If i buy a blue ray with a digital copy and if i download the movie on my PC from work, i will be able to download it on my Mac at home later on?

if i buy a blue ray with a digital copy and if i download the movie on my PC from work, i will be able to download it on my Mac at home later on?

No, it will be a one use only code. Copy the file onto a memory stick and import it into your library at home later.
tt2

Similar Messages

  • Blu-ray with separate 4-pin and 39-pin connector on a new Mac Pro ?

    I have a 2007 blu-ray burner I am trying to install as the 2nd drive in my new 12-core Mac Pro. But how to you connect it (it has separate 4-pin power and 39-pin connector) ? Any feedback would sure be appreciated.

    The drive is PATA. Older Mac Pros uses PATA optical drives but newer Mac Pros use SATA. There are adapters
    <http://www.sonnettech.com/product/tempo_bridge.html>
    The adapter was intended for hard drives but should also work with optical drives. You may want to check with Sonnet before buying to see if it works with Blu-ray drives

  • HT1349 My ipod was submerged in water monentarily. I have dried it with a hair dryer and set it in the sun for 1 hour. It now will turn on and only bring up the connect to itunes screen. My keypad is locked and will not unlock by connecting to itunes.

    My ipod was submerged in water momentarily. I have dried it with a hair dryer and have placed it in the sun for 1 hour.  It will now turn on but will only bring up the connect to itunes screen. When I connect to itunes it is not recognized because it is locked with a security code. I have tried to reset the ipod using the instructions in the user manual to no avail. The accessibility screen is functional because I can turn on/off the voice over and the black and white screen. I think I am making progress but cannot unlock it. Does anyone have any other suggestions? Thanks

    Unfortunately, using a hair dryer or placing the iPhone in sunlight, at best, will dry the outside of the device. If water got inside, it may still be possible that this water has not dried and can short out the internal battery or cause other circuit damage ... and what you are seeing may be the results of that. I would recommend that you leave the iPhone turned off and take it to your local Apple Store. They may be able to help, but I wouldn't expect them to offer you a replacement. Sorry!

  • Disregard my previous question about downloading the Windows version onto a disk. My friend was able to download it herself with dial-up.

    Earlier today I asked if it would be possible to download the Windows version of Thunderbird onto a disk using my Mac. My friend just called up and said she successfully downloaded it herself. Sorry for the false alarm.

    all communication on this can be located here:
    https://support.mozilla.org/en-US/questions/1008956?esab=a&s=&r=0&as=s

  • Compressor - export to Blu-ray with more than 6 chapter Markers?

    Hi,
    I'm interested in creating Blu-Ray discs.  I've played around taking a self contained 30 minute movie I created with FCPro 7 - it has several chapter markers put in while editing in  FCPro.
    I took the SC movie and brought it into Compressor and burned directly to a DVD with the Chapter markers.  It worked perfectly.
    2 questions, if anyone has done this . . . if I buy a Blu-Ray burner and firewire it into my MacBook Pro - can I burn the Blu-Ray exactly like I did the conventional DVD?  Except now it'll be High Definition?  I'm guessing in COmpressor, when I 'selected' the internal DVD burner - I guess I'll see the new external Blu-Ray one after I firewire it into the MacBook Pro?
    My question is, will it then burn to the Blu-Ray exactly like it did to the internal conventional DVD burner, except be in HD now?
    I just don't want to buy a Blu-Ray burner and have something nt work?  Thanks, if anyone can confirm this.
    I also have Roxio Toast Titanium 11.  But keeping it all in Compressor seems easier - with limited screens.
    Oh, I only get 6 chapter markers on a screen thru Compressor.  Any tricks as to how I can get more than 6?  I have like 30, and I'd rather not go thru 5 screens getting to the end!
    Thanks very much if anyone has any experience in this area.
    Larry

    Thank you, Shawn.  You're confirming everything I thought!
    Just asking . . . perhaps you have a few thoughts here:
    - Is Compressor version 4 any "different" than 3.5 - as far as just dropping in a QT movie master to compress?
    - I guess there's no way to get more than 6 Chapter Markers in Compressor DVD?  I don't see a way, perhaps there is? Or . . . I have to learn toast!  But I can do that!  Just easier if Compressor would do it all!
    Thanks again

  • Will I need to buy a digital tuner if I buy a blu ray player?

