If I go to PS and add layers can I bring the photo with layers back to Lightroom?

JoeKostoss wrote:
This is more complicated than I expected: I had to go back to LR to check what I did previously. Here is what I found. I hope this helps to explain what can be done. You can have both layers and LR adjustments; you just cannot see the layers in LR nor can you see the LR adjustments in PS. The good news is that they are both there and can be changed as needed.
I have a photo (Raw) of a blue jay sitting on a branch with the background out of focus.
I made many of the usual LR edits such as exposure, contrast, whites, blacks, sharpening, etc.
I wanted to print it as a Birthday Card so I sent it to PSCC 2014 as a smart object.
In PS, I added a type layer "Happy Birthday"
Back in LR, I now have a psd Happy Birthday file stacked with the original raw file.
Fine and as yet, no ADDITIONAL LR edits AFTER rendering right?
I made some LR adjustments to the psd file such as crop to a different aspect ratio and add a vignette.
I printed the psd file on a folded card.
So far so good, you're still in LR. LR can take the new edits made there AND the layers and spit out a print. Nothing new or special here.
Later I wanted to use that same image as a anniversary card.
I told LR to edit that same psd file in PSCC 2014, this time not a smart object, but selecting "Edit Original".
You got your original layered file. Nothing new or special here.
PS opened with the "Happy Birthday" type layer intact and with the smart object background layer. Of course, the LR edits, crop and vignette on the psd file were not visible in PS.
Because they don't exist there! They will when you render them.
I clicked the eye of the Happy Birthday to render it invisible.
I added a new "Happy Anniversary" type layer.
Saved the new revised psd file and returned to LR.
In LR, I still have only 1 psd file stacked with the original raw file, but now it says Happy Anniversary. Note: sometimes it may take a few moments for the new PS edits to appear. By selecting another image and then reselect this psd file tends to speed this rendering of the new image.
So where in all this is the LR edits you produce AFTER up created the layers after opening the layered doc in PS?
I now have a new card ready to print just as before with all the LR edits originally made on the birthday card including the LR edits, crop and vignette made on the original psd file.
And as far as I can tell, all those edits were applied in PS AFTER rendering.
If I send that psd file a third time to PS, I still have the smart object layer, and both type layers. I can add a 3rd type layer "Happy Easter" if I so desire and return to LR.
Again, the crop and vignette are seen in the one psd file in LR.
So...yes, I can have both layers AND LR adjustments including the original raw adjustments through the smart object background.
No, you have a layered file and you have instructions but the layered file isn't rendered with those instructions and doing so would flatten the results.

Similar Messages

I have a new Nikon D750 sitting on my desk and can't edit the photos with any adobe product? We are in full wedding season and am a little frustrated. Photo mechanics opens them right up to download them. I am using the Nikon software to convert them

I have a new Nikon D750 sitting on my desk and can't edit the photos with any adobe product? We are in full wedding season and am a little frustrated. Photo mechanics opens them right up to download them. I am using the Nikon software to convert them into tiffs. when is the camera raw update coming out. I am not the only photographer with this issue check out all the chatter about it.

This happens every single time a new camera comes out from one of the two big camera makers. Nikon and Canon do not send preproduction units to Adobe, so Adobe has to go out and buy a D750 or whatever from the store to test and profile it before they can update Lightroom. They can't get one earlier than you and I can. The profiling is quite an extensive operation. Other camera makers do send preproduction units, use dng, or do the profiling in-house and there you often get support right from release. If camera makers would finally embrace an open raw format such as dng, this whole problem would be gone but both Canon and Nikon seem to think they live in an upside-down world where their clients only use their software.
Usually the dead period only lasts a few weeks but it is frustrating nevertheless. My only advice is to not buy a new camera at the day of release and expect to have third parties to support it. You definitely should not be buying these cameras right away if your business depends on it. Aperture, Capture One, etc. have the exact same problem. No third party (read non-Nikon in this case) will support the camera from the release date. Some are quicker than other adding support. Adobe is somewhere in the middle of the pack in this respect. Nobody outside of Adobe knows when an update comes out. Could be tomorrow, could be a few more weeks or a month. They might jump straight to Lightroom 6 and never add direct support to LR 5. Sometimes they will first bring out a beta version of dng converter that will convert the new camera's nef files to dng, which will work fine in the current Lightroom before updating Lightroom itself.

