If I reinstall my FCE 3.5 from the original discs, will I be able to get the updates from Apple?

System has begun crashing (dropping-windowshade, message to shut down computer) during attempted capture or render. Hardware has been checked out and is OK. Other OS functions seem to be working. I have a bootable clone from the most recent period of good function, and also my original install disc for FCE.
If I need to try reinstalling FCE, are the updates still available from Apple?
If I can't restore FCE 3.5, is there anything I can use with my OS 4.11 MBP that will be able to access my FCE 3.5 project files? My 3+TB of underwater clips, stored on external drives as QT movies?
Any guidance appreciated. This forum helped me out a lot when I first started - didn't expect the end to come so soon & hope there's a feasible workaround!
Thanks,
Sharron S.

If I reinstall my FCE 3.5 from the original discs, will I be able to get the updates from Apple?
Yes, via Software Update
Here is an article on how to Uninstall FCE HD You could also use FCS Remover (note there are different versions depending on what version of OS X you have - be sure to select the correct version)
If I can't restore FCE 3.5, is there anything I can use with my OS 4.11 MBP that will be able to access my FCE 3.5 project files?
- FCE project files - only usable with FCE or FCP. Not iMovie or FCP-X
- All your clips, however, can be used with almost anything including iMovie, FCP, FCP-X, QuickTime, etc.

Similar Messages

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

If I purchase an Iphone 5s factory unlocked in the US from the Apple store and bring it to India, will I be able to purchase a global warranty? If not then will i be able to get the phone serviced here in India from the authorised dealer/agent in India?

If I purchase an Iphone 5s factory unlocked in the US from the Apple store and bring it to India, will I be able to purchase a global warranty? If not then will i be able to get the phone serviced here in India from the authorised dealer/agent in India?

ankit_shah51 wrote:
If I purchase an Iphone 5s factory unlocked in the US from the Apple store and bring it to India, will I be able to purchase a global warranty?
No, as there is no such thing for an iPhone.
If not then will i be able to get the phone serviced here in India from the authorised dealer/agent in India?
Nope. You'll only be able to get the phone serviced in the US...no one will touch it in India.

If I buy an iPhone 4 from Verizon will I be able to get the iOS 5 update in the fall?

Hi,
I am going to to be purchasing an iPhone 4 from Verizon this week and have a question. I am wondering if I will be able to get the iOS 5 update in the fall? I see that it is compatible with iPhone 3gs and iPhone 4 but want to make sure. Any help would be appreciated. Thank you.

Even if I knew that I would not have mentiones it since it violates the NDA :-). Guess that doesn't bother you. Stil no guarantee they will be released simultaneously. (Guess Verizon folks will never see 4.3.x).

Windows 2012 r2 not able to get windows updates from WSUS 2012 r2

One of our windows 2012 R2 server is not getting windows updates from WSUS 2012 R2 but other 2012 R2 are getting updates.
I found on windowsupdate log on the server saying "WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037"
Not sure what is the issue.

I believe the warning isn't really relevant in this case. Could you post a recent section from the windowsupdate.log from that machine?
0x80240037 WU_E_NOT_SUPPORTED The functionality for the operation is not supported.

I am running iPhoto 6.0.6. If I purchase the upgrade to iPhoto 9.0 for $14.95 from the app store, will I be able to make the upgrade jump directly from 6.0.6 to 9.0?

I am running iPhoto 6.0.6. If I purchase the upgrade to iPhoto 9.0 for $14.95 from the app store, will I be able to upgrade directly from 6.0.6 to 9.0 without purchasing any other versions in between?

It seems the App Store doesn't offer iPhoto 9.0 for download. I presume purchasing iPhoto '11 (v.9.4.2) for $14.99 isn't going to work...because I know the most advanced version my system can handle is 9.2.3. I'm secretly hoping that if I go for the upgrade to 9.4.2, it'll take me as far as 9.2.3 and just leave me running that version. But, my hunch is the more likely scenario will be that the upgrade/installation will not be completed/fail.
Can you please just confirm that my hunch (as opposed to my "hope") is correct?
Thanks!

