If I choose any i-works draft, I only can get one page not the complete draft

Mousing shows all the available pre-formatted page available in each template to give you an idea what is there, but you only get one, sometimes 2, when you create a new document. All of the other pages can be accessed via the Insert menu. Insert > Sections in word processing & Insert > Pages in page layout.
If they all loaded when you opened a template, you'd have to go through & delete the ones you don't want & duplicate the ones you want more than one of.
FYI: the name of the program is iWork, no 's' & no hyphen

Similar Messages

In firefox, whenever i have my mouse over the page (not the toolbar section), any selection i have moves. For example - a text entry box and the cursor keeps returning to the start of the box. This is only in firefox, everything else works fine (IE and Ch

I have an issue with FF. Whenever I have my mouse on the page (not the toolbar area) any selection I make gets altered in the following way:-
Text boxes - The cursor keeps moving to the left.
"Radio" buttons - Selection keeps moving up.
This is only happening in FF, I am not seeing this behaviour in Chrome or IE.
== This happened ==
Every time Firefox opened

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

Ntenich,
If your table has a Header and your Legend text is in the header, it will be picked up by the table.
Jerry

I keep getting a pop-up WEBKIT 2 WEB PROCESS.exe has stopped working and then I can't do anything -- any suggestions as to how I can get rid of this one?

I keep getting a pop-up WEBKIT 2 WEB PROCESS.exe has stopped working and then I can't do anything -- any suggestions as to how I can get rid of this one?
but i using safari on windows7.

Uninstall Safari and reinstall:
Safari 5.1.7 for Windows - Support - Apple
If this doesn't work, I suggest migrating to a different browser given that: Farewell Windows Safari, as Apple excludes its homegrown browser ...

In the latest two updates you can only go back one page at a time, previous versions allowed you to jump back several pages by choosing from the twistie - any suggestions?

In the latest two updates you can only go back one page at a time, previous versions allowed you to jump back several pages by choosing from the twistie - any suggestions?

The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4 and later.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

When I use Explored, ussually I diplay my pages in english, but Explore has a feature that you can point any word and it is translated from english to spanish (one one word at the time, not the complete page), does it is available in firefox?

When I use Explored, usually I display my pages in English, but Explore has a feature that you can point any word and it is translated from English to Spanish (one one word at the time, not the complete page), does it is available in Firefox?

I do not know the answer but if you look through the Add-ons under [https://addons.mozilla.org/en-US/firefox/search/?q=translation translate] you may find something suitable. There is of course also the well known Google translate [http://translate.google.com/#es|en|choose%20the%20language%20combinations%2C%20and%20can%20handle%20single%20words%0Awith%20some%20odd%20results service]

I recently changed from a Mac Pro to an iMac. A large chunk of emails have disappeared. Time Machine is no help. Any ideas as to how I can get them back?

I recently changed from a Mac Pro to an iMac. Despite using Migration Assistant, a large chunk of my recent emails and nearly all of my wife's emails have disappeared in transit. Strangely, emails from my distant past are still there. Time Machine is no help; the messages may be on my backup disc but they're behind an invisible icon. Any ideas as to how I can get them back?

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the text on the line below to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

TS3274 After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

Hi Midnightbrat,
Welcome to the Support Communities!
The troubleshooting steps for the camera on the iPad are similar to the iPhone: I've highlighted the pertinent steps below:
Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
Try turning the iPad off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try switching between the front and the back cameras to verify if the issue persists on both.
I hope this information helps ....
Have a great day!
- Judy

When downing an app on 3gs phone it says invalid address . worked one day not the next

When trying to download apps on 3gs phone it says invalid address . It worked one day not the next day . Any help would be greatly appreciated. Thanks

