If I switch to another company will I loose my SDN id?

I understand that my SDN id which is "marjan" is tied to my Service Market Place id. If I switch to another company I will definitely loose my Service Market Place id. How can I maintain my SDN id if I switch company? Any ideas?
regards,
Marjan

Once you have a new id you can email [email protected] and ask them to migrate your account over

Similar Messages

I am wanting to put the new firmware on to my iPhone 4 and am wondering if I do this from another computer will I loose all my data - i.e music

I am wanting to put the new firmware on to my iPhone 4 and am wondering if I do this from another computer will I loose all my data - i.e music

No you will not lose any data. However a pop up will come up telling you if you want to sync with this computer, and that if you do, that it will erase the data. Just click "No" and you can still update your phone. I've done this a few times.

If i sync my iPhone with another iTunes will i loose all my apps and photos?

If i sync my iPhone with another iTunes will i loose all my apps and photos?

All iTunes content on your iPhone will be removed first.
Unless you transfer photos from another computer when doing so, the photos transferred from the other computer will not be touched.
Photos/videos in the Camera Roll are not part of and not touched with the iTunes sync process.

If I open a PDF doc in a new tab and then try and close the tab with ctrl-w it will try and close all tabs unless I switch to another tab and back again.

Running Firefox beta and Adobe Acrobat 10. If I open a PDF document in a new tab, say http://support.avaya.com/css/P8/documents/100146419, and then try and close the tab using ctrl-w, I get the message warning me about closing all tabs. If I switch to another tab and then back to the PDF document and then hit ctrl-w, it will just close that one tab and not all tabs.
Cheers.

I've just been playing around and I set dom.ipc.plugins.enabled to true and now it closes the PDF document but not the tab. I have to do ctrl-w again to close the tab. However, leaving that set to true ruins the scroll mouse functionality as Acroread seems to want it all to itself.

NFirefox will not allow me to click on a link without switching to another program first. The version is 3.6.8. This problem makes Firefox virtually unusable. Help!

Firefox will not allow me to click on more than one link in a sequence. After one click, I am forced to switch to another active application before returning to Firefox and clicking on another link. I have seen this problem posted by others, but I can't find an answer by Mozilla. Since this problem makes Firefox virtually unusable (version 3.6.8) I would hope that Mozilla would offer an answer ASAP. Until then, I'm stuck with Explorer.
== This happened ==
Every time Firefox opened

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

Add-ons contain a range of compatible Firefox versions, and Firefox honors the listed range by disabling the add-on if you are trying to run it on an unlisted version.
I'm sure Yahoo! will update its toolbar eventually, but not every add-on maker supports beta versions of software.

Hello! I have an iMac that I lose the audio output for certain profiles. The audio output will work on one profile, but when switching to another profile, I lose the audio output. I've reset the NVRAM/PRAM and that hasn't solved the problem. Help!

Hello!
I have an iMac (running iOS 10.6.8, not upgraded to Lion) that I'm having audio issues with. I have 5 profiles on this machine. The audio output will work fine out of one profile, then when switched to another, the profile will not have any audio output at all. Rebooting the machine will occasionally solve the problem. Administrator permissions are not the issue since this has also manifested itself on the administrator profile. I've also reset the NVRAM/PRAM and that hasn't helped. All my software is up to date and I recently upgraded the RAM to 2x2GB sticks. This problem was existing prior to the RAM upgrade.
Any suggestions? Thanks in advance!

Hi Tony,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

HT5557 I books will not let me switch to another book. the same book keeps coming up and I don't know how to get to my other books.

In I books on my I pad mini the same book keeps coming up and will not let me switch to another book in my library. How do I switch books.

Tracii6,
VoiceOver is a great feature on the iPhones. I am sorry you are not able to turn it on. You have come to the right place. When you go into VoiceOver and you hit OK. Then double tap where it says on. This will turn this feature on. If you are wanting to remove the feature you would do the same thing but double tap on the OFF.
RobinD_VZW
Follow us on twitter @VZWSupport

Whenever I have a pdf document open, and then switch to another tab to view another webpage, the scrolling function on the touchpad will not work. This seems to be a glitch with Mozilla, according to Dell. How do I fix this?