    I was looking at the blu ray DVD players and noticed that some came with a digital tuner and some without. Will I have to buy it separate if it does not come with one or will my HDTV provide that?

    I was comparing an LG blue ray player BD390 and a Sony Blue ray player BDP S560, out to the side listed under features was Digital tuner; The LG said yes and the Sony said no. Both were listed around 250$ I was wanting to know if I need this? Do I have this covered by having an HDTV? Why does a blue ray player need this? The reason I asked is to understand the digital tuner issue a little better. Thanks for your replies. 

  • Cs 6 blu-ray with sub menus, only go back to main menu

    I have burned a blu-ray with a main menu then sub menus: audio setup, chapters, extras.
    (note: they are regular menus NOT pop-up menus and I would rather not do pop-up menus at this time)
    when I am playing any of the sub menu content (trailer or making of or picking a chapter button from the chapter menu etc...) and press the menu button on the Blu-Ray player while it plays that content, it goes to the main menu instead of the sub menu.
    I checked it in the simulator and it was working perfectly....just as I would expect it to.
    each sub menu item (a trailer or making of featurette for example) is set to go back to the sub menu and it's button
    when done playing...and it does. 
    It just refuses to do that when the menu button on a blu-ray player is used and instead goes to the main menu.
    I ran the link checker before building the folders and burning it...no conflicts found.
    This seems to be an issue with Encore in general, reading about this here and in
    other forums.
    Can Encore simply not create a proper blu-ray disc with sub-menu's you can
    return to when the menu button on a remote is pressed?
    Do I have to buy BluStreak in order to correct these rather obvious navigation errors?

    Let us know what you find.
    I think the original poster in the other thread observed that commercial BDs were showing the same behavior.
    Even if true, it does not mean that some kind of scripting might not work.
    But Encore would not have the option.

  • Play 3D blu rays with the proper hardware

    Hello community I have a burning set of questions.  So let me set the scene  i have a MBP 13", Early 2011, i5 2.3, 16gram, 3D projector.
    So I'm looking at buying the MCE internal Blu ray drive to play 3D/blu rays.  What i want to do is play 3D movies though my projector and here come the question
    1.  Can the HDMI on my mac push though the 3D signal "frame packeting"
    Thats the main question because if this doesn't work then its time to look for another solution.  if reply to this can you put in links to confirm your findings
    MCE internal Blu ray drive
    http://store.mcetech.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=UNBBD6X -A&Category_Code=STORBD&Product_Count=4

    sorry OGel thats not what I'm asking and your half right about apple not supporting Blu rays and I quote " At a software level" but hardware its fully compatitable and the mini display port is technically able to push out the Res and Hz thats needed for 3D.
    BUT can it put out the single of frame packing so my 3D projector picks it up as a 3D sources
    AND has any one done this with other apply hardware not including mac pro's
    Thank you

  • I just purchased the hunger games on blu-ray with digital copy. when I try to download the HD digital copy it gets to about 80% compete then stops with a download error (-50). What is that how do I fix?

    I just purchased the hunger games on blu-ray with digital copy. when I try to download the HD digital copy it gets to about 80% compete then stops with a download error (-50). What is that how do I fix?

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Best export format for encoding & burning Blu-ray with toast?

    Hi!
    Have a 1 hour and fifteen minutes program which I burn to Blu-Ray with Toast 10/HD. The problem is the time it takes, about 25 hours. Is this resonable really?
    Maybe it´s depending on the format I put out from Final Cut - H.264, 1920 x 1080 (1888 x 1062)Stereo (L R), 48,000 kHz
    Does anyone know if there is a better export setting in Final Cut to get the process work faster in Toast?
    Best / Urban

    I've never used toast to burn a BluRay however I have used encore and I export 10 bit uncompressed out of FCP and compress that. If your over an hour of program you'll have to scale back the data rate to make it fit, a 90 minute feature looks good content wise, but any text on it will show signs of the reduced data rate. the encode typically takes about 8 hours to build the disk image on an 8 core mac then about 45 minutes to burn from the image. I burn first to a rewritable in case of issues, then if it passes muster I'll burn the master

  • FCS3- working blue-ray with surround sound ?

