If I execute the query on a cube now my OLAP processor where will come
hi can any body help regarding this
If I execute the query on a cube now my OLAP processor where will come first(SID table or Fact Tbl or Dimension Tbl)
hi,
i think first is coming to fact table, then dim and sid tables.
regards
harikrishna N
Similar Messages
-
Incorrec entries when execute the query
hi,
I am facing one problem when execute the query on inventory cube(non cumulative cube).Query is diplaying entries for valuated stock Qty.on particular date, but those entries are not exist in BIW(Infocube ,ODS) or R/3 System.
I checked cache parameters. all settings are correct.
if anyone has the idea on this pls. do the needful
Thanks n Regards,
HReddy.M
Ihello,
Try to drill down the report based on request ID and find out one record which has this inconsistancy...! then see the data in the CUBE based on that Req ID and PSA..! may be this way will help u out..!
Check FS10N/MB5B/MB5L Tcodes in R/3 for reconcilation!
-EnjoySAP -
Hi Gurus,
We have 5 queries on a multiprovider which is built on two cubes,one query is not getting executed and all other queries are working fine, we are restricting the query for one cube which has only 32 records, all these queries are working fine in dev sys and in the quality we got this error for one query .
Can any one give some solution for resolving it
regards
TilakBut what error is it giving when you execute the query?
-
While Rollup is goingon Can we execute the query
Hello All
We have a cube and aggregates built on this cube and daily in my Process chain we have step Rollup.
Now while Rollup is goingon Can we execute the query which is builut on the same cube? Will the cube will be locked?
Can we excute query while load is goingon to this cube?
Regards
BaljiHi Balaji,
You can execute a query when the roll up is going on. The new data is available to the report only when the rollup is complete, but this will not create locks.
Hope this helps... -
Invalid read mode while executing the query
Hi,
I have developed a query based on a cube in MM module.
When I try to execute the query, the following error is being displayed:
Invalid read mode
Message no. BRAIN017
Diagnosis
If queries (often unintentionally) are assigned the read mode "Query to Read All Data at Once", this often results in performance problems. To eliminate this problem, this warning is displayed when you execute a query with this read mode when the query is generated.
Procedure for System Administration
Before you execute the query, repair the read mode:
u2022 You can repair the read mode for this query in the Query Monitor (transaction RSRT1). You can set the read mode for the selected query by choosing Query -> Read Mode.
u2022 If this warning is displayed when you check a query, you need to change the default read mode for new queries in the InfoCube in InfoCube maintenance. In InfoProvider maintenance, choose Environment -> InfoProvider Properties -> Change and make the relevant settings on the Query/Cache tab page.
Please let me know what are the exact setting that I need to do and where.
Thanks in advance.
Will assign points for the solution.
Thanks & Regards.Hi Ganesh,
You can change the read mode by going to transaction RSRT, entering the query name and then clicking the properties button. A dialog box will then be displayed that allows you to change the read mode.
The question of what's the best read mode for you query depends on the requirements of the query:
If you choose "read all data at once", it will take quite awhile before the first view of the query is shown. This is because it basically reads all data needed for your query (e.g. data for hierarchy nodes etc). However, after the initial view, successive navigations might be a lot faster.
The read mode "Read data during navigation and expansion of hierarchies" is usually the best mode. The initial view will show up in the least amount of time in this mode. However, when the users start to navigate, data will then be read from the database (aggregates, or the main cube tables) or the cache.
The read mode "Read data during navigation" is like the "Read data during navigation and expansion of hierarchies" mode. However, it will also read the data for the hierarchy nodes. Expansions of the hierarchy will therefore be faster in this mode. Of course, there's additional overhead for the initial view.
Hope this helps. Cheers. -
Can I stop a report from Re-executing the query when I go back to that page
I have a report that has a complicated query and looks at a lot of information to display the results. This query then links of to show details of individual items that were displayed in the result. But when I hit the back button on the browser, it executes the query again and it takes a while for the page to load.
Is there any way to stop this and only execute the query when the User pushes a Button on the page else display the previous results.
Thanks
SriramAnother alternative is to make that detail link open in a popup window using
javascript:popupURL(...);This way, the complicated report page is always visible. -
While executing the query in the web template I am facing below issue
Hello SAP geniuses,
Please help me on my issue ,
while executing the query in the web template i am facing below issue.
The variable for characteristic (region) is appearing but this characteristic (region) is not appearing in the free characteristic zone but when we are executing the query with out webtemplate it is showing both variable and free characteristic
can anybody help us to identify what is the issue with the web template.
