Thanks all and best regards.
Carlos Sgrillo, from Brazil.

The AirPort cannot do what you ask.
The Airport needs to connect to a modem, or another router......not to a computer.
The Express can only extend a wireless signal that has been provided by another Apple router.

How do I use Airport Express to extend my current network.

I am now using an Airport Extreme and want to use my old Airport Express to extend my network. How do I do this? Thanks!

Linc44, welcome to the discussions!
I am now using an Airport Extreme and want to use my old Airport Express to extend my network. How do I do this?
By "old AirPort Express", I take it that you have a "b/g" version of the device, which is model number A 1084. Is that correct?

How do I use airport express to extend my wireless network?

How vcan I extend the range of my wireless network using Airport Express?

It appears that you may have "join a wireless network" and "extend a wireless network" mixed up a bit.
The Express can "join" virtually any wireless network produced by any manufacturer's router if it is provided with the correct settings:
name of the wireless network
the correct wireless security settings
and correct password.
"Join" is normally used for AirTunes or to connect a USB printer to the Express for remote printing.
But, the Express does not provide any additional wirless coverage when it "joins" another wireless network.
Apple's "Extend a wireless network" feature, which was introduced about 5 years ago, allows the Express to connect to another Apple "n" wireless router and then "repeat" or "extend" the wireless signal....providing more wireless coverage in the area where the Express is located.
This is a proprietary setting. Apple says it will not work with devices from other manufacturers. To our knowledge, this is correct.
Prior to 2007, Apple used a setting called WDS to allow the Express to be configured to provide more wireless coverage. Attempts were made by a number of manufacturers to standardize the WDS settings, but things were never finalized.
The result is that Apple's older "b/g" routers were sometimes compatible with WDS settings from another manufacturer. There were a handful of products....5 or 6, as I recall....that were said to work. Some did, some didn't. Linksys had a couple of models, Netgear had one, SMC another, etc. Extremely limited.
Since WDS was never adopted as an industry standard, manufacturers developed their own WDS settings. Compatibility was extemely limited and unreliable. That continues to this day with WDS.
Bottom line....It is always best to stick with the same manufacturer throughout your network as far as routing is concerned.
If you have an newer "n" Apple router like an AirPort Extreme, the Express can extend the wireless as can along Extreme. If your Extreme is dual band, and you want to extend both bands, then you need another Extreme.
Another responder suggested to someone that they could connect the AirPort Express to a router via Ethernet. What exactly would that achieve?
That is a completely different subject since this discussion is about extending a wireless network using wireless only.

HT4259 Trying to set up airport express to extend my wireless network. Primary base station is a time capsule. Even when I plug in the airport express to mac it cannot find it.

Trying to set up airport express to extend my Wi-Fi network. Primary base station is a time capsule. Tried searching for airport express using Wi-Fi status, no luck. Even tried plugging airport express into iMac, still no luck. Airport express showing solid amber light. Thanks for any help.

Airport express showing solid amber light
Unfortunately, this can mean one of two things:
1) The Express is locked up and will need a Factory Default Reset procedure to try to return the device back to its original default settings so that it can be reconfigured again.
2) The Express is defective. If you cannot get the Express back to a slow, blinking amber light after a Factory Default Reset, the Express will need to be replaced.
Try the Factory Default Reset a few times and report back on your progress.
Resetting an AirPort Base Station or Time Capsule FAQ

