If I had a font I used in CS6, how do I import it into CC?

No worries.
If you are using a font manager, it will either have an activate or install option in it. The help file for the particular font manager likely has the process written down.
If you are not using a font manager, then depending upon your OS, you simply install them. I am using Windows and so installing a font is as easy as right-clicking on the font file and choosing install. I have no idea how to installa font on a Mac if that's what you are using. Either OS font installation can easily be Googled, though, if you are not sure.
Mike

Similar Messages

It seems cranky sometimes works, somtimes not. My other issue - is there a way to create a mail signature using the font I use in Outlook (or can I import that signature)?

I have a new iPhone 4s - having lots of trouble with Siri. It seems cranky - sometimes works, somtimes not. My other issue - is there a way to create a mail signature using the font I use in Outlook (or can I import that signature)? How can I find fonts availble on my phone?
Thanks for any help

Not in Acrobat unless your image is already in the PDF format.
This is a feature of forms created with LiveCycle Designer.

Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in?

Air MD792E/A, iPAD WIFI CELL 32G Space Grey
Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in? Tried to sync with itunes but iTunes can't sync without a password. I cannot see summary on the side bar. How do I restore so I can restart my iPAD Air since it has relatively no history. I have not had the chance to use it yet. Finished set up to as far as the start menu.
<Personal Information Edited by Host>

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Hi, I am using Indesign CS6, How to set the page size in Inches.

Hi, I am using Indesign CS6, How to set the page size in Inches.

All fields in InDesign can be entered in any measurement system. So, if you want to make an 8"x10" document and go to File>New Document and the window looks like this:
…you can type either 8 in or 8" into the Width field like this:
…and when you move to the next field, it will convert the eight inches into the equivalent number in the unit of measure that it is using at the moment, like this:
… (203.2 milimeters is the same as 8 inches). You can also enter a different measurement unit into other fields once the file is created, such as the width or height of a frame, or the position of an object in the X and Y coordinates.
If you would rather just work in inches instead of having to type the inches mark or abbreviation, go to InDesign>Preferences>General and select the Units & Increments tab. There you will see Ruler Units for Horizontal and Vertical at the top of the window. Set them to Inches and all of the fields will display in inches. If you do that to an open document, you will change the unit of measure for that document. If you do it while no documents are open, it will change the unit of measure for any new documents you create. To change the unit of measure for existing documents, you will have to open each and make the change.

Using Illustrator CS6, how to preserve drawn colors when Save For Web to PNG?

Using Illustrator CS6 on Mac OSX 10.9.1:
step 1. I open a new file for Web profile.
step 2. I verify that File > Document Color Mode is RGB.
step 3. I draw a square and set it's color to 0,103,197 (decimal).
step 4. I click File > Save For Web
step 5. In the popup that opens, I set to PNG-24, and verify the option Convert To sRGB is not selected.
step 6. Using the Mac's DigitalColorMeter, I observe the color is 0,109,191 in the Save For Web popup. If I save it, then open the saved PNG file, it's color is also 0,109,191.
How to do this so the colors don't change?
step 7. I close Save For Web popup.
step 8. I verify Edit > Color Settings for Working Spaces is set to Monitor RGB, and that the Color Management Policies for RGB is off.
step 9. I verify Edit > Assign Profile is set to Don't Color Manage This Document.
step 10. I verify View > Proof Colors is off.
Can anyone provide a set of Illustrator CS6 settings that let me save a PNG image with the same colors it's drawn in so I can use that PNG image in a website?
I must be missing something obvious, because anyone working in web design must do this day in and day out, please let me know what procedure people follow to achieve this.
UPDATE:
Using the above procedure DOES preserve the colors when embedding the PNG image in a webpage viewed in Firefox and Chome, but NOT for Safari. Also, the colors are not preserved in Mac's Preview software, as well as Microsoft Office 2011 for Mac.
I'm pretty new to all this. Hoping someone can provide some perspective on what typical procedure people use for web development when working with colors in Illustrator CS6.