Thanks
AlokHi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP -
0ADHOC error while executing the query from Report Designer
Hi All,
When I am executing The Query from Report Designer, am getting the below error.
Please help me in this regard.
The initial exception that caused the request to fail was:
The Web template "0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
Thanks,
KVRHi,
The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
Best regards,
Janine -
While executing the query getting an error u2018Page Not Foundu2019 in the bowser.
Hello,
I opened a Bex Query in Query Analyzer and clicked on the Execute button to execute the query in our portal site. But I am getting an error u2018Page Not Foundu2019 in the bowser.
As I am new to BI,Kindly guide me through the steps.
what all setting needs to be done?
Regards,
RachelHi,
The Path is C:\WINDOWS\system32\drivers\etc\hosts
You need to update "host file" in your server/in your PC. So ask Network people to do it and also you need to change your browser LANsettings.
Eg: 11.11.8.161 BWQ1 BWQ1.***.com
Like above you need to change in your host file.
Thanks
Reddy
Edited by: Surendra Reddy on Nov 27, 2008 8:12 AM -
Error while executing the query in RSRT
Hi to all,
I am executing the query in client development system in RSRT.
Error coming (Query could not open Genun id is invalid)
I shall be thankfull to you for this.
Regards
Pavneet RanaHi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP -
Error while executing the query-VIMP
Dear alll
I am executing the query in production i am getting this below error message
BRAIN 629 Specify a value for variable companycode(single values,entry,mandatory)
BRAIN 629 specify a values for variables Simulkation ID1Individal values,requireed entry)
RSBOL 000 Program error in class SAPMSSY1 Method UNCAUGHT_EXCEPTION
BRAIN 633 varibale contain invalid values
It have been worked untill yesterday
Please suggest me in futhuru its very very imp to deliver the reportsHi,
Try one of these
1. Take of the infoobject from the query definition and see if the query is working.
2. Try saving this Query as another one and try executing it.
REgards
Govind -
Serious system error while executing the query: java.lang.OutOfMemoryError
From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space
We do not want to increase the heap size. Is there any other way we can solve this problem?In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
Input xml:
<ns1:createTest>
<ns1:createTemps>
<ns0:createTemp>
<ns0:field1>1</ns0:field1>
<ns0:field10>test1</ns0:field10>
</ns0:createTemp>
<ns0:createTemp>
<ns0:field1>2</ns0:field1>
<ns0:field10>test2</ns0:field10>
</ns0:createTemp>
</ns1:createTemps>
</ns1:createTest>
each ns0:createTemp represent a row that need to be inserted in the table.
When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space -
Dump while executing the Query
Hi,
when I try to execute the query I get the following dump.
ASSIGN_TYPE_CONFLICT
Error analysis
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
Pleaes assist , its urgent
Regards,
ANitaHi,
The problem is Solved.
If the problem is occuring while running the query, regenerate the query through transaction RSRT.
Regards,
ANita -
I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRajTo avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha -
Is it possible to change the column headings when ever i execute the query
in the runtime i want to change the column headings is that is possible.
Ex: if write a timestampadd(.......) function in the table heading is that change the dates automatically whenever i execute the query?
is this is possible?
Product name 1-2-10 5-6-10
aaaa 5 6
bbfff 6 10Product name 1-2-10 5-6-10
aaaa 5 6
bbfff 6 10It looks like the dates are values in a column? Put that column in the Columns section of the Pivot Table and Product Name in the Rows section and it should produce what you are looking for.
Edited by: David_T on May 19, 2010 2:33 PM
Maybe you are looking for
-
How to auto-connect to external server upon startup?
Is there a way that a user could by-pass "Connect to Server" and have the workstation auto-connect to an external, but in-house server each time the work-station is booted up? Also, is there a way to have it connect to this server without having to e
-
How to Make Folders Visible in Library
I want to view folders in library to make sorting easier but my template of folders (created in Finder) will not show. Before I cull my images, I'd like to be able to sort/shove specific images into specific folders before culling. It appears that
-
Authentication error when I try to make encrypted disk image
I usually make an ecrypted disk image when I back up my financial files on my Powerbook g4 or flashdrive. Just recently I get a "cannot make" "files" - "authentication error". I've tried the single user mode and removed files as per the discussion bo
-
Can I start downloading Photoshop CS6? Or do I have to wait for eligibility verification?
-
I have a Labview file that transmits and receives using CAN and also sends and receives using the RS-232 port. I need to convert the .vi file to an .exe file so it can be run on a computer that does not have Labview. I heard it can be done, but how?