If I reset my network settings can I sync my phone to any computer?
My phone is only allowed to be sync to one computer but I dont have access to it anymore and it wont let me sync it to my new computer, if I reset the network settings will i be able to sync my phone to my new computer no problem?
No, that has nothing to do with syncing. You need to copy the iTunes folder from the old computer to the new one. If you really don't have access then you will need to sync to the new one, which will erase everything on your iPhone, then start loading everything back on. You can download apps, iTunes music, Books, etc. at no charge.
Similar Messages
-
My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fe network. I have reset the network settings and still Safari will not open any web pages. Help!
Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding". I am not able to connect with anything on the Internet. Frustrating since I am able to connect with my laptop. Thanks for the suggestion.
-
My iphone 4s will not connect to networks. the button is greyed out and cannot turn on. I have reset the network settings and it still does not work - any ideas?
Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem. I just updated to 8.1.3 - I thought the update might fix it.
-
My iPhone wouldn't connect to my wifi at home but connects to others when i go out. i have tried resetting my whole phone and network settings but still wouldn't work. Everyone in my house has an iPhone and theirs work perfectly. I need help. it randomly started working yesterday after not connecting for 4 days and suddenly it stopped working again today
The two things to try first are renewing your network lease, forgetting the network and if that doesn't work to reset all networks. You might have tried one of these but I'll repeat the steps just to make sure.
Settings > Wi-Fi > tap the blue arrow to the right of your network name > Renew Lease
If that doesn't work then
Settings > Wi-Fi > tap the blue arrow to the right of your network name > Forget this Network
If that doesn't work
Settings > General > Networks > Reset All Networks > then reset your iPhone by
Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart.
I hope one of these will help. -
I had to restore my computer to factory settings now I can't sync mine and my husbands IPHOne to my computer
See Recover your iTunes library from your iPod or iOS device.
tt2 -
I can't sync my phone to my computer. I plugged it in and itunes didn't even open
I plugged my phone into my computer to sync my music, but when I plugged it in itunes didn't even open up. My photos uploaded, but itunes didn't regiser that my phone was plugged in. I also tried to do the wifi sync but that wouldn't work either. Please help!
You can redownload purchases from the iTunes Store, App Store and iBooks.
Apple has more information about downloading past purchases here -> Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Can you register your phone on any computer?
When you register your iphone can it be on any computer or only the one you use to sync??
Hello Elena10
The best way to do that is to create a new user on a friend’s computer and then you can delete the user once you are done.
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
Regards,
-Norm G. -
My iphone 4s cannot join a public unsecured network, but my ipad and macbook can with no problems. I have reset the network settings on the iphone twice. Both times that fixed the problem but only for a few minutes, then I get the "cannot join network" message again. Please help! What can I do?
Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.
-
The wi-fi in my iphone 4S is 'greyed out' and i am not able to switch it on. I have tried resetting the network settings but nothing happened. I can't even download the new iOS7 version as it requires WI-FI to do so. Please help.
I had same problem. I removed the back cover, and warmed wi-fi module by hairdryer of my wife). five days wi-fi works great. I do not know what will happen next.
during operation iphone must be turned off. time of heating is near five minutes. wifi module is located upper the battery, on the upper right corner of device. -
Hello, I am having some major troubles connecting my iPhone 4S to my home wifi. When I try to connect on my phone, it says I have an incorrect password. That's not possible because I can connect my MacBook to the same network with the same password. I have reset my network settings on my phone, reset my router, called apple support, triple checked I was trying it in correctly, I have no clue what's going on.
The only thing different is I just moved, but I have the same router/phone/internet provider.
I've seen some discussions of router security options being the problem, I have my router connected to : WPA-PSK [TKIP] + WPA2-PSK [AES].
The other options are: WEP , WPA-PSK[TKIP] , WPA2-PSK [AES] , WPA/WPA2 Enterprise.
My troubleshooting and understanding of all this is pretty limited, my applecare service did not help, please can anyone help me?
Thanks!If the issue happened after an update, you may want to go into an Apple Store. Be sure to let them know exactly what's wrong with the device.
-
My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I reset my network settings, and when I went to join my wifi network i typed in the correct password, but it will not let me join. Other iphones and devices can however....
Try rebooting the router
-
I can't send photos to my friend it says "Not Delivered" my MMS Messaging is on , my Cecullar data is on , i reset the network settings and still my photo did'nt sent.
