If I Go Over The 300GB limit?

Hi all
My mac decided to go nuts on me and deleted all my iTunes content.
I was able to re-download all my video files from iTunes for free but it was a HUGE download and was a fair few 100GB's of data.
'IF' I have gone over the 300GB limit for this month will it reset back to oGB next week or will I still get throttled for doing it this month?
I know they are dropping the 300GB limit at the end of April but I don't want to have slow speeds for the next month.

Pilot25dmc wrote:
Hi all
My mac decided to go nuts on me and deleted all my iTunes content.
I was able to re-download all my video files from iTunes for free but it was a HUGE download and was a fair few 100GB's of data.
'IF' I have gone over the 300GB limit for this month will it reset back to oGB next week or will I still get throttled for doing it this month?
I know they are dropping the 300GB limit at the end of April but I don't want to have slow speeds for the next month.
Hi.
Have you checked your usage using the online meter ? (see my shortcuts options 14d-14g). At least you will see how much you've used a day in arrears.
There's no actual date in April yet for the 300GB threshold to be scrapped. However I would expect that any speed reduction during peak times (if relevant) would still be applied until the 30 days or removal of the limit - whichever is sooner.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Similar Messages

How do I split a voice memo into two so I can send it if it is over the size limit?

I recorded several voice memos that are over the size limit for sending them from my iPhone 5 in an e-mail. Is there a way to split them into 2 smaller files?

Is this what you're doing:
To trim the recording click the Trim Memo button. You will see a blue progress bar with a yellow handle on the left and on the right. Drag the handles to set the start and end of the clip. Press the play button to confirm it sounds ok then press the large Trim Voice Memo to finalize your cut.
!http://www.iclarified.com/images/tutorials/3882/14927/14927.jpg!

Will Going Over The Credit Limit One Time Hurt Score Long Term?

I have a flexible spending Chase Sapphire preferred card that has a limit of $7000. I don't know when, but according to my credit report it shows that my high balance at one point in time was at $11k - I'm guessing this was several several months ago if not over a year. I don't ever keep my balance that high, and I'm sure it was only at that balance for 24-48 hours, and Chase just happened to report to the CB's the day the balance was that high (lucky me). Currently my balance is really low , around $150. I usually keep the balance at less than $500 at any one time (and if it goes over that, I pay it down several times a month just in case). Anyway, my lender told me that if I raised my credit limit to around $15k (or at least higher than the $11k balance it had at one time), it would raise my score considerably because it would show that I never went above the limit. So I called Chase, and luckily I was able to get the limit raised to about $13k. I was pre-approved for it, so they did not need to run my credit (good news I guess). My question is - should I expect a score increase just because the one time high blaance of $11k is now under my new $13k limit (instead of over the $7k limit it had). I thought I knew a lot about how credit scores worked, but this is new to me. Is the lender blowing smoke or is this actually a normal thing to expect? Thx

CH-7-Rebuilding wrote:
Do you see that smoke in the air? Yep, your lender has no idea what they are talking about. Lots of people have signature cards that have, say, a 5K limit, and might have a 20K high credit. That is what a signature card is for! You just have to pay off the amount over the credit limit when the bill comes in. That high credit amount above the limit had no effect on your FICO score. The raising of the limit might impact your score if it lowers your current utilization, but otherwise it should not matter as far as FICO. It will help getting higher limits with other lenders, though. bingo! many of us move limits or have been CLD during the crunch and have "high balance" many times greater than our CL. lender is a dummy.

Will I get charged for going over the CC limit?

