If I post my complaint on every post, do you think...

Welcome to BT .
After years of poor service from Sky ,I had had enough and cancelled there service which was costing me over £100 a month.
So I thought it could not be any worse at BT vision ,How wrong could I be .
No bt sport HD, which have paid for I have spand Hours on the phone trying to resolve it ,my last try was 1hour 50minutes being put through to 4 differant people then got the engineer how could not fix it so just cut me off,then called back to be put through
to a number that just rang for 35 minutes and I gave up ,called again then got put back to the engineer and he put the phone down on me again.
I then emailed them that was 5 days ago and still no answer ,have sent 2 more emails no anwer.
Tried the online chat service said cant help.
If anyone knows of how to get some response ,please tell me.
Solved!
Go to Solution.

I think you are confused. The CLs do it in their own time. Mods are BT employees. The way to contact the Mods has changed, where a genuine problem is clearly stated and a Mod could help resolve the issue such help will be forthcoming either initiated by the Mod or by a CL.
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Similar Messages

  • What's the point of including "You might contact your administrator if you think this is a mistake" when a post is pulled?

    I understand that the mods here can't possibly reply to everyone who has a post pulled for ToU. One can vaguely try to contact an administrator indirectly, perhaps, by posting here. (When this takes the form of a "why was my post pulled" post, this usually starts a discussion of some kind, which may or may not have any value, but which almost always fails to elicit any direct participation of the Hosts, and gives the impression, at least, it's being completely ignored by them.)   
    Since there is no way of directly contacting an administrator, either for ToU or for any other reason, which this appears to suggest is possible, why not just get rid of it?

    >...although the OP's question still remains....
    I'm now referred to as the OP?
    If you got the email with content for the "final straw" post, which was mine, then you will know what I wrote. I already had one post pulled in that thread for a ToU and I did receive the obligatory email for that. I did not receive an email for the "final straw" post. Just the entire thread got pulled almost immediately at that point.
    Everything I am writing here now is deliberately being veiled and obscured to the limit possible without losing all meaning and just turning this into noise. No one who didn't receive that email content for my post will have any very clear idea what this is all about.
    My "final straw" comments related to several things: some copyright issues concerning the site under discussion; the ToU of that site as, in fact, necessarily prohibiting even the linking of content from that site, and an attempt to differentiate, in general, between what is illegal and what is a violation of the ToU, and not illegal, as such, for any service on any site. I'm not opening all of that up again here, since whatever it was I wrote will probably just get this post pulled.
    All I can say is I attempted assiduously to stay clear of the Apple ToU violation for which I was cited by the Apple email in my earlier post which was pulled -- or any ToU violation, for that matter. I was not discussing Apple's policies, nor was I giving "forbidden" instructions. That the entire thread got pulled has to make me think that straying into those waters -- perhaps, my discussion of copyright issues in regard to the behavior of the other site under consideration, especially, made someone very nervous. Or maybe it was something other than that. But I will never know.
    In any case, "You might contact your administrator if you think...." is genuinely silly, and unless it's somehow ineradicable from the Jive template -- I see now Meg has given that as a possible reason -- I can't see why it shouldn't be removed.
    Message was edited by: WZZZ

  • IMovies lost after posting to You Tube

    Some of the movies I have created and posted to You Tube have disappeared from my Project Library. Has anyone had this experience? When this happens, there is a blue folder with the name of the movie and a "Movies" and "Quick Look" folders in sub-directories with nothing in them.
    Another problem, though possibly unrelated, is iMovie freezing and all my work being lost before publishing it or doing anything else with it. How do I get my movies back?

    You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
    You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
    You will only see the Firefox program in the Mixer if you are on a website that plays sound.<br />
    You can also try to clear the Flash cookies and settings.<br />
    Flash Website Storage Settings panel:
    http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
    See also Flash Local storage settings
    http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html

  • According to posting cycle, you should post period 012 next

    Hi gurus,
    i have uploaded the master data in the dev client where taking the values and transfer date as 31.12.2007, so i have to run deprecation for the whole year periodically right and iam not able to run the deprecation and the system showing the error, According to posting cycle, you should post period 012 next so can i change any customization
    where i have found the OAYC for book deprecation Dep area as 2008 i cannot able to change that directly is there any option to chnage the year and run the dep from the 01 period for the 2008

    Period 012- you have referrd here, is it 2007 or 2008? In OAYC, which period is it showing there as last depr period posted?
    Regarding the posting of depr, do you want to post the depr in each period as Planned one?
    Also, Can you provide the long text of the error message?

