If I hilite a line then scroll down a ways, is there a way to jump back to the hilited text?

If I hilite a line on a web page then scroll down a ways, is there a way to jump back to the hilited text?

Not a solution.
If you are reading an article etc, and scroll way down to see comments for example, and want to return to where you were, a simple way is to highlight a few lines.
Yes, you can scroll back, but is there a way to "snap back" ?
If you are typing into a field, and scroll away, you can hit space to return to the point you were typing, etc.
Just wondering if there is a way to snap back to your hilited section...

Similar Messages

When I am on my home screen on the iPhone, swipe left to the search page. Put a letter in the search field. then scroll down. eventually you get to all your texts previously deleted or not. The are all there. How can I clear the entire text from the phone

When I am on my home screen on the iPhone, swipe left to the search page. Put a letter in the search field. then scroll down. eventually you get to all your texts previously deleted or not. The are all there. How can I clear the entire text from the phone

When I am on my home screen on the iPhone, swipe left to the search page. Put a letter in the search field. then scroll down. eventually you get to all your texts previously deleted or not. The are all there. How can I clear the entire text from the phone

Every time I open a new safari page and scroll down it jumps back to the top of the page. mac book pro, newest version of OSX. Thanks all!

every time I open a new safari page and scroll down it jumps back to the top of the page. Happens super inconsistently and not on every web page. Tried all the dum dum moves like restarting computer and changing scroll direction in track pad. Anyone else have a similar issue? mac book pro, newest version of OSX. Thanks all!

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

My macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?, my macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?

my macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?, my macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?

How much free disk space do you have and how much memory do you have, running which operating system? Need that information to have any basis to make recommendations.

Interactive Form jumps back to the cursor when scrolling with the mouse

In an interactive form over multiple pages, the user should enter some fields and will then scroll down - usually with the mouse's scrollwheel. As long as the cursor is in an active field, adobe reader keeps jumping back to the place the cursor is active... So it is not possible to scroll down.
Scrolling down by sidebar works fine.
As a workaround, I can place the cursor outside of any entry field (just by klicking any text within the form) and scrolling down works fine again.
I guess this is a "feature" and not a bug - but it is driving our users crazy!
Any suggestions or ideas about how I could get scrolling to work will be highly appreciated.
Adobe Livecycle Designer ES 8.1.2
Adobe Reader 9.4.0

Hi Nicolas,
I am using 8.2.3 ADLC with 9.X reader (for sure this may not be any version dependent as such)
I didn't find any such behavior, and I never heard about it earlier.
Some how I feel this is not a feature nor bug in adobe, its something with your form. may be there is a set focus cdoe somewhere or so.
can you send me the form to test it in my local pc ...?
cheers,
Sai

After a few minutes, the page down won't work without clicking the mouse pointer on the page I am reading to activate page down again. Is there a way to go back to page down working every time without having to click the page first?

Question
After a few minutes, the page down won't work without clicking the mouse pointer on the page I am reading to activate page down again. Is there a way to go back to page down working every time without having to click the page first?

Today, two other users reported issues with the back-forward history list dropping down if they hovered the mouse pointer over the back or forward button -- without clicking -- and then moved the pointer downwards. One user was on a touchpad, I don't know about the other user. Are you experiencing anything like that?

Please help me... I reset the setting of my ipadmini then it turned black for 4hours now and it never came back to the way it was before. i need you help quick. thanks in advance.

Please help me... I reset the setting of my ipadmini then it turned black for 4hours now and it never came back to the way it was before. i need you help quick. thanks in advance.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Message was edited by: Diavonex

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. Any ideas?

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?

When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it

When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it.
I have been playing whole movies before from VLC without problems.
Any Ideas?

Welcome to the Apple Community.
Yes it's network issues or settings that cause these types of problems most of the time.
The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

Firefox navigation bar no longer has lines in between suggestions/sites. Is there any way to readd them?

Firefox navigation bar no longer has lines in between suggestions/sites. Is there any way to readd them?

This is a duplicate of https://support.mozilla.org/en-US/questions/939644
Closing this thread.

