If I change internet providers, how do I save mail and change settings?

I am going to have a representative from a different broadband service come over tomorrow and see if my house is within the area served by her company (Clearwire). If it is I plan to drop my satellite service and go with this, assuming it is faster. In case I do this, I realize there are a few things I need to know first that I hope someone here can help me with.
1. If I go with the new service provider, my email address will change. Does this mean that what is in my current mailbox (I have several folders with emails I have saved) will no longer be accessible? How do I backup what is in all the folders now in a way that I will be able to get into it with a different provider? (I have an external hard drive, but it is usb so cloning is not a possibility.)
2. If the new service works, I think I will have to make changes like DNS numbers and such. Hate to admit this, but I do not remember where to find and change these things.
3. What else might I be forgetting to think of that I need to know?
Thanks very much in advance for all advice and suggestions.

Do not change the settings for the existing account.
You should create a new account in Mail for the email account provided by Clearwire.
Before deleting the email account in Mail provided by your Satellite internet provider, create an "On My Mac" location mailbox - one for the account's Inbox mailbox and one for the account's Sent mailbox. Transfer messages from the Satellite account's Inbox and Sent mailbox to the user created "On My Mac" mailboxes. When completed, delete the Satellite provider's email account.
You shouldn't have to change anything with the new provider. I assume Clearwire provides an Ethernet modem and sends an installer to set up the equipment, etc.?

Similar Messages

  • Changing internet providers and need to change my address. Would like to use 3 apple addresses. How do I do this

    I'm unfamiliear with the proper terms, but I need to change internet providers and don't want to use the new provider's address. I understand that I can use an Apple address for 3 addresses. Help!

    Heard it in conversations. I'm tryinng to set up e-mail communications for my husband to his computer and 2 for myself (computer and phone) and also would like to use one  that's set aside for e-mail ordering, etc. so if my address is sold I won't get so much junk on my regular e-mail.

  • I have just changed internet providers from BT to Virgin, and now my iTunes doesn't show any of my airport express devices.

    I have just changed internet providers from BT to Virgin, and now my iTunes doesn't show any of my airport express devices.  I assume that I have to reconfigure them to the the new wireless but how do I do this frmo my PC?  Thanks

    I would recommend that you start by performing a "factory default" reset on each of your AirPort Express base stations. Once completed, you can use the following Apple Support article to configure each base station for streaming.

  • I changed internet providers and email accounts.  I have managed to set up a new Apple ID but my I-phone is not recognizing it.

    I recently changed internet providers and thus had to set up a new email account.  I managed to change my Apple ID but my I-phone 4S is not recognizing it.  It still brings up the old user ID.  I am also unable to retrieve Windows Mail (also wants old info)  I synced my phone.  What else can I do?

    cjm2004 wrote:
    ....  Do I have to set up a new apple id?
    No.
    Contact iTunes Customer Service and request assistance with your issue.
    Apple  Support  iTunes Store  Contact Us

  • I can't reconnect with my printer after changing internet providers

    I have a HP Photosmart D110. I changed internet providers and I can no longer print. I re did the web services on the printer but print jobs remain pending on the web page. I deleted and reentered the printer still no luck.
    Any solutions?

    Hi,
     I believe this printer is supposedly working wirelessly with your computer, right?! We need to reconfigure the printer using the new wireless settings since the printer is still configure using the old one. Simply run the installation disk then select reconfigure wireless, or you can go to START>PROGRAMS>HP>HP PHOTOSMART D110>and then ADD A DEVICE. Follow the prompts that will display on your computer screen, it may ask you to temporarily connect a usb cable from printer to computer to reconfgure.
    Kiko

  • How to reverse from quality and change the vendor account.

    I had made GR, but posted wrong entries, instead of doing one vendor account & i had made in other vendors account, this lot is passed by quality also that means it UD is also done.
    how to reverse from quality and change the vendor account.
    Thanks and Regards

    hi Raj,
    Reversing Stock Postings Locate the document in its SAP Library structure
       1. Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
    The initial screen for creating a goods receipt for a purchase order appears.
       2. In the field for the movement type, enter
       3. 102 (goods receipt for a purchase order into warehouse - reversal). In the field for the purchase order, enter the purchase order number for the original goods receipt.
    Note
    You can copy the purchase order number from the inspection lot.
       4. Choose Enter to display the selection screen for the purchase order items.
       5. Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
       6. Save the goods receipt and exit the Materials Management component.
       7. Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
    The initial screen for changing a usage decision appears.
       8. Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
       9. To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.

  • How can I save the jpg change the compression?

    how can I save the jpg change the compression fpr smaler files?

    Sorry, this can not be changed.
    You may want to change the image dimension.
    Thanks!

  • Urgent!! How to update Planning book and change when planning will start

    Hi Gurus,
                 I had configured the system and we can initilize planning area every month and my question is 
    1. How to update planning book and change planning start date every month?
    Thanks a Lot
    Regards,
    Raj

    Hi,
    In the planning book-dataview, you will assign the time bucket profile, and will be on rollling basis. if you want the forecast profile on rolling basis, maintain the forecast and history horizon as periods then that will also be on rolling basis.
    Regards,
    Raj

  • When opening a new tab, it opens onto a search engine, which is not what i want it to do. How do i resolve this and change it back to just a black page?

    when opening a new tab, it opens onto a search engine, which is not what i want it to do. How do i resolve this and change it back to just a black page?