Just done the 'Erase and Install', I can't find the Hard Drive I backed up my files on?

I have just done the 'Erase and Install' process, but before I did, I backed up my files to an External Hard Drive using Time Machine. I have now restored my Mac and gone through the Erase and Install process, but now, when I plug in my external hard drive, I cant find it anywhere? I've tried quite a few things, but no luck! Also, what has happened to iMovie and iPhoto and all those Applications?! They have dissapeared!

GeorgeRollo wrote:
I have just done the 'Erase and Install' process, but before I did, I backed up my files to an External Hard Drive using Time Machine.
That should mean that all of your data on the MBP is backed up to an external HDD.
- Yes, should be. But when I plug it in the Mac, no menu or pop up comes up. Showing what to do next.
I have now restored my Mac and gone through the Erase and Install process, but now, when I plug in my external hard drive,
If you restored your internal drive with Time Machine, did you then ERASE and install? What did you erase and what were you installing? What is on the external HDD that has the Time Machine backup on it?
- I talked to the Customer Support and they said just erase the Startup Disk or something? So I did. Because I basically just wanted to restore my Mac.
I cant find it anywhere?
What is it?
- The External Hard Drive when I plug it in.
I've tried quite a few things, but no luck!
What are 'quite a few things'?
- Things that I have researched like going into 'Finder' then going into 'Preferences', 'General', then ticking 'Hard Drive' under the option of 'Show these items on the desktop:'
what has happened to iMovie and iPhoto and all those Applications?! They have dissapeared!
I would think that they should be on the Time Machine backup (assuming the external HDD has not been erased) if not the internal HDD.
- Hopefully if I can figure out this.

I took my SIM card out of my iPhone 4S and now I can't text the people with only iMessage like people with iPod 5 and with iMessage I can't text them back but I can text people that has

Please help asap

If you took the SIM out you will not be able to use SMS because you need a cel carrier for that.

I am using photos . I add a camera and make my photos slide in. How do I add a second behavior to the photo to make it slide out. I want the photo to hold on the screen for a few seconds in between sliding in and sliding out.

I am using photos in Motion 5. I add a camera and make my photo slide in. How do i add a second behavior to the photo to make it slide out? I want the photo to hold for a few seconds in between sliding in and sliding out. When I am trying to do this I am not getting the photo to hold, i am making one continuous motion which I do not want.
Thanks

Are you using the "motion path" behavior? If so just duplicate it and drag it down the timeline to where you want it to start. Trim it to end at the end of the project. The gap you leave in the timeline between the two behaviors is your hold time. Not sure why you are using a camera unless you have a behavior on the camera.If you are using keyframes just set two keyframes at the same position values in the inspector for the hold time.

HT201317 How do I add existing photos and albumns on my iPhone to the photo stream?

How do I add existing photos and albumns on my iPhone to the photo stream?

Welcome to the Apple Community.
The easiest method is to connect your device to iTunes, transfer the photos to your computer and add them to photostream from there. If you only have a few photos to add, you could take a screenshot of each one.

Is there a way to save an image file as a jpeg and add -web or -print to the file name?

I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name. This way I can easily see which files are lower resolution for web posting or high resolution for printing.

Jason,
I helped somebody do a very similar thing about a week ago.
The trick is to use the Batch command's ability to construct a file name.
Tell the batch to append, e.g. "-x" without quotes, to the name of each saved file.
The batch runs an Action which does a save as JPEG, resize image, add logo, save as JPEG, then close document.
The output is "<document name>-x.jpg" and "<document name>-x-x.jpeg".
Then use Windows Explorer to rename "*-x-x.jpg" to "*-print.jpg".
Then rename "*-x.jpg" to "*-web.jpg".
See http://forums.adobe.com/thread/1038992?start=32
The name construction that I used there was just an "x" appended to the document name. Use whatever you like. Also juliew subsequently referred to the method as a "double-batch" run, although it is not. One run of the batch will output two JPEGs for each input document.
I hope the disagreements in that thread don't cause too much disruption.
If you want, the Batch command itself can be recorded in another Action which would store the parameters of the batch, then you could run that Action anytime without having to set up the details of the batch each time. It would always output to one specific folder, though.

