If I am in Cs6 and want to open my image in Lightroom is it possible ?

Do I need to add any more to my question ?

Hello,
apart from John's hint, so that you will get more qualified answers: why shouldn't it be possible? Click into an Image and use right click. Please have a look at my screenshot of my GermanDW:
Incase Lr doesn't appear in your list on the right, use "Durchsuchen" (something like "search) to find Lr.
Good luck!
Hans-Günter

Similar Messages

Wanting to use Photoshop CS6 to open images directly from iPhoto 11. Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open images directly from iPhoto. Before I installed PS I was not able to edit photos in iPhoto 11. Nothing

Wanting to use Photoshop CS6 to open images directly from iPhoto 11.
Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open
images directly from iPhoto. Before I installed PS I was not able to edit photos
in iPhoto 11. Nothing happens when I click on ‘edit‘ it is blank.
And now it will not work using Photoshop CS6 either.
From Help Center I have gone to iPhoto/Preferences/ Advanced and chosen Photoshop CS6 to Edit Photos but then cannot find an 'Open' to click? Perhaps this is the problem?
When I select a photo in iPhoto and click the Edit button - nothing happens.
Please advise. Glenys

This may be of help to you:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the "double click" defult to o

I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?

You can associate files from the Bridge level and the Desktop level.
In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
If you want to open files from the Windows Desktop in CS4, these are the instructions:
Do this from the Windows Desktop:
If you want your image file to open in Photoshop and it doesn't, right click on it and choose
Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file".

I scanned an image and want to use the image trace tool, but it doesn't pick up all the lines. Is there a way to darken the lines before using the image trace tool?

I scanned an image and want to use the image trace tool, but it doesn't pick up all the lines. Is there a way to darken the lines before using the image trace tool? Help!

If the scan is in B&W, then play with the Threshold setting here
If it's in Color, then you will have to open the scan in a Raster editing software (like Photoshop) and play with the Brightness/Contrast settings to make the lines bolder.

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN A

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
I use a lapto (windows 7) 64-Bit operating system.
Thank you,
my email is: [email protected], if you send me the answer to my query

You need to activate Photoshop.
Mylenium

I am working in pages with a template and want to keep the image but get rid of the black background?

I am working in pages with a template and want to keep the image but get rid of the black background?

Surprise surprise but we can't see what you are looking at and referring to.
What black background?
If it is black background in the actual photo:
Menu > Format > Instant Alpha > drag the cursor over the colored background you wish to remove
Peter

I have an Apple PC. If I have an open page (active) and want to open a second page for an unrelated reason, how can I do that?

I have an Apple PC. If I have an open page (active) and want to open a second page for an unrelated reason, how can I do that?

Have icon but cannot connect - Please Help.
Mine is Gen. 2 - Model MC572C/A. I have the YouTube icon but cannot access YouTube. Message says "No content was found - There is a problem communicating with YouTube. Try again later." This problem has been for at least 1 month now. Any ideas?

I have won a 11 inch 128GB MacBook Air and want to increase the storage to 256GB, is that possible?

I have won a 11 inch 128GB MacBook Air and want to increase the storage to 256GB - is that possible?

When one is tight on storage space, offloading data onto a $79 external spinning disk drive is cost effective but not portable. When you are not at your desk you cannot access the data. On any Mac that has a MicroSD slot, one can add up to 128 GB of inexpensive portable storage using the following options that cost less than $100. This is cost-effective alternative to upgrading the internal SSD on a MacBook Air for $200 to $315. One can use multiple microSD card to multiply the storage they carry with them.
Time Machine does not backup these microSD cards so using an alternative backup program, such as Carbon Copy Cloner or Super Duper! would be prudent. One could partition their Time Machine backup drive(s) with 64 or 128 GB partitions (one per microSD card) so another backup hard drive is not needed.
For more about backups:
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031
TheMiniDrive.com Adaptor: $30 http://www.amazon.com/s/ref=bl_sr_pc?ie=UTF8&field-brandtextbin=TheMiniDrive.com &node=541966
64 GB Flash 30 MB/s: $47 http://www.amazon.com/SanDisk-microSDXC-Memory-Adapter-SDSDQU-064G-AFFP-A/dp/B00 9QZH6JS/ref=pd_bxgy_pc_img_y
Total $77 for 64 GB of portable storage.
PNY StorEDGE 128 GB: $95 http://www.amazon.com/PNY-StorEDGE-Memory-Expansion-P-MEMEXP128U1-EF/dp/B00DC9U2 Q8/ref=pd_cp_pc_3
Thanks go to wwynne23 for pointing me to this miniSD card solution.
PlotinusVeritas gives some great suggestions for purchasing external hard drives in this thread:
https://discussions.apple.com/thread/5602141?tstart=0

I have switched from using a PC to an iMac and want to know how to register Lightroom 5.7 for new Mac?

