If I charge my laptop with 21V charger, does it affect the device. the original charger 18.5V
Product name is Compaq nx6310
if I charge my laptop with 21V charger, does it affect the device. the original charger 18.5V
This question was solved.
View Solution.
Hi,
I would not do this, the variance is acceptable around plus/minus 5%, in this case up to 13%.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
i just want it to connect to my itunes again!!!
Thank you to anyone and everyone that manages to help!Hello webster995,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Can i use my ipad while being charged or it is wrong?! I mean that does if affect the battery?!
Whenever you want. Will not affect the battery's life.
About Batteries in Modern Apple Laptops
Apple - Batteries - Notebooks
Extending the Life of Your Laptop Battery
Apple - Batteries
Determining Battery Cycle Count
Calibrating your computer's battery for best performance
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Battery University -
I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online. Is there a way to do this?
Hi John,
Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
Linda -
I have an iPad that was setup on a laptop that has been reimaged. The iPad then had a password put on it and my kid who doesn't rememer the password. Since I don't have the original laptop with iTunes installed I cannot reset the iPad to the factory default. Any suggestions on how to reset to the iPad?
Thank youTry recovery mode. I think this should work. You can read the instructions here.
http://support.apple.com/kb/ht4097 -
I have a Window 7 HP laptop. I want to install Snow Leopard on an external hard drive as the memory space on my laptop is very less. I have the original snow leopard disc and I think it's a retail version . Please guide me through the installation in details. Can you also please let me know about this boot camp.
You cannot. From a legal standpoint, the license agreement for OS X mandates that you run OS X only on Apple hardware. HP is not (yet) owned by Apple.
From a technical standpoint, your HP laptop doesn't use EFI, but rather an early predecessor called a BIOS. Apple is the only vendor of consumer computer hardware that uses EFI; other vendors reserve EFI for use in servers.
Secondly, Apple's operating systems support a rather limited number of configurations of video hardware and mainboard chipsets directly since they need only support those systems that they manufacture. You cannot use Windows software or drivers on OS X, so prior to installation, you would need to write your own hardware drivers for your laptop, create an OS X drive image on a Mac, and then modify that image with your drivers before putting it in the HP.
It will be simpler (and legal), to simply purchase a used Mac. Apple's online store has refurbished MacBook Airs starting at $850 and Mac Minis for $700. If you go to e-bay or craigslist, you'll find used Macs for considerably less. -
I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. There's only a few things that could be my passcode, but because it disables for an hour, it is time consuming trying to figure it out. What do I do? I do not care about having to erase everything since it's new and there's nothing on it, but it was never synced with iTunes.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
The located assembly's manifest definition with name 'openfoundation' does not match the assembly re
Ok. been working on this for the better part of a day. I am having trouble with the .net web controls. trying to create a simple portlet that populates a text box with values from a 2nd text box when a button is selected. both text boxes are in the same portlet.
without using the <httpModules> entry in the web.config file the portlet works fine, but it does pop you out of the portal.
setup: working in a Dev. environment with portal and portlets on the same box.Portal version is 5.0.2.EDK version is 5.0.2.
error:
The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.Assembly Load Trace:The following information can be helpful to determine why the assembly 'openfoundation' could not be loaded.=== Pre-bind state information ===
LOG: DisplayName = openfoundation, Version=2.0.9.3152, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
(Fully-specified)
LOG: Appbase = file:///c:/inetpub/wwwroot/netTest
LOG: Initial PrivatePath = bin
Calling assembly : dotnetportlet, Version=3.5.0.1, Culture=neutral, PublicKeyToken=null.
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file (C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from C:\WINNT\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: openfoundation, Version=2.0.9.3152, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/nettest/9e6689f5/a0d2f067/openfoundation.DLL.
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/nettest/9e6689f5/a0d2f067/openfoundation/openfoundation.DLL.
LOG: Attempting download of new URL file:///c:/inetpub/wwwroot/netTest/bin/openfoundation.DLL.
WRN: Comparing the assembly name resulted in the mismatch: Minor Version
Stack Trace:[FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.]
