If I scale photo in Ai, does ppi changes too?
I have some photos (14 photos) and I need to add it to one composition and print it. Photos are 72 ppi, I can make it 300 ppi in Photoshop but I don't know if it's necessary? If I scale it down does the ppi of the photo increases?
Mumblefluff,
For Illy, the photos are just a black box of pixels, so when you change the size, the number of pixels is the same so the resolution changes in inverse proportion.
Photos are 72 ppi
You may see it this way: each photo is a specific number of pixels (by pixels), and you can stretch it or compress it as you like without that number changing, so size and resolution are inversely proportional.
Similar Messages
-
ISO 7 move and scale photos for wallpaper does not work
Move and scale photos does not work when using photos as wall paper
What a nightmare! Had I known what was in store for me, I would never have updated my iPAD Mini to iOS7.
The calendar with it's ultra-thin Helvetica is near impossible to see. To add insult to injury, not being able
to move and size a wallpaper photo is just totally unacceptable. So annoying when software is thrown out
there for the general public when it's obviously not ready. I tried the solution:
Go to Settings > General > Assessibility > Reduce Motion "set to OFF"
Next, in Settings > Wallpapers & Brightness > Choose Wallpaper (pick the wallpaper) - you should now be able to "Move and Scale" the photo that you've chosen for your wallpaper.
After you've SET the wallpaper, you can go back to Parallax motion by turning Reduce Motion to "ON" (see step 1)
And it just DOES NOT WORK. Plain and simple. I am so tired of Apple products that have bugs that we are all expected to work through and work out while paying anywhere from $500 to $2000 for a product. And of course you can't get online support in a quick, efficient manner. My big old $600 bite out the Apple is tasting mighty sour at the moment. -
Scale to frame size, does it change clip resolution?
do you lose resolution on the chip when you do this? thanks!
It is a bit more complicated than that.
If you use the Scale to Fit you lose the pixels you are not seeing. So if you want to scale it up a little larger, like almost back up to the size it was before, you are going above 100% of the "new" image that was scaled down, and therefore you will have less of a quality image.
If you use the Motion effect's "Scale" parameter, you do not throw away the unused pixels so you can scale it back up to 100% without a loss of quality.
Therefore, if you plan on panning around the image, like Ken Burns, you want to use the Motion effect.
If you just want to use it at the new smaller size, then you are no t going to lose much visual quality either way, but keep in mind that there are less pixels and therefore the picture will not be the same. If it was vibrant and exiting at full size, it may not be quite so stunning at a smaller size. -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
when ever i click a picture in photo booth it does not automatically update its content is this a bug or i don't know how to do it?
whenever you click a picture in photobooth you have to manually insert it one by one in iphoto
i want to know is there any other option in iphoto which can do this type of thing(adding pictures automatically to iphoto )
so that i do not have to do it manuallyOnce you take the photo with Photo Booth, select the photo in the tray at the bottom and click on the iPhoto button just abouve and to the left:
Click to view full size
That will import the photo into iPhoto automatically. But PB does not import any and all photo taken into iPhoto automatically. That choice is left to the user.
OT -
when ever i click a picture in photo booth it does not automatically update its content is this a bug or i don't know how to do it?
Once you take the photo with Photo Booth, select the photo in the tray at the bottom and click on the iPhoto button just abouve and to the left:
Click to view full size
That will import the photo into iPhoto automatically. But PB does not import any and all photo taken into iPhoto automatically. That choice is left to the user.
OT -
iPhoto keeps crashing! - then needs to repair the library. This is happening each time I import photos or even try to go in to an even and delete photos etc. Does anyone have any suggestions? Please it is so frustrating - I used to love iPhoto - now I regret upgrading to Lion
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
Why does iPhoto change the sort order of the photos in my album when I attempt to share via Photo Stream?
Did anyone find a good way to sort the shared albums better, so that the ones you share with can better find their way around.
You can arrange them manually in an album, select all and use the Photos ➙ Batch Change ➙ Date to menu option and check the box to add a set interval between photos. That will let the photos be sorted by date and be in the order you want:
OT -
If i download my photos into iPhoto does that use up more hard drive space?
If I download my photos into iPhoto does that use up more hard drive space on my mac?
iPhoto and Lightroom are similar apps - although LR is a far more capable app - and that the price it should be, of course. But the two apps are similar in that they both offer
Photo Management
Non-Destructive Processing
So, essentially, they both play the same part in the workflow.
The procedure would be to
Download the images from the camera into the Photo Manager (regardless of which one you choose)
Review and select in the Manager
Trash the unwanted with the Manager
Process the images - that is, in most cases edit them.
It is at this point - and only this point - that Photoshop might come into play. Both of these apps can act as a 'front-end' for Photoshop - after all, they're the Managers. But in truth, if you're using Lightroom then you very likely do not need Photoshop at all, and for anything that does require layers you can use one of the many - much less expensive - alternatives. But I think the common experience is that with Lightroom (like Aperture) the requirement for the sledgehammer that is Photoshop really fades away.
So pick one horse and ride it. Choose between LR and iPhoto. Use it like it's intended. Don't get involved in other necessary apps. Don't review before bringing the photo into the manager - that's what the manager is for. -
I successfully synched photos from my mac book iphoto to my new iphone 5 (icloud did not do the job). Now these photos appear on my phone in three places--iphoto app, last import, and photo library. Does that mean that they take up three times the memory? Will that affect iCloud? Sorry for the end-user questions!!
