If I create a document in pages 5.5 can I share it with someone who is running the previous version?

I have upgraded to Yosemite and to Pages 5.5.  Now, it appears that every time I edit a Pages document using my new 5.5 version, that document cannot be opened by any of my colleagues who have not yet updated their OS and Pages software.  Is this correct?  If so, is there any way to save it as the previous version?

A file format that is perpetually churned and incompatible with everything else?
You do realise Apple is going to keep on doing this to you?
All for something that is essentially crippled.
Peter

Similar Messages

  • I have created a .m4v file from iPhoto and would like to share it with someone else knowing that the file is quiet large (86 Mo), i used to share file with mobileme, how Can I do that with iCloud ? or another way....

    In iphoto, I have create a diaporama which I exported to itunes as a m4v file. I would like to share this file with someone but it is too big to send it via email (84 Mo). This file is now in my films in itunes. Is there a way to share it via icloud.
    I used to share files using mobileme which I cannot use anymore.
    Thanks for your help,
    Eric

    How recently did you switch?  If it's less than 60 days, then Verizon simply reinstates your previous account.  The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices.  I'm not sure how it will go - but since you are still being billed for the devices... 

  • Why can't I swipe with two fingers to show the previous page like in Safari

    When I want to go to the previous page I can't do so by swiping two fingers to the right like I can in Safari with the new Lion operating system. I would like to set firefox to have this feature since it is very helpful in my work.

    I could not see this as well when I tried to post a link . It just shows the preview of the page. Facebook did not have this feature either.

  • I created a document in Pages. How can I get it published in a book format?

    Looking to get my document formated into book form. Pictures and text have been created in Pages. Any advice in how to create a book from this document?

    Speak to either your printer or publisher. Ask what their requirements are.
    I think neither will be happy with Pages documents.
    Exported .pdfs from Pages are not suitable for commercial output either.
    Peter

  • Hi if I created a document on pages would somebody with mircosoft word be able to open it and read it

    Hi if I created a document on pages would I be able to send it somebody who has mircosoft word

    Mark,
    Pages documents can only be opened on a Mac, or on an iOS device. If you want your Wndows computer-using friends to be able to see your work created in Pages you must Export your Pages document to either PDF or Word format.
    Jerry

  • Hi, I upgraded my girlfriend's iPad 2 using my iMac, however, her iPad was sync with her PC. Although I've made backup earlier, when I restore from backup the apps doesn't sync back, neither her documents on pages. How can I put then back to her iPad?

    Hi, I upgraded my girlfriend's iPad 2 using my iMac, however, her iPad was sync with her PC. Although I've made backup earlier, when I restore from backup the apps doesn't sync back, neither her documents on pages. How can I put then back to her iPad?

    The backup saves many settings, but it copies photos and other files from the computer back to the iPad after IOS5 wipes the disk.   Plugging it into her computer will re-sync it.

  • I am using Pages 4.3. I created a Document using Pages 4.3 that is 280 MB (it is 350 pages long). Will I be able to open it in Pages 5.0?

    I am using Pages 4.3. I created a Document using Pages 4.3 that is 280 MB (it is 350 pages long). Will I be able to open it in Pages 5.0?

    Hi,
    WARNING
    it´s impossible (for me) to open Pages 5 documents in Pages 4, which is absolutely no go. You can open any f..... word.doc but no pages 4.
    Apple is getting worser every day, it´s a shame. There is no information about this before you buy it.
    So now you have to ask your friends or colleagues to convert a pages 5 document to a word document, so you can open it with pages 4. Hoiw ridiculous is that?
    Pages 5 is a joke. In 5.0 they forgot to manage the task-bar, which came shortly after 4 weeks or so in 5.1.
    The only good: you can run ist parallelly to pages 4.3 but it´s not worth the money.
    APPLE MAKE A  BETTER JOB

  • I created a document in Pages 5.2, emailed it to someone, who emailed it back with changes, but I cannot open it now. Why?

    I created a document in Pages 5.2.  I emailed this document to a friend through gmail in Safari.  My friend made changes and emailed it back to me.  When I click to download the document, Pages tells me it cannot open it.  I have created 4 documents like this and each one has had the same problem when emailed back to me.  Why?

    If you are also using Pages, but version 5.2, then I'm not sure how they read it if they are using 4.3. But for the two of you not to have problems you need to use the same version of Pages because as OS X has changed from Lion to Mountain Lion to Mavericks to Yosemite Apple has changed the version of Pages, but each version of Pages is not fully downward compatible.
    If they cannot upgrade OS X in order to use the Yosemite version of Pages that you use, then you should use Word documents. They should be able to Import/Read a Word document as well as Save or Export in Word format. Of course, they could just start using Office for OS X 2011 which would make things better all around.