Plumtree.Remote.Portlet.PortletContextFactory.CreatePortletContext(HttpRequest req, HttpResponse resp) +0
Com.Plumtree.Remote.Transformer.Condition.GatewayedStandardCondition.UseFilter(HttpContext ctx)
Com.Plumtree.Remote.Transformer.FilterManager.UpdateFilter(HttpContext ctx)
Com.Plumtree.Remote.Transformer.PTTransformer.BeginRequestHandler(Object sender, EventArgs e)
System.Web.SyncEventExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute() +60
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.947
************************************************************Is there any step by step instructions for setting up and using the .net web controls in Plumtree????
There doesn't seem to be any information in one spot as to setting up the environment to use the .Net Web Controls. I have had to piece together information from multipule threads to get this far. I.E. there was nothing in any documentation that I have read that required the installation of the VJ# lib's. (that error took me the first half of the day to resolve :-) )
Thanks for any help,
Greg************************************************************Also, when reviewing the Plumtree_.NET_Web_Controls_InstallLog.log there were 5 nonfatal erros. These error's were:
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll (The process cannot access the file because it is being used by another process)
When installing the Web Control's do you need to stop any services? I didn't see anything in the install notes about doing this? -
Are there known issues concerning double clicking in FF? We found bug 542068. Most of the issue we found have to do with Flash. Does it affect other applications (JSP/Javascript) too?
If there is a pattern of the application working up to Firefox 3.6.3 and not working starting with Firefox 3.6.4, there could be a problem with trying to communicate events between firefox.exe (which hosts pages) and plugin-container.exe (which hosts some plugins). You can tweak your settings to force plugins to run in firefox.exe to see whether this is the problem. This article has some background information on that:
http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
''Do you know if there are problems with Firefox 3.6 when you double click in a JSP/JAVA/Javascript application?''
No, I don't know. Obviously I can't read every post here, but I haven't read about it before.
Is it a stupid question to ask: why does that matter?? To fix the application to work in Firefox 3.6 and above, we need to see a page that works on other browsers and fails in Firefox. It doesn't need to be the whole application, just enough to demonstrate the problem so that if we solve it, then you can apply that learning back to your application. -
Pretzel: The located assembly's manifest definition with name 'openfoundation' does not match the
We have got 5.0.2 Plumtree portal, EDK 5.0.2 and .Net Web Controls 2.1.
I am trying to call:
IPortletContext oPortletContext = PortletContextFactory.CreatePortletContext(System.Web.HttpContext.Current.Request, System.Web.HttpContext.Current.Response);
I have attached the error I am getting. Is this related to Open Foundation version? This is quite urgent because we are in the process of trying to get a demo together for grabbing Activity Rights.
Server Error in '/portlets/DOJ/JNET/pretzel.clients.doj.reentry' Application.
The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.Assembly Load Trace:The following information can be helpful to determine why the assembly 'openfoundation' could not be loaded.=== Pre-bind state information ===
LOG: DisplayName = openfoundation, Version=2.0.9.8318, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
(Fully-specified)
LOG: Appbase = file:///E:/Data/HSTPRDAPP01/Inetpub/plumtree/portlets/DOJ/JNET/pretzel.clients.doj.reentry
LOG: Initial PrivatePath = bin
Calling assembly : dotnetportlet, Version=3.5.0.1, Culture=neutral, PublicKeyToken=null.
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file (C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from C:\WINNT\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: openfoundation, Version=2.0.9.8318, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/portlets_doj_jnet_pretzel.clients.doj.reentry/26128f6f/cfc1837a/openfoundation.DLL.
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/portlets_doj_jnet_pretzel.clients.doj.reentry/26128f6f/cfc1837a/openfoundation/openfoundation.DLL.
LOG: Attempting download of new URL file:///E:/Data/HSTPRDAPP01/Inetpub/plumtree/portlets/DOJ/JNET/pretzel.clients.doj.reentry/bin/openfoundation.DLL.
