If I go to a Verizon store tomorrow, Tuesday September 23, will there be any iPhone 6's available? I do not want the iPhone 6+, just the regular iPhone 6. I am looking to buy the 64 gb silver version, but will buy the 128 gb version if needed.

Thanks for taking an interest in upgrading to a new phone. We would recommend calling the store before making a trip to see if they have you want in stock.
Store Locator: http://bit.ly/3SdsA
TamaraH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Why did my local Verizon store rep try to talk me out of an iPhone? He told me they were made of glass and would break. If I wanted one I should buy it somewhere else. I had to insist on the purchase telling him I have a MacBookPro and iPad.

Why did my local Verizon store rep try to talk me out of an iPhone? He told me they were made of glass and would break. If I wanted one I should buy it somewhere else. I had to insist on the purchase telling him I have a MacBookPro and iPad and I was upgrading both my service contract and two phones.

It seems an odd way of doing business, I think it would make more sense just to say they didn't have any in stock. However I can think of four reasons. 1) budone suggested the request may have come from Apple, one reason for them to request would be they are running out of the current model of iphone. Production problems, phone related or not. 2) Whoever has Verizon's insurance on the iPhones may have stated ENOUGH! Perhaps they have replaced too many iPhones. 3) Verizon will soon be giving away the iPhones (with of course purchase of a (overpriced) phone/data plan contract), so they don't want customers complaining that they had to pay for theirs. Last but not least 4) The salesperson or store manager may have a beef with Apple (or their insurer). However, These are simply my guesses, why not call the store you purchased from and ask to speak to the manager. You may (or not) get a better answer. Hope this helps.

HT1918 My iphone keeps saying in order to buy a song from itunes, I need to previde the answers to security questions but I don't remember the answers. I've clicked to change it but in order to change it, I need the answers. What do I do?

My iphone keeps saying in order to buy a song from itunes, I need to previde the answer to security questions but I don't remember the answers and i've tried to change it but in order to do that, I need the answers.

You canot easily change your country settings. The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE

I am considering buying an iPad. I want to use song book, store a few pic, store a little music, and store educational apps for teaching. will 16gb be enough. i don't need 3g just wi-fi.

I am considering buying an iPad. I want to use song book, store a few pic, store a little music, and store educational apps for teaching. will 16gb be enough. i don't need 3g just wi-fi.

lizdance40 wrote:
I can't recommend anything less than 32 GB. Once you have it, you will find other uses for the iPad and fill up the storage very easily.
If you are trying to keep cost low, I suggest the iPad mini. (I can't recommend the iPad Air - lack of quality control)
Wifi only is fine, I hardly ever use anything else.
What quality control issue are you referring to with iPad Air? I know lot's of people, myself included who have the Air and there is nothing wrong with them.

My daughter accidentally purchased something from an in app purchase, I haven't got the £2.99 in my account until tuesday, and do not want the in app purchase, my account wont log in now even to download free apps. How do I get my account back?

My daughter accidentally purchased something from an in app purchase, I haven't got the £2.99 in my account until tuesday, and do not want the in app purchase, my account wont log in now even to download free apps. How do I get my account to log in again and function properly, I shouldn't have to wait until I have a meagre £2.99 in my account again do I because I need the app store for other apps etc and updating, even if it is only 3 days I want my account back, I do not want nor did I give permission for the in-app purchase and would be happy for it to be returned/credited back so I can have MY account available for my IPhone.
Please can someone give me more information or let me know how else I can get my account working again, before pay day on tuesday.
Much appreciated, Paddy.
<Email Edited by Host>

Hello paddyliverpool,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Refund is an option.
Best of luck,
Mario

How to avoid the duplicate values, I do not want the duplicate............