I have a CC that I just basically maxed out without going over the limit but was real close. I want to know if when they calculate the interests on the debt with that put me over the limit on the card which will then trigger them to charge me a fee for going over the limit? I know I should not do this but I have a check coming in a couple of months that will clear the debt completely so no worries there. Thanks in advance

Jemster wrote:
longtimelurker wrote:
Jemster wrote:
It depends on the terms on the card. Most of them have an over the limit fee. The will charge interest on your statement date which is usually a couple days after your due date. I would pay as much as I can by the due date. No, since the CARD act, they DON'T have over the limit fees, unless you opt in. (If you don't, charges over the CL can be denied). So you should be fine.Sorry to give out wrong info. I think I'll stop posting from now on. There is absolutely no reason for you to stop posting. We all have once upon a time posted wrong info so there isn't any shame in doing so. The point of the forum is to learn and not everyone is aware of the provisions of the Card Act, myself included.

Do i get charged for going over the character limit

I have an Iphone 5, unlimited texts blah blah blah...
But i've been told that if i go over the 160 character limit when sending a text, i get charged for it?
Surely it just gets counted as a seperate text if anything.
Please help, my friends are getting annoyed that i keep sending them 4 seperate texts -.-

If you have unlimited texting, then you should not be charged... your friends may be if they do not, however.

Is there any way to stop my iPhone use data when i hit the data limit so i don't go over the data limit

is their any way to stop an iphone 4s from using data when i hit the 2gb limit on verizon wireless this way i dont have to pay the fee for extra data
thank you

Don't know of any way for it to happen automatically, but you can still use the phone and send/receive sms with cellular data turned off.

CFMAP - multiple markers - error: the webpage has gone over the requests limit in too short a period

Google Maps has a restriction on how many map markers can be requested per second. The limit is ten per second. I am looking for the "best Practice" on how coldfusion developers address this limitation. I am looking to display a map of the US with 125 location markers. Ideally I would like to cache the map for retrieval for both efficiency purposes and to avoid depletion of the total requests that Google allows per day. Thanks in advance for any insight that you can lend.

One reference is https://developers.google.com/maps/documentation/business/articles/usage_limits#limitexcee ded where a solution in Python is given to pause a loop if an OVER_QUERY_LIMIT error is received. I agree that there are maps out there with hundreds of markers. My mission is figuring how they are doing this.

Can't add any more buddies, but i always could, even over the limit..

On my iChat buddy list (on an AIM account), I have a lot over the 200 maximum, and it has always worked fine. I had almost 300 buddies, and then tried to add a few more. The first one worked, but the second two adds didn't. Is there a way to fix this other than deleting some buddies?

> I've got a site which is built entirely with AP Divs (in
CS3). Messy, but
> quick and easy.
You pay a serious price for the "quick and easy" part, buy
you may not be
aware of it yet.
> I've got to the stage now though, where I can't add any
more. I can draw
> the
> shape using the Draw AP Div tool, but as soon as I let
go of the mouse
> button,
> the box disappears (it doesn't get as far as becoming a
blue box).
There is no limit on the number of AP elements a page can
have.
> One thing I have noticed is that if I use design view to
delete an AP
> element,
> it doesn't seem to get removed from the code.
This would mean that you aren't really removing the element
from either
Design or Code view. If the code is there, the element is
there. If the
code is not there, the element is not there.
> Anyone got any ideas?
It would be hard to diagnose what might be happening without
seeing your
page and its code. Can you post a link?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"aliprior" <[email protected]> wrote in
message
news:ge1mjo$i4p$[email protected]..
> Hi,
>
> I've got a site which is built entirely with AP Divs (in
CS3). Messy, but
> quick and easy.
>
> I've got to the stage now though, where I can't add any
more. I can draw
> the
> shape using the Draw AP Div tool, but as soon as I let
go of the mouse
> button,
> the box disappears (it doesn't get as far as becoming a
blue box).
>
> I've checked that it's not hidden beneath another layer.
>
> One thing I have noticed is that if I use design view to
delete an AP
> element,
> it doesn't seem to get removed from the code.
>
> Anyone got any ideas?
>
> Thanks,
>
> A
>

How can I over ride the combination code to access the volume limit?

I want to increase my volume limit but there is a combination lock that shows up and I dont know what the code is! Is there some way I can over ride this and increase my volume limit? It's hard to hear any music.