Stolen Phone: Will I be able to get my photos from iCloud to my replacement?

My phone was stolen last night. I have already ordered a replacement. When it arrives, will I be able to access my photos (specifically ones taken last night) in the photo stream/iCloud?
FYI - please respond in a "for dummies" way, because I'm hardly an "iphone veteran."

Specifically, no. Unless you had already transferred the Camera Roll those pictures are not recoverable. Furthermore, unless you have a current backup on iTunes you won't be able to recover anything more recent than the last backup. If your other photos are already in iPhoto, then they can be restored to a new device.
Recovering iCloud contacts, calendars, bookmarks from iTunes backup of iOS device
iCloud- Backup and restore overview

I have upgraded to a new computer and Windows 8. I cannot install Photoshop 6 which was an upgrade version from Windows 5.5, 5, 5. The original 5 will not install and without it, the Photoshop 6 has no original version to load from.

How do I install Photoshop 6 on Windows 8., when my original Windows 5 will not install?

If you were actually talking about CS5.5 and an upgrade to CS6, you only need the serial numbers from both products. Adobe's installer will look for CS5.5 on your system and when it doesn't find it, you will be prompted to enter that qualifying product's serial number.
Nancy O.

If my ipod screen cracked, will i be able to get a replacement from apple? ive only had it for 8 months

i just dropped it on the sidewalk this afternoon and i thought i dropped it on the case but it hit just right so it completely cracked. will i be able to send it to apple and get a new ipod free or replace the screen? i only had the ipod for 8 months.

Apple will replace your iPod with an identical refurbished one for a fee; $99 (8gb) $149 (32gb) or $199 (64gb). The warranty does not cover accidental damage.

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer s

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?

Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd.

After getting an update from 10.6.8 many of my programs were no longer able to open. How can I undo the update or solve this problem another way?

After getting an update from 10.6.8 many of my programs were no longer able to open. How can I undo the update or solve this problem another way?

Do you have a bootable clone from prior to the update? If so, roll back with that.
Are your apps that won't open PPC and do they need Rosetta? Do you need to activate Rosetta?
Have you considered reinstalling 10.6 from your install disc and then coming forward with the 10.6.8 Combo Updater, then doing software update and not including whatever it was you installed that caused this propblem?
By the way - what update was it that caused this problem?

I have replaced my faulty hard drive on my macbook air 1.1 and need to reinstall the original software where can in find this on the apple web site?

I have replaced my faulty hard drive on my macbook air 1.1 with a new ssd, I need to reinstall the original software,where can I find this on the apple site?

There is no download for the software. The factory software that you are looking for is called ilife. It is all of the software that would have came preinstalled with your mac on your original hard drive when you first bought it. You will have to get new software on your computer. This might actually be a great opurtunity to upgrade to Lions. Search the Lions software in the mac store and it will come up. Click add to cart and check out. The price for it is $20. I defientely recomend Lions, it has alot of new great features. Then wate for the install disk to come in the mail. when it come just pop it in and follow the step by step instructions. If you dont want to upgrade to lions however you can download the ilife package from apple.com for a small price. Hope this helps.

Reinstall PSE8 w/o the original disc?

After switching from my old Mac to my new Mac, I get an error from PSE8 reading "some of the applications components are missing from the Application directory, please reinstall the application." But I can't find the original Adobe disc. Now what?

download the pse8 trial and use your serial number to register: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml

Cannot get all updates from iTunes software

Hello. There is a strange problem.
Sometimes, when I open iTunes from my computer, a small number will be displayed after "Apps".
When I click the "Apps", I can also see that there are some updates available from the bottom link text.
But after I click that bottom link, I cannot get all programs which need to be update listed. When I update all listed, iTunes still says there are some apps to be updated, but when I click that bottom link, only a text "No updates are currently available. To check for updates for another Apple ID, sign in with that Apple ID."
At that time, I can get all updates from my iPhone - Apple Store. So all have to do, is update all apps from my iPhone and sync it back. But if some apps are not installed on this iPhone, I have no way to update it.
BTW, I've tried to click Store - Check for available downloads from iTunes on my computer. It's useless in this case.
Any solution? Thanks.