i have one database table called "sms1" that table is updated every day or on daily basis it has the following fields in it:
SQL> desc sms1;
Name Null? Type
MOBILE NUMBER
RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)
SNO NUMBER
INDATE DATE
From this table the is one column "RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)" . I am splitting it into different columns like :
SQL> desc smssplit;
Name Null? Type
R VARCHAR2(2 CHAR)
C VARCHAR2(2 CHAR)
S VARCHAR2(1 CHAR)
TC VARCHAR2(3 CHAR)
NA VARCHAR2(3 CHAR)
TC2 VARCHAR2(3 CHAR)
NA2 VARCHAR2(3 CHAR)
TC3 VARCHAR2(3 CHAR)
NA3 VARCHAR2(3 CHAR)
TC4 VARCHAR2(3 CHAR)
NA4 VARCHAR2(3 CHAR)
WTHER VARCHAR2(10 CHAR)
SNO NUMBER
INSERTDATA VARCHAR2(25 CHAR)
Now I am written a procedure to insert the data from "Sms1" table to smssplit table...
CREATE OR REPLACE PROCEDURE SPLITSMS
AS
BEGIN
INSERT INTO scott.SMSSPLIT ( R,C,S,TC,NA,TC2,NA2,TC3,NA3,TC4,NA4,WTHER,SNO)
SELECT SUBSTR(RCSTCNATCNATCNATCNAWTHER,1,2) R,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,3,2) C,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,5,1) S,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,6,3) TC,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,9,3) NA,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,12,3) TC2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,15,3) NA2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,18,3) TC3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,21,3) NA3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,24,3) TC4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,27,3) NA4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,30,10) WTHER, SNO
FROM scott.SMS1 where SNO=(select MAX (sno) from SMS1);
END;
Now in order to update the second table with data from first table on regular basis I have written a job scheduler and I am using oracle 9.0. version...
DECLARE
X NUMBER;
JobNumber NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'scott.SPLITSMS;'
,next_date => SYSDATE+1/1440
,interval => 'SYSDATE+1/1440 '
,no_parse => FALSE
:JobNumber := to_char(X);
END;
Now this job scheduler is working properly and updating the data for every one minute but it is taking or updating the duplicate values also ..like example:
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
Now I do not want the duplicate values to be updated ...and want them to ignore them.....
please I need a help on this query........How to avoid the duplicate values............

Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
         substr(rcstcnatcnatcnatcnawther,3,2) c,
         substr(rcstcnatcnatcnatcnawther,5,1) s,
         substr(rcstcnatcnatcnatcnawther,6,3) tc,
         substr(rcstcnatcnatcnatcnawther,9,3) na,
         substr(rcstcnatcnatcnatcnawther,12,3) tc2,
         substr(rcstcnatcnatcnatcnawther,15,3) na2,
         substr(rcstcnatcnatcnatcnawther,18,3) tc3,
         substr(rcstcnatcnatcnatcnawther,21,3) na3,
         substr(rcstcnatcnatcnatcnawther,24,3) tc4,
         substr(rcstcnatcnatcnatcnawther,27,3) na4,
         substr(rcstcnatcnatcnatcnawther,30,10) wther,
         sno
    from scott.sms1 a
   where sno = (select max(sno)
                  from sms1
                 where sno != a.sno
               ); ---------------> added where clause with table alias.
end;Regards
Etbin

HT204022 I have iPhoto, iOS, etc. all up to date.... however my iPad, iPhone, and Mac PhotoStreams all contain different pictures and aren't the same. Any ideas why? I'd rather not reset the whole thing if I don't have too.

I have iPhoto, iOS, etc. all up to date.... however my iPad, iPhone, and Mac PhotoStreams all contain different pictures and aren't the same. Any ideas why? I'd rather not reset the whole thing if I don't have too.

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

I have a MAC laptop, there used to partition windows XP but I want to change it to windows 7. and after my intstal do not want the road and a partition for windows missing. how to restore windows partition?

I have a MAC laptop, there used to partition windows XP but I want to change it to windows 7. and after my intstal do not want the road and a partition for windows missing. how to restore windows partition?

Welcome to Apple Support Communities
You have an Early 2008 Mac Pro. You have the specs that your Mac Pro needs for more memory > https://support.apple.com/kb/HT4433#4 As you can read, that computer should have come with 2 GB of memory.
You can buy memory at OWC or Crucial > http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#800-memory Those sell compatible memory with all Macs. You can use another memory, but you can be sure that the memory that these brands sell are compatible

I do not want the autorenewal option for iCloud-I want to renew at my direction. How do I achieve this?