  • Please only post if you're going to be nice...

    I need help in views and indexes. Can someone who has used these before please discuss with me why they used it and how?
    Many thanks.
    Yours Truly
    AU

    I need help in views and indexes. Can someone who has
    used these before please discuss with me why
    they used it and how?Indices are used to facilitate and optimize lookups. Views are used to provide customized presentations of the data contained in one or more tables.
    Forums such as this are not conducive to personalized instruction over general subjects. If you have specific questions, please ask. Otherwise, you can find all the information you need with a simple search.
    http://www.google.com/search?q=database+tutorial
    please only post if you're going to be nice...
    This isn't your forum to decide who posts what and where. Though your request is apparently sincere, you should prepare yourself for the characteristic buffoonery that accompanies threads in which you participate.

  • Sorry! Post "can't reply to any post" solved-I think

    I'm sorry! I think I know why I can't reply to a certain post! I think it is locked because there is a "lock" on it. Is that why I can't reply to it?
    Hope I didn't cause too much trouble??!!
    Thanks for  your understanding!

    Thanks Cheryl. I'm not too literate about tagging and pastng into the URL, but I'll keep trying. I still don't understand alot about posting where other can see it, though! I think I'll go to the information  page and it will probably explain everything! (I tend to "do" before I "read" things-----bad idea, huh!
    HAVE A HAPPY NEW YEAR!
    Thanks again,
    Zoe

  • I just upgraded to Lion. I was trying to set up the iCloud and it asked for my "login" keychain password. I've never been asked for that before. I've tried every password I can think of and nothing works. Is there a way to reset the keychain password?

    I just upgraded to Lion. I was trying to set up iCloud and it asked for my "login" keychain password. I've never been asked for the keychain password before. I've tried every password I can think of and nothing works. I'm normally asked for the password to my machine when upgrading software, signing on, etc. but this is different apparently. I tried the same password and it didn't work either. I read a couple of posts and they all want to take me through Applications/Utilities but that requires knowing your password in order to change it. I don't know it. Don't remember ever setting up a keychain password. Does anyone know how to change the keychain password if you don't know the keychain password???

    Most of the time your Keychain password is the same as your login password. If you configured your computer to log you in automatically, you may not have used your login password in so long you forgot it.
    There is no way to retrieve the "login" Keychain password, but you can reset the Keychain from the Preferences menu: select it in the Keychain Access menu and select "Reset My Default Keychain". This will create a new, empty Keychain but the old one will be saved should you ever remember its password.
    The result of this is that you will have to supply passwords for everything that requires it, since without your Keychain they will no longer automatically fill themselves. However, once you supply them and store them in your new Keychain, they will be remembered.

  • Hi there, I have just bought an ipad4 but it will not connect to my internet. I have tried every suggestion going to no avail. My netgear DG834g router is fairly old , do you think this is the problem? I am at a loss now and very frustrated!

    Hi there, I have just bought my first ipad4 and have spent all weekend trying to connect to the internet. I have tried all Apple suggestions to no avail
    . My Netgear DG834g router is a few years old now. Do you think this may be the problem? Do they have compatibility issues after a while? My ipad upgrade is IOs 6. I am at a loss what else to do and needless to say extremely frustrated!
    Thanks.

    First check that your router has its latest firmware.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
    Since you are a new iPad user .....
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download an iPad User Guide to the iPad from the iTunes store.
     Cheers, Tom

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

  • HT4623 My Ipad is saying that i need to type in a Sim code to unlock, but i do not know what it is...I have tried every code i could think of and also the one that it originally was when i received my Sim. How do i unlock my ipad or change my sim pin?

    My Ipad is saying that i need to type in a Sim code to unlock, but i do not know what it is...I have tried every code i could think of and also the one that it originally was when i received my Sim. How do i unlock my ipad or change my sim pin?