The only way to bypass the volume limit passcode is to restore the device to factory settings in iTunes.
Restoring iPod to factory settings
B-rock

What are my options to transfer photos from my ipad to my mac that are over the 30 day icloud limit?

What are my options to transfer photos from my ipad to my mac that are over the 30 day icloud limit?

Welcome to the Apple community.
Connect it to the computer with a USB cable, open iPhoto, import your iPad photos.

Office 2010 downloads too much stuff to users' roaming profiles, making it go over the 30MB size limit

Hey, we recently rolled out to Office 2010 at my workplace.
On the student segment we've activated the 30MB roaming profile size limit, and we've found that a bunch of students have had trouble with this now because Office 2010 seems to download around 8MB of files to %APPDATA%\Microsoft\Templates\LiveContent, which
occasionally makes the profile go over the 30MB size limit.
Is there any easy way to prevent this LiveContent from being downloaded?? Anything I can set in the installation transformation file, or preferably with a registry setting or something?

You had mentioned a policy to disable synchronization of the LiveContent folders.
I think it would be this GP admin template setting, it's what we use for this kind of requirement:
File Name: UserProfiles.admx
Policy Setting Name: Exclude directories in roaming profile
Scope: User
Policy Path: System\User Profiles
Registry Information: HKCU\Software\Policies\Microsoft\Windows\System!ExcludeProfileDirs
Supported On: At least Windows 2000
Help Text: This policy setting lets you exclude folders that are normally included in the user's profile.
As a result, these folders do not need to be stored by the network server on which the profile resides and do not follow users to other computers.
Note: When excluding content from the profile you should try to exclude the narrowest set of data that will address your needs.
For example, if there is one application with data that should not be roamed then add only that application's specific folder under the AppData\Roaming folder rather than all of the AppData\Roaming folder to the exclusion list.By default, the Appdata\Local
and Appdata\LocalLow folders and all their subfolders such as the History, Temp, and Temporary Internet Files folders are excluded from the user's roaming profile.In operating systems earlier than Microsoft Windows Vista, only the History, Local Settings,
Temp, and Temporary Internet Files folders are excluded from the user's roaming profile by default.If you enable this policy setting, you can exclude additional folders.If you disable this policy setting or do not configure it, only the default folders are
excluded.
Note: You cannot use this policy setting to include the default folders in a roaming user profile.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Read the signal value that pass over the upper and lower limit..

how to create the system which can read the signal value that pass the lower and upper limit? i've try but the system only read the value that in range of upper and lower limit..thanks..

