If i restore from my 4s backup on my new iphone 6 without installing ios8 on my 4s will it restore to ios 7?
Does anyone know if I don't update my iphone 4s to ios8 and then restore from its backup when my iphone 6 arrives if the iphone 6 will go back to ios7? Therefore requiring me to update it to ios8?
From what I am reading, iPhone 6 will come with iOS8 preinstalled from yesterday. But contact the store you have ordered it from to be sure.
Pete
Similar Messages
-
I just upgraded to the 5s but the sales lady did not restore from my last backup with my 4s. How do I get my pictures and settings restored? I cannot seem to get it to give me that option. Can anyone tell me what to do? Thanks so much!
If the phone has already been set up, you will need to go to Settings > General > Reset > Erase All Content and Settings to be able to go through the setup again. This time use Restore from Backup.
This will walk you through the setup screens:
Getting Started and Get-Started Apps -
I live in Canada. Each time I travel to the US, I lose all calendar entries. I have to erase all data, then restore from an iCloud backup. Tedious. iPhone 4, iOS 7.1, sync set to all events. I only use the default calendar. Do I have an incorrect setting?
I did find another point worth mentioning.
I use my iPhone 4 with a corporate Exchange email account. I had deleted the account from my phone just before I did this backup/restore process...and I thought my battery drain was much, much better (if not outright fixed).
Later in the day, after seeing my battery life improve to near-new behavior, I re-added my Exchange mail account. Considering I have 1 yahoo account and 3 gmail accounts, the Exchange account adds a 5th email account.
What happened? Battery drain back to "worst case". Removing or re-adding the Exchange account is like toggling between decent and terrible drain conditions.
Bottom line is that I re-added a couple dozen applications and battery life didn't change. By far, the Exchange account drains the battery worse than any other app and setting. This account must be polling very frequently and since people tend to send very large file attachments to that account, perhaps those effect the battery drain even though I have the account set to not download attachments.
Anyone running Microsoft Exchange might be able to confirm what I see? If so I can open an enterprise ticket with Microsoft and bug them on this issue. -
I choose to restore from a safety backup in iTunes. It works ok, but iTunes is still asking to restore the iPhone. Why can't I get to syncronise the phone?
I can't get the menue I am used to in iTunes. It only states "Klargjør iPhone" (Norwegian). Something like "Start up your iPhone". I've done this several times, restarted the iPhone and my computer, but I can't get ready to sync... The phone is working ok and my backup data is restored into the phone.Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
-Griff W. -
I lost my iPhone. If I wipe the device will I be able to restore my old iCloud backups to my new iPhone when I get it?
Yes. It will only erase the phone, not any data or backups from icloud.com. If you think it was stolen, you might want to read this: http://support.apple.com/kb/HT5668.
-
I began this crazy fiasco on Friday (it's now Monday). My phone didn't have enough storage to update to iOS8 via wifi, so I connected to my laptop. Thankfully I backed up my phone to iCloud & even saved pics manually onto my laptop before beginning the update via iTunes. My computer (PC, Dell Mini) kept making disconnection sounds (my USB ports are unreliable at times) so I began to think it wasn't going to work with the continuously broken connection (it was displaying a message in iTunes "waiting for iphone"). So I thought, well, if that USB port isn't working & it's already disconnected, I'll just switch the USB port real quick. BIG MISTAKE. I then got an error message saying the connection was lost & the update was interrupted. I clicked "OK" & then I was told that my iPhone would have to be reset to factory setting before it could be updated. GREAT... So I let it be restored to factory settings via iTunes. After that it updated to iOS8. Once that was complete I began the iCloud backup restore. It started Friday afternoon & ran for several hours, reloading many of my items. But then I had to leave work, & a wifi connection. My phone was away from wifi most of the weekend, but has had the spinning 'loading wheel' next to my "4G" icon in my status bar the whole time. Several of my Apps say their 'waiting' or 'loading' but they don't appear to be actually loading (hence, they're in the same 'loading' spot they've been in for days). When I looked online I found this:
How can I verify that the restore process is underway?
