If I do an FTP install will I get latest Kernel - fuse etc etc etc ??

Hi... I love ARCHBOOT and my local repository on a usb stick though I'm about to do a reinstall to get all the new 2.6.30 stuff. ARCHBOOT isn't going to work for now I think...
SO, may I ask that IF I boot from the CD and do an FTP install will I get the latest base stuff AND all everything else the latest versions? I thnk yes, though thought to ask the gurus here....
thank you!

Yes.... good to have comfirmation.... thanks.
I remind myself how much I enjoy since last week using ARCHBOOT and a ocal repository / repo-add all on one usb stick for total offince SUPER fast install. I am going to attempt to update te core database for ARCHBOOT as doing an ftp install is not so interesting/logical for me now, as I get better with ARCH.
many thanks!

Similar Messages

Was able to download and install Premier but can't install Photoshop Elements - getting multiple error messages (pirated software, etc). Any ideas?

Was able to download and install Premier but can't install Photoshop Elements - getting multiple error messages (pirated software, etc). Any ideas?

download from adobe.com or prodesigntools.com.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

IPod Touch Install will not get past "Free Find My iPod Touch" Help..

I have just got an iPod Touch for Christmas, and after attempting to install it to my iTunes, I have found a problem. I have tried to install this iPod, but it has gotten "Stuck" at a strange place in the setup. I will copy and past the page below.
Free Find My iPhone
Free Find My iPad
Free Find My iPod touch
Set up Find My iPhone for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPad or iPod touch.Set up Find My iPad for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPod touch.Set up Find My iPod touch for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPad. Learn More
Not Now
Set up Find My iPhone
Set up Find My iPad
Set up Find My iPod touch
Find My iPhone (or iPad or iPod touch) enables you to locate your iPad with Wi-Fi or iPod touch only when it is on and connected to a registered Wi-Fi network. Find My iPhone is not available in all countries.
When trying to click on any of the links, they do not seem to work at all, which is really bugging me. All I want to do is use my new iPod Touch, which I currently cannot do.
Also, the page i pasted above is NOT in the correct iTunes style/format, and there is no Search Bar above it, etc. It is just a blank page with exactly what I pasted.
Please help me, I would be forever grateful.

My iphone works!!! But it wasn't from rebooting (although rebooting gave me the idea to try Plan B, so thx very much for inspiration). I rebooted several times and nothing happened. Then, I decided to download the FindMyiPhone app (in case that had something to do with it). I downloaded the app from the app store on my iphone--NOT through itunes on my computer. (Tried that and failed).
After I downloaded the app, I had to go into iphone Settings "Mail, Contacts.." and key in my Mobile Me info. (Also, make sure Push notifications is ON; this is also in Settings) Next, I enabled bluetooth and then tried to connect to our wifi home network. As soon as iphone "discovered" the home network, I opened itunes, and the first screen asked me how I wanted to set up my phone.Yippie!
I don't know if the FindMyiPhone app had anything to do with it or if the iphone just wanted me to key in all of the MobileMe/itunes account stuff, so you'll have to figure out that one for yourself. I would be willing to bet, though, that this process will work with ipods as well as iphones.
Now, if I can just get rid of this splitting headache...

Clean Leopard Install - Can't get Photos back in Right (tripling, etc)

Hi. I did a clean Leopard install then loaded my iLife '06. I have my "iPhoto Library" on my external. This contains folders 'originals', 'modified', 'data', and other accoutremonts. In iPhoto, I selected "Import" and thought things were going well till I saw 1) triple copies of each photo 2) no import of my tags for each photo, albums, folders, etc. I see 2000, 2001, 2002, etc. but no 'Canada Vacation', etc.
So, knowing I still had them on my external, I deleted over 10,000 photos from iPhoto to start anew. Then I figured the triples were coming from 'originals', 'modified', 'data' so I tried just importing "originals". This put only 1 copy of the photo in iPhoto, but it's a jumbled mess with no tags, sections, etc.
I checked the help section but am still not 'getting it'. Could someone point me in the right direction or explain what I should do here to get my iPhoto back to where it was pristine/organized? I'm befuddled.

I fixed my problem by accident. I merely dragged my "iPhoto Library" from my external to "pictures" in my home directory.

FTP install, Don`t pacnic, unable to downlaod packages.txt

Hello everyone.
I am trying to install Archlinux using FTP install from the last 'don`t panic' CD, but the installer is unable to download the file 'packages.txt' from any of the servers. I tryed to update pacman and to install again, but I got the same error again. What can I do to solve the problem. I just formated the hard drive and now I am using links from install CD to post the topic.
Regards.

Thank you, byte.
I have no more CDs now I will have to wait till tomorrow. So it will and it is not possible to install arch using older CD`s, is that true. Or the problem is in me. I wanted to tune the base packages, not much, but I wanted to fill the power . As far as I know, that is not possible in the newest release of the install CD, and the setup is installing all the base packages, is that true again.
Regards.