Im not very sure if this system can read the value that pass over the limit..because at the save file data so many value(i will attach that file)..and i dont know how to setting to get the failure values only..
Actually i want to build some system that can read and save value that pass over the limit..i take the signal from simulation sine signal..no hardware required..
im very new with this software and im in learning process..
A very big thanks to all that helping me..
save file data from the system
Channels 8
Samples 1 1 1 1 1 1 1 1
Date 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05
Time 12:30:11.099999 12:30:11.216 12:30:11.216 12:30:11.216 12:30:11.099999 12:30:11.216 12:30:11.216 12:30:11.216
X_Dimension Time Time Time Time Time Time Time Time
X0 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1
Delta_X 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000
***End_of_Header***
X_Value Sine (Negative Peak) Failures (Negative Peak) Upper Limit (Negative Peak) Lower Limit (Negative Peak) Sine (Positive Peak) Failures (Positive Peak) Upper Limit (Positive Peak) Lower Limit (Positive Peak) Comment
0.100000 -6.999066 -6.999066 5.000000 -5.000000 6.999136 6.999136 5.000000 -5.000000
0.200000 -6.998993 -6.998993 5.000000 -5.000000 6.999204 6.999204 5.000000 -5.000000
0.300000 -6.998917 -6.998917 5.000000 -5.000000 6.999269 6.999269 5.000000 -5.000000
0.400000 -6.998838 -6.998838 5.000000 -5.000000 6.999331 6.999331 5.000000 -5.000000
0.500000 -6.998756 -6.998756 5.000000 -5.000000 6.999391 6.999391 5.000000 -5.000000
0.600000 -6.998672 -6.998672 5.000000 -5.000000 6.999447 6.999447 5.000000 -5.000000
0.700000 -6.998585 -6.998585 5.000000 -5.000000 6.999501 6.999501 5.000000 -5.000000
0.800000 -6.998495 -6.998495 5.000000 -5.000000 6.999552 6.999552 5.000000 -5.000000
0.900000 -6.998403 -6.998403 5.000000 -5.000000 6.999601 6.999601 5.000000 -5.000000
1.000000 -6.998307 -6.998307 5.000000 -5.000000 6.999646 6.999646 5.000000 -5.000000
1.100000 -6.998209 -6.998209 5.000000 -5.000000 6.999689 6.999689 5.000000 -5.000000
1.200000 -6.998108 -6.998108 5.000000 -5.000000 6.999729 6.999729 5.000000 -5.000000
1.300000 -6.998005 -6.998005 5.000000 -5.000000 6.999766 6.999766 5.000000 -5.000000
1.400000 -6.997898 -6.997898 5.000000 -5.000000 6.999801 6.999801 5.000000 -5.000000
1.500000 -6.997789 -6.997789 5.000000 -5.000000 6.999833 6.999833 5.000000 -5.000000
1.600000 -6.997677 -6.997677 5.000000 -5.000000 6.999862 6.999862 5.000000 -5.000000
1.700000 -6.997563 -6.997563 5.000000 -5.000000 6.999888 6.999888 5.000000 -5.000000
1.800000 -6.997445 -6.997445 5.000000 -5.000000 6.999912 6.999912 5.000000 -5.000000
1.900000 -6.997325 -6.997325 5.000000 -5.000000 6.999932 6.999932 5.000000 -5.000000
2.000000 -6.997202 -6.997202 5.000000 -5.000000 6.999950 6.999950 5.000000 -5.000000
2.100000 -6.997076 -6.997076 5.000000 -5.000000 6.999965 6.999965 5.000000 -5.000000
2.200000 -6.996948 -6.996948 5.000000 -5.000000 6.999978 6.999978 5.000000 -5.000000
2.300000 -6.996817 -6.996817 5.000000 -5.000000 6.999988 6.999988 5.000000 -5.000000
2.400000 -6.996683 -6.996683 5.000000 -5.000000 6.999994 6.999994 5.000000 -5.000000
2.500000 -6.996546 -6.996546 5.000000 -5.000000 6.999999 6.999999 5.000000 -5.000000
2.600000 -6.996546 -6.996546 5.000000 -5.000000 7.000000 7.000000 5.000000 -5.000000
2.700000 -6.996683 -6.996683 5.000000 -5.000000 6.999994 6.999994 5.000000 -5.000000
2.800000 -6.996817 -6.996817 5.000000 -5.000000 6.999988 6.999988 5.000000 -5.000000
2.900000 -6.996948 -6.996948 5.000000 -5.000000 6.999978 6.999978 5.000000 -5.000000
3.000000 -6.997076 -6.997076 5.000000 -5.000000 6.999965 6.999965 5.000000 -5.000000
3.100000 -6.997202 -6.997202 5.000000 -5.000000 6.999950 6.999950 5.000000 -5.000000
3.200000 -6.997325 -6.997325 5.000000 -5.000000 6.999932 6.999932 5.000000 -5.000000
3.300000 -6.997445 -6.997445 5.000000 -5.000000 6.999912 6.999912 5.000000 -5.000000
3.400000 -6.997563 -6.997563 5.000000 -5.000000 6.999888 6.999888 5.000000 -5.000000
