If i connect with led to recharge battery there is any problem in the iphone 5
if i connect with led to recharge battery there is any problem in the iphone 5
No idea what you mean by "connect with led".
Similar Messages
-
I dropped my iphone 3gs now it goes on when connected with a charger but battery show 0% battery. as soon as i disconnect the charger the phone goes off....
Your the one saying it won't work properly, so yes it is broken.
-
The full message said:
There was a problem downloading the software for the iPhone "Judy's iPhone 4". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later.
I am trying to update the iPhone for my grandmother, Judy, as I am leaving for Paris on Wednesday night and we want to have Facetime installed on her iPhone before then, so we can stay in contact with each other. It is the simplest way for this to happen but the program simply will not allow me to update her iPhone.
Is there any way to get past this error and update her iPhone? Any help will be greatly appreciated.Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
Hi there, i'm new to the iPHONE community and please can someone tell me how to backup my phone to iCLOUD. How do i connect with wi-fi. Must i buy a wi-fi connetion or what.Thank you kind regards
Do you have a wi-fi network in your home ? If you do then you should be able to connect your phone to it via Settings > Wi-Fi on your phone - that should show any networks that are available, and tapping on the network that you want to use (and typing in its password if it's password protected) should connect the phone to it. If you don't have a wi-fi network then yes, you will need wifi router in your home, which is connected to the internet (e.g. via your phone line) to be able to back up your phone to iCloud.
Connecting to wifi : http://support.apple.com/kb/HT5569 (the screenshots on that page are from iOS 7, but they should be similar on iOS 6)
iCloud backup and storage overview : http://support.apple.com/kb/PH12519
You can also backup your phone to your computer's iTunes : http://support.apple.com/kb/HT1766 -
My ipod is no longer connected with my mac air and I wish to transfer all the music from my ipod back to my computer. What should I do?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
or
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities -
My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.
My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.
-
I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!
RESET YOUR ROUTER
No. Reset your router. -
"There was a problem downloading the software fot the iphone. The network connection timed out."
there's no pblm with my connection but this error keeps on showing,
what to do? please help....Stop with the silly and pointless fonts.
A simple search of the forums for the actual error would have revealed the resolution.
Temporarily disable all security software on the computer. -
I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?
Morning Gjakleinmark,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario -
when i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this option. Please give me some solution.
Your iPhone can take multiple calls. If you answer your phone from one person or call someone and another call comes into you, you will hear a beep and if you pull your phone away from your ear, you will see that you can hang up the call with the 1st person or answer the 2nd call and then swap between the two.
I have no idea what you mean by you calling someone who is already talking to someone. I've never been able to see on my iPhone that someone I'm calling is already talking to someone else. -
I need a request code for offline activation. Because i cannot connect with adobe server for online activation. But I receive "The request code is invalid." by generate answer code.
Dear Anubha,
I hope these windows illustrate what I am facing.
The above window shows the prompt that the software requires activation.
The version is 8.1.0.
This next window is the point where I select activation by phone.
This final window shows that the "response code" is not returned. I get an
"Activation Number" instead.
Steven
On Tue, Jan 27, 2015 at 10:50 PM, Anubha Goel <[email protected]> -
s there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?
Sometimes i sleep and the my iphone is charging and of course the battery became full after two or three hours, and definitely i will not wake up in the midnight to just disconnect the charger, please i need your help.This is considered normal use. I think everybody does this, including myself. It's not something to worry about in the least bit.
Just remember to complete a full charge cycle (allow the phone's battery to discharge to 10%-20%, then charge uninterruped to 100%) once a month and you'll be fine.
http://www.apple.com/batteries/iphone.html -
My network symbol keeps working on my home page even when I'm not doing anything, I know there has been problems in the past with this so has it come back, help it's killing my battery!
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
iTunes could not connect to the iPhone “Rasmus's iPhone” because it is locked with a passcode. You must enter your passcode on the iPhone before it can be used with iTunes. - Why is that?
iTunes is asking you to provide the passcode that was created when the device was activated.
You are able to get around the passcode if you know the apple id login and password and are able to restore the device back to default settings.
See this article for further directions:
http://support.apple.com/kb/HT1212
good luck. -
I do not know why, but I can not go to the App Store! before I went there without any problems but now I can not connect with App Store
Open the Finder. From the Finder menu bar click Finder > Go > Go to Folder
Type or copy/paste: ~/Library/Cookies
Click Go then move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Try the App Store.
Maybe you are looking for
-
External HDS/HLS storage: Invoking files stored on an external drive.
Followed the following article to add an external drive to store our vod streams (article is no longer available): http://help.adobe.com/en_US/flashmediaserver/devguide/WS0432746db30523c21e63e3d12eea2a8fc0 -8000.html#WS0432746db30523c21e63e3d12eea2a8
-
Downloaded epson update... now not printer
I recently downloaded an pdate for y Epson NX200 as suggested on my Mac software updates. Now, my printer which used to work fine will no longer print and get an error message. Anyway to remove the update?
-
PSE13 Organizer: stacks and version sets do not expand
Converted three catalogs from PSE12 show the stacks/versions sets overlay symbols in organizer but there seems to be no way to expand the stack/version set. All the menu choices for doing this are disabled. Anybody else seeing this? Any workaround? A
-
Hey everyone, I am trying to insert a pre-built animation on a slide, but it's not playing when I preview the course. I have used them in the past and everything worked fine, but for some reason they won't play when I insert them. I played around wit
-
I somehow managed to place a number of .m4a and .m4p files on my desktop. When I try to delete them by moving them to trash I am not allowed to do so. Message says they cannot be deleted. How do I rid my desktop of them?