  • I create a document in pages and then export it as doc or docx file. I then email or place the file in a drop box. When another computer opens the doc or docx the photos in the document are randomly scattered. What is the solution?

    I create a document in pages with photos. I then save it and I also export it as a doc or docx file. I then email or place in a drop box the doc or docx file. The other computer opens the file in Microsoft word and the text remains in place but the photos are randomly scattered throughout the document. What is going wrong? How do I correct this problem? I really don't want to go back to a Microsoft machine.

    That assumes two things:
    1. That Apple would have let Microsoft have access to its file format.
    2. That Microsoft would want to spend the time and trouble to write filters for file formats that Apple can't be bothered doing for its own software.
    Peter

  • Ive created a document into Pages which I want to upload into MailChimp for a email marketing campaign.  However, Mailchimp seems to dislike the document. Any ideas?!

    I've created a document in Pages which I want to use as an upload in a email marketing campaign I'm running through Mailchimp.  Mailchimp doesn't seem to like the Pages document and won't upload.  Any ideas?!

    When you contacted the folks at mailchimp what did they have to say?

  • Free trial version of Illustrator - created a document - and no one else can open

    I download a Free trial version of Illustrator - created a document - and no one else can open as an illustrator file (extension .ai) and edit.  They have CS6 version 16 - it tells them that it was created in a newer version.  They are only able to open individual pages as .pdf.

    vanoevsa,
    File>Save As then choose the version in the dropdown list (CS6).

  • Trying to print a document from Pages, when I go to print it won't let me select the document.  It is grey and I can't click it.  What should I do?

    Trying to print a document from Pages, when I go to print it won't let me select the document.  It is grey and I can't click it.  What should I do?

    I'm not clear on how you're trying to print. When you select Print from the file menu in Pages the current document is already selected. Perhaps you need to show the details in the print dialog. The first screenshot is from Mountain Lion the second from an earlier OS where you click the blue down-facing triangle button (sorry, I can't remember which one).

  • I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version.  How can I have the header and footer included when I open a template?

    I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version.  How can I have the header and footer included when I open a template?

    That is becuase Pages 5.1 has numerous unnounced surprises for the unwary user.  Among the surprises:
    - it strips out images from headers and footers without warning
    - it strips out bookmarks without wanring (yes, all those bookamrks you laboriously put into a document: poof! Gone.)
    - it strips out alternating left/right margins, without warning.
    There are many more suprises, as you'll see from glancing through these discussions. They fall into two main categories: things that are present in version 4.3 but that are missing in 5.1, things like
    -mail merge
    -meaningful Applescript/Services support
    -non-contiguous text selection
    -ability to set defaul zoom
    -ability to see comments while editing
    -ability to print comments
    -ability to read RTF files
    -ability to drag in hyperlinked ted from a browser
    These about about 90 other features are gone.
    Then there are the bugs.  Hyperlinks do not reliably export to a PDF file any longer. There have been multiple problems with printing report. Some fonts place stray characters in the headers.  Many reports of the program crashing, courrupting files, etc.
    Fortunately for you, the previous version of Pages is still on your system.  Export any documents you may have created or edited with Pages 5.1 (another great surprise: files created with version 5.1 cannot be read by any previous version of Pages: not just 4.3 but even 5.01!).  Then trash 5.1 and use 4.3 until (unless?) it is stable and has a reasonably robust feature set.

  • IF_IXML : How can i add encoding with value UTF-8 to the document object??