TS3694 I am using iphone 3gs, I upgraded my i-os to 6.0 from 5.1.1 however I am facing performance issue, along with this all the applications including settings or any other shuts down automatically. Is there any way by which I can use my phone in better

I am using iphone 3gs, I upgraded my i-os to 6.0 from 5.1.1 however I am facing performance issue, along with this all the applications including settings or any other shuts down automatically. Is there any way by which I can use my phone in better way?

No, downgrading from any version of iOS to an earlier version is not supported.

Macbook pro 2008 startup with lines then shuts down

I have a 2008 macbook pro that will startup with lines on display then shut down.

Hope when reading this will help with issue, further down this page Resolve startup issues and perform disk maintenance with Disk Utility and fsck - Apple Support
and Mac OS X: How to start up in single-user or verbose mode - Apple Support

PowerMac G5 Dual 2.5 - Red Circle w/ Line Then Shut Down

Hi all,
Just floating this question on the forum after some fruitless research. This is my friend's issue, and I wasn't personally there for it. I just type WAY faster than he does.
Here's his setup:
Power Mac G5 Dual 2.5 Ghz w/ 8 GB RAM
OS 10.5.8
500 GB WD Caviar Black Hard Drive
It's his Pro Tools rig (PT TDM HD3 7.4.2)
I assisted him in upgrading from Safari 4.x to Safari 5.0.6 for Leopard last weekend to resolve a possible issue he had with one site. I used that universal download that works on both PPC and Intel. The install went well, and the lovely green check mark came up. Had to force quit the installer before shutting down for the night for some reason. Other than that, it's been running for several days (with both starting up and shutting down each day) without a hitch until today.
He was running a nothing Pro Tools session, when suddenly, in his words, he saw a red circle with a line through it, the screen went black, and the Mac powered down. He said some choice words, started the Mac back up, and all seemed well. Booted fine, and he finished his session without further incident. He did say he had Safari open in the background, so I don't find it coincidental this is giving him grief mere days after a version upgrade.
After some research, I found several posts about a red circle with a line through it during STARTUP, but not while the system is fully booted up and running. Like I mentioned before, this is in his words, so I don't know if the system hard rebooted, had issues accessing the hard drive giving that red circle/line, and then shut down. Then, when he booted it, it went back to normal. Just guessing at this point. He has many external firewire hard drives hooked up, plus all the Pro Tools cards with I/O units attached, wireless mouse. God only knows what caused it.
I wonder if maybe he had some kind of wacked out power brown out, and the system just had a temporary coniption fit.
Anybody know of anything I can do or suggest to him to possibly begin to troubleshoot this? Intermittent problems are a pain. I might try having him go into Safe Mode and then reboot. Any other ideas??

Well, it couldn't writeto something big time, no idea what.
Open Console in Applications>Utilities, check the system log for the date/time of the last problem & next startup for clues.

HT1414 I am restoring a new iPad, using iCloud, with all my old iPads info, it is taking forever, all day and I'm still only an 8th of the way there. Is there any way to speed up all the game down loads or is there a way to re-organize my game icons manu

I am restoring a new iPad, iCloud, with my old iPads info, it has been downloading all day and it's only 2pages in on my game apps out of about 10 pages. Is there a way to speed this process, or is there a way to move my icons so that the games I want are at the beginning of the line as opposed to at the end because their name is alphabetically last

There is no way that I know of to speed up the download. Restoring from an iCloud backup will take as long as it takes in order to download all of your iPads contents. You commited to iCloud and now you have to wait until everything finishes downloading.
This relies on your WiFi connection speed, so unless you can speed that up, you just have to wait.

My ipad reacts slow on touchscreen. I have to really puss an icon to select it, and then tap it several times. Scrolling is impossible. And there is a voice with names all the actions I do / the buttons I touch. I have done a hard reset and itunesrecovery

My ipad 2 does not react well to the touchscreen. I have to push the icons really firm (kind of selecting it) and then tapp them several times before something happens. And a voice tells me what buttons I touch. I have don the hard reset and a recovery through itunes. But the problems stays. Has anyone had the same set of problems? DirkiedH

You have VoiceOver turned on. To turn off:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)
Triple click the Home button should allow you to go to Settings>General>Accessibility and turn it off. Scroll with three fingers if necessary.

If I hilite a line then scroll down a ways, is there a way to jump back to the hilited text?

Similar Messages

Maybe you are looking for