If i restore from a later backup, can i restore back to a more recent backup?

If i restore from about a month ago, then restore back to a more recent backup?

As long as you are able to distinguish the backups, it should work fine. Apple tend not to always allow multiple backups and sometimes will move the replaced one to the recycling bin when you don't want it to. Finding it in there and putting it back on iTunes won't be too hard.

Similar Messages

  • I set up new phone (5) as a "new phone instead of backing up from icloud. How can I get back in to use the icloud backup? If I hit "delete account" does that just clear the new phone or does it get rid of my whole icloud account.

    In the set-up process I clicked "set up as new phone" when I should have clicked "back up from icloud". I can't use itunes for the back up as it is not current. Is there a way to get back into setup? If I click "delete accout" in icloud management will it clear just my phone (so I can start over) or will it actually delete my icloud?

    Settings>General, scroll to bottom of screen and tap Reset, choose to delete all data.  Then attach to itunes and choose to perform a restore.  You'll get the option to restore from icloud.

  • Moved from PC to Mac can I go back & bring bookmarks etc with me?

    I am giving Mac a try & want to use my PC bookmarks etc. Ibelieve I could have done this when I opened the Firefox account in Mac, but by passed download apps from Internet Explorer. Can I rectify that omission?

    You should be able to easily move your Firefox bookmarks to a new computer if you follow these instructions for [https://support.mozilla.com/en-US/kb/Backing%20up%20and%20restoring%20bookmarks Backing up and restoring bookmarks].

  • I never should have switched from mountain lion. Can I go back?

    Yosemite might be good for some pretty new interface and a bit of added security but it has created so many problems with JAVA, my wifi, and just my general attitude toward my mac that I almost want to go back to a PC.  *shudders to think about that*
    Can I go back to Mountain Lion painlessly?

    Thank You all for the words of wisdom.  What I ended up doing was taking a little extra time and trolling around the boards to learn more about ALL of my hardware.  Turns out, a bunch of my problems were created by my ISP.  They were trying to abandon the support for the service I had and restricted my BW down below normal dial up.  I talked to them and they said they had notified me through their email service which I do not use 2 years ago that they would be doing this.  Once I changed services my Sat ISP came back up to screaming speed (for us here in the middle of the desert)  The Java/ Safari issues were taken care of fairly rapidly once I was able to get back on line and contact the services I was using.  Thanks again for your support!  Happy Holidays MOU

  • HT204150 I dropped my iphone 4 in water and am using an older iPhone as backup.  When I restored my contacts/calendar, etc. Only the calendar updated correctly.  No notes transferred over and my contacts are from a year ago.  How do I get my more recent c

    I dropped my iPhone 4 in water and cannot get it to dry out enough to turn back on.  I may have fried the battery.  I am using an old iPhone 3 temporarily but cannot get all of my current info to sync.  My calendar is up to date but none of my notes have transferred over and the contact list is from when I originally used the iPhone 3 last year.  How do I get my iPhone 4 info synced onto the iPhone 3?

    Welcome to the Apple Community.
    You can't restore an iPhone 3G from an iPhone 4 backup. Until you get a replacement you can access your iCloud data at iCloud.com on a computer.

  • I was using adobe sendnow until now although at this time I came to Bolivia from Belgium. I can not send a file any more and can not suscribe either What can I do to keep on sending files?

    Can anybody help?? I was using the application locally for the last 7 months.

    Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
    I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable.

  • I lost allmost all my photos from icloud how i can get them back?

    I had ipad 2 and i backed up to icloud.then i bought ipad3 tryed to get all the photos (around 1000)and only 65 came to my ipad3 and to my iphone 5 am i doing something wrong?

    That happened to me. I had the 4s and I just got the 5. You have to go to Settings. Then general. Then click reset which is at the bottom. Then click erase all content and settings. It will restart your phone and erase everything but it will let you choose a backup to restore. So you click the backup that was before you got your new ipad. Everything should come back. The same thing happened to me and I lost all my pictures but I got them all back. Hope this helps.

  • Branch WAAS(547) missing from CM...can't add back

    Hi,
    One of our branch WAAS devices had the wrong hostname and I edited our DNS/TACACS and updated the hostname in the WAAS itself.
    I went to the Central Manager and deleted the old entry and went to the branch WAAS, enabled cms, disabled/enable the tcp promiscuous 61/62, and WCCP is up. I can see redirection happening on the WAAS and the router but the Central Manager does not have an entry for the WAAS device. I can also ping the central manager from the branch WAAS and visa versa. Everything seems to be working optimization wise but I can't figure out why I can't see the hostname of the box in the CM gui. It's been two days and it's not showing up.
    Here is the cms info on the branch WAAS (IP's omitted).
    waxxx-1a#sho cms info
    Device registration information :
    Device Id                            = 321765                             
    Device registered as                 = WAAS Application Engine            
    Current WAAS Central Manager         = <cm ip>                       
    Registered with WAAS Central Manager = <cm ip>
    CMS services information :
    Service cms_ce is running
    Do I need to delete the partitions on the branch WAAS or something? I'm at a loss.
    Thanks.

