If I install a new NVidia PC card on my Mac Pro will I be able to choose between Boot Camp and OS X during startup?

I couldn't find an answer to this anywhere.
Will the lack of EFI prevent me from choosing which OS to boot into (due to no bootup screen)?
Does Apple have a workaround for this?
Also, is my Mac Pro (Quad; 4,1; 2009) compatible with the whole line of Geforce GTX, provided I have the "magic" drivers?
(I need to use OS X for music and 2D graphics (Pro Tools, Adobe), and the Windows side for game development with Oculus DK2)

Thank you! Great advice.
I think I'm giving up on this, though. Only few card models are supported on the Mac Pro (with or without EFI firmware flash), and it's too much of a risk it won't even work at all if I don't buy the exact overpriced/outdated chipset supported. Apple hardware support is terrible, and information on workarounds to that lack of support are nonexistent. I wish I could make this work, but it's cheaper and easier to just get a cheap AMD with great graphics for all 3D/rendering projects.

Similar Messages

I just installed a new Samsung 840 to my 2010 mac pro as a second hard drive. It is not showing up in my startup drive in system preferences

I have a 2010 Mac Pro with a 1TB HHD. I just installed and formatted a Samsung 840 Pro SSD. I want to install a clean copy of Mavericks to the SSD and have the computer boot up to it. How do I install Mavericks to the SSD? Also, the Samsung SSD does not show up as an option in Start up in system preferences. Please help!

What OS do you want to install? If you bought your MP early enough, it may have shipped with actual install discs, and you could use those. If it shipped with Lion or newer, you will have to follow one of the procedures mentioned by Niel.
You can get Mavericks from the App Store. Before you run the installer, copy (copy, not move) the whole "Install Mavericks" download to a backup location so that you can install it again if necessary. The installer in the Applications Folder will be deleted after installation is complete, so a copy is needed.

Is it possible to put the new nVidia GTX 480 in the Mac Pro

I'm planning on creating the ultimate gaming machine, but also want the best operating system. So I have decided that my next computer will be the Mac Pro and will have the new nVidia GTX 480 (if it works). The Windows partition would be used for heavy gaming with DX 11 and PhysX technology. While on the OSX partition I could use the greatest operating system, to do general things like Movie Making, Picture Editing, Web Surfing, Emailing etc.
So all in all, is it possible to install a GTX 480 on OSX? I know it'll work with the windows partition, but not sure about OSX. I'm also unsure about the hardware side of things, but that's why I'm asking!
Any help would be greatly appreciated.
Thanks again,
Mike

If you don't need dual processor, PC with 980X Gulftown makes sense.
Forget over clocking a Mac, but if you need dual processor, the Mac Pro makes sense but expect to pay. Otherwise, take a look at
EVGA Classified SR-2 (Super Record 2) 270-WS-W555-A1
http://www.evga.com/products/prodlist.asp?switch=5
Apple has not had good Nvidia drivers. And right now there are two 6-pin, and you need 6 + 8 and stick with Windows 7 and ability to do SLI. I laugh when people talk about "windoz" (rude) being somehow less or 'inferior' having seen the best - and worst - of both (never got caught up in 95/98/NT/XP so spoiled by only knowing Vista/7). I still think 10.6 hasn't quite caught up to 7 in areas that really matter, like threading, multicore, efficient use of memory.
Forget using more than one, Apple likes graphic cards that are low power, low end, and only supporting one high end card.
The GTX 480 @ $499, and if Apple offered it, it would be $549 or more (Apple 'tax' for smaller market and having to do their own drivers). And it would be much later before optimized drivers (maybe next year this time at best).
While you can go water and add custom fans and cooling, the Mac is much more of a "closed" box in many ways beyond RAM and hard drives and +very limited+ selection of graphics.
That really is my honest assessment.
The place where Mac Pro is easier, you can install 32-64GB RAM without trouble and not have to worry about compatibility or PSU issues. I'm always surprised by all the memory testing and supported and problems PC owners go through (I don't think Cruical Ballistix gets enough credit).
DX11 will still take time. Adobe showed how GPGPU/CUDA could benefit, but Apple and Adobe apps have always tended to favor ATI which is just beginning to get into OpenCL technology ... and the 5000 series may find Nvidia Fermi, while it took longer, runs hot and power requirement, could be better poised down the road too.
A single socket Mac Pro 3.3GHz or even stock (same as 920) will do the job you want.
Apple Mac Pro Specials (refurb dept)
http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro
Are a good selection and place to shop. My the time Gulftown + GTX480 and all the rest is out and ready could be more than a few months.

Just bought new Mac Pro, will I be able to install my PPC apps?