Go to Settings > iCloud > Storage & Backup. When the restore process is underway, the iCloud Backup setting is dimmed and you have the option to tap Stop Restoring.
But when I look at the Settings > iCloud on my phone, there's no "Storage & Backup." Instead, where that option should be, is a message at the very bottom of the page that says "Your iCloud account cannot be deleted because your iPhone is being restored." This is the only indication I have that it's still restoring, but like I said, the apps have not shown improvement in their loading. My phone has been back on wifi, connected to power source, & locked since 8:45am (it's now 9:45am).
Is my phone actually restoring??? Or is there a glitch & it's stuck??? Please help!Now it's Wednesday (2 days since I originally posted) & my iPhone appears to have finally restored all my apps, but it still says it's restoring from iCloud backup. If all my apps are restored, what else could it be restoring? IS it actually restoring anything at this point, or is it still in 'glitch' mode??? I've tried turning it off & back on & it continues to say that it's restoring.
-
Question about restoring from Time Machine backup because of new SSD
Hi,
I have a 15" Late 2011 MacBook Pro running 10.10.1 with a Toshiba hard drive inside. I want to replace the Toshiba HDD with a Crucial MX100 SSD. I use a Time Capsule to backup. After I install the SSD, I would want to restore my data to the new SSD using my Time Capsule, but I have a few questions:
1) My Mac shipped with OS X 10.7; My Mac is running OS X 10.10.1; Should I use Internet Recovery to start the restore (even though when I start OS X Internet Recovery it will download 10.7 recovery), or should I use a USB drive to start Recovery?
2) After booting into Recovery, do I format/partition the SSD into 1 partition, GUID partition table, Mac OS Extended Journaled, etc before restoring using Time Capsule?
3) Do I need to use Trim? Please tell me your opinion on the OS X Yosemite and Cindori Trim Enabler controversy.
4) How do I install Recovery HD on my new SSD?
5) Please tell me all tips you have about this entire process.
Thanks,
MikeThe ability to load OS X Internet Recovery is provided by firmware independent of the SSD. Just make sure your MBP has the latest firmware, which was released years ago.
You won't need a separate step to install OS X. Answered more completely in (2).
Merely format the SSD Use Mac OS X Extended (Journaled) and as many partitions as you desire. One is sufficient.
Only Crucial can answer that. You might be better off purchasing a SSD from a company known to support Macs, such as OWC / MacSales. I have several of their SSD products and haven't had to devote a moment of thought to Trim.
That's done by virtue of the Recovery firmware. It will recognize that no Recovery partition exists and will create one, after which you won't have to use OS X Internet Recovery (though it will remain an option).
If you obtain your SSD from OWC that's really all you need to know. Mechanically, it's not much more complicated than installing memory. As far as recovering the original HD's contents, restoring from the Time Machine backup is also straightforward. TM doesn't know and doesn't care that it's a SSD. -
How can I move Photoshop CS4 from an old MacBook to a new one without instal disk
Hi there,
I have purchased a new laptop and I would like to move Photoshop (CS4) to the new one but I don't have the disk.
Could anyone help guide me on how to proceed?
Thanks!Download CS4 and install it. Download CS4 products
-
After I did a backup from iTunes I noticed 3 of my contacts were gone and then tried to restore from a old backup, worked once and now it won't again. Why is iTunes restore not working correctly?
I thought all my contacts were saved in iTunes, never had this problem before. Besides manually restoring them myself, is there any other way to retrive them?iCloud
https://www.icloud.com/ -
How do i do a restore from an icloud backup?
how do I do a full restore from an icloud backup to a new iphone4
Connect the phone to a WiFi network. Go to Settings/General/Reset - erase all content and settings. After about 30 seconds you should be prompted to restore and given a choice of available backups. You will have to enter the WiFi passcode again if it's a secure network, as the Erase cleared it out.