Using Illustrator CS6 on Mac OSX 10.9.1:
step 1. I open a new file for Web profile.
step 2. I verify that File > Document Color Mode is RGB.
step 3. I draw a square and set it's color to 0,103,197 (decimal).
step 4. I click File > Save For Web
step 5. In the popup that opens, I set to PNG-24, and verify the option Convert To sRGB is not selected.
step 6. Using the Mac's DigitalColorMeter, I observe the color is 0,109,191 in the Save For Web popup. If I save it, then open the saved PNG file, it's color is also 0,109,191.
How to do this so the colors don't change?
step 7. I close Save For Web popup.
step 8. I verify Edit > Color Settings for Working Spaces is set to Monitor RGB, and that the Color Management Policies for RGB is off.
step 9. I verify Edit > Assign Profile is set to Don't Color Manage This Document.
step 10. I verify View > Proof Colors is off.
Can anyone provide a set of Illustrator CS6 settings that let me save a PNG image with the same colors it's drawn in so I can use that PNG image in a website?
I must be missing something obvious, because anyone working in web design must do this day in and day out, please let me know what procedure people follow to achieve this.
UPDATE:
Using the above procedure DOES preserve the colors when embedding the PNG image in a webpage viewed in Firefox and Chome, but NOT for Safari. Also, the colors are not preserved in Mac's Preview software, as well as Microsoft Office 2011 for Mac.
I'm pretty new to all this. Hoping someone can provide some perspective on what typical procedure people use for web development when working with colors in Illustrator CS6.

I am trying creative cloud but want to use flash cs6 how can i do this?

i am trying creative cloud but want to use flash cs6. How can i do this? I need to use action script 2.0
Would appreciate any help.
Thanks
-Alex

If you want to purchase CS6 it can be purchased thru the page linked below:
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also use CS6 as part of your sunscription to the Creative Cloud.
If you want to get the trial version of CS6, you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

I have just had all my video converted to DVDs and now I would like to edit them...how do I import them into imovie?

Can somebody help me figure out how to import my home videos from a DVD into imovie?

That means 'reverse engineering them'!
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

HT1212 I have an ipod touch 3rd gen. I am locked out of it and it tells me to connect to itune. But i cant beacuse its been so long since i used it. How to I get back into it?

My friend let me use her apple id so i could wright you guys. I cant get in to my ipod touch. I lost it a while a go and just found it. I cant rember my itunes id or password to it. I also cant rember the pass word to the ipod. Now it says connect to itunes but i cant do that. So can you please help me? Thank you, Maddy

Read the article that you linked

I had CS4 and have now installed CS6, how do I uninstall CS4?

I need some additional space on my C drive so I now need to uninstall CS4 - do I need a special uninstaller to do this?

Hi david103,
Please refer: http://helpx.adobe.com/creative-cloud/help/install-apps.html#Uninstall apps
Thanks,
Atul Saini

Finding Fonts in Fireworks - Why Does it Always Start at the Top, Instead of the Last Font You Used?

I've been using Fireworks for many years and I love it (currently using CS5). But I live irritated with the way it starts at the beginning of your font list when you're selecting a font - instead of going right to the last font you used, which is how many other programs work.
Is there a way to change settings in Fireworks so it'll do this?
Thanks in advance for any help you can offer!

I scanned that article and it explains how to set the number of recent fonts shown at the top. But here's what I was talking about...
Let's say you're working on something and you have your text highlighted and you're working down the font list trying different fonts. You try a few A fonts, then B fonts, and so on, down the list. Well, instead of Fireworks bringing you back to the current font IN THE LIST, everytime you go to try another font, it starts back at the top, and you have to scroll down and find where you were in the list ALL OVER AGAIN EVERY SINGLE TIME.
In Illustrator, when you have the Character box open, it does exactly what I'm describing. If you have some text selected, every time you change the font and go back to the font drop-down, it takes to you to where you are. If Myriad is the font you are currently using, it doesn't start you back at the top when you go to the drop-down to find another font. It takes you to Myriad in the list.