    Thanks for the reply.
    I have a central manager address configured on the branch WAAS but when I try to deregister it, I get this output that it failed.
    I can't follow the document because you need to select the device in the central manager to mark it replacable. The device doesn't exist in the central manager so I can't follow that document.
    waxxx-1a#cms deregister
    Deregistering WAE device from Central Manager will result in loss of data on encrypted file systems, imported certificate/private keys for SSL service and cifs/wafs preposition credentials. If secure store is initialized and open, clear secure store and wait for one datafeed poll rate to retain cifs/wafs preposition credentails.
    If encrypted MAPI is enabled, windows-domain encryption-service identities will be disabled. The passwords must be re-entered again the next time the WAE joins a central manager.
    Do you really want to continue (yes|no) [no]?yes
    Disabling management service.
    management services stopped
    Sending de-registration request to CM
    Unable to get Central Manager ip address setting. Please make sure 'central-manager address' is set
    Device de-regsitration failed.

  • Changed from Unlimited to Premium, can't change back

      Sorry, I see that this is a double post! My bad! Can't find a delete message option anywhere, unfortunately :\.   Hello, For the last I don't know how many years or months I have had a Spotify Unlimited subscription, costing me 4.99 per month. Recently I went on a weekend holiday, and for the duration of that weekend I wanted to be able to use Spotify on my smartphone. I upgraded to Premium, thinking: ok, Premium for the weekend, it'll cost me 5 extra, but it's worth it to me for now, and I'll go back to Unlimited when I get back home. So now that I was back home I wanted to change back to Unlimited, but I couldn't find a "downgrade" option anywhere. In another thread I read that I would have to cancel my subscription and that then the Unlimited option would be available again. So I did that: cancel my subscription. It has now ended, but I don't see an option for the Unlimited plan anywhere.  I don't feel treated in a way that's fair. If you had notified me beforehand that there wouldn't be a possibility to go back to my old subscription, I wouldn't have upgraded to Premium at all. Even an email telling me "sorry but the Unlimited subscription.. we can't afford to sell this any more, so you'll soon have to upgrade or cancel" would have been fine. But telling me I can't downgrade after I have upgraded.. well that's just pretty disappointing. In case I'm wrong: could you point me to a way to go back to my Unlimited subscription? And in case I'm right: could you let me know as well?

    I joined the forum today just to ask a question like this. I want to know if I can upgrade to Premium and downgrade to Unlimited in case I don't need Premium features. I hope someone can answer that...

  • Why does my iPod charge completely and then automatically go to Red? It's been doing this all day today... And sometimes it dies, but an hour later I can turn it back on. I don't want to buy a new battery!!!

    It just *****...

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar      

  • Can't go back or forward more than one page at a time, what happened to the little arrow that allowed you to go back several pages at once.

    some websites disable the back button. older versions of firefox i could hit the little arrow on the right of the forward button and it would display several back pages so i could choose which one to go back or forward to. now i go back as far as a disabled page and can't go any further. this is really annoying to lose a feature that i used all the time

    There are three options to access the history: (1) Click and hold the back button. (2) Right click the back button (3) If you really want the dropmarker back, install an addon: https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/.
    Hope that helps:)

  • Can we copy back songs from iPhone to iTunes library, once if deleted from iTunes library ?

    can we copy back songs from iPhone to iTunes library, once if deleted from iTunes library ?

    Have you not got a backup of your content ? iTunes will only copy back purchases that you made from Apple. For music from other sources you will need to find a program from another source which can copy them back from the phone - if you do a search on google you might find some. Or depending from where you got them from can you re-download them from those sites ?