Hello,
Just ordered a new Mac Pro Dual 2.0 online today. After reading a lot of posts on here, I'm wondering if I made the right decision and should have bought a Dual G5 Quad instead. Will my PPC apps install at all on the new Mac and will they run? I do a lot of audio work and I'm already noticing that there is a pretty long wait with the UB updates. Not really looking forward toward the hassle of updating everything all over again...Do you think the MP was a better investment than a refurbished G5 Quad? I assume I'll be able to install Logic Pro from my 7.0 DVD's and then upgrade to 7.2 or does it not work this way? I'm hoping that the upgrade to Logic 7.2 is not a paid upgrade. Since I just bought online yesterday, do you think they'd let me cancel before shipping?
Shane

PPC applications will run on Intel Macs through the Rosetta emulator. You will see a speed hit, however. Rosetta runs about 30 percent slower than native apps due to the emulation hit. The exception will be Java applications. Java applications that use the JNI libraries need to be converted to universal binaries in order to run on an Intel Mac. The other exception will be applications that require plug-ins and/or startupitems or install special frameworks. These will need to be universal binaries or they simply won't work on an Intel Mac.
If possible you will want to upgrade your PPC apps to their universal binary versions if such versions are available.
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Written by Kappy with additional contributions from a brody.

New airport extreme card in 2007 mac pro?

I have a 2.66 mac pro which i purchased in september 2007. I talked to one lady at the mac store in Roseville, MN and she said I needed the old airport card, which she told me is model # MA688Z/A. is this true? or can i use the newer airport extreme card? the old card is hard to find and if i can use the newer card, model # M8881LL/A, that would make my life so much easier. Please advise.

I've talked to a few more people from different mac stores, and they said that the first person i talked to basically didn't know what they were talking about. they said that the new mac pro and old mac pro both take the same airport card, model MB363Z/A. sorry for all the run-around. can anybody confirm or dis-confirm this info?

4x NVIDIA GeForce 7300 GT cards in a Mac Pro run below max supported speed

Hi,
We have 4 "identical" NVIDIA GeForce 7300 GT 256MB cards in one Mac Pro (to support 8 DVI monitors for a Network Operations Center). One card came with the system, the other cards were purchased from Apple at the same time. This was a refurbished computer, so we didn't have the build-to-order option. I put identical in quotes because they seem to have different ROM revisions.
The system mainly shows graphs on webpages and HP OpenView (via X11), so no heavy-duty gaming or refreshes.
We have been running with 6 monitors for the past 4 months with the following monitors:
- 1x 42" LCD with 1280x768, 32 bit color, DVI
- 5x 22" LCD with 1680x1050, 60Hz, 32 bit color, DVI
When I restart the system, at least one of the 22" monitors takes 5 or 10 minutes of flashing on then off (mostly off) before it finally syncs up and shows a constant image. The 42" LCD won't go to its native resolution (can't recall what that is right now), so have to go down to a less optional 1280x768. In the next day or so, I'll be connecting one more identical 22" LCD and then soon after another 42" monitor, but am wondering if they will work. Yesterday, I saw a post about firmware update for this video card (http://www.apple.com/support/downloads/geforce7300gtfirmwareupdate.html). I also noticed that two of the cards have ROM Revision 3008 and two have 3011 ROM Revision of the cards (in System Profiler). I'm not sure yet if this firmware update increases the ROM Revision.
Running the Expansion Slot Utility (/System/Library/CoreServices/) shows that my PCI Express profile is set to Two x8 Lane + Two x4 Lane slots. All slots say that they are running below maximum speed.
The store.apple.com site still shows this configuration as a valid build-to-order, but I wonder if they do something different or extra.
Does anyone else have experience with 4 of these video cards with this many monitors?
Any experience with the Firmware Upgrade that I should know about?
Thank for any insight!

l_elephant wrote:
I notice that the flasher is connected to a card with ROM revision 3011, the later one.
I noticed this too.
now, to the slot profiles.
you say;
"The first one that I enter is the one to the right (looking from the back of the system)."
so you mean that the mac is laying on its side and your in the back, and what you call 'slot 1' is to the right? is that correct?
No, the system is upright, but the cards are horizontally seated. Pardon my ascii art, but here's the layout if I look from the back of the Mac Pro:
| DVI DVI ---->> slot 4
| DVI DVI ---->> slot 3
| DVI DVI ---->> slot 2
| DVI DVI ---->> slot 1
So, there are two DVI ports on each card (which is in a slot). I'm not sure which lane is which.
Either the left (as pictured) is lane 1, or the right (as pictured) is lane 2.
i ask because i'm wondering if your reproducing the way the expansion slot utility is graphically portraying it. I'm pretty sure the utility is showing the slots as if the mac is upright and the person is looking into the side of it with the access panel off.
Okay, sounds logical!
if you say that you have two x4 lanes and two x8 lanes, then i'm deducing that your flasher is on an x4 lane, and as it is, one of your x8 lanes has only one lonely monitor on it.
Probably correct.
In my utility window, it is the fourth configuration, so you would have at the moment;
slot4__x4__22" and 22"
slot3__x4__42" and 22" flasher
slot2__x8__22" and empty
slot1__x8__22" and 22"
I think that you have 2 and 3 reversed.
i would suggest trying the third configuration thusly;
slot4__x8__22" and 22"
slot3__x1__22" and empty
slot2__x8__42" and 22" flasher
slot1__x8__22" and 22"
in other words, check off the third configuration in the utility, then
exchange the connections on the second and third cards, leaving the first and fourth cards be.
Okay, will do.
as far as running below max speed, i figure as long as your workload doesn't suffer, then its fine.
Oh, and another question, does it always, always flash when you boot-up?
Do you guys shut down the system every night?
We rarely reboot it, and I'm not the only one that would see it reboot. This system is in a 24x7 Network Operations Center. I just know that rebooting takes a while for the monitor to come up all of the way.
Thanks for all of your help and guidance so far!
David