WRN: Comparing the assembly name resulted in the mismatch: Minor Version
Stack Trace:[FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.]
Plumtree.Remote.Portlet.PortletContextFactory.CreatePortletContext(HttpRequest req, HttpResponse resp) +0
pretzel.clients.doj.reentry.navigation.Page_Load(Object sender, EventArgs e) in \\devnet2\inetpub\doj\reentry\development\pretzel.clients.doj.reentry\navigation.aspx.cs:22
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +750
Version Information: Microsoft .NET Framework Version:1.1.4322.1031; ASP.NET Version:1.1.4322.947I have seen this before after a upgrade of the EDK, found I had to remove the reference in the C# project to the old EDK dll and re add it to the new EDK dll.
Also noticed that you are using the System.Web.HttpContext.Current fully qualified namespace in the CreatePortletContext() call instead of the usual way of PortletContextFactory.CreatePortletContext(Request, Response) this uses the System.Web.HttpRequest.Page namespace by default. -
I have miny iPad that I restored ,i can not do any thing with it just because iam not the original owner, went to apple trying to do something , they could not help,look like apple is trying hard to make me trash my all devises.thanks apple
Sounds like you bought the iPad secondhand and the previous owner did not remove it from his/her iCloud account.
If you are unable to contact the original owner, the iPad is (unfortunately) useless to you.
~Lyssa -
I have synced an iPhone 4S with iCloud - I now have a 5C to replace it. What happens to my data when I retire the 4S - does it need the original device to save my data?
Welcome to the Apple community.
Once you have restored your new phone from the backup of your old phone and ensured that everything is working correctly, you should first turn off "find my phone" on the old phone and then erase it, before you get rid of it. -
i bought iphone 4s from us and upgrade it to IOS 5.01 and i cannot activate with etisalat sim as it requires the original carrier sim
The unlocked iPhone 4S did not go on sale in the US until 11/11, and then only through Apple.com in the US.
I don't know if it's available at retail yet, but I don't believe it is.
As you've been told, you purchase a phone locked to AT&T. You can NOT activate it or use it on any other network. AT&T does not unlock iPhones for any reason. Return it to the store you bought it from and get your money back. -
When I send an imessage with wifi it sends it from the original number I got with the phone before I ported my number over. When I send an imessage on the network it comes from my own ported number. How do I change the imessage so that it comes from my own ported number?
Yeah send it from your phone.
Your computer has no knowledge of your phones phone number, it is not a phone. -
New laptop with Windows 8 does not recognize my Playbook. I had it working before on Windows 7.
I have had my Playbook connected in the past and was able to transfer files with the WIFi switched off. On my new laptop with Windows 8 there is no recognition in "Computer" and Blackberry Desktop Software shows no connection.
Is this a Windows 8 problem?See:
http://support.apple.com/kb/TS3716
If you need further help, post in the iPod Nano forum. This is the iPod touch forum. They use different drivers.
Maybe you are looking for
-
I just got my first apple tv. It streams netflix beautifully and connected to my network and computer quickly. Currently the bulk of my itunes library is on a PC, so I am attempting to stream from that. I can watch a show or an episode of a tv sho
-
Airtunes audio drop out solution that worked for me! :)
setup is DSL modem, AEBS main base station (software v5.6), AE (software v6.2), AE is in WDS mode as a remote base station. I am running OSX 10.4.3, and all software (itunes, etc) is updated current as of 6Nov2005. using airport admin utility, i set
-
Could not purchase. A duplicate file name was sepcified.
I keep getting an error whenever I try to buy anything through the iTunes store. This has been happening ever since I had my optical drive replaced, on top of some other problems with burning as well. Any idea how to fix this?
-
Unknown PT XML tag 'gatewaylink
Hi, I'm trying to use the gatewayLink tag within my code but it keeps returning 'unknown PT XML tag 'gatewaylink'. I have used the pt:URL tag before so i know that works on the current plumtree portal build we are using (5.04 and edk 2.2) and i have
-
What are AL11 files and logical files
what are AL11 files and logical files