If I have a bootable copy of a disk running 10.4.11, is there any reason I can't swap out the internal drive of a newly purchased Mac Pro and have it boot from the tiger disk? Thanks very much for any insight.

or is there some sort of built in protection against this.

In addition, if you are talking about an older machine like a G4 or earlier with PATA drives, the Mac Pro uses SATA drives, so this is not a simple swap out, but if there's room an adapter like this might work in that situation:
http://eshop.macsales.com/item/Sonnet%20Technology/TPASA/
so that you could use the drive in the new computer to copy the data files, not for booting the OS.
If you need to transfer files from one machine to the other, you could do this over a network, or use FW target drive mode, or get a universal bare drive cable adapter.
http://eshop.macsales.com/item/Newer%20Technology/U3NVSPATA/

Similar Messages

Can't find Leopard Installer Disc for Mac Pro and Need to Boot from Disc.

Any chance I can create a bootable DVD for my Mac Pro without having the original to duplicate?

This has to do with the mouse lag/freeze problem people have been having, by the way. Just about any 10 consecutive seconds that I use my mouse, it freezes then jumps a little ways away - which is seriously hampering my ability to finish this editing project.
It's been suggested this is a directory problem, which is why I'm looking for the boot disc. If anyone has any other advice on this, I'm all ears.
I've already changed out the hardware and run disk permissions, etc., to no avail.

HT5070 Downloaded an epidose of Glee. Trying to open it for viewing causes iTunes to crash. Why? Thanks very much for any assistance.

Downloaded last weeks episode of GLEE. When it was finished, I checked the "Season Pass HD" radio button to see if what I had downloaded was in HD (which I wanted), vice SD. I saw that what I had was indeed HD, and at the box prompt I "x'd" out of it instead of completing the box - which would have caused me to pay for the season...which I do not want at this time.
I cannot open the episode. Trying causes iTunes to crash.
Any ideas why?

Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme..

Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme.

This will work.....IF....you also have an Apple AirPort router configured to provide your wireless network.
In other words, you need to have two Apple AirPort routers to extend a wireless network.
When the AirPort Extreme is configured to "extend" the wireless of the "main" AirPort, it will provide more wireless coverage and the Ethernet ports are enabled, so you could connect your Mac Pro to any of the Ethernet ports and use that as a network and Internet connection.

Hi i haven't updated my iDVD seen 2005 and to get the new one i need 7.0.4 first and i downloaded it from the apple website and when i go into the updating process its says "An eligible iDVD application was not found in the location /Applications." why"

Hi i haven't updated my iDVD seen 2005 and to get the new one i need 7.0.4 first and i downloaded it from the apple website and when i go into the updating process its says "An eligible iDVD application was not found in the location /Applications." why

Because you need to buy iLife 08 or newer on DVD first. If you're using iDVD 05, you probably have a PowerPC Mac and can't use iLife 11.
(69573)

How much real world difference would there be between the 1600MHz memory of a 4,1 Mac Pro and the 800MHz memory of a 3,1 Mac Pro? My main app is multitrack audio with Pro Tools. Thanks so much.

How much real world performance difference would there be between the 1600MHz memory of a 4,1 Mac Pro and the 800MHz memory of a 3,1 Mac Pro? My main app is multitrack audio with Pro Tools. Thanks so much. The CPU speed of either one would be between 2.8GHz and 3.0GHz.

What are the differences.... firmware and build, there were tweaks to the PCIe bus itself. As a result 3rd party cards and booting is better.
Support in 5,1 firmware for more 56xx and W35/36xx processors. Also memory timing.
The 4,1 was "64-bit boot mode optional" and 5,1 was default. I don't know if there are changes but I assume so, even if it is not reflected elsewhere or in version number.
I don't know what the prices are but 2009, to buy one today, when the 2010 is $1800.
The 2008 of course was test bed for 64-bit UEFI and it sure seems even Lion and then ML are not as well engineered - outside of Linc who would be the least likely to have a problem.
I would assume 2010 has better support for 8GB and even 16GB DIMMs as well as for 1333MHz.
Nehalem family had only come out in fall 2008 and a lot of work went into making improvements well past 2009.
If you remember, there were serious heat problems with those and 10.5.7+ up thru 10.6.2 even with iTunes, audio, and hyperthreading and cores hitting and staying in 80*C range. That I assume was both poor code (sleep does not mean poke and ask constantly) as well as changes in SMC and kernel improvements, to work around. Microcode can be patched in firmware, kernel, by drivers and by code, but it is best when the chips and core elements don't need to be.
If someone is stretched, and can get 2009 for $1200 it might be a fine fit. That year offered the OEM GT120 which isn't really as nice and matched for today both OS and apps that rely on a GPU. And for odd reasons two such 120's don't work well in Lion+ but that is probably minor. Having the 5770 is just "nicer" though.
There are some articles about trouble booting with PCIe SATA/SAS/SSD and less trouble with 2010. Also support for graphic card and audio I think was one of those "minor" 5770 related support issues. But shows some small changes were made there too.
I wish someone would come out and pre-announce DDR4 + SATA3 along with PCIe 3.x (for bandwidth and more power per rail) along with say Ivy Bridge-E socket processors was going to be this summer's 3 yr anniversary and to replace the 2010 designed motherboard. But that is what is on Intel's and others drawing boards simmeringn in the pot.