Hi Roger,
Welcome to the Apple Dicsussion Pages.
The Alcatel Speedtouch 585 proabably has version 5 firmware on there. I see form your post you know what the problem is.
This can be the problem.
Earlier modes in the 500 series had Firmware versions 3 and 4 which meant you could telnet into them form the Terminal Application and Unbind SIP from port 5060.
This is what is causing the problem.
The symptoms are a starnge pattern of succss and failure.
A small group you can contact all the time
An equally small group of now and then success
And a large group of Buddies that you can never get AV chats with.
ibosie who posts here says he has been in caontact with Alcatel and that they are working on a Firmware update to get round this.
At this stage another modem would be the way to go. (the 510 and the 580 can be Unbound)
Ralph

I spilled some sugary liquid on my Macbook keyboard, I can mirror this computer with another mac and it works find but I can't see anything on the macbook monitor. Help, please!

I spilled some sugary liquid on my Macbook keyboard, I can mirror this computer with another mac and it works find but I can't see anything on the macbook monitor. Help, please!

There really isn't any workaround to the cost. You can't get the parts needed to fix it yourself. Only Apple has those parts and they do not sell them to end users.
Sure you could take it apart and clean everything and the screen might start working again but then it might not. Depending on what cause it to stop working in the first place. Like something got shorted out.
mike1206 wrote:
Apple wants 1,200 dollars to fix. I'm trying to work around that cost.

HT4356 I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc. How do I print just 1 page out of 14 pages . I don't see any settings on my iPod and can't find settings on the printer . Can someone help with this

I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc.
How do I print just 1 page out of 14 pages .
I don't see any settings on my iPod and can't find settings on the printer .
Can someone help with this problem

Google show that you have to cut what you want to print and then paste it into a new app and print from that app.
http://www.ipadforums.net/new-member-introductions-site-assistance/63145-printin g-one-page-ipad-2-a.html

TS3406 magic jack is not working properly. I can call out and hear the person i have called, but they can't hear me.

My Magic Jack is not working properly. I can make a call and the person I have called can hear me but I can't hear them. What can I do to fix this?

if it play not sound at all then it's likely the hardware issue where the headset detector gets stuck
like this the detector just is stuck in the opposite way
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more
iphone stuck in headphone mode

Is there any way to an index that can be used to include the "OR condition "?

Hello I have some questions.
The test was conducted in the following procedure .
create table test
c1 varchar2(10),
c2 varchar2(10),
primary key(c1)
create index test_idx1 on test(c2);
Command> explain select * from test where c1 = 'AAAAAAAAAA' or c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP:                1
LEVEL:               1
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST
INDEXED CONDITION:   <NULL>
NOT INDEXED:         TEST.C2 = 'AAAAAAAAAA' OR TEST.C1 = 'AAAAAAAAAA'
Command>
Command> explain select * from test where c1 = 'AAAAAAAAAA' and c2 = 'AAAAAAAAAA'
Query Optimizer Plan:
STEP:                1
LEVEL:               1
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST
INDEXED CONDITION:   TEST.C1 = 'AAAAAAAAAA'
NOT INDEXED:         TEST.C2 = 'AAAAAAAAAA'
Command>
By including the "OR condition " in this test does not use the index.
Is there any way to an index that can be used to include the "OR condition "?
Thanks.
GooGyum.

A database cannot in general use indexes in this way for an 'or' involving two different columns. However, for this specific example one can easily rewrite the query using 'UNION' to use the relevant indexes while still giving the same (correct) result:
Command> explain select * from test t1 where t1.c1 = 'AAAAAAAAAA' union select * from test t2 where t2.c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP:                1
LEVEL:               1
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST
INDEXED CONDITION:   T1.C1 = 'AAAAAAAAAA'
NOT INDEXED:         <NULL>
STEP:                2
LEVEL:               2
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST_IDX2
INDEXED CONDITION:   T2.C2 = 'AAAAAAAAAA'
NOT INDEXED:         <NULL>
STEP:                3
LEVEL:               1
OPERATION:           OrderBy
TBLNAME:             <NULL>
IXNAME:              <NULL>
INDEXED CONDITION:   <NULL>
NOT INDEXED:         <NULL>
STEP:                4
LEVEL:               2
OPERATION:           UnionMergeSort
TBLNAME:             <NULL>
IXNAME:              <NULL>
INDEXED CONDITION:   <NULL>
NOT INDEXED:         <NULL>
Maybe you can apply a similar trick? If you know there is no possibility of duplicate rows then you can further optimise this (in terms of performance) by using UNION ALL.
Chris

