If I make an image a brush how can I save it?

I've made many brushes from images and they are listed then they dissappear and are not there when I open pse 12

Error7103 wrote:
You can also put a Button Matrix in the text frame overlay.
Evidently, either form of hypertext overlay gets converted to an Image Map if exported to HTML or XML. The frame may need to be on top of the graphic for this work.
I've never needed more than a simple single-link text frame.
I've also never tried using multiple links in table cells in the overlay, which, if it works, would provide a bit more control over hot spot geometry than a button matrix, and would be a lot less work than multiple text frames.
IIRC, button matrices didn't work in HTML some time ago, but this may no longer be correct.
Regards,
Peter
Peter Gold
KnowHow ProServices

Similar Messages

I recently switched to Aperture. When I opened an image I imported from iPhoto, I don't have an option to edit it. Top of "Adjustments" tab says "image offline". How can I adjust Aperture so I can make adjustment to my iPhoto images?

I recently switched to Aperture. When I opened an image I imported from iPhoto, I don't have an option to edit it. Top of "Adjustments" tab says "image offline". How can I adjust Aperture so I can make adjustment to my iPhoto images?

I never tried importing from the iPhoto library as referenced images. I wonder if Aperture can access images stored in an iPhoto library package? Even if it would work, it sounds like a bad thing to do.
You might consider starting over and this time have Aperture manage the images. That will copy them to the Aperture library, leaving the iPhoto library untouched. This assumes you have sufficient space to make a complete copy of all the images in your iPhoto library plus another copy of each image that Aperture makes as the preview image. You can then back up your iPhoto library (two backup copies, just to be sure) then remove it from your hard drive when you start getting too low on space. As I write this I don't know where your iPhoto or Aperture libraries are/will be located so I'm assuming you have them on your HD.

How can I save the images to the iPhone anywhere

Hello I own Time capsule 3 tb. How can I save the images to the iPhone anywhere in Time capsule
note i used fileexplorer when Outside the home isee Outside Message " error connection failed with the error operation time out "
Thanks

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
If you want to back up the Photos only:
Export them using the File -> Export command.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

Ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut of wacom pen click, i now have to click on the image title bar, how can i fix this please?

ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut or wacom pen click, i now have to click on the image title bar, how can i fix this ?

@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson

How can I save an image I have created in Pages as a jpeg?

How can I save an image I have created in Pages as a jpeg? The image has both a photo and various text boxes. I would like to use it in one of the Photocard websites but they only accept jpeg. Any easy solutions please.

Hold command shift 4 and draw a box around what you want and then click again, on your desktop a .png file will appear.
To convert it to jpeg, open it in Preview and Save as.
if you want all your screenshots to be jpg, download the free Tinkertool and make the change.
http://www.bresink.com/osx/TinkerTool.html

How can I save my images like a "wedding photographer" does?

I have a Pixma PRO-100. . . with a Windows 8.1 PC. . . and printing through Adobe Photoshop Elements 11.
I just printed some wedding pictures of my daughter - which I got from the "wedding photographer"... when I printed them - they were an exact match to what I saw on my screen (which I've calibrated)... and dead on crisp, great quality.
I'm wondering what a wedding photographer does to their images to make them so "solid" in printing. How do they save them?
when I print something from a my files, (Raw, NEF, or JPEG's) - there always seems to be a color or quality problem? Never a match. It takes several adjustments and print samples before I get what I want.
Is the ICC Profile a problem - or How can I save my images like a wedding photog does? So they print exact?
Joe B

" ... (Raw, NEF, or JPEG's) ... "
I suspect there are some minor differences you are not seeing and/or noticing on screen. But right off, no real wedding photographer will shoot in anything except RAW. You should be using RAW, only, too. The RAW file to start with has way more info in it than any jpeg does.
Next I would bet your wedding photographer does some tweaking to highlights and shadows, plus s ome other stuff that you are not. In other words he is getting the photos ready for printing. Remember printing on paper and "printing for on screen" is two different things.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

How can i save an extracted image to be able to edit it

How can I save an extracted image in pse9 to be able to edit it - i.e. move it around on the layer to another spot and also to be able to resize it to make it bigger or smaller before repasting it back into another image/background?
Thanks

A really simple method is to use the quick selection tool to outline a person or object in a photo. Holding down the alt key changes the tool action from plus to minus - so you can perfect your selection as you go along (e.g. if you accidentally select part of the background)
When you are happy with your selection of the person or object press Ctrl+J - this will automatically create a new transparent layer with your selection as shown by the checkerboard background.
You can then add any other picture or background - here I’ve used a simple green background to illustrate the point by selecting Layer > New Fill Layer > Solid Color
I then clicked on the transparent layer in the layer pallet and dragged it to the top - to reveal the green background behind my person selection.
I then selected the hand tool and the bounding box appeared - by holding down the shift key you can drag the corner handles or sides of the bounding box to resize and then click the green checkmark to confirm OK. You can then drag the image to any position in the frame of your chosen background. Save as PSD to keep your layers for later or click Layer > Flatten Image to save as Jpeg.
Click to view

How can I save the 12-bits gray scale image ?