Scsi controller not recognized during ftp install

Hi all,
As you can tell, this is my first post and my first attemp to install arch. I downloaded the latest ftp install floppies "Arch Linux 0.5 (Nova)" and I am trying to install arch on a PII system with and Adaptec 2940UW controller and no cdrom. I can boot from Tom's recue disk:
http://www.toms.net/rb/
and the controller is recognized and I can use fdisk to partition the drive.
However, when I boot from the arch install floppies, the controller is not recognized. When I manually load the module for the controller, ie. aic7xxx, lsmod shows it as unused.
After looking at the boot log using dmesg, I noticed the following, which I don't understand:
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno=2
Is this a kernel issue and does anyone have any pointers for me?
Thanks
Kevin
PS: I tried my best to search for a related topic.

Thanks for the reply. It still doesn't work for me.
I noticed that the floppy images have been updated -- the md5sum's have changed. I will give them a try.
As an aside, the listed md5sum's for the new images don't match the downloads. I downloaded from several mirrors and I get the same sums, which don't match the sums listed.
$ md5sum *.img
99683b5a119e6332cd8f2185a24083cf boot.img
d2501030749fa2629582de1f02846056 modules.img
97fb96d7b1d858cb260ea8b1005e071b root.img
$ cat md5sums
2d172ab879f1487f0a381cf432173c26 boot.img
ce6408f0e4051656ddf9c2df3356f1f8 modules.img
97fb96d7b1d858cb260ea8b1005e071b root.img
Thanks
Kevin

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

After the update to Android 5.0.1 my Galaxy Gear S will not install apps, I get an error message that says "Installation Failed. Try Later. (WO:WO:-1002)

After the update to Android 5.0.1 on my Galaxy Note 4, my Galaxy Gear S will not install apps, I get an error message that says "Installation Failed. Try Later. (WO:WO:-1002). I am glad it was a free app I was trying to install (I tried a couple of different ones to see if it was just a bad app and they all failed on the install. The Note 4 and the Gear S seem to be communicating okay via bluetooth (health stuff syncs, Gear S controls the music player on the note 4 Etc. )

Everything that I had installed previously on the gear S still works.
Everthing while in the gear manager seems to be working okay also. I can make changes in the Gear manager on the note 4 and they show up on the gear S. I have an app called watch styler , it let me create a new watch on the Note 4 and that showed up on the Gear S.
The only thing that seems to be not working is installing new apps.
When trying to get a new app it looks like it is working as normal , the dowload shows it is working but it errors out when it goes to install it.
REPLY SEPARATOR ***********

Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll Verify that you have access to that directory."

Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll Verify that you have access to that directory."

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

[FTP Install] cannot install as /mnt/etc is not created

Hi, happy new year to everyone
i've been unable to install Arch for a long time on my desktop system with raid/lvm2 partition. It runs fine on my old laptop.
Tonight I gave it another try with froscon install CD (August 2008), choosing FTP Install as usual, and end up stuck @ the same point.
Following http://wiki.archlinux.org/index.php/Ins … AID_or_LVM , everything goes well up to "Configure Arch", where /mnt/etc is *not* created, making this step a dead end one.
There are 2 Sata HDDs with identical partition :
/dev/sda1 * 1 15 120456 83 Linux
/dev/sda2 16 10011 80292870 5 Extended
/dev/sda5 16 2564 20474811 fd Linux raid autodetect
/dev/sda6 2565 5113 20474811 fd Linux raid autodetect
/dev/sda7 5114 9880 38290896 fd Linux raid autodetect
/dev/sda8 9881 10011 1052226 82 Linux swap / Solaris
/dev/sda1 is standard /boot
/dev/sd[ab]5 is a raid0 array with 3 partitions, the 3rd beeing free / for Arch setup.
/dev/sd[ab]6 is a raid1 array with 3 partitions for personnal data
/dev/sd[ab]7, raid0 array with 2 partitions that i can share for extra data (like /tmp)
/dev/sd[ab]8 are swap
I can activate existing RAID and LVM volumes, make a filesystem on /dev/systems/system3 array, mount it on /mnt then /sda1 on /mnt/boot. I also mounted other systems lvm partitions which went fine.
Configuring the network, downloading and installing base packages go fine.
Configure Arch gives me *empty* configuration files. i.e. Vi says "New DIRECTORY" for every configuration file.
It's been about a year I'm stuck there
Any advice's welcome.
Last edited by kozaki (2009-01-04 13:56:37)

Woow. Was able to finish the installation as soon as i choose "CD install" rather than "FTP install"
I know this is probably the first time in years i install a distro from the CD, so it might why i couldn't install Arch so many times.
Note that the issue with configure Arch had occured with every ISO i booted with since over a year

I was just told ML could not be installed because apple HD is broken and could not be repaired. I never had any problem ever to suggest a broken HD, on my 2 yr. old mac pro. 10.6.8. Any one else having this problem? Will I get a refund, if so how?