Did anyone else notice the new Iain Banks Audiobook Use of Weapons appear and then quickly disappear from the store a few days ago, or did I imagine the whole thing?

Did anyone else notice the new Iain Banks Audiobook 'Use of Weapons' appear and then quickly disappear from the store a few days ago, or did I imagine the whole thing?

Did anyone else notice the new Iain Banks Audiobook 'Use of Weapons' appear and then quickly disappear from the store a few days ago, or did I imagine the whole thing?

I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

Was the FCS on your old machine an upgrade? You will need to enter your original, full version serial first, and then you will be prompted for the upgrade serial number.
Hope this helps.
MtD

There software for net gear PS121 usIsb print server? Just purchased Macbook pro and have Netgear wireless printer router

Is there software download for net gear PS121 usb print server? Just purchased Macbook pro and have Netgear wireless printer router that has worked well for years on windowns. I have searched with minimal results

Check with NetGear for Mac OS X Lion driver/software.

How do I properly zero out or erase the hard drives in my early 2009 Mac Pro 4,1 tower?

How do I properly zero out or erase the hard drives in my early 2009 Mac Pro 4,1 tower?
I assume there are already instructions on Apple.com someplace but haven't seen them yet… I have to one terabyte drives one the operating system the other is blank I want to start fresh I want to zero out both drives but I didn't want to make any mistakes
I know I can use disk utility to 0 Out Dr., #2 that means I will have to take out the operating system hard drive out of my 2008 Mac Pro and put it into my 2009 Mac Pro to use the disk utility to zero out drive one the OS drive in my 2009 Mac Pro am my correct
I just need a little bit a help I want to go slow so I don't make any mistakes with the sleds or with the erasing process which journaled to choose encrypted or not etc. etc.
Furthermore is there instructions on the site on how to change the hard drive into a different sled because the sleds and my 2009 are different than my 2008 any advice
Thank you

I'm doing this because my friend told me that zeroing out the drive can nap bad sectors and also later for some kind of diagnostics usage of the drive or something like that he wasn't really clear
My friend was really specific he said choose the option that writes zero's once over the drive that is plenty good enough I was inclined to use the maximum seven write ...I just want to make sure the drive has no bad sectors and that's it's it's zeroed out for possible future diagnostics usage or something that he said was usable later
he also advised me to run a test on it but I don't have the software you mentioned or the software that he has… So I may have to take the drives over to his house unless you have some kind of free software that's easy to use that you could suggest that will not only zero out the drive but test the drive completely
I am completely new to Mac I'm no dummy but at the same time I'm not super technically capable I mean I can surprise myself I'm pretty good but I need a good teacher… How expensive is this lifeguard software?
Thank you

I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?

As the title says.
I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
I don't want to restart it because im scared that something might go wrong.
operating lion

LimitLess- wrote:
Hi,
I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
Thanks
I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread.

I just installed a 3TB hard drive on an early 2008 mac pro and the system doesn't recognize the drive. What now?

I just installed a 3TB hard drive on an early 2008 mac pro and it is not recognized/not visible. What now?

If the drive is correctly installed on to the sled, and the mounting screws are snug, not tight, and the sled is inserted properly so that all the roof-tangs catch as the sled is inserted, failure to show up in Disk Utility means the drive is not useable.
A Bug in 10.8.4 and later precludes Disk Utility ERASE-ing large drives in Internal bays. Use PARTITION only, and create one new partition, GUID partition Map, Mac OS Extended (journaled) Volume.

TS1702 Hi I bought Final Cut Pro X to my old macbook but the week later I bought a new bacbook pro and wonder how to download the final cut program to my new mac.I find the item in iTunes, but not in apple store.I find Final c in fins, but iTunes can't d

Hi I bought Final Cut Pro X to my old macbook but the week later I bought a new bacbook pro and wonder how to download the final cut program to my new mac.I find the item in iTunes, but not in apple store.I find Final c in fins, but iTunes can't download

Use the Mac App Store application and go to the purchased tab, which you'll find at the top of the Mac App Store window.