I do not want the auto renewal option for my additional iCloud storage subscription. How do I achieve this?

iCloud- Storage upgrades and downgrades
iTunes Store- Purchasing and managing auto-renewing subscriptions

I just purchased a new ipod touch so now I have two. I do not want the second ipod touch to sync the same as the old ipod touch - 2 people with 2 different music preferences. How do I keep them separate.

I just purchased a new ipod touch so now I have two. I do not want the second ipod touch to sync the same as the old ipod touch - 2 people with 2 different music preferences. How do I keep them separate.

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

I am clearing through my phone for more memory. I want to delete some personal photos and videos of family forever, how can i do this ?. I do not want the photos or videos to be found anywhere.

I am using a Iphone 5c device on software update IOS 7.1.2. I want to delete some personal videos and photos of my family and friends and myself. I am worried that if i delete them they may still be on my itunes account or icloud account. I do not want them on any of my accounts or files anywhere, I would like them gone off of everything. How can i do this?
Thanks in advance.

The answer is not simple. First, are these images in the Camera Roll or the Photos app? Next, do you have Photo Stream enabled? Also, do you back up your phone to your computer or to iCloud, or to both?
If you have Photo Stream enabled then the images have already been distributed to anyone who is subscribed. Nothing that I can think of that you can do about that. The rest of this post assumes that Photo Stream was never turned on.
If the images are in your Camera Roll you can delete them from the Camera app. The won't go anywhere, however, they will still be in your backups.
If you back up to your computer using iTunes you can go to iTunes Preferences, Devices tab, and delete your backups. After deleting all of them, and also after you have deleted the images from the Camera Roll, do a new backup.
After deleting the backups do a Secure Delete of deleted files on your computer. On a Mac you can do this with Disk Utility; have it erase deleted files. On Windows you need to get a 3rd party "shredder" app.
If you back up to iCloud on the phone go to Settings/iCloud - Storage & backup - Manage Storage. Tap on each backup and delete it.
If you have photos in the Photos app that are NOT in the Camera Roll album you need to connect your phone to iTunes, click on the Photos tab, uncheck all of them that you don't want (or uncheck Sync Photos if you want all of them gone), then sync.
Then repeat all of the steps above.

Is there a way to increase the icon size (and the text below) without using zoom? I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

Is there a way to increase the icon size (and the text below) without using zoom in iOS 7? I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

Hello Apple.
It seems you have gone to great lengths to improve accessibility in many areas of the iPad. Why was this obvious problem with icon text size missed? (It's not with the Mac.). And for so long too.
Do you employ people with actual accessibility problems to help you do UI design?
I think too, that some buttons are too close for people who might have motor control problems.
I love my iPad but I fear as I age, the iPad might not keep up with me.

Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album. How do I get them back together again other than a playlist. I do not want the tracks showing up as albums on the Touch?

Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album. How do I get them back together again other than a playlist. I do not want the tracks showing up as albums on the Touch?

Are your tracks pat of a collection? Different artists, but still one album? Then mark them a s acollection or set the album artist. See this guide on how to group separate tracks into albums:
iTunes: Grouping Tracks Into Albums

Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS?

Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS?
It has been quite a while since Apple came up with Map App of their own and should be releasing improved maps with more capabilities in India.
Cheers!
Abhishek

No one here can answer your question, as there is no one from Apple here, & no one here represents Apple or speaks for Apple.

Framemaker uses $filename for short file name, can we edit this to change appearance? We do not want the short file name of long filename to include the .fm extension can this be removed or modified to make this happen?

Framemaker uses <$filename> for short file name, can we edit this to change appearance? We do not want the short file name of long filename to include the .fm extension can this be removed or modified to make this happen? In compiling our books it would be helpful to not have this extension appear as it then requires us to create extra files without them.

See: System Variables

If I go to a Verizon store tomorrow, Tuesday September 23, will there be any iPhone 6's available? I do not want the iPhone 6+, just the regular iPhone 6. I am looking to buy the 64 gb silver version, but will buy the 128 gb version if needed.

Similar Messages

Maybe you are looking for