3.500000 -6.997677 -6.997677 5.000000 -5.000000 6.999862 6.999862 5.000000 -5.000000
3.600000 -6.997789 -6.997789 5.000000 -5.000000 6.999833 6.999833 5.000000 -5.000000
3.700000 -6.997898 -6.997898 5.000000 -5.000000 6.999801 6.999801 5.000000 -5.000000
3.800000 -6.998005 -6.998005 5.000000 -5.000000 6.999766 6.999766 5.000000 -5.000000
3.900000 -6.998108 -6.998108 5.000000 -5.000000 6.999729 6.999729 5.000000 -5.000000
4.000000 -6.998209 -6.998209 5.000000 -5.000000 6.999689 6.999689 5.000000 -5.000000
4.100000 -6.998307 -6.998307 5.000000 -5.000000 6.999646 6.999646 5.000000 -5.000000
4.200000 -6.998403 -6.998403 5.000000 -5.000000 6.999601 6.999601 5.000000 -5.000000
4.300000 -6.998495 -6.998495 5.000000 -5.000000 6.999552 6.999552 5.000000 -5.000000
4.400000 -6.998585 -6.998585 5.000000 -5.000000 6.999501 6.999501 5.000000 -5.000000
4.500000 -6.998672 -6.998672 5.000000 -5.000000 6.999447 6.999447 5.000000 -5.000000
4.600000 -6.998756 -6.998756 5.000000 -5.000000 6.999391 6.999391 5.000000 -5.000000
4.700000 -6.998838 -6.998838 5.000000 -5.000000 6.999331 6.999331 5.000000 -5.000000
4.800000 -6.998917 -6.998917 5.000000 -5.000000 6.999269 6.999269 5.000000 -5.000000
4.900000 -6.998993 -6.998993 5.000000 -5.000000 6.999204 6.999204 5.000000 -5.000000
5.000000 -6.999066 -6.999066 5.000000 -5.000000 6.999136 6.999136 5.000000 -5.000000
5.100000 -6.999136 -6.999136 5.000000 -5.000000 6.999066 6.999066 5.000000 -5.000000
5.200000 -6.999204 -6.999204 5.000000 -5.000000 6.998993 6.998993 5.000000 -5.000000
5.300000 -6.999269 -6.999269 5.000000 -5.000000 6.998917 6.998917 5.000000 -5.000000
5.400000 -6.999331 -6.999331 5.000000 -5.000000 6.998838 6.998838 5.000000 -5.000000
5.500000 -6.999391 -6.999391 5.000000 -5.000000 6.998756 6.998756 5.000000 -5.000000
5.600000 -6.999447 -6.999447 5.000000 -5.000000 6.998672 6.998672 5.000000 -5.000000
5.700000 -6.999501 -6.999501 5.000000 -5.000000 6.998585 6.998585 5.000000 -5.000000
5.800000 -6.999552 -6.999552 5.000000 -5.000000 6.998495 6.998495 5.000000 -5.000000
5.900000 -6.999601 -6.999601 5.000000 -5.000000 6.998403 6.998403 5.000000 -5.000000
6.000000 -6.999646 -6.999646 5.000000 -5.000000 6.998307 6.998307 5.000000 -5.000000
6.100000 -6.999689 -6.999689 5.000000 -5.000000 6.998209 6.998209 5.000000 -5.000000
6.200000 -6.999729 -6.999729 5.000000 -5.000000 6.998108 6.998108 5.000000 -5.000000
6.300000 -6.999766 -6.999766 5.000000 -5.000000 6.998005 6.998005 5.000000 -5.000000
6.400000 -6.999801 -6.999801 5.000000 -5.000000 6.997898 6.997898 5.000000 -5.000000
6.500000 -6.999833 -6.999833 5.000000 -5.000000 6.997789 6.997789 5.000000 -5.000000
6.600000 -6.999862 -6.999862 5.000000 -5.000000 6.997677 6.997677 5.000000 -5.000000
6.700000 -6.999888 -6.999888 5.000000 -5.000000 6.997563 6.997563 5.000000 -5.000000
6.800000 -6.999912 -6.999912 5.000000 -5.000000 6.997445 6.997445 5.000000 -5.000000
6.900000 -6.999932 -6.999932 5.000000 -5.000000 6.997325 6.997325 5.000000 -5.000000
7.000000 -6.999950 -6.999950 5.000000 -5.000000 6.997202 6.997202 5.000000 -5.000000
7.100000 -6.999965 -6.999965 5.000000 -5.000000 6.997076 6.997076 5.000000 -5.000000
7.200000 -6.999978 -6.999978 5.000000 -5.000000 6.996948 6.996948 5.000000 -5.000000
7.300000 -6.999988 -6.999988 5.000000 -5.000000 6.996817 6.996817 5.000000 -5.000000
7.400000 -6.999994 -6.999994 5.000000 -5.000000 6.996683 6.996683 5.000000 -5.000000
7.500000 -6.999999 -6.999999 5.000000 -5.000000 6.996546 6.996546 5.000000 -5.000000
7.600000 -7.000000 -7.000000 5.000000 -5.000000 6.996546 6.996546 5.000000 -5.000000
7.700000 -6.999994 -6.999994 5.000000 -5.000000 6.996683 6.996683 5.000000 -5.000000
7.800000 -6.999988 -6.999988 5.000000 -5.000000 6.996817 6.996817 5.000000 -5.000000
7.900000 -6.999978 -6.999978 5.000000 -5.000000 6.996948 6.996948 5.000000 -5.000000
8.000000 -6.999965 -6.999965 5.000000 -5.000000 6.997076 6.997076 5.000000 -5.000000
8.100000 -6.999950 -6.999950 5.000000 -5.000000 6.997202 6.997202 5.000000 -5.000000

