If i plug my ipod 4th generation into my computer with my usb cord why wont my itunes reconize it?

i have tried pluging my ipod into my windows computer with many different usb cords and it wont recognize on itunes but it shows it has connected to my windows computer. why am i haveing this very irritating problem? someone please help

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

Similar Messages

  • I have plugged my ipod 4th gen into my computer to reset it, and after agreeing to the trems a window pops up saying " it cannot restore your ipod. check your network settings or try again later. i dont know what to do! please help

    hello. my ive been trying to restore my ipod touch 4th gen because it was frozen on the apple logo. i got it to go to the connect to itunes image. i plugged it into my computer to try and restore. i open itunes and it says "you must restore this ipod to use itunes". i click ok and then i accept the terms. after that it shows that it will take 41 mins to restore, but then it says "we connot restore this, there was a problem. it also says to check your network connections or try again" my network connetions are on and its still not working! please help

    Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

  • HT1267 I plugged my iPhone 4 into my computer with the USB charger cable, and the screen went blank and came up with a picture of the usb cable with an arrow pointing to iTunes....Can anyone help get this fixed????

    I plugged my iPhone 4 into my computer with the USB charger cable, and the screen went blank and came up with a picture of the usb cable with an arrow pointing to iTunes....Can anyone help get this fixed????

    Connect your iPhone to iTunes and restore or follow the prompts.

  • I plugged my iPod touch (4th generation) into my computer and when iTunes popped up, there was a notice that read "The iPod cannot be used because the Apple Mobile Device service is not started". What does this mean and what do I do?

    I plugged my 4th generation iPod touch into my computer and when iTunes popped up, there was a notice that read, "The iPod cannot be used because the Apple Mobile Device is not started". What does this mean and what do I do?

    Type "Apple Mobile Device Service" into the search bar at the top of the page by Support and read the help article.

  • How do i update my ipod 4th generation into ios 6?

    How can I update my ipod touch 4th generation 4.2.1 into ios 6. I have installed the latest version of iTunes on my computer, then I connected my ipod to it. However, I tunes is saying that ios8 is the latest update, and I want to update to ios 6. How do I solve this problem?

    If your iPod is currently running iOS 4.2.1, that suggests that it is in fact a 2nd generation Touch, not 4th. If I recall correctly, the 4th gen Touch came with iOS 5 on it.
    To check whether your iPod is 2nd gen, look on the back at the etched text (you may need a magnifying glass). If it states Model No. A1288, then it's a second generation Touch, which cannot be updated beyond iOS 4.2.1
    Alternatively, if you connect your Touch to your iTunes Library (on your computer) and use the Check for Updates feature on the Device/Summary pane. If it comes back and states "your iPod is up to date", then there are no updates for it.

  • PC automatically shutsdown when I plug my iPod nano 4g into the computer

    I've only been able to sync my iPod once, but every other time I plugged it into my computer, a blue screen automatically pops up saying that it's going to shutdown unexpectingly, any ideas? I'd like to update my iPod again some time soon
    Message was edited by: arkboy12
    Message was edited by: arkboy12

    I've never heard of it.  Here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • When i plug my ipod touch 4g into my computer is says that "this ipod cannot be used because the apple mobile device service is not started"  what do i do?

    when i plug my ipod 4g into my computer is says that "this ipod cannot be used because the apple mobile device service is not started" what do i do?

    http://support.apple.com/kb/TS1567
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • When we plug our ipods or ipad into the computer it dosent show up in itunes and wont sync, when we plug our ipods or ipad into the computer it dosent show up in itunes and wont sync

    our devices dont show up in itunes anymore,and the only thing it will do is import the pictures and videos since we updated  to the new itunes

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • I plugged in my new iPad into my computer but it will not show up on iTunes and i have iTunes up and running. What do i do?

    I am trying to sync my new iPad into iTunes. The screen is telling me to plug into iTunes and i have iTunes up and running but nothing is happening. Help?

    Type "ipad not recognized in itunes" or similar into the search bar at the top of this page by "Support".

  • Why whount my ipod thouch conect to the computer with the ubs cord?

    i tried to plug in my ipod touch and it wount conect to itunes or the conputer.

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • I thought that I was updating my phone...but it went into Recovery mode with the USB cord pointing to itunes and music notes in a circle. How can I get my Iphone 4 back to working without losing my data? I tried turning the phone off and it is uplugged.

    My iphone 4 is stuck on the lock screen with the USB cord pointing to itunes and music notes. I thought I was updating the phone for itunes but it is now teetering on the Recovery Mode. I do not want to lose my data, etc. Can someone explain how I can get my phone back? Apple support is not helpful.