    Hi, I'm trying to solve the problem with surround and Blue-ray.
    *Could anyone confirm that FCS3 can output working Blue-Ray with 5.1 Surround Sound, please?*
    The surround sound is really important for me, I am able to make Blue-ray now via Toast, but it converts the surround to stero). As soon someone confirms it works, I'm going to upgrade... Thanks!

    The only things I noted when I made my first own test, was that even though my FCP7 timeline was set properly to output the 6 channels, when I went to compressor 3.5 to produce both the H264 and the AC3 (with 6 channels), after the Blu ray disk was burnt, the audio was not playing correctly.
    I fixed the problem by going from FCP7 to Compressor using the new function called "send to compressor", instead of using a self contained QT movie (which is my usual workflow).
    In this specific case I found that it solved my problem and my second attempt to produce the Blu ray disk was ok, the audio played as expected on my Dolby receiver.
    Regards,
    Armando.

  • Jerky playback of Blu Ray with Encore CS4 and Mac

    I was very pleased by the fact that I created a Blu Ray disk on my first try...however, the footage plays back very jerky...almost like the frame rate dropped by half...I am using DVCPro 720p footage and compressing in two ways...1st did it in Media Encoder using the both 264 and mpeg 2 for blu-ray, and chose the proper format for 720p. Then I let Encore compress it using the automatic option...on all tries the video is playing back extremely jerky. I am also burning to re-writeable Blu Ray disks and playing back on PS3...anyone know what might be the problem?
    Thanks.
    Chad Campbell

    I did the same thing 720p 60p shot on a panasonic p2. I used final cut studio to co press to a mpeg-2 blu-ray stream and then build the blu-ray in encore cs4, it played back smoothly no dropping of frames or any other issues. That might solve your problems.
    I use a mac pro.

  • What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle?

    What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle? It's a old imac from 1997.

    I don't have original discs that it came with.
    Then you still can use the second option with the keyboard combo I posted, called "resetting the PRAM."
    Also when you way hold the c key down do you mean turn computer off and turn back on holding the c key?
    Yes, or you can simply restart. As you don't have the CDs, this isn't on the plate any more.
    The internal backup battery is not expensive and, in most iMacs is user-replacable. If yours has a tray-loading optical drive like this one:
    it takes a major teardown to replace the internal battery. If this is the case, you'd be better off to leave the computer plugged in all the time; that eliminates the main reason for having a working battery.
    If it has a slot-loading optical drive like this one:
    things are much easier. The battery is visible through the RAM access door on the bottom of the computer case. The manual:
    http://manuals.info.apple.com/en_US/iMacG3_2000UserManual.PDF
    has sketches of how to access the RAM and therefore the backup battery. Unfortunately, the pdf on the manual goes up sideways on-screen and the RAM instructions are pretty deep into the manual. It's probably easier to scroll (for a while) to the section on adding RAM and print the applicable pages.
    When you work on the battery, some sort of non-conductive pliers or large tweezer or forceps help unless you have tiny fingers. Make sure to note the polarity of the old battery and install the new one in the same orientation.
    The battery itself is readily available. If price is no oblect, you can get it for a small rasom from Radio Shack Store ("Tandy" outside the US) as part number 23-026.
    Online, they are dirt-cheap even after adding shipping. I buy backup batteries form this outfit:
    3.6v Newer Technology Lithium 1/2 AA PRAM Computer Clock Battery

  • I live in a home with two other people, and one housemate tried to sync up his content from iTunes and iCloud onto another housemate's new iPad. the iTunes library only contains my content. is there any way to retrieve the there person's iCloud?

    i live in a home with two other people, and one housemate tried to sync up his content from iTunes and iCloud onto another housemate's new iPad. the iTunes library only contains my content. is there any way to retrieve the other person's iCloud? Can they go out of my account? Their content is saved on their iPads, but can another iCloud be on the same home computer?

    The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
    https://discussions.apple.com/docs/DOC-3141

  • Develop mode shows a blue background with a white box and white diagonals.

    When I open the Develop mode the photo I selected is not displayed. Instead is a blue background with a white box and white diagonals. Can anyone help? Everything else appears to work. If  I choose the Before and After view the photo shows in the  Before but the blue screen in  the after.

    You should find the forum for whichever product this concerns and post your question(s) there.
    Here is a link to a page that has links to all Adobe forums...
    Forum links page: https://forums.adobe.com/welcome

Maybe you are looking for