Help! I need a simple powershell command to display all folders & files over the 260 char limit

Can anyone help me please? I'm trying in vain to identify any files or folders I have in a directory over the 260 char limit.
my powershell knowledge is quite limited so I've hit the wall with ideas.
Any help appreciated.
Thanks

Would running this command on its own within powershell work?
Or do I need to add this to your script?
get-folderitem | Where {
$_.fullname.length -gt 260

Over the limit notification

Has anyone else noticed that Verizon has stopped sending over-the-limit texts messages to your phone?
I was told they did it at 90%, then about 100%. They have done this for me for a couple of years, this past billing cycle they didn't and i assumed since i had not heard from them, i was not over the limit and didn't checked. Got stuck with an additional charge on my bill.
When I inquired about it, I was told they don't guarantee that they will send text message notifications.
Anyone else run into this?

I got color change to red in console when threshold
is over the limit, but I didn't get any notification
by email.Did you actually turn on the email action for that limit? It's not automatic as soon as you configure Solaris to send email.
In the Attribute Editor window, right next to where you specified your red (critical) limit in the "Alarms" tab, there will be an "Actions" tab. You need to turn on the email action for the critical threshold. Get rid of the current red alarm and make a new one to test it.
If you want to configure email actions from a single place (instead of for every severity of all the things that can go wrong on each system, by hand): take a look at EventAction:
http://www.halcyoninc.com/products/EventAction/index.php
Regards,
[email protected]

I was trying to send a video via iMessage over wifi, but was only allowed to send a fraction due to the size limit. Does anyone know what exactly the limit is? Thanks!!

I was trying to send a video via iMessage over wifi, but was only allowed to send a fraction of the video due to the size limit. Does anyone know what exactly the limit is? Thanks!!

You said: "I've never tried the restore function in disk utility. Would that be the same as cloning the drive?
YES! See the my old instructions below. What you might try after step 5 is to restart you MBP holding down the Option key. Select the new HDD icon and see if it boots. This way you will know that the new HDD is operable.
Ciao.
INSTALLING A NEW HDD IN A MB
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them.
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.

If I Go Over The 300GB limit?

Similar Messages

Maybe you are looking for