If I restore my iPod 4th generation to its factory settings, will iOS 6 still be installed?
I mistakenly updated my iPod to iOS 6 and I wanted to restore it hoping it would downgrade back to iOS 5. Soo if I restore my iPod 4th genartion, will iOS 6 still be installed?
No, it would not revert to iOS 5. Restoring only means removing your personal settings, apps and other things. it would not downgrade the iOS version.
Similar Messages
-
Okay, so somebody stole my Ipod, 4th generation, and it don't have IOS 7, it has IOS 6.1.4, and apparently I was tracking it with police officers this morning and when I get home from school (now, 4:26) it appears that it's offline and I can't see the location no more, so my question is... Can they still find out where is it located?
Your carrier might be able to locate it if it's on their network and they are ordered to do so by the police or the courts. It can't be tracked with Find My iPhone if it's offline.
-
I found a Jailbroken Ipod 4th Generation and its locked what do i do to setup default?
I found a Jailbroken Ipod 4th Generation and its locked what do i do to setup default?
You may be in possession of stolen property.
Take the phone to an AT&T store and report that you found it.
If anyone tries to register it, even with a current AT&T account, that they will not be able to since the account info is basically tied with the iphone Serial #, and IMEI #s. -
I was trying to restore my ipod to it's original factory settings. I can't restore it because i don't have permission request a permitted resource. What can i do in this situation?
What is the exact wording of this error message? Perhaps it's one of the errors listed in this article.
iOS: Resolving update and restore alert messages
B-rock -
Trying to restore 80GB iPod Classic back to the factory settings.
I am using Windows Vista Home Premium, and need to restore 80GB iPod Classic back to the factory settings, due to it being corrupt and the device doesn’t show up in iTunes 10 or on my computer. I've done the 5 R's twice and I am still seeing a box pop up on my computer when I connect the device that says:
“Do you want to scan and fix (F)?”
It gives me the following two options:
1. Scan and Fix (recommended)
2. Continue without Scanning,
Option #1 says, “Unable to perform the scan because Windows cannot access the disk.
Option #2 does nothing.
When starting my computer with the device connected a black screen says:
Checking File System on F:
The type of file system is FAT32.
One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue.
Windows will now check the disk.
Volume serial number is 3141-****
Windows is verifying files and folders . . .
Folder \iPod_controls is entirely unreadable.
Folder entry removed.
Folder \calendars is entirely unreadable.
Folder entry removed.
Folder \contacts is entirely unreadable.
Folder entry removed.
Folder \notes is entirely unreadable.
Folder entry removed.
File and folder verification is complete.
Convert lost chains to files (Y/N)? Yes
I’ve tried both options numerous times and nothing works. This is about to drive me to either drinking or wearing one of those stylish white I Love Me Jackets.
HELP ME . . . PLEASEI've used option #1 & #2. I've tried the press & hold menu & center buttons numerous times. The device does not show up in iTunes, It does show up in Windows Explorer as "Removable Disk (F), but when I try to open it, a box pops up that says, "Please insert a disk into Removable Disk (F).
When the device is connected to my computer via USB Port, the device screen has an Orange Circle with two rotating Arrows in the centern& says, "Connected", Eject Before Disconnecting
I don't know anyone who has a Mac. -
I restored my iPhone 3 g to its factory settings and I tryed to connect it to iTunes on my laptop and it said This iPhone cannot be used because the required software is not installed. Run the installer to remove iTunes. Then install iTunes again. HELP!! PLEASE!! Because I cannot get on my iPhone!!
Hi, Mommacat26.
Thank you for visiting Apple Support Communities.
This usually means that a required component is missing. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
If the issue persists, try installing the Apple Mobile Device Support driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows XP or Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
1st gen touch - if i restore to factory settings will it still remain on v 3.1.3?
1st gen touch - if i restore to factory settings will it still remain on v 3.1.3? I seem to remember paying five ponds a few years ago to receive a software upgrade - will I lose it? (am wanting to sell it so need to erase stuff)
Yes. It will remain at 3.1.3
-
How do I restore my Mac OS 9 to its factory settings?
how do I restore my Mac OS 9 to its factory settings?