Can you import jpegs into Livetype as fonts?

I have a logo, in which I have broken up all the letters into separate jpegs, so I can animate them in. Unfortunately Motion has limited animation for objects that are not fonts, and as far as I can tell, livetype will not animate anything but fonts. Can someone help me figure out how to...I guess create a font in which these different jpegs would make up the letters of the font, and import that into livetype? Thank you!

You pose and interesting question. Live Type works best when you use the exisiting fonts provided in the program
Yes you can import jpegs into Live Type and you can use the pre-fabricated effects to animate them if you please, you can even modify many of the effects.
If you have a just a few elements of a logo you may be able to create what you want relatively fast. You can do this in Motion as well, where you have more control, although IMO the learning curve is steeper in Motion. For that matter you could keyframe and animate in Final Cut Pro as well.
If you choose to try this in Live Type then go to File>Place and select each of you jpegs indivudually.
Good luck and post back if youhave more questions

How do I import and use the Keynote themes that I've downloaded?

I'm sure this is a stupid question, but I searched this forum & didn't immediately find the answer I needed. I've downloaded some Keynote themes (they have a .kth extension). How do I import these into Keynote 08 so that Keynote will recognize and use the themes?
Thanks!

Put the .kth in "Themes" folder under the route Home > Library > Application Support > iWork > Keynote > Themes - it will then appear (at the bottom) in the theme chooser when opening keynote.

I saved and backed up my bookmarks using Foxfire. It save them in bookmarks-2011-04-03.json. Now how do I export them into my Current Foxfire?

I saved and backed up my bookmarks using Foxfire. It save them in bookmarks-2011-04-03.json. Now how do I import them into my Current Foxfire?

Please click the '''Helpful''' button next to the answer that solved your Firefox support issue, '''when you are logged in''', so this thread gets marked as '''Solved'''.

Importing Video into iMovie using Mac the Ripper

How do I import video into iMovie using Mac the Ripper? I ripped the video content onto my computer but it was not converted into a file that I can import.

I think it's trend for all users since we can get more funny from digital life. Also it's necessary sometimes for us to save our video or dvd files with other methods, i have no idea but use something like converters.To my experience, mactheripper is not what you want,maybe you can try this dvd ripper for mac.Maybe ripper is illegal, but i just get my oringinal files, and i want to do more with it, that's just it!

Is there a way to see what font was used originally, after the type has been converted to outlines?

Hi all, I would really like to know if there is any way to find out what font was used originally in an Illustrator document, after the type has been converted to outlines? The reason for this is I need to update some wording in a couple of old logos I had made and I have NO idea what font I had used...for the life of me I just cannot remember. Because this was so urgent for one of my projects I had to do a search online via "WhatTheFont" to see what font it could be (which I then didn't seem to have in my library!), and repurchase it. I am 99% sure I HAVE the font - or something VERY close - but under a different name.
Normally I keep a much better record of fonts used but there have been times occasionally in the past when I have done something in a hurry and changed the type to outlines without keeping the original, or keeping detailed notes at least. The fact that I did NOT keep notes on a few projects I have done in the past has made me want to kick myself because now I need to revisit one of those again..grrr:)
Can anyone offer any advice? I appreciate your help as always:)
best,
Christine

Christine,
You can also ask in the Typography forum,
http://forums.adobe.com/community/design_development/typography?view=discussions&start=0
The guy running whatfontis is a regular poster there.
And apart from
http://www.whatfontis.com/
there are
http://www.identifont.com/
http://new.myfonts.com/WhatTheFont/
and especially for script,
http://www.bowfinprintworks.com/ScriptIDGuide.html

If I had a font I used in CS6, how do I import it into CC?

Similar Messages

Maybe you are looking for