    A new tab opens by default as a blank tab (about:blank).
    If that isn't the case then an extension has changed that behavior.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode

  • HT4623 Bought Iphone Off of craiglist and it is not an att product  the iphone had a gci sims card in it . How do i unlock phone and change carriers

    Bought Iphone Off of craiglist and it is not an att product  the iphone had a gci sims card in it . How do i unlock phone and change carriers

    You contact the carrier it is locked to.
    Unfortunately, if it's actually a GCI phone, they do not offer unlocking.

  • I've never made a rescue email, how do I make one and change my security questions

    I've never made a rescue email, how do I make one and change my security questions

    Click here for information. If you can't reset them through the method described in that article, contact the iTunes Store staff via the link in the 'Additional Information' section.
    It isn't possible to create a rescue email address without correctly answering two of the questions. Nobody on these boards can reset them for you.
    (95613)

  • HT201342 How do I change the 'Full Name' on my iCloud Mail (and on my Apple ID as I think this is where it gets the name)? Thanks

    How do I change the 'Full Name' on my iCloud Mail (and on my Apple ID as I think this is where it is getting my Full Name? Thanks

    To change it on and iOS device, go to Settings>Mail,Contacts,Calendars...tap your iCloud email account, tap you iCloud account at the top, tap Mail at the bottom, then enter the name you want to use in the Name field at the top.
    To change the From name on your Mac Mail, go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the top right and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done.  Then quit Mail on your Mac and re-open it.  Your new From name should now appear in the drop-down list when you compose a new email.

  • How do I use Migration Assistant to get my Mail and Keychain settings from

    How do I use Migration Assistant to get my Mail and Keychain settings from my Power Mac G5 2.3Ghz? I just purchased a new 2.5 MacBook Pro which will be delivered tomorrow, and I want to to know how to transfer Mail and Keychain?
    Thank You in advance for your reading and replying.
    Kindest Regards,
    Sebastian

    Rather than using Migration Assistant, which can cause trouble with the PPC to Intel change, simply boot the G5 in FireWire target disk mode and manually transfer the following:
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/com.apple.mail.plist
    You might want to look over Kappy's helpful guide for migrating, which covers the full process for a manual migration (including the above files).
    Hope this helps...

  • How to Configure E-mail and Chat functionalities

    Dear all,
    How to configure E-mail and Chat functionalities for IC Webclient.
    through IC Webclient ICI interface how can we configure E-mail functionality, As per my understanding, E-mails can be handled in a similar way of receiving phones.
    Where these E-mails can be stored?, Where we define agent E-mail id?
    being ICI is a multi channel support does it need SMPT server support? If No, would there be any difference in the functionality?
    How does CHAT functionality works?
    Please educate in above scenarios to get a better understanding.
    Your help will be highly appreciated.
    Best wishes
    Raghu ram

    Do you make any effort to search for your answers before you post your questions?  ERMS is the email response system
    The 2nd post on this board - Documentation for Interaction Center (IC) WebClient
    There is tons of stuff here to answer your questions as well as show you the configuration.  You need a 3rd party CTI solution to do chat that you will read about in the blog.
    SAP Notes
    759923 Frequently Asked Questions about IC WebClient
    940882 Frequently Asked Questions about ERMS
    882653 Frequently Asked Questions about Agent Inbox
    1114557 SAP CRM 2007 Internet Browser Releases
    1118231 Supported user interfaces for SAP CRM
    981710 Support for Microsoft Internet Explorer 7.0
    1144511 Blank screen when starting CRM WebClient or IC WebClient
    1115493 CRM Web UI: Mandatory SICF services for CRM framework
    992848 Mandatory ICF nodes for CRM WebClient UI Framework
    IC WebClient Consultant Cookbook for CRM 2005
    Online Documentation
    Online Knowledge Products
    Blog: How to Configure Contact Center Simulator User Interface (CCSUI)
    Blog: What is Computer Telephony Integration (CTI)

  • How can i save music and pictures so all users can access them?

    how can i save music and pictures so all users can access them?

    Hi, this should be your answer as for sharing music. For photos though, I would assume you can do the same thing. Hope it helps!
    http://support.apple.com/kb/ht1203

Maybe you are looking for

  • Photoshop CS 6 wont open

    Hi, I use CS6, as of today PS wont launch, all of the other CS apps are fine. No administrator issues. The only change I made that I am aware of is to delete two large PS temporary files that were stored on my disk. I'm using WIN 7 64. Thanks

  • Purchase Requisition Workflow - Organizational Plan required?

    Hi, We are implementing purchase requisition workflow. Based on what I have read, it says that the workflow table (table V_T16FW) and SAP HR-PA-OM (organizational plan) must be set up to support the solution.  Question:  If we are routing the workflo

  • MM Pricing Condition Type values in Condition Tab updation while CHANGE PO.

    Hi, The process of PO creation and PO change is through inbound IDOC posting. I created a PO with configured MM pricing procedure. While creating PO, the PO is created as required with different Condition Type value break-ups [PBXX, Discount, Surchar

  • Uploading in the server

    I have done the changes i need to the page, vo, AM in my local machine. now i need to copy them to the server to test. Can you please explain me what exactly i need to put in the server? .class, .xml files or anything else... Thanks a lot

  • How to supress top of page in ALV during page breaks...

    Hello Experts, I am currently developing a report using the old ALV(REUSE_ALV_LIST_DISPLAY) since I need to have page breaks(using the SORT event) depending on the sort criteria. But I noticed that for every page break, the top of page automatically