If I restore my iphone 3G what firmware will it install

if I restore my iphone 3G what firmware will it install

The most up-to-date version for iPhone 3G is 4.2.1

Similar Messages

  • I updated my iphone 5 and now it is telling me to be able to work i had to connect it to itunes and itunes it telling me that i have to restore my iphone.  what can i do? i dont want to lose all my pictures and stuff like that.

    I updated my iphone 5 and now it is telling me to be able to work i had to connect it to itunes and itunes it telling me that i have to restore my iphone.  what can i do? i dont want to lose all my pictures and stuff like that.

    Something went wrong with the update, this can and does happen with every version of iOS.
    There is nothing wrong with the update.
    Simply restore the device via iTunes on the computer.
    If iTunes is stating it will take hours to update, that indicates an extremely slow Internet connection and is likely the reason the OTA update failed.

  • HT201263 How do I solve error no. 1050? I can't restore my iphone! What do i do next?

    How do I solve error no. 1050? I can't restore my iphone! What do i do next?

    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • The capacity becomes smaller everytime after I restore my Iphone. What can I do?

    The capacity becomes smaller everytime after I restore my Iphone. What can I do?

    The iPhone can only sync with one computer. If you synced it to a different computer and you did not first copy the iTunes library from the old computer to the new then your phone's content was erased.

  • If I restore my iPhone to factory settings, will I loose my texts?

    If I restore my iPhone to factory settings, will I loose my texts?

    OneLuckyWoman in order to avoid this please backup your iPhone in iTunes.
    Follow the steps in this article to backup your iPhone in iTunes: http://support.apple.com/kb/HT1766
    Once you've done that, you will need to restore from that backup which this article tells you how to do. And than your text messages will be restored as well. I hope this helps. If you have any questions please just let me know.

  • I restored my iphone but now it will not power on fully.  The Itunes plugin appears.  I plug it in and restore as requested but the phone never restarts like it says it will.  I have done this several times now but nothing. Suggestions?

    I restored my iphone but now it will not power on fully.  The Itunes plugin appears.  I plug it in and restore as requested but the phone never restarts like it says it will.  I have done this several times now but nothing. Suggestions?

    Sounds like time to take it back to Apple for repair.
    Allan

  • If I pre-order my 16GB iPhone 5, what day will I get it?

    If I pre-order my 16GB iPhone 5, what day will I get it?  I live within the continental US.

    Since it's not available for pre-order yet, no one can answer that question.

  • Officejet Pro 8600 N911g new firmware will not install.

    My printer: Officejet Pro 8600 N911g
    Current Firmware: CLP1CN1416AR
    My problem: Downloaded the latest firmware update (Version CLP1CN1322CR). When I go to install it, my printer shows as listed, but in the STATUS cloumn, it is listed as "Not applicable".
    I turned my printer on/off.
    I tried updating via network, and when it checks for an update, it states there are no updates avaiable.
    I tried updating via USB.
    I tried updating via the LCD panel on the printer, and when it checks for an update, it states there are no updates avaiable.
    Is there something wrong as to why this current firmware will not install?
    Thanks for any help.

    New Firmware (CLP1CN1416R) was installed automatically (Printer was set for "Auto Update").  Prior to new firmware install,  printer has performed flawlessly...no problems.  Immediately after printer updated it's firmware automatically I began to have multiple problems. 
    First, it kept asking me to perform an "Alignment" which I dutifully performed only to have message come back that 'Alignment Failed".  Printed sheet looked fine, and printer printed fine but now before any page will print the "Alignment Recommended" message comes up which I have to then override (Click 'Do Not Align' button at bottome of 'Alignment Recommended' message box.  This is getting really OLD!!  Simply unacceptable for a business class printer!! 
    Also, the printer randomly has started giving other messages such as "There is a problem with the printer or ink system" AND "Cartridges are Missing" ("when I've just recently put in new catridges and levels are OK!!) AND "Paper Jam" (when there is no jam!!) 
    None of these problems have occurred prior to the automatic firmware update.  I believe the reason HP hasn't posted the new firmware update to their Customer Service website is that they know there are bugs in it and don't want to compound the problems the new version has already created.  I seriously question why an automatic updating of firmware was done with equipment set to "Auto Update" and yet that same new firmware is not available to those who might have had their printers set for "Manual Update". 
    HP Customer Service - You need to issue a statement from the company as to what has happened with this firmware update.  If there are problems, take responsibility for it and make it right.  HP knows who it sent out auto updates to.  These printer owners should be immediately notified and the situation made right.  It is not real assuring to have your front line staff not know why the new firmware is not on the website.  I do not like the idea of having to pay for a Support Call when the problems with my out of warranty printer are directly tied to the Auto Updating of said printer with apparently defective firmware.
    I'd really appreciate a response back from someone in HP Customer Service.