Mac Pro 2008 won't boot from install disc - black screen

Hello,
I recently purchased a new hard drive to replace the original that came with my Mac Pro 2008. I was able to format the new drive using Disk Utility. I am now at the point where I need to install OS X onto the new drive, but the computer refuses to boot from the disc. The disc is recognized by the computer (I can access the disc and am able to use the BootCamp applications, etc.) but I just get a black screen when trying to boot directly from the disc. The computer boots fine otherwise.
I have tried the following:
I have tried using both the gray install disc that came with the computer and the Snow Leopard Install DVD disc.
I have tried booting using the "C" key and the "option" key but still receive a black screen following the chime (I've held these down for several minutes).
I have tried restarting from either install disc using the Bootcamp Assistant.
I have tried running the installation software to get it to restart from the disc.
I have tried a combination of the drives, i.e. trying to boot from the discs with just the new drive installed, just the original drive installed, and with both in bay1 and 2.
Everything results in the computer starting up, hearing the chime, and then nothing..just black screen. I have the original drive partitioned with BootCamp with OSX Snow Leopard and Windows 7 installed (I don't know that that matters).
I am at a loss as to what to try next. It doesn't seem like the superdrive because it is recognizing the disc, it just won't boot from it.
Any help is appreciated, thank you.

Clone should be a must and easy to do and learn (learn by doing! 2)
6800 would 'qualify' as 5x70 series flashed etc and same rule: 10.6.5
In the past there was 10.4.6, 10.5.6, but not 10.6.6 - even though strong need for such a DVD.
10.6.8 DVD would be excellent
Lion or ML - buy, download, make an installer flash card would be what I would do at this point.
Then keep both - dual boot as you learn and test and see what ML does and waht you had that required Rosetta to support PowerPC. See www.roaringapps.com about that.
With Carbon Coyp Cloner - was share, now commercial, great utility been around since 10.2.2 at least - this time 2003. 10 yrs.
You can clone the system folders, you can even selectively choose. You can skip copy of most of your home account and do that separately to another drive if you want.
Clone Windows with Paragon or WinClone and use Windows 7 or 8 DVD to do a system repair (automatic) or to edit the BCD file. It can and should - and all you do is boot Windows 7 DVD w/ only the one drive present and go at it. Piece of cake. But yes, Windows gets fussy if you change or remove or move. BCD to the rescue. A proper program for cloning like Paragon's "Clone OS" meant for going from disk drives to SSDs, knows that and how to do it.
Back to how to clone etc:
Clone
Disk utility has RESTORE which will also clone your system but not the Lion Recovery partition. Oddly Apple did not 'endorse' making bootable clone of the system which works too but most choose Carbon Copy Cloner - it works more consistently; it allows for smart update of the backup volume. Both can backup to a sparse disk image if desired.
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
The DVD is dependent on your hardware. And your hardware changed. The drivers for the 5780 and 6xxx are bundled in the OS and lacking. Minimum build thing.
Put the new drive anywhere you want. Does not matter. Can move it later. Can be drive bay 0-3 or a Firewire external or under the DVD drive.
When you clone pull the old drive and boot from the newly cloned.
After that keep a backup clone around all the time. Takes less than 10 minutes to do a smart update to copy just the changes to keep it current. So you have working copy of the system. I keep Clone "A" that I keep "as was" the system as of last month or whatever (like 10.7.4 before upgrade to 7.5).
Comes easier after doing it once and have all your ducks in a row.

I want to replace the hard drive on my IMac but want to know how to transfer from the time machine external hard drive to the replacement drive?

I have reached capacity on my IMac hard drive. It is a 250 GB drive. I have an external drive backing up using the time machine utility. My question is once I replace the HD on the IMac, how do I load the new drive with the back up from the external drive?

So many possibilities.
I am not an expert, but I have learned this much is doable:
Buy an external enclosure to re-use you old drive.
Buy a new external drive at least as large as as your intended new internal drive. Make it self-powered.
Download CarbonCopyClone (free download, relatively small).
Make a CCC clone of the original disk on the new external disk
Install the original disk in the external enclosure.
Install the new disk in the main system.
Boot from that new external drive that has the carbon copy clone. CCC will be installed on it and it will be bootable.
Use CCC on the external to directly clone back to new drive you install in the main system (the "bootable" flag will copy).
NOTE THAT AT NO TIME IS YOUR ORIGINAL DISK BEING OVERWRITTEN IN THIS PROCESS. YOU CAN ALWAYS GO BACK AND REINSTALL IT.
Step 1 makes your old disk resuable as a spare copy for "anything".
Step 2 gives you something to use as CCC for after the recovery process.
Step 3 gets the software needed for cloning
Step 4 makes a bootable saved copy of your current system
Step 5 shifts your old disk to a usable place
Step 6 positions your new disk
Step 7 boots your existing install of OSX (just from a different drive)
Step 8 puts your original install on your new disk.
Now you have a bootable larger hard drive, and a bootable copy on a drive large enough to save all you can store on your new internal drive. And you have your old disk to use for "anything".
Now you have TM backup in one place, and CCC backup in another.
Two backups is better than one, and one of your backups is bootable in case of system failure.

If I have a bootable copy of a disk running 10.4.11, is there any reason I can't swap out the internal drive of a newly purchased Mac Pro and have it boot from the tiger disk? Thanks very much for any insight.

Similar Messages

Maybe you are looking for