    Your phone is in recovery mode.  All data on it are already lost.  You must connect your phone to your computer and restore through iTunes.

  • HT4356 When I try to set up my itouch I get an error message itunes store unknown error 310. I don't have wieless so I hooked the ipod touch up to the computer with the USB port when instructed. But then get the error message and can not get any further.

    Error message 310 is happening on my mac book and I am unable to set up my new itouch.

    If you are running Tiger, you don't have time machine. 
    You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups.  The free versions do a lot and you can upgrade to the full-service versions for small change if you need more.  The one time I used SuperDuper! for cloning a volume it worked just fine. 
    (My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

  • I can't update my iPod 4th generation to ios 6

    I can't update my iPod 4th generation to ios 6... I've updated my iTunes to 10.7 checked my security software tried restoring my iPod and then downloading on my device and my laptop. When I connect it to the computer I try downloading & updating and only downloading.. Still nothing I get error messages, can't connect to update server messages.. I'm just thinking about giving up... What the heck do i do !!??? Will the local apple store do it for me and what's so going to be on the 5th gen I may just wait and get that one. Please help.

    Are you sure you have a proper Internet connection? Make sure your iPod is connected to your computer, and you have an Internet connection.
    Don't even get me started on the iPod Touch 5G, I actually own an iPod Touch 4G, and I've considered a lot about if I should get the new one. At first look, you might be sold by the features Apple has on their iPod Touch page. It has a taller screen that's a 4-inch Retina Display, has a much better camera with a flash, and comes with iOS 6 preinstalled with Siri. But the real breakthrough comes with the new connector. It's called Lighting, and it's much smaller. But if you have a dock connector that comes with some cars, and maybe a set of speakers or docking stations as alarm clocks, I encourage you not to get the new one. The usage of your old connectors requires a $30 adapter, which is a ridiculous price. And who knows how secure the adapters will be with your docking stations? I personally think Apple has crossed the line. If they are to put a new connector with their new products, they should ship with an adapter in the box, at least at first. This is why I strongly encourage you NOT to get the new 5th generation iPod Touch.
    Sorry if I went a little off-topic there, but I wanted to get my point across. For your updating to iOS 6, I reccommend you check out other discussions in the support comunity, and see what other contributors have to say. Or go on Google and search your error messages, possibly someone might've already went through the same problem as you did. I really hope this helped!

  • ITunes stop working when connecting ipod 4th generation on Vista

    When connecting ipod 4th generation to a computer running Vista Ultimate, ITunes (version 8) closes. Windows provide the following message - iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    Thanks!

    i have the same issue... but i found a workaround.. i tried 3 diff OS's . didnt change the problem. To Add apps or music to ur Ipod... simply DISCONNECT the Ipod from the PC then add files/folders to library. Then connect the ipod back to PC and sync. it has no problem adding the files that way (at least in my case) I hope this helps... Good Luck =)

  • IPod 4th Generation 8GB, Help updating to iOS5??

    I have an iPod 4th Generation, 8Gb, I have succesfully downloaded Ios5 but it wont go past the backing up iPod to iTunes stage, it says stage one of 6 backing up files, it doesnt appear to have crashed, what could be happening?

    Try here:
    iOS: Troubleshooting backup issues in iTunes

Maybe you are looking for

  • Multibyte character problem

    Hello, I can not see some of the Kazakh characters to CVI 2012. I applied for Kazakh this link: http://digital.ni.com/public.nsf/allkb/3E8A86DB1B7A4EC886257909005808EC but the characters didn't display. Characters which can not be displayed  are show

  • Batch ABAP uses GET PARAMETER of the user

    Dear all, I have the following curious effect when I start an ABAP in Batch. There are some selection criteria with a GET PARAMETER which are blocked in the variant. In dialog everything works fine. In batch mode the variant in SM37 is also correct.

  • Trick to using clickwheel

    This is embarassing. I just got my first nano and I'm having trouble using the clickwheel. Are there any tricks I should know, and does having the nano in a protective case make it easier or harder?

  • Patches still remains on the machine after un installation of lync application

    On my machine I have office 2013 professional installed on it over thst when I try to install lync and some msp which is in update folder application installs successfully but when I try to remove lync 'setup.exe /uninstall Lync' it remove only the m

  • Has anyone used the as_pdf2 package in APEX to create pdf's from sql

    I need to create a pdf in APEX. I have researched and found as_pdf2 as a possible solution. If anyone has used this solution in APEX, can you provide any more detail on implementing than what was provided with the plugin? The readme explains at a hig