See: http://support.apple.com/kb/HT4859 for more details. -
Unable to restore from my icloud backup
I backed up my 3gs via iCloud and purchased a new 4s. I was expecting to be able to restore from my iCloud backup, but when i tried, it said there was no backup information. I did reset the 3gs before attempting to get the restore started on the 4s. Could that have deleted my backup? I don't think it should have, but I'm not sure why else my iCloud backup is gone. It's screwed me pretty bad. I lost a lot of information!
Help!I had the same problem, too (but when switching from 4 to 4S).
Reason: The iPhone 4S had firmware 5.0.1, whereas the older iPhone 4 was updated to 5.1 already. The backups are incompatible and hence not shown!!
Solution: First update the 4S to the same (or newer) software version, then restore from the backup.
The update is possible without using iTunes, just update "OTA" ("over the air") from within the iPhone (General -> Settings -> Software update) -
I'm trying to recover a file and the app company said to restore from an earlier backup. My iPhone only shows the most recent backup. I've been searching the net for answers - I found the back up file and date sorted them (over 6mb of files). How can I get my iPhone to restore from an earlier backup?
I am on Windows Vista so I don't have Time Machine.
I have backed up the backup folder so if I mess it up, I have it in a separate place.
Can I just delete all the files with todays date in that backup folder and have it forced to the next oldest date?
Why doesn't the iPhone show a list of the least several backups.
Info:
iPhone 4S
Software version 5.1.1
Backed up to computer through iTunes (not iCloud)As you backup the iPhone in iTunes, it overwrites the last backup. Files are kept as they are changed, so that would explain how you get different dates in your backup folder. The only backups that are saved and not overwritten are the ones done just prior to a restore. You do have the option to go back in time on a Windows computer, however depending on the last time you set a restore point in Windows, it could be back further than you are willing to go.
-
Hi all,
My computer had been running really slowly for a while, so I decided to erase the whole hard drive and reinstall the operating system, and then I was going to restore the files I cared about from Time Machine. The main account, which had all my documents and photos, was FileVault-protected. The last thing I did before erasing the hard drive was to run one last Time Machine backup. As far as I remember, I always ran Time Machine backups with the FileVaulted user logged in.
I don't remember whether I was using FileVault 1 or 2. I had been using FileVault 1, but I installed Lion as soon as it came out and I thought I had migrated to FileVault 2 at that point.
Once I erased the hard drive and reinstalled the operating system, I browsed the Time Machine disk and, within the Users folder, there was no folder for the main user account. When I tried to reinstall everything by restoring from Time Machine backup, I'd get the option for all the user accounts, but when I tried to log in with the main one I'd get the dreaded "You are unable to log in to the FileVault user account "User" at this time. Log in failed because an error occurred." Finally, when attempting to restore from the Time Machine backup again, I noticed something strange: After the computer got to about 10% done restoring, it declared itself completed successfully and rebooted.
I've tried a number of tips that came up from questions about similar issues on the Apple support forum, but had no luck. Is there any way to get these files back? Did they ever even get backed up?
Thanks.Hroodbwai wrote:
I can't find it! not sure what's going on but the only folder shown is the " Shared" folder.
Did you have only the one user account? If there were others, they should also be in the "Users" folder. You probably won't have access to the files inside them, but they should be there.
From what can make out, it looks like it's not backed up any of the files for the filevault account. Can't see user folder when looking through previous backups in Time Machine galaxy view.
Are you doing that from a Finder window set to your internal HD, or your computer name? It should look something like this (with the Finder in List view):
|
|
I'd been logging out and backing up manually on a regular basis.
Scheduled backups should run normally; but they won't back up the File Vault sparse bundle, nor will any run manually.
The only time it's backed-up is when you actually log out.