  • What version is the iPhone currently (what firmware).

    What firmware (version) does the iphone come on when you open it from the box?

    this is from the box if i were to buy it today right

  • Restoring my iPhone to older firmware

    Is it possible to restore my iPhone 3GS/ iPod Touch 4th gen (both running ios 6.1.3) to ios 6.1.2?
    Thanks in advance...

    no ios device ever officially supported any type of downgrade of firmware

  • If i restored my iphone from being disabled will the serial number change?

    I restored my iphone from being disabled. I did not check my serial so im not sure if that happens?

    No, the serial number and the IMEI number do not change, they are burned into the firmware and are permanent.

  • Have tried to restore my iphone 4 and it will not restore

    i have tried to restore my iphone 4 three times and it still will not restore. I have also had to do this once a week for the last 4 weeks

    Take a look at this link, http://www.apple.com/support/iphone/assistant/restore/
    What is going on with your iPhone to need to restore it each week, you may need to take it to Apple for an evaluation. 

  • HT201210 I can't restore my iPhone 4 because it will not take iOS 7

    I can't restore my Iphone 4 because it's not able to take IOS 7. The phone won't switch on and Itunes wants to restore it to 7

    Gatesescapee wrote:
    I can't restore my Iphone 4 because it's not able to take IOS 7.
    When you're ready for help,  provide specifics (precise wording of errors) of the issue that is occurring.
    <Edited by Host>

  • HT201210 cannot restore my iphone 5. After attempting to install a new update 3 times. Never had a problem with this before?

    Cannot restore my IPhone 5, after attempting to install the new ios 7.0.6 software. Checked and approved by my internet security. My phone keeps asking me connect to itunes. My phone will not restore, can anyone help. My phone very important for my work. Please, thank you.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.

  • What OS will be installed if I erase my Mac?

    I have updated my MacBook Pro to Maverics 10.9.2 and lost connection to SMB. I want to downgrade to my former OS or something to solve this. Do you have any suggestions?
    If I follow this guide http://support.apple.com/kb/PH14243 to erase and reinstall OS, will the new OS be Mavics or can I choose?
    BR
    Simon

    That procedure will reinstall Mavericks. To return to your original version of OS X:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet
                if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

Maybe you are looking for

  • How can i install Lightroom on a second computer?

    I've been using Lightroom on my PC for years (NOT the CC version).  I want to install it on my laptop so i can use it while travelling.  I believe that the license allows for that. But how do i install it? When i try to do it from the website it take

  • Getting error while running jnlp file

    Hello, I have generated jnlp file succesffully, but when I run the jnlp file I got this error: WARNING: com.sun.javafx.css.StyleHelper lookup caught: java.lang.IllegalArgumentException: No enum constant javafx.geometry.Pos.center_right               

  • Missing Role Grants after datapump

    Hello OTN-Community, I have a problem with datapump. I am using some include filters to get the relevant data exported. One of these filters inlcudes the ROLES of my database which starts with a certain expression. After the export into another datab

  • Unable to install HP Officejet 8600 Pro Plus Driver on MacOS Maverick

    Hi,  I have not been able to install HP printer driver on my Mac.  printer model: HP Officejet 8600 Pro plus operating system: MacOS Maverick 10.9.3 I have tried all the advices found in the forum including deleting all the old HP files etc and still

  • Toolbar dll missing

    I cannot remove the Verizon Broadband Toolbar from Add/Remove Programs because the dll is missing. I haven't had Verizon internet for almost 2 yrs. Can anyone help me remove it?