I have a 2009 MAC PRO 10.6.8. Had never had any problems. Tried installing Mountain Lion today. Was told, " Mountain Lion could not be installed because Hard Disk is broken"!
Is it because HD is broken or perhaps incompatible? Has any one else had this problem? I had no symptoms suggestive of a broken HD. Will I get reimbursed if ML could not be installed? If so what do I have to do?
How can I verify the status of the HD, in absence of symptoms for my own information?

mottoo wrote:
I have a 2009 MAC PRO 10.6.8. Had never had any problems. Tried installing Mountain Lion today. Was told, " Mountain Lion could not be installed because Hard Disk is broken"!
Is it because HD is broken or perhaps incompatible? Has any one else had this problem? I had no symptoms suggestive of a broken HD. Will I get reimbursed if ML could not be installed? If so what do I have to do?
How can I verify the status of the HD, in absence of symptoms for my own information?
The solution to your problem is rather simple
1: Get a external hard drive and use Disk Utility to format it with a GUID partition map and OS X extended Journaled.
2: Export your browser bookmarks and any other needed data to a file,. Copy your User data folders of Music, Pictures etc over to the external drive via drag and drop copy methods, disconnect the drive.
I don't advise using TimeMachine at this point since your boot drive is messed up, thus so will be your TM drive, just transfering the problem later on back to the new install. We are proceeding with a "Fresh install" method to eliminate as many issues as possible which a TM restore can return to a new OS X install.
3: Next you will need to follow these instructions to zero erase (important) and install 10.6 fresh, use the same named account (different password ok)
How to erase and install Snow Leopard 10.6
4: Before you return files or install programs, Software Update fully and use the AppStore to install 10.8, this way it will be on a fresh 10.6 install, free of issues.
5: Install any and all 10.8 compatible programs as much as possible before returning your User files, this is a performance measure.
If you need too, use this site to find one's that are 10.8 compatible.
http://roaringapps.com/apps:table
6: Last install your user files from the external drive backup into their respective Music, Pictures, Movies etc., folders, into the same named accounts so you preserve your iTunes playlists. When you open those programs, they will update their respective support files automatically.

Help! 13" macbook pro will not boot. Tried running disk repair from HD recovery, not repairable. Trying to reinstall OSx Lion, says disc is locked. Do I have to erase the drive and lose everything? I also have Bootcamp installed, will boot to Win OK

Tried running disk repair from HD recovery, not repairable. Trying to reinstall OSx Lion, says disc is locked. Do I have to erase the drive and lose everything? I also have Bootcamp installed, will boot to Windows no problem.

Hotrodmkviii,
try rebooting in Recovery mode, but when you reach the Mac OS X Utilities menu, run Terminal (from Utilities in the menu bar) instead. Inside the Terminal window, give it the following command, and then press the Return key:
diskutil list
Please include in your reply the output from that command.

If I erase and install will it remove my Boot Camp XP partition to?

Hi I got a new iMac at Xmas, 1st one ever, Im loving it!
Ive been messing about installing stuff, settings etc, I have set up my Boot Camp partition with X on and its working great. I havent run Time Machine yet as I knew I was going to be "testing" OS X out.
So what I really think I should do is wipe it all clean, get the OS X updates (v10.5.2 etc) and then do a backup and start afresh.But what will happen to my Boot Camp partition? will this get erased as well?
If so there is a free app called WinCLone that I could back it up with 1st I suppose, but am unsure if this works well?
So can someone help please? the only thing I need to backup ff OS X 1st is my iTunes music, as I finally have beenorganising it all with art, tags etc. this will just go onto a USB external HDD i have
cheers

I saw you said 32GB for your Boot Camp partition, I presume you formatted in FAT32. If this is the case, Winclone _will not_ work. It only works with NTFS partitions. I have used it before to resize my boot camp partition.
On a side note for anyone whom is trying to resize or change their file system on their BootCamp partition, your FAT32 partition can be converted to NTFS directly from Windows. This will allow the usage of Winclone (http://www.twocanoes.com/winclone/).
+1. Click Start, point to *All Programs*, point to Accessories, and then click *Command Prompt*.+
+2. At the command prompt, type the following, where drive letter is the drive that you want to convert:+
+*convert drive letter: /fs:ntfs*+
+For example, type the following command to convert drive E to NTFS:+
+*convert e: /fs:ntfs*+
+Note If the operating system is on the drive that you are converting, you will be prompted to schedule the task when you restart the computer because the conversion cannot be completed while the operating system is running. When you are prompted, click YES+
You can now use Winclone to make an image of the existing partition. Then use BootCamp to delete the existing partition and create a new larger partition.

Does anybody know if you uninstall iTunes (mine is giving me an error message) and then re-install, will my music still be there (somewhere?) I don't have it saved to the cloud, but it is on my iPad.

Does anybody know if you uninstall iTunes (mine is giving me an error message) and then re-install, will my music still be there (somewhere?) I don't have it saved to the cloud, but it is on my iPad I recently upgraded my iTunes account and now I can't open it. I get an error message and it says I need to re-install.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installation will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to ins

I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installaion will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to install on Explorer, Firefox, and Chrome. Nothing works. Please help.
Thanks/ Scott

1. Restart your computer to stop any Adobe process that is running.
2. Click on the following Adobe link. Go to the bottom where it says "Still having problems?". Click on the version of Flash Player for your browser.
Installation problems | Flash Player | Windows

If I do an FTP install will I get latest Kernel - fuse etc etc etc ??

Similar Messages

Maybe you are looking for