I just migrate settings and software from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install.

I just migrate settings and software, include CC, from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install. I have try because every time I restar keep bothering asking for installation, (by the way, the link is not up to date). Will appreciate your help.

never migrate adobe software. it should be properly installed.
uninstall all the cc programs you can, clean and then reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

HT5628 When will Windows 8.1 be supported on Boot camp 5? I have a new Mac book Pro 2013 and cannot install. Apple please advise.

When will Windows 8.1 be supported on Boot camp 5? I have a new Mac book Pro 2013 and cannot install. Do I return the Windows version and try to download 8.0, or wait it out until it is supported? New to Mac's.
Apple please advise.

Apple does not respond in these forums except occasionally an Apple employee will stop by. If you want to contact Apple, use the contact us link at the bottom of this page.
With respect to your question "When will Windows 8.1 be supported on Boot camp 5?" you are asking us to speculate as to when Apple will release their drivers supporting Windows 8.1. We do not know, and we can not speculate as to when. From the terms of use of this forum:
"Unless otherwise noted, do not add Submissions about nontechnical topics, including:
Speculations or rumors about unannounced products."
The planned dates of production or release of Windows 8.1 drivers are speculation about the drivers.
With respect to your other question, "Do I return the Windows version and try to download 8.0, or wait it out until it is supported? New to Mac's.". I answered you.

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

Need info about nvidia graphics card supported with premiere pro cs5

Hi
I need information about nvidia graphics card supported with premiere pro cs5
If I have a computer(portable) with this video card or graphics card :
nVIDIA® GeForce™ GTX 285M with 1GB DDR3 Video Memory available in Single or Dual (SLi) Configurations
Microsoft® DirectX® 10 Compatible
is it going to support MPE in premiere pro cs5?
Regards,
Vinay

To be clear:
You asked about supported cards. Here is a list of supported cards. Others on this thread are telling you how to make an unsupported card function to some degree using a method that is not advocated by Adobe.

Hi. I was trying to open some pdf files and got a message my adobe reader was deinstalled. I installed a new version of Adobe Reader for Mac and when trying to open a PDF file I am getting a message in a foreign language. Any suggestions?

Hi. I was trying to open some pdf files and got a message my adobe reader was deinstalled. I installed a new version of Adobe Reader for Mac and when trying to open a PDF file I am getting a message in a foreign language. Any suggestions?

Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

I'm new to boot camp and have always used Parallels which was easier to install but now I can't get my hands on Windows 8 for boot camp? What do i do?

I'm new to boot camp and have always used Parallels which was easier to install but now I can't get my hands on Windows 8 for boot camp? What do i do?

There is no Windows for Boot Camp. just buy a copy of Windows.

I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?

As the title says.
I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
I don't want to restart it because im scared that something might go wrong.
operating lion

LimitLess- wrote:
Hi,
I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
Thanks
I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread.

Installed the new Lightroom 5 CC on a Mac running the OX X Yosemite version 10.10.3 (14D136) Lightroom starts to load but within a 1/2 sec it closes. Is there a fix?

Installed the new Lightroom 5 CC on a Mac running the OX X Yosemite version 10.10.3 (14D136) Lightroom starts to load but within a 1/2 sec it closes. Is there a fix?

I had the same problem earlier today. Sign out of your account for CC in the Preferences panel, close the CC toolbar app. Then sign back in, and the download process might begin in earnest for you. Took me SIX HOURS to download this pig, and now it crashes continually. This software is not ready for release based on today's experience. Hopefully you will at least be able to get to the level of frustration I have arrived at, beyond the level of frustration you are currently stuck at trying to get it to work.I am on the same OS. Too bad Apple abandoned a pro level competitor to LR. Hopefully in the near future they will update Photos so that it competes well with LR.

How do I install a airport extreme card in a mac pro (Intel 2008)

How do I install a airport extreme card in my mac pro (intel) 2008 computer

What Wifi Cards Do Mac Pro 2008 model use???
http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

If I install a new NVidia PC card on my Mac Pro will I be able to choose between Boot Camp and OS X during startup?

Similar Messages

Maybe you are looking for