    Hi Mikki.J.H,
    Thanks for using Apple Support Communities.  This article has some information regarding SIM PINs that may help:
    iOS: Understanding the SIM PIN
    http://support.apple.com/kb/ht1316
    Cheers,
    - Ari

  • How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this

    How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this

    Open picture B, the one you wish to select the hair from to add to the picture.
    Use one of the selection tools, e.g. selection brush, lasso tool, to select the hair. You will see an outline ("marching ants") once the selection is complete
    Go to Edit menu>copy to copy the hair to the clipboard
    Open picture A, then go to Edit>paste
    Use the move tool to position the hair from picture B.
    In the layers palette you should see picture A as the background layer, and the hair (B) on a separate layer.

  • I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it.  I need the videos out of there.  I have tried every way I can think of.

    Like the title says...
    I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it.  I need the videos out of there.  I have tried every way I can think of.
    I have also tried from the iphoto side, to export the videos or share them to final cut.  I have had no luck.
    I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
    I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible.  I see this on forums and youtube videos of the older versions.
    However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
    Thank You for the Help

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • I have an I phone 4s and I have many contacts in my phone.  However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number.  I have checked every setting I can think of ?

    I have an I phone 4s and I have many contacts in my phone.  However, when my phone rings or I receive a message.  The phone does not show the name of the caller.  It only shows the phone number that is calling.  I am sure this is a setting problem, but I have checked every setting I can think of.  Any suggestions??

    If you are a Verizon user try this:
    Open the phone and dial *228. This is a Verizon over-the-air programming number.
    When the system answer press 1 for "Program or activate your phone"
    Wait for the call to disconnect. You should get a prompt stating "Settings updated."
    Double tap the Home button to bring up the recently used apps list at the bottom.  Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
    Wait a 3-5 minutes.
    Try your phone again and see if it's fixed.

  • My MacBook Air beeps every so often; I think it's new email alerts.  How do I turn this feature off?  Thanks!

    My MacBook Air beeps every so often; I think it's new email alerts.  How do I turn this feature off?  Thanks!

    Thanks for your reply, but I had already turned the sound off there.  I also removed email from the notifications shortcut on the top right of the screen.

  • I purchased the TV FRIENDS in HD on iTunes (the iTunes store stated with every HD purchase you get the SD version as well) and want to download on my I Pod Classic and get error message the I POD can play this video.  How do I download?

    I purchased the TV FRIENDS in HD on iTunes (the iTunes store stated with every HD purchase you get the SD version as well) and want to download on my I Pod Classic and get error message the I POD can not play this video.  How do I download?

    I see there's no answer.
    This issue has ****** me off for a long time, and I am fed the **** up with it.
    I DO NOT WANT TO DOWNLOAD the Movies and TV shows to every *^&%^$%# Apple device, ONLY the MUSIC!!!
    COme on Apple!!!  FIx this!!!

Maybe you are looking for

  • How to make Screen Splitter in c#

    Screen Splitter will allow main screen to be split into two or more sections. It will be helpful for the active program's window to be resized properly to one part of the screen. Using this utility, User will be able to do a split system desktop into

  • How do i get my iphone 5 out of recovery mode after trying to install ios 7

    Alright, so i tried to install ios 7 and i got an error saying that the ios 7 update got a problem and so then my phone went into recovery mode. i installed tiny umbrella to get it out of recovery and it worked, so then i tried to install ios 7 again

  • Bootcamp does not recognize windows 7 installer disc

    I am trying to install windows 7 on my mac using Boot Camp.   I have a bootable version of windows 7 that is NOT a branded version on a usb flash drive.  No matter what I do when I hit install, I get the following error: The installer disc could not

  • How much ATI does a macbook have?

    My child wants to get Team Fortress 2 but i heard it didn't work on his friends computer. How much ATI does a macbook have?

  • OpenDocument parameters suppliable limit

    Hi All, We are using openDocument to link reports. We need to pass aroung 700 chars long information as prompt values to the target document (sub-report), and openDocument.jsp itself may add additional values to process the document. For openDocument