It is peculiar, that Chrome, Safari, and Skype can access FB, but not the iPhoto uploader.
Do you see any error messages/ diagnostics in the Console Window, when you try to connect to Facebook?
Launch a Console window from Applications > Utilities and clear the Console Window. Then try to upload. Are there any new messages?
And also launch a Terminal and have a look, if "facebook.com" is properly resolved:
Type
ping facebook.com
into the window. Do you see any transmissions? What is the IP address used?
I see:
PING facebook.com (173.252.110.27): 56 data bytes
64 bytes from 173.252.110.27: icmp_seq=0 ttl=243 time=110.486 ms
64 bytes from 173.252.110.27: icmp_seq=1 ttl=243 time=109.365 ms
64 bytes from 173.252.110.27: icmp_seq=2 ttl=243 time=110.101 ms
64 bytes from 173.252.110.27: icmp_seq=3 ttl=242 time=109.829 ms
64 bytes from 173.252.110.27: icmp_seq=4 ttl=242 time=111.323 ms
64 bytes from 173.252.110.27: icmp_seq=5 ttl=242 time=110.346 ms
64 bytes from 173.252.110.27: icmp_seq=6 ttl=242 time=110.708 ms
64 bytes from 173.252.110.27: icmp_seq=7 ttl=242 time=112.685 ms
64 bytes from 173.252.110.27: icmp_seq=8 ttl=243 time=124.256 ms
64 bytes from 173.252.110.27: icmp_seq=9 ttl=243 time=112.106 ms
^C
--- facebook.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 109.365/112.120/124.256/4.159 ms
Try the same with "dig":
dig facebook.com
; <<>> DiG 9.8.3-P1 <<>> facebook.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25051
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;facebook.com. IN A
;; ANSWER SECTION:
facebook.com. 775 IN A 173.252.110.27
;; Query time: 11 msec
can you "ping" facebook? -
I updated my 4S phone to IOS 7.1.2 and lost my wi-fi. The wi-fi is on, but can't find ANY networks. I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 and lastly going to the Apple store for help. They tried all the exact same steps I did, took the phone apart and looked at and said it is in "pristine" condition. They have no idea why it isn't working, but they could offer to sell me another phone. This is extremely annoying! They claim it has nothing to do with the update to 7.1.2, but that is when I lost the wi-fi, so it has to be related!
My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again...
-
After having upgraded my iPhone 4S to iOS 7.0.2, I can not turn on Wi-Fi or Bluetooth. After trying various tricks I found via online forums such as software reset, enable Airplane mode, and resetting the network settings, I have now also completed reset of the phone WITHOUT success. Is there something more to it? If not learn hardly be any more iPhone for me. Really disappointed. Grateful for help!
If you have tried all of the steps in this support document http://support.apple.com/kb/TS1559 and have completed all of the user troubleshooting, restart, reset, restore from backup, restore as new, then make an appointment with the Apple store to have the hardware checked.
Maybe you are looking for
-
I'm using HP Mini 210, Windows 7 Starter. The last time I used the built-in cam was 5 days ago. I used it to record a video. No update has been made ever since, but now that I wanna use it again, it won't start. It doesn't show any image when I open
-
How to set the PATH Environment variable with multiple homes?
I have several Oracle homes, and now I cannot get reports to work anymore. These are the things I installed, in this order: - Oracle Database 10g - Oracle Developer Suite 10g - Oracle Discoverer 4 - Oracle HTMLDB Now my PATH environment variable is f
-
I have a 5D III. I would like to tether (wireless or cable-direct) to my iPad 4 Retina so I can proof pictures in near real-time. I prefer wireless so I can work in the field where this is NO internet connectivity. I have Aperture, Lightroom 5, and
-
To retrieve data and display using tcode
Respected Gurus, Can anybody guide me for the scenario: 1) to develop the ztable ,the entries/fields in ztable are some user built and some taken frm SAP standard tables(Mseg,Makt,Lfa1 or more). 2) i have to fill the table using tcode. 3) also to di
-
ALV doesn't expand/collapse subtotals
Hi everyone, I have an old ALV program in wich i made some changes. For example, added form USER_COMMAND so that when you double-click on a row, it makes a CALL TRANSACTION to the referenced document. But a problem emerged, and it didn't happended be