  • Can't get back to OS 10.4.9 from OS 9.0.4

    Hi,
    Just bought/installed 10.4 and upgraded to 10.4.9. Everything works great; BUT, I used startup disk to select old OS 9.0.4 system folder to boot from and now i CAN'T get back to 10.4.9. Booting w/ OPTION won't give me the option, and OS support pages suggesting going to the Start-up Disk folder don't help since control panel only give me choice between MAC HD and Network driver. Do I really have to go buy an OLD OS like 9.1 or 9.2 to upgrade to? Apple should help with this...
    thanx much for info......
    Dual 450 G4    

    Hi, Devils Coup -
    Do I really have to go buy an OLD OS like 9.1 or 9.2 to upgrade to?
    No.
    Apple should help with this...
    They do.
    The version of Startup Disk control panel that comes with original OS 9.1 and earlier installs was not coded to be able to recognize OSX as a valid boot OS, probably because OSX did not yet exist when those OS's were written.
    There are four solutions in order to get back to OSX from your OS 9.0.4, with both OS's on the same, unpartitioned drive -
    (1) Update the OS to OS 9.2.1, using first the download updater for OS 9.1 and then the one for OS 9.2.1, or by using a retail OS 9.2.1 Install CD. This may not be satisfactory.
    (2) Boot from an OSX Install CD, and use its Startup Disk control pane to reset the boot OS to OSX on the hard drive. This is often not a convenient solution.
    (3) Upon booting or restarting, as soon as the startup chies sound press the X key, keep it held down until the machine starts to boot to OSX. This is perhaps the easiest, no-install required choice.
    (4) Update just the Startup Disk control panel in OS 9.0.4 to v. 9.2.1 (that's the version number for the control panel). This is the simplest long-term solution, one which leaves your OS 9.0.4 otherwise untouched. You can download just that control panel from this Apple KBase document -
    Startup Disk 9.2.1 Document and Software
    <hr>
    Do I really have to go buy an OLD OS like 9.1 or 9.2...
    No, but if you intend to keep OS 9 available on that machine for a while, it would serve you well to get a copy of the retail OS 9.1 Install CD or the retail OS 9.2.1 Install CD. Both of those contain current (for OS 9) versions of Drive Setup and Disk First Aid, hence serve as excelent emergency and trouble-shooting CDs.
    Booting w/ OPTION won't give me the option....
    One of the reasons for partitioning a drive so that OS 9 and OSX can be installed each on its own volume is to be able to use Startup Manager to select the boot volume at startup. Startup Disk is able to recognize only one OS per volume, specifically the last one booted to on that volume. So, if both OS's are on the same volume, only the one last booted to will appear in Startup Manager's screen. By partitioning the drives and placing each OS on its own volume, either can be accessed at any time in Startup Manager.
    Article #106178 - Startup Manager: How to Select a Startup Volume

  • Can I go back to iCloud 5.1.1 from iCloud 6

    CAn I go back to iCloud 5.1.1 from iCloud 6

    No, you can't go back.
    But you have to check here: Settings > Messages > Send and receive.
    Also check settings at the other iDivice's. These should NOT be the same.

  • I had to restore my iphone 5 from an icloud backup; how can i get all my imessages back on my phone? why isnt it syncing from icloud?

    I had to restore my iphone 5 from an icloud backup from a week ago. everything restored fine, but it only brought back my imessages up to the backup date (a week ago); but all the messages up to today are on my mac messages app on my macbook air; how can i get them all back on my phone? why isnt it syncing from icloud automatically if its still available on my mac? Thanks for any help!

    iCloud doesn't sync iMessages.  They are sent from the iMessage server to your devices, not synced between devices.  I don't think you'll be able to get these messages back on your phone, but you should be receiving any new messages.

Maybe you are looking for

  • Completely broken in Ubuntu: can't access profile

    I have a freshly installed Ubuntu 13.04 64bit. It came with Firefox 20 which was working fine, but was not the latest version. I ran "sudo apt-get install firefox" and it updated firefox to version 24. Now Firefox is broken and won't load. It systema

  • AttrValException + ADF 11g

    Hello, I am using Jdeveloper 11.1.1.2 version. Implemented the custom error handling as mentioned in the ADF fusion dev guide,but whenever entity/VO throws AttrValException from BC layer, exception is not catching in custom error handler even though

  • AFP Graphics

    When using AFP we are seeing over 69,000 different images in one print file which seems excessive especially since the images should be re-used. Does the LOG2PSEG utility have to be used to create page segments from graphics (LOG files)?

  • Assigning Creation Profile in the Vendor Master

    Help needed to find the release "Creation Profile" in the Vendor Master. I am not able to locate the input box in the Vendor Master "Purchasing Data" Tab. Already tried: Extras >> additional purchasing data >> data retention at plant level Purchasing

  • Having different page sizes

    Hi How do I have different page sizes? I'd like an A3 "front page" followed by a series of A4 pages. If i change the page size in inspector, it causes a "global" page change on all pages Thank you Tony