HHi, thank you for the reply. I have checked my iPad and iPhone and neither has iCloud Photo Library (Beta) enabled. Turned off in both. Photostream is turned on.
i tried to sort it out by dragging all the photos to Events on the Mac and then deleting them from iCloud - (left hand side of iPhoto under the section 'Shared'). the photos now show up in Events. I did force quit but the issue remains. The message reads ' photos are bing imported to the library. Please wait for import to complete.'
i can't empty iPhoto trash either. The message read "Delete error. Please wait for import to complete.'
WHen I was moving the photos to the Events I always had a message about duplicates - to the effect that the photos already existed, did I want to import them? I clicked on Yes, import all duplicates. But when it showed the images - duplicates side by side - one showed the photo and the other was blank.
I really don't know what to do! And I don't know how to handle my iOS devices. Is it to do with the large number of photos? Any help, advice appreciated. -
My photos "favorites" folder does not sync between devices
my photos "favorites" folder does not sync between devices
Hi
Try Settings> Itunes & App Stores> Automatic Downloads - Turn on Music and Apps
http://www.apple.com/itunes/inside-itunes/2012/04/automatically-download-your-bo ok-music-and-app-purchases-to-the-devices-you-choose.html
This is how iPhone 4 works running on IOS 6.0.1...I'm less familar with iPAD 2
Cheers -
Having installed aperture 3 and imported iphoto library (15000 photos) Apertue 3 does not render most of my photos corectly most a blurred pixellated and distorted. Reverting to photo produces perfect results. Any suggestions
Galdaplh,
What do you mean by "reverting to photo"? "Revert" is not a function in Aperture so you must be talking about something else.
If you just performed the import of that many photos, Aperture will take some time to generate thumbnails. You can see if it is doing this sort of thing by {Command}-{Shift}-0 to show the Activity window.
Once Aperture generates all its thumbnails, you will have nearly instantaneous access to much, much better thumbnails than Aperture uses immediately after importing photos.
nathan -
I have an HP photosmart premier c310a printer and have good results with color photo prints, but I can't seem to get the printer to print my grey scale photos in pure grey scale. They have a color cast to them that ranges from near sepia to slightly purple.
Is there a way to correct this and get clean true grey scale prints. I have tried all the usual stuff like cleaning the printheads, using fresh ink cartridges etc.
I am using Adobe Elements 9 with windows 7 home premium and the printer is setup both wirelessly and with a USB connection. The results are the same regardless of which version of the printer I use.Thanks for the reply. I checked for proper cartridge venting as you suggested and all were OK.
Since I originally posted this problem, I have tried various thing to see if I could "trick" the printer and force it to print in true grey-scale. The best results I got was to tell the printer that it was printing on plain paper and force grascal printing. I got a reult that was close. Actually using plain paper got me even closer, but close is not good enough. I had an HP printer before the one I have now which gave me beautiful Grey-scale prints and I assumed that this later generation printer would do even better. Guess I should have stuck with the older one. -
I have a pop up about Photo stream which does not allow me to click ignore or settings - nothing happens when pressed........I cannot click on anything - the screen seems to have frozen and having tried to turn off I cannot slide to turn off. Please can e frozen and having tried to turn off I cannot slide to turn off. Please can you help
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
For highest photo quality what should ppi be to look good in Retina? In photoshop should I use "Sharpen Edges" as I would for in use for web?
There are about 1 trillion threads and replies about the size of images to be used and accepted when using iBA.
Obvioulsy you have not taken time to search the forum before asking your question, nor do you seem to have downloaded the iBA asset guide.
I suggest you go to Apples iPad page on the store and check the screen dimentions/ resolution for a non mini iPad retina. DPI at 72 or above is your choice.
I also suggest before setting out on a book project, you take time to read the forum and download the PDFs which are available.
A KT states in effect - first do your own home work before starting out asking questions and that way you will avoid the proverbial self inflicted wounds - which will follow because it seems you have not yet actually spent time learning about iBA or read the help files.
This forum will gladly spend time and effort to help folk... but most dont really have time to continually givie answers which already exist on the forum.
Maybe you are looking for
-
Logging open and close of documents?
I'd like to have a record of when I open and close documents, so that I can support my diary notes of jobs I've been working on. So I need to have the filename recorded. I can find an app' to log application usage; is there one for file usage ? regar
-
I have a Digital Persona Fingerprint Reader on my laptop. This feature allows you to swipe your finger and open up saved sites and log-ins. It worked fine with the previous version of mozilla but when I try to use it now I get a message that says, 'F
-
Multiple files in file adapter
Hi My requirement is i need to pick all the files with different names from a folder through sender side file adapter. i give the source directory name... from that directory i need to pick all the files with different names. So how to achieve this r
-
Captilization of the materil Via Stock Rote
Hi I need some clarification Can we captilize the materil Via Stock Rote ,Please Explain How the materail can be booked to asset with Stock route (Blank Acct Assingement) Regards Sameer
-
Hello, I have been look at my code and I can`t see where my missing operator is.That I get an error for.Can anyone help me. cmdAddress.executeUpdate( "Insert Into Address " + "([FirstName], [LastName], [Address], [City], [State], [Postcode], [Country