You should have seen this window on logout:
|
|
followed by this one:
|
|
If you didn't see the second one, or cancelled it, the account wasn't backed-up. -
Imac won't restore from time machine backup after HD (hard drive) recall replacement
I have an imac bought in 2011, running Snow Leopard. It required an HD replacement due to the 1 TB Seagate recall - the replacement was done by a certified Apple repair station yesterday. Before the guy left he started a backup/restore from my latest time machine backup set. It failed. I attempted it two times and got error messages that it failed and the computer needed to be restarted to try it again. No luck. I called the guy back and he told me to call Apple Care. Not thrilled about that response since the guy had just left my house I did what he told me to do. (A quick sideline here: I recognize that a time machine backup should be no big deal and SHOULD work everytime, but it doesn't. It irks me that Apple is replacing my HD through no fault of mine and yet they don't allow the restore of data to be a "covered" expense in this process - this isn't just because this was an authorized repair guy - the Apple store would have done the same).
Back to the issue. When I called apple care they pretty much had me try the same thing again with an earlier back up set. To my knowledge, it didn't work. I say this because it looked like it was working and when I came back to the imac later, it had restarted and once again booted to the OSX install. (The boot disc is still in the imac). When I tried to boot from another location, one did not show up to boot from so I assumed that the data didn't transfer and it forced another restart. So, I tried something else. I tried to re-install the snow leopard OSX without using the restore function. That appeared to work and then when the machine restarted it asked if I had another mac and I chose the option to get the files/apps/etc. from my time machine backup. The computer chose what I can only assume is the most recent backup set (It chose what I know to be a subfolder that appears under the dated backup folder - Macintosh HD--which btw is confusing seeing as that's always the name of the HD on the imac). I again stepped away from the computer so it could do its thing for two hours. When I returned, I was back to the MAC OSX screen that asks you to choose a language. There were no more options to choose DISK UTILITY or RESTORE FROM BACKUP, etc. When I clicked on English it took me right back into the screen where you say whether you have another Apple that you want to transfer data from. I realized that the imac must have restarted and I assumed maybe it was because the boot disk was still in - except how do you get the disc to eject? I also initially assumed that the backup had somehow failed again and triggered a restart. I tried to choose the option to just set up the machine without transferring data and when I got to the choose a name for your HOME folder message I tried to enter the same name I had it as before and it wouldn't allow me to do so, saying that that name was already in use. I also tried a different name and that didn't work either - got the same message (I assume if it is not the same name that it won't sync up with the time machine data from the backup set). So, I almost tried the "select time machine backup" option again until I looked at my HD space. Clearly, there is space that has been used. HD space was 997 at the start and now it's 636. My initial thought is to somehow get back into the setup area where I can use disc utility and erase the whole thing and then start over but 1) I don't think it's going to work even if I could get back there 2) I have no idea how to get this thing to reboot into that mode 3) I can't get the boot CD out to even try to restart to see if this thing did what it was supposed to, SO NOW I AM TOTALLY STUCK! I have not called Apple Care back because quite frankly they were useless the first time. I have a call into the repair guy but who knows how much help he will be. In the mean time, I have a million things to do and a computer that isn't working - Whoever said Apples never have issues needs to be seriously censored!
A few other notes: I use Time Machine Editor to run my backups weekly. It was set up that way from the get go by an Apple rep who came to my house to get us up and running. Editor should not effect the way that time machine does its work, so I doubt there is relevance but thought it worth mentioning.
One other note is that the Apple Care agent tried to have me do something called a "Source" something or other from the disk utility screen but when she realized that my backup file (shown by date) contained many other sub files (11-27-12/MacintoshHD/MyNamesIMAC/etc.), it was not possible to run this operation - thus we aborted. Sorry I don't remember the name of the process and unfortunately now can't access that option to go find it.
If you can help me, I would be eternally grateful! I am open to having a phone conversation if you are willing to give me your email to mail you my number. I have so much work to do this week and this was the last thing I needed. Did I mention this was supposed to be EASY?
I used to be quite the geek with my PC - still on the learning curve with the mac but not enjoying it. I am fairly tech savvy and I can follow instructions for a step by step solution if you've got one.I got a recall and had the drive replaced. I have retored 3 timesa dn even had apple do the job and it is still not right. I still can't get a simple ghost of the data from time machineback tot he new drive.