I am getting a 404 error when trying to access any search link using google, I can get to a website if I enter the url directly. I have cleared my history, emptied the cache and reset safari.

I keep getting a 404 error when trying to access any search link using google, I can get to a website by directly using the URL. I have cleared history, empited the cache and reset safari. Any suggestions.

Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

When I download an excel spread sheet from a Ford web site I seem to be getting code and not the work sheet. Example- MIME-Version: 1.0 X-Document-Type: Workbook Content-Type: multipart/related; boundary="====Boundary===="

I have a Macbook Air. I have MS office installed and work in Excel often with no issues. But When I download an excel spread sheet from a Ford web site I seem to be getting code and not the work sheet.
Example-
MIME-Version: 1.0
X-Document-Type: Workbook
Content-Type: multipart/related; boundary="====Boundary===="
--====Boundary====
Content-Location: file:///C:/HOLD.XHT
Content-Transfer-Encoding: 8bit
Content-Type: text/html; charset="utf-8"
<html xmlns:v="urn:schemas-microsoft-com:vml"
xmlns:o="urn:schemas-microsoft-com:office:office"
xmlns:x="urn:schemas-microsoft-com:office:excel"
xmlns="http://www.w3.org/TR/REC-html40">
<HEAD>
<meta name="Excel Workbook Frameset">
<xml>
<x:ExcelWorkbook>
<x:ExcelWorksheets>
   <x:ExcelWorksheet>
    <x:Name>BTB</x:Name>
    <x:WorksheetSource HRef="./IBIT0001.xht"/>
   </x:ExcelWorksheet>
   <x:ExcelWorksheet>
    <x:Name>GSM</x:Name>
    <x:WorksheetSource HRef="./IBIT0002.xht"/>
   </x:ExcelWorksheet>
   <x:ExcelWorksheet>
    <x:Name>RODetail</x:Name>
    <x:WorksheetSource HRef="./IBIT0003.xht"/>
   </x:ExcelWorksheet>
</x:ExcelWorksheets>
</x:ExcelWorkbook>
</xml>
</HEAD>
</HTML>
--====Boundary====
Content-Location: file:///C:/IBIT0001.xht
Content-Transfer-Encoding: 8bit
Content-Type: text/html; charset="utf-8"
<html xmlns:v="urn:schemas-microsoft-com:vml"
xmlns:o="urn:schemas-microsoft-com:office:office"
xmlns:x="urn:schemas-microsoft-com:office:excel"
xmlns="http://www.w3.org/TR/REC-html40">
<HEAD>
<meta http-equiv=Content-Type content="text/html; charset=utf-8">
<style>
<!--table
        {mso-displayed-decimal-separator:"\.";
        mso-displayed-thousand-separator:"\,";}
@page
        {margin:1.0in .75in 1.0in .75in;
        mso-header-margin:.5in;
        mso-footer-margin:.5in;
        mso-page-orientation:landscape;}
tr
        {mso-height-source:auto;}
col
        {mso-width-source:auto;}
br
        {mso-data-placement:same-cell;}
.style21
        {color:blue;
        font-size:10.0pt;
        font-weight:400;
        font-style:normal;
        text-decoration:underline;
        text-underline-style:single;
        font-family:Arial;

Try search/ask in the forum devoted entirely to Excel issues:
http://answers.microsoft.com/en-us/mac/forum/macexcel

If I choose any i-works draft, I only can get one page not the complete draft

Similar Messages

Maybe you are looking for