It think its a bug. I got the same results under MX 7.0.2.
The topic of maxrows recently came up on another thread. I
did some searching and according to TechNote 18339 there was a
change with maxrow
"<cfquery maxrows=N> bug. ColdFusion MX (until ColdFusion
MX 7.0.1 CHF2) didn't pass maxrows to the underlying driver
(statement.setMaxRows())"
Given the results you're getting, it sounds like CF is
applying the maxrow to all of the resultsets, not just the one
where maxrows was declared. I suspect cfstoredproc's usage of
statement.setMaxRows() is incorrect. Thats just a guess though.
Bottom line, I think you'll need handle it manually.
Personally, I would recommend placing the row count logic in the
stored procedure (if possible). The overall results will be more
consistent and you won't have to worry about this kind of issue
again.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_18339
http://livedocs.adobe.com/coldfusion/7/htmldocs/00000314.htm
http://www.remotesynthesis.com/blog/index.cfm/2006/3/23/Maxrows-Issue-in-CFQuery

The problem here is i am not able to get the data from the list

hi all,
i have the following code
EnrichedProductCatalogue enrichedProductCatalogue1 = new EnrichedProductCatalogue();
enrichedProductCatalogue1.setAssetCount(2);
enrichedProductCatalogue1.setBlockingProduct("Weekend Freebee");
enrichedProductCatalogue1.setBlockingReason("Compatability");
ArrayList<String> availableActionsList = new ArrayList<String>();
availableActionsList.add(EnrichedProductConstants.ADD.toString());
availableActionsList.add(EnrichedProductConstants.REMOVE.toString());
enrichedProductCatalogue1.setAvailaibleActions((ArrayList<String>)availableActionsList);
BundleProduct bundleProduct = null;
Product product = new Product();
product = new Product();
product.setProductName("International");
product.setProductClassName("International");
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);
bundleProduct = new BundleProduct();
bundleProduct.setCommercialProduct(product);
enrichedProductCatalogue1.setBundleProduct(bundleProduct);
listOfEnrichProducts.add(enrichedProductCatalogue1);
listOfEnrichProducts.add(enrichedProductCatalogue1);
here i have an list called listOfEnrichProducts.
here i am adding two objects of enrichedProductCatalogue.
which contains a object called BundleProduct.
which has a reference for Product class.
here this product class has a list which contains objects of another class called UiCategory.
the problem here is i am not able to get the data from the list which contains UiCategory objects .
the following is the UI
<af:table var="row" rowBandingInterval="0" id="t1"
value="#{pageFlowScope.sample1}"
binding="#{pageFlowScope.sampleManagedBean.dataTable}"
partialTriggers="apimethods ::apimethods">
<af:column sortable="false" headerText="ProductName" id="c2">
<af:outputText value="#{row.bundleProduct.commercialProduct.productName}" id="ot15"/>
</af:column>
<af:column sortable="false" headerText="ProductClass" id="c12">
<af:outputText value="#{row.bundleProduct.commercialProduct.productClassName}" id="ot19"/>
</af:column>

<af:column sortable="false" headerText="AssetCount" id="c22">
<af:outputText value="#{row.assetCount}" id="ot1"/>
</af:column>
<af:column sortable="false" headerText="blockingReason" id="c3">
<af:outputText value="#{row.blockingReason}" id="ot2"/>
</af:column>
<af:column sortable="false" headerText="blockingProduct" id="c4">
<af:outputText value="#{row.blockingProduct}" id="ot3"/>
</af:column>

</af:table>
Can anyone pls give some solution ...

Hi Frank,
value="#{pageFlowScope.sample1}"
here sample is
Map<String, Object> flowScope1 =
ADFContext.getCurrent().getPageFlowScope();
flowScope.put("sample1", listOfEnrichProducts);
this is not the problem . i am able to get all the values except the following .
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);

If I reinstall my FCE 3.5 from the original discs, will I be able to get the updates from Apple?

Similar Messages

Maybe you are looking for