This is Apple's explaination as taken from their web page.:
Restoring your entire system from a backup
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Recovery system (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility.
Note: If "You can't restore this backup because it was created by a different model of Mac" appears when restoring a backup that was made on a different Mac, follow the onscreen instructions.
I even posted this information on the community and apple removed it... because they don't like the:
Off-topic or non-technical posts
Non-constructive rants or complaints
But here is my experieince:
Take in 27iMac running 10.6.8, 5-7 days, what a joke, my boss will be happy to pay for a week without working. Finally get, "if you have TM back up, 3 days." Get machine back with 10.6.3, hit the R recovery, click TM back up, runs for 2 hours, reboots, looks great. Box up take back to office... update to install - OH NO, still running 10.6.3. Updates crash with no specific error on install, BUG PROBELM, nothing runs.
Call Apple... after hours, tells me to boot using 10.6.2 disk, wipe, reinstall OS, udate to 10.6.8, THEN do the restore. GREAT! Only thing 10.6.2 DVD won't read... now back on phone... take back to the store, Genius says, he'll ix it just like it was. PROMISES it'll be fixed.
Pick up next day, supposedly, booted to disk, wiped drive, reinstalled, updated to 10.6.8 and THEN did the RIGHT restore... Looks GREAT... apps run and 10.6.8 OS. Back to the office... NOT RUNNING right!!!... fonts messed up, drop box app needs new install, cocktail needs upgrade, Fetch not working, memorized paths gone... back ups locked out of permissions... ***!!
4 hours on phone with apple and still no rsolution - to missing "settings". Seems there are THREE WAYS TO RESTORE (according to apply tech)... Running MIGRATE ASSISTANT and being able to choose your files, including settings, "R" RESTORE after they load a new OS... or NOW WAITING for them to send me a bootable 10.6.3 disk and then boot from disk, w/o installing OS and doing a restore from TM. I think this is done via the disk Utilties application.
So now can't back up without doing a full 400 GB back up since permissons are screwed and possibly destroying any good back ups... can't work, like having hands tied behind back. WAITING for solution! Very upset!!!
I did my first restore just like they said and now an 10 days without proper machine. Just FYI. I thnk I am going to make the store do the tech work so I have somthing to fall back on. -
How many times can you restore from the same backup?
how many times can you restore from the same backup?
As many times as you want till you delete or modify it.
It's YOUR backup, a copy of all your stuff.
Not some copyrighted, access controlled bunch of bytes representing a picture, a song or a movie, with a bunch of lawyers from the entertainment maff1a hellbent on restricting what you can do with it.
Maybe you are looking for
-
Vendor already released from block,but showing block while creating pr-help
dear friends, my client is facing a problem in blocking of vendors. my client actually blocked the vendor in XK05 t-code. after some days again he want the same vendor. so they release the block, that is they removed the tick mark for block (for purc
-
HT1386 Has anyone had problems syncing photos to iPhone 5?
I synced my new phone today and it says "Downloading 21 of 804" in the photos folder. It's been doing this for over an hour. Anyone else have this problem?
-
We are facing problems when trying to connect to the MBEan Server of BEA weblogic 6.1, when using mx4j. the error comes in the queryMBeans call of RemoteMBeanServer class of mx4j. Anybody aware of this problem? The exceptions that were received are:
-
Hai all, Very good evening to all, I Myself completed PG in Geology and Bsc In geology, I wanto to learn SAP ABAP . So, Plz give me the suggestions and the hw would be the getting job in the market with my qualifications, Plzz help me for my future.
-
Setting up a ConnectionPoolDataSource
Hi, I've got some problems with the ConnectionPoolDataSource. Similar to the J2EE 1.4 Tutorial I'm trying to set up ConnectionPoolDataSource. Therefore I created the following entries in my targets.xml: (1) <target name="create-jdbc-connection-pool_s