Insert the install disk, restart with the C key held down, select the internal drive, choose Erase Disk from the Finder's Special menu, and install an OS onto it. If you are shown an installation screen instead of the Finder straight away, erase it from Drive Setup if not given an explicit option by the installer.
(74920) -
How to restore mac air late 2010 to its factory settings?
How to restore mac air late 2010 to its factory settings?
To restore the Late 2010 MacBook Air to factory settings:
1. Insert the OS X thumb drive that came with your computer, hold the Option (Alt) key while your computer is starting and choose your USB drive.
2. Choose your language, and go to Utilities menu > Disk Utility.
3. Select "Macintosh HD" on the sidebar, go to Erase tab and erase the disk. This will delete everything that it's in the hard drive.
4. Close Disk Utility and reinstall Mac OS X. Remember to install the iLife applications from the thumb drive after installing OS X -
i tryed charging it on like 3 diffrent chargers so its not the charger and well i tryed reseting the ipod and it works for alittle while then it starts doing it again i just got my ipod in decemberr and well i dnt think it has insurancee what do i do ?do i buy a new one or can they fix it?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I'm needing help restoring an iPod touch 5 back to factory settings because I purchased it used
I'm needing help in restoring an iPod touch 5th generation back to factory settings. Because I purchased it used from a family member who can not remember their password or sercuity question answers
They need to call AppleCare, ask to be transferred to the Account Security team.
-
Lost an ipod 4th generation but its offline
the ipod has a passcode but has no way to connect to the interent to be found, what should we do?
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Restoring my ipod all the time to factory settings??
I've installed itunes 7.0.2 on my computer and connected my new ipod nano 2nd generation (4GB).
I always get the message from itunes that i have to restore the factory settings on my ipod...
Please help...
thanksI always get the message from itunes that i have to restore the factory settings on my ipod...
you might be getting a Windows drive letter confusion here. for troubleshooting advice on that possibility, see the following document:
"iTunes has detected an iPod in recovery mode - Use iTunes to restore" -
need to restore to factory settings to see if it fixes my problem with screen being black but has volume
What exactly happens when you
Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software -
On the settings I went to iCloud then went to storage and backup and it saus total storage 5.0 gb and avaible storage is 2.7 gb but all of my photos arent there. Then when I click manage storage it says camera roll 2.0 gb is there any way i can get my photos back? please help
If you use the same iCloud ID and before you will get your contact, calendar and notes and other iCloud things back. If your previously has PhotoStream one you will also get back the last 30 days of photos.
It appears you do not use the same iCloud ID.
What do you see for Contacts, Calendar and Notes when you go to icloud.com and sing in with the same ID. You need a computer browser.
You may be able to get the photos from the restored iPod by:
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
http://www.pcrecoverytools.com/ipod-data-recovery.html
Maybe you are looking for
-
ABAP and JAVA Stack ( Double Stack ) doesn't work with TDMS 3.0 correct ?
Hi all I was in Walldorf and spoke with some Basis SAP persons and they told me that a "old" "Double Stack" SAP couldn't transfer with TDMS. Is these answer correct and if its yes on which Guide i could read these ? Thanks for help SAPERLE
-
Can apple tv be used to play purchased movies without broadband via airplay
can apple tv be used to play purchased movies from a ipad without broadband via airplay
-
Reg jdbc communication channell proccessing
I have scenario i.e JDBC to RFC but i need small calrification like is it possible to trigger the jdbc sender communication channel automatically whne the file tirggerd from the orcle Database like without giving the any polling intervals CC should
-
PE10 Foto Downloader: Creating Sub Folders
Hi, I'm new to PE10 and I want to choose a new concept for managing my photos. Subfolders like Year Month from the creating date of the photo (JJJJMM - I need the german date format. JJJJ is for the year ) and a costum file name. I've no problem to
-
Can't update my note 3 to lolipop it says error 402 anyone know why thanks