Using Airport Express to Extend a wired network using Belkin N Router

I have an ethernet/wired network in my home office and am using the Belkin N Router which is connected to the upstairs by ethernet also. I have a wireless network that the Belkin router uses to let me connect to the internet wirelessly if needed and I use it for my MacBook Pro inside the house but can't outside [the Belkin is connected to cablemodem].
I am trying to use my Airport Express to 'extend' the network from my home office out to my back deck by having it wirelessly be available [it is connected to main router/cable by ethernet/wired]. I have 5 bars on the Belkin Router wireless signal but very low unreliable bars from the Airport - either because it is not relaying the wirelss network of the Belkin router or it's not able to send its wifi signal from its ehternet/wired connection to the main router/cable modem, not sure which --
Short of pulling an ethernet wire outside to the back deck or getting an antenna to hang on my MacBookPro to better receive the home office wireless signal, is there a way to set up the AX soit can become an internet transmitter wirelessly of the wired network it is hooked to???
I read http://docs.info.apple.com/article.html?artnum=108040
but that didn't seem to help == and it appears the AX won't extend a non Apple wireless signal and I don't have one [tried the Extreme but it didn't work = the Belkin has been perfect = I can wirelessly connect in the room above the home office but would love to be able to use the AX to extend its power or at least use the wired linkage to then extend the power wirelessly....

Hey
in the following thread one of those top users posted a list of wireless routers AEXP is able to extend wireless network with via WDS
http://discussions.apple.com/thread.jspa?threadID=1492474&tstart=195
maybe that belkin is your modell?
and here:
http://ryanschwartz.net/2004/08/05/airtunes-airport-express-and-the-wrt54g
also here:
http://www.beatnikpad.com/archives/2004/10/19/airportexpresswds
are descriptions of how to connect to 3rd party routers (not belkin but the way to connect of both is quite similar so it might possiby help you too.
Not using wep, wpa/ wpa2 during installation and connecting the AEXP to Mac or Lan Port of your router should help.

Using an Airport Express to Extend a Netgear Network via WDS

I have a Netgear WNDR3700 Wireless-N router, which supports WDS. What do I need to do on my Airport Express to make it extend the Netgear signal via WDS?

Remember that since WDS is not rigorously defined in the specification not all flavors of WDS are compatible.
You would need to configure the Netgear to act as a WDS main base station. Then you would need to configure the AirPort Express (AX) to act as a WDS remote base station. The AX must be configured to use the same SSID (network name), channel, and wireless encryption type/level/password as that used by the Netgear.
Remember that each WDS link cuts your available wireless bandwidth in half.

HT1731 How does one configure a NEW (unconfigured) AirPort Express to join a WiFi network that has a non-broadcasted SSID?

The following KB article assumes that the user has a configured AirPort Express:
http://support.apple.com/kb/HT1731
I reset my AirPort Express, because the SSID of the WiFi network changed and its name is not broadcast for security reasons.
When using the "AirPort Utility" ( not the "AirPort Admin Utility" – which is the wrong name of the application in the article! ) the application found the unconfigured AirPort Express, connected to the LAN via ethernet; However, when selected, the configuration "wizard" assumes that the user wants to configure the AirPort Express as a WiFi base station.
I selected the option to have the AirPort Express join a WiFi network; However, the AirPort Utility sent back an error, saying that a "Base station" ( WiFi network?! ) could not be found. Well, guess what? That's because the SSID of the network I want the AirPort Express to join.
UGH!
...and the best part is that there is no other solution, but to run with the AirPort Utility's assumptions, configure the AirPort Express as a WiFi Base station, then follow the KB article's instructions ( which are not accurate ) to re-configure the AirPort Express as a WiFi client.
This is a really bad user experience, Apple.
Please try following your own instructions to see how fantastically they fail..then, re-write your KB articles.
Thanks,
PS — If anyone knows of any easier methodologies, do tell. (That's the "question" part of this inquiry )
PPS — My Mac Pro, which I used to configure the AirPort Express, does not have WiFi.
PPPS — Why do all the articles that match searches for "AirPort Express" return articles that refer to "AirPort Base Stations"?! Please, for the love of UX, be consistent!

Here are the basic steps:
Run the AirPort Utility
Select the AirPort Express
Click on Manual Setup
Click on the AirPort icon
Click on the Wireless tab
For Wireless Mode, select the "Join a wireless network" option
In the Wireless Network Name field, enter the SSID of the hidden wireless network you want the Express to join.
Select the approrpriate wireless security type in the Wireless Security window.
Enter the appropriate wireless security password for the hidden network.
Click on Update.

If I add an airport express to extend my wifi network, will I lose some of the bandwidth?

Similar Messages

Maybe you are looking for