Software & Hardware
NI-IMAQ Vision 6.0
NI-IMAQ for 1394 2.0.0
Hamamatsu C4742-95
I acqured the 12-bits gray scale image (Format7 , 640X512 size , 12bits) successfully.
And CWIMAQViewer display the correct image of which the range is from 0(black) to 4096(white).
But, I don't find the way to save this image with 12-bits format T.T
Always, CWIMAQVision object save this image to 8-bit format.
I tested all formats - tiff, bmp, aip, png.
I think there are two possible problems.
1. I dont't know the way to save the 12bits gray scale image. :{
2. I dont't know the way to read the 12bits gray scale image that saved correctly.
How can I save and load the 12-bits gray scale image ?
What is the solution for this problem T.T ?

Hello,
I would recommend taking a look at the "ReadImage" Visual Basic project for more information on setting the image type and saving the image to file. When you run the program, make sure you select 16 bit for your image. You can also add another button to this example for saving the image. Within the click subroutine for the button, you can add the line:
CWIMAQVision1.WritePNGFile CWIMAQViewer1.Image, "C://image.png"
This method will save the image in the viewer as a png file. As long as it was loaded as a 16 bit image, it should save all of the 12 bit information into the file. You could then test the new image by loading it using the example (you can see the pixel values by right-clicking on the viewer and selecting Settings>>Show Image Info. The pixel value displayed in the info bar corresponds to the mouse position.
Best Regards,
Jesse D.
Applications Engineering
National Instruments

How can I save the images and movies on a external Disk from iphoto program, to protect the images when problems occur in the laptop,

How can I save the images and movies on a external Disk from iphoto program, to protect the images when problems occur in the laptop,

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
If you want to back up the Photos only:
Export them using the File -> Export command.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

HT204266 my iphone wont let me make an in app purchases how can i fix this?

My iphone 3Gs wont let me make an in app purchases
How can i fix this?
The restrictions are off
It keeps saying purchase could not be completed cannot connect to itunes store
but i can still buy music and other apps in the store on my iphone
just wont let me do it in apps
Any help be much appreciated
Thanks

Read http://support.apple.com/kb/ts1702

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

How can I save a region of an image into another image?

How can I save a region of an image into another image? Should I use JAI?
Java2d? Is there an example?
Thank you.

Here is what I try, but I find out I just get a black square for my output image, can you please tell me what am I missing?
          ImageIcon file=new ImageIcon("images/clouds.jpg"); // You can't open bmp files
               // width, height looks correct:
               System.out.println (" width" + file.getIconWidth());
               System.out.println (" height" + file.getIconHeight());
               BufferedImage bi = new BufferedImage(file.getIconWidth(), file.getIconHeight(),
               BufferedImage.TYPE_INT_RGB);
               int x = 0;
               int y = 0;
               BufferedImage subimage = bi.getSubimage(x, y, 40, 40);
               File outputFile = new File("newimage.png");
               ImageIO.write(subimage, "png", outputFile);

Once image is edited- how do I save it to desktop or a file to later insert it in an illustrator layout? I tried to save it and it saved but it opens into photoshop elements editing page

once image is edited- how do I save it to desktop or a file to later insert it in an illustrator layout? I tried to save it and it saved but it opens into photoshop elements editing page

Right click > Open with and choose the program to open it.

Hi i insttalled the free trial 3O days MacScan on OsX10.5 is it normal that for full scaning it takes so long time more even than one day?! on the other hand this application hasn't any uninstaller on image disc ,so how can i uninstal it from my hard?

Hi i insttalled the free trial 3O days MacScan on OsX10.5 is it normal that for full scaning it takes so long time more even than one day?! on the other hand this application hasn't any uninstaller on image disc ,so how can i uninstal it from my hard?Thanks

Get rid of the tracking cookies. They are used to profile and track your browsing history. While they are privacy invading, by calling them spyware, MacScan is being a little dramatic in trying to sell you its crap. And in the future, for whatever browser you use, don't allow third-party cookies.
To prevent tracking, get Ghostery. In addition to having Ghostery and forbidding third-party cookies, I clear out all cookies from one browsing session to another. If you always do that, you won't have any tracking cookies to worry about, so you won't need MacScan to find them for you. Btw, MacScan finds the tracking cookies in the first few minutes of scanning; if you want to use it for that, then that's all the time you need to run it for. But, as I said, you won't have any tracking cookies around if you just remove all cookies and don't allow third-party cookies. As soon as you visit a site that needs them, you'll just get new ones. No problem.
Read all about cookies here.
http://en.wikipedia.org/wiki/HTTP_cookie

Just got iPhone 4 but doesn't have a mic for speech to text. downloaded dragon dictation but too many steps to make it work for texting. how can I get easy speech to text

just got iphone4 but it has no mic for speech to text. downloaded dragon dictation but too many steps to make it work with texting. how can I do simple speech texting?

To get speech to text you need an iPhone that supports Siri. The iPhone 4S and the iPhone 5 both support Siri

If I make an image a brush how can I save it?

Similar Messages

Maybe you are looking for