    Hi
    i want to create a xml file with the following content:
    <?xml version="1.0" encoding="UTF-8"?>
    <OpenSearchDescription xmlns="http://...."> 
    </OpenSearchDescription>
    i did this with the if_ixml interface and rendered the content in a file 'D:\usr\sap\IFD\DVEBMGS01\log\TEST_out.xml
    <?xml version="1.0"?>
    <OpenSearchDescription xmlns="http://...."> 
    </OpenSearchDescription>
    BUT the document attribut(?) encoding="UTF-8"?> is missing!
    How can i add encoding with value UTF-8 to the document object?? it should look like:
    <?xml version="1.0" encoding="UTF-8"?>
    *here is my coding.
    TYPE-POOLS: ixml.
    CLASS cl_ixml DEFINITION LOAD.
    DATA: lo_ixml           TYPE REF TO if_ixml,
          lo_streamfactory  TYPE REF TO if_ixml_stream_factory,
          lo_document       TYPE REF TO if_ixml_document,
          lo_parent         TYPE REF TO if_ixml_element,
          lo_ostream        TYPE REF TO if_ixml_ostream,
          lo_renderer       TYPE REF TO if_ixml_renderer,
         lv_rc           TYPE i.
    lo_ixml = cl_ixml=>create( ).
    lo_streamfactory = lo_ixml->create_stream_factory( ).
    lo_document = lo_ixml->create_document( ).
    lo_parent = lo_document->create_simple_element( name   = 'OpenSearchDescription'  "root node
                                                    parent = lo_document ).
    lo_parent->set_attribute_ns( name   =  'xmlns'
                                 value  = 'http://....' ).
    *rausrendern in file
    lo_ostream = lo_streamfactory->create_ostream_uri( system_id = 'D:\usr\sap\IFD\DVEBMGS01\log\TEST_out.xml' ).
    lo_renderer = lo_ixml->create_renderer( ostream  = lo_ostream
                                            document = lo_document ).
    lv_rc = lo_renderer->render( ).
    Thanks for help
    Britta

    Use the following code:
    set an document encoding
      l_encoding = l_ixml->create_encoding( character_set = 'UTF-8'
                                            byte_order = if_ixml_encoding=>co_none ).
      l_success  = l_ostream->set_encoding( encoding = l_encoding ).
    create a xml renderer
      l_renderer = l_ixml->create_renderer( document = l_doc ostream  = l_ostream ).

  • Firefox update 10 won't open and the previous version 3.6 won't load any pages. I have done everything this site said to do. HELP?

    The last version of Firefox that I had was the one before 3.6. I stopped upgrading due to it always messing up and not working right for me... whether it be due to vista, or just errors on your part. My husband decided to upgrade firefox to the newest one two days ago because the version I had was just "too slow!" Ever since he did that, I cannot get firefox to open. No matter how many times I uninstall it and delete everything mozilla on my computer then reinstall after restarting my computer, it just refuses to open. Every time i try it says that firefox has stopped working. It cant even check for solutions. I then try to click on the icon and I get something that says: firefox.exe - Bad Image C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d09154e044272b9a\MSVCP80.dll is either not designed to run n windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
    I have tried installing it over and over again several times, same message shows up. So i had clicked on the link to go download the previous version of firefox... what sucks is that the only version on the site is 3.6.27. I have never upgraded to this. So the second i installed that version, i now am able to open up firefox... BUT it is unable to connect. I have internet... a pretty bad ass connection. So my internet is not the problem. I then looked up how to fix that issue and did all 5 things listed under the Firefox cant load pages but other browsers can link. Still nada! I am now stuck using IE and going insane. I am on the verge of throwing my laptop out of the damn window because I have to wait 3 hours for google to load. Nothing is working for me... and it would be appreciated for something more. If i can get help with a ton of details on what to do or how to fix this issue... either version... i would greatly appreciate it. I am going nuts having to put up with IE because my husband decided to update Firefox to a version that sucks with vista!

    Here is the system requirements page: http://www.mozilla.com/en-US/firefox/system-requirements.html.
    http://www.mozilla.com/en-US/firefox/all-older has the latest 3.6.x version, and http://www.floodgap.com/software/tenfourfox/ is another option.

Maybe you are looking for

  • Index Vs table partition

    I have table whose growth is 1 million per month and may increase in future. I currently place an index on column which is frequently uses in where clause. there is another column which contains months so it may possible that I make 12 partitions of

  • IView is not shown sometimes

    Hi, I am using IE7, NW 7.0 Sometimes, when I click on iView link, the view is not loaded and I see a blank screen. Alongwith this, 'access is denied' message is displayed at the IE footer. Kindly provide your inputs to resolve this issue. Thanks, Nik

  • HDV KGCore crash with Final Cut express 4 NEED HELP

    I recently purchased a cannon hv30 hdv camera. This is my first time using High Def footage and I am now working on my first project with it. I have used Final cut express with a hard drive camera for over a year now and have made many projects with

  • Form submit button won't work in most browsers

    I have a PDF form which I created in InDesign, then added Form fields in Acrobat XI Pro, including a submit and print button. These work fine in Acrobat Reader, but in many browsers (Chrome, Firefox) the "submit" button doesn't work. It works fine in

  • BSP Page not found

    I created a BSP application, created the SICF entry, and have been running the application for months.  All of a sudden I am getting a page cannot be found error.  It's like it can't find the initial page.  When I go into an application that IS worki