I have photoshop Elements 12 a and I can pull up the photo but can't edit it. Crop it. Add text. Does anyone know how to fix this?

I have photoshop Elements 12 a and I can pull up the photo but can't edit it. Crop it. Add text. Does anyone know how to fix this?

Apparently it's related to the Firefox plug in.
This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
2. Select to "Options
3. Select "Applications"
4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
5. Open a test PDF. It should open in it's own window now.
Again, not a complete solution but something that'll at least let you scroll with PDFs open.
More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

I have a new IPAD. There are no "list", "date," and "add a reminder" buttons on the Reminder app. There are also no "calendar" and "add an event" bottons on the Calendar App. Why?

I just bought a new IPAD. There are no "list", "date," and "add a reminder" buttons on the Reminder App. There are also no "calendar" and "add an event" buttons on the Calendar App. Why? Is there a way to add either a reminder or an event?

For the reminders app - just tap on an open space on the ruled paper window under the heading in order to create a new reminder. Or tap on the + sign in the upper right corner of the app. You do not have the + sign on the app?
For the calendars app to go Settings>iCloud>Calendars>On. Toggle the setting on and off and the + sign should appear in the lower right corner of the calendars app. Tap the + sign to create a new event.

I have several folders setup in my Safari. However, when I try to add a website to them, it never appears. When I add a folder and add a website to it, the website appears. Help?

I have several folders setup in my Safari. However, when I try to add a website to them, it never appears. When I add a folder and add a website to it, the website appears. Help?

I thank you for the response. Apple does some assinine things sometimes and this is one of them. Ask the planet the difference between a movie and a home video and with the exception of Apple, you'd get 100% consenus on the what difference is. A home video is something that I shoot, like my kids birthday party. A movie is something I urchased either via download or a DVD that I ripped. Unbelievable! The fact that Apple has chosen not to distinguish based upon which folder I tell it is Movies and which folder is Home Videos is really hard to fathom - sounds like something Windows would do. I find it funny that in my iTunes movies sub-section of the movies section, the movie icons have a cloud icon in upper right corner to distinguish it as bought from Apple iTunes versus no cloud icon for movies that I have ripped - so the distintion was already made and clearly visible. Now - everything just defaults to "home videos" if I try to import a new ripped DVD - why even bother to have this distinction on the iTunes bar? WOW!
As for your direction, I do not understand what you are telling me - what Media Kind and what Options tab are you referring to? I see no Options tab in iTunes. Right licking on the movie icon does not yield media kind or options as well. Gping to the source file does not yield these options either.
Thanks again for your help.
Clay

Hello I have problome with YouTube on my apple tv. When I add playlist on my Mac I can see the movies and play them but I can't see the movies on my appletv only the name of the playlist and I am can't watch the movies. Anyone know the problome? Please..

Hello I have problome with YouTube on my apple tv. When I add playlist on my Mac I can see the movies and play them but I can't see the movies on my appletv only the name of the playlist and I am can't watch the movies. Anyone know the problome? Please..

Geesh - all this information and no one has any clue to this? Not even someone from Apple?
Can someone at least point me in the right direction?

How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line ?

How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line, on windows ?
firefoxe... -option? <addon name>?....?

Does opening this page help: <b>about:addons</b>
*https://developer.mozilla.org/en/Command_Line_Options

I need to find all XML elements and add a line break to the text of each of them

I need to find all XML elements and add a line break to the text of each of them.
Is this possible with a script?

I need to go from this ...
to this...
but looking for the XML elements (not paragraphs) and then adding text ...
Thanks for your attention !!!

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

While I am looking the photos on orkut-album the the rotating icon to enlarge the photos are not workin and I am unable to see the photo in big size.

Sir/Madam, While I am looking my photo album on orkut, The formatted photos displayed on the screen, but when I click on any photo the rotating loading icon is not working and I can not see the photos on big size. Please reply.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

If I go to PS and add layers can I bring the photo with layers back to Lightroom?

Similar Messages

Maybe you are looking for