I have switched from using a PC to an iMac and want to know how to register Lightroom 5.7 for new Mac?

Are you on CC or standalone perpetual licence?
If the former I believe you merely download LR from the CC site onto your iMac and log in and off you go.
If the latter, download LR onto your Mac from the perpetual licence site (not the CC version), install it and use the same licence number as with your PC.

Until today(20.09) when i wanted to open an image on any website it opened, now it asks me with what to open it and it downloads it.

Until today(20.09) when i wanted to open an image(like jpg,for exemple)on any website ,it did.Now it asks me with what program to open it and when im giving it , it first downloads it than opens it.I need to kno why and what to do to revert it to the way it was before.
(Hope it wont take long until i wil get the answer...)

# Type ''about:support'' in the address bar and press Enter.
# Click the Show Folder button. This opens a Windows Explorer window with your profile folder.
# Back in the Firefox window, click the ≡ Menu Button, then the Power Symbol to exit Firefox.
# Back in the Windows Explorer window, right-click the ''mimeTypes.rdf'' file and choose Cut.
# Right-click the desktop and choose Paste.
# If the problem goes away when you next start Firefox, right-click the ''mimeTypes.rdf'' file on the desktop and choose Delete.
# If the problem doesn't go away when you next start Firefox, check if you have the same issue with you start Firefox with add-ons disabled.
#* [[Troubleshoot Firefox issues using Safe Mode]]

I own Creative suite 5, itself an upgrade from cs3 and want to open Nikon d800 files

I own Creative suite 5, itself an upgrade from cs3 and want to open Nikon d800 files?

Hi,
From within photoshop cs5 go to Help>Updates to install the latest updates for your cs5 applications
including camera raw 6.7 which should open the D800 camera raw files.

When I am in LR and want to open the file in Photoshop, nothing happens.

I have uninstall and intalled again, but still, nothing

You can associate files from the Bridge level and the Desktop level.
In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
If you want to open files from the Windows Desktop in CS4, these are the instructions:
Do this from the Windows Desktop:
If you want your image file to open in Photoshop and it doesn't, right click on it and choose
Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file".

I have some long spreadsheets and want to open them at the bottom instead of scrolling down through all the data. How do I do this?

I have some long spreadsheets and want to go to the bottom to add new data without scrolling down through all the old entries. When I open a table now it goes to the top row and I have almost 300 rows to scroll through. I would like to set the table up to automatically go to the bottom row.

Zach,
You have a couple of options. If you use 100% View Zoom, and if you leave a cell selected in the bottom row of the table when you Save and Close the document, it will reopen with that cell in view.
You could also sort your table in the opposite order and add new rows at the top. Then you wouldn't have to worry about what zoom you use. To insert a row at the top, select a cell in the current top row and press Option-UpArrow. That will add a new blank Top Body Row.
Jerry

We have build a nice Flex BI front end and want to open-source it would this be useful to the group?

Hello, I am the CEO of DataRoket (www.dataroket.com) and we are a data integration and analytics platform. As part of our effort, we have built a really nice data visualization and reporting package.
Since this is not our core business and we want to give back to the community and also see it continue to evolve, we are going to open source the Data Visualization module of data roket.
You can look at the application by going to www.dataroket.com. If we did this, we would like to get some people to work on this and use it freely for your clients etc.
I want to know two things please:
1. is this interesting and would it be useful to the community
2. Are there people that would like to continue to push this capability and shepard the open source effort with us?
Thanks in advance for your feedback
James Fox
[email protected]

I like the idea of open source. Have you considered adding a demo/dummy Flex
app to your website for a fictional business. Just to show your capabilities.

Display drivers crashing and restarting after opening any image in Photoshop CS6. After that Photoshop CS6 doesn't respond.

I have just purchased Acer Aspire R7 (2nd Genre). I have installed Photoshop CS6 as trial. Now when I open any image or drag any image in Photoshop I get this error in the taskbar "Display driver stopped responding and has recovered". After that Photoshop doesnt respont and I have to force close it from task manager.
Can anyone guide me how to solve this issue?

Well, what more do you need to know? Update your graphics drivers and configure them suitably.
Mylenium

If I am in Cs6 and want to open my image in Lightroom is it possible ?

Similar Messages

Maybe you are looking for