When I open a pdf document (like an E-version of a newspaper) in Mozilla and then switch to another tab to view another webpage, I am unable to use the scrolling function on the touchpad. I have to use the up and down arrows to get other pages to scroll. When I close that pdf document, everything works fine. I talked with customer support with Dell, and he said it was probably a glitch with Mozilla. So I tried to do the same thing on IE, and there was no problem scrolling with the touchpad while a pdf document was open on another tab. I would like to get a fix for this so I don't have to keep closing open pdf documents in order to scroll with the touchpad while on other tabs. Thank you

Hi elliezzz,
If you are having issues with your iPhone not being recognized by iTunes, you may find the following article helpful:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
- Brenden

Settlement of WBS to the Fixed Asset in another company code

Hi Friends,
I have another problem with WBS elements and fixed assets.
I used WBS elements to create a AUC by AUC settlement in company code A. Then I put a second settlement rule with settlement type "FUL" in WBS element and settle AUC to a depreciable asset in company code A. Then I transfer the depreciable asset from company code A to company code B. Now I put the current month as the end day of the second settlement rule and add a third settlement rule in WBS element in compnay code A. The third settlement rule will settle to the depreciable asset in company B. When I am adding the third settlement rule, the system gives an error: "Asset XXXX not in company code A" .
Then I add another WBS element in company code A and put a settlement rule which settle to the depreciable asset in company code B. The system did not issue any error. Everything works fine.
So it seems the WBS element cannot settle to the asset in the other company code if it created a AUC in its own company code.
People told me that it worked in their legacy SAP system. So I am wondering whether there is some settings that I did not do, which caused this problem.
Do you have any idea about this?
Thanks,
Ting

in the requesting company codeon the wbs master data enter the company code for which the AuC and the fixed asset will be created
in this way you can settle from a project in one company code to an asset in another company code

How To Force User to Fulfill validations in view before switch to another view in infopath 2012

i have a form with different views
,, every view has some validations ,, how to validate each view's validations before switching to another view
if manual how to do that ?

Hi Ahmed,
You can use custom validation for verifying all the fields with required data, and write rule in you submit button to disable till all the fields are entered with valid data. Enabling submit or switch view rule after validation will help you on this regards.
You can also use internal flags for enabling disabling submit button if required, or just make all the fields required OOTB.,
I usuall use expressions to validate the form for values, this will help to check multiple fields atonce.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/39160c15-2074-4f27-b9bc-5b0a20d2d29e/validate-30-fields-on-infopath-form-before-swiching-view-or-submit-form-data
here are some links for reference,
http://office.microsoft.com/en-us/infopath-help/introduction-to-rules-HA010381865.aspx
http://office.microsoft.com/en-us/infopath-help/add-rules-for-validation-HA101783369.aspx
http://sharepoint-mattharmon.blogspot.com/2013/03/conditional-validation-rules-infopath.html
http://www.bizsupportonline.net/infopath2007/infopath-basics-3-ways-validate-data-infopath.htm
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

HT5467 How do I switch to another AppStore ? (From US to Israel)?

How do I switch to another AppStore ? (From US to Israel)?

If you do not have a credit card tied to a physical address in the country's store that you want to buy from, you will not be able to purchase from that store.
Settings>iTunes and App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to country/region in the popup window to change the store

When I am on a Youtube video that is running and I want to switch to another tab, the Ctrl+ tab number does not work, is that intended functionality?

When I am on a Youtube video that is running and I want to switch to another tab, the Ctrl+<tab number> does not work, is that intended functionality?

This can happen when the video player (Flash plugin) has the focus.
In that case the plugin consumes all the key presses.
You will have to click with the mouse elsewhere on the page or in the user interface to make keyboard shortcuts work.

Company is merging with another company. How do I add other company's Bonjour/Messenger buddy list to our company's Bonjour/Messenger buddy list?

So the company I work for is merging with another company. Our company already has an internal Bonjour/Messages set up so that we can all communicate to each other. The company that we're merging with has the same.
How do I merge their Bonjour/Messenger Buddy List with our Bonjour/Messenger Buddy List so it's all in one list?
Much thanks!!!

Hi,
It will depend how and where the other computers are.
Broadly speaking any Mac computer on the same LAN using iChat or Messages with the Bonjour account enabled will see all the other Macs (The app reads the computer User's Contacts App (Address Book) My Card and broadcasts the name)
This works up to the point you go beyond 255 computers or devices.
The router will have one IP allowing for 255 devices to be connected.
To state this another way.
The Bonjour account in Messages or iChat is a self connecting, self populating Buddy list.
Your Name is read from the Address Book on older systems or the Contacts app in Mountain Lion and above at the one called the My Card and this is broadcast as your "Screen Name".
You see the names in the Buddy list that correspond to other peoples My Card.
On this iMac I am using I am "Ralph Johns"
On my G4 tower I am "Ralph G4" and on my laptop I am "Ralph MacBook Pro"
This means if I hook up the three using Bonjour I know which is which.
(As an aside this also allows me to separate them out on AIM and Jabber lists as well as I have the My Card for this computer and Address Cards for each others)
7:51 pm Friday; February 14, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

A bridge? A switch? Another router?

I had a internet modem connected via ethernet cable to a Linksys router (the wireless ability had been deactivated) and then I ran from the Linksys one ethernet cable to one Apple Express (N) and another ethernet cable to another Apple Express (b/g for some G3 Macs). The internet stopped working so I plugged the modem directly into the N Apple Express. I guess I need to get rid of the Linksys. What should I get to replace it so I can run the N and the B/G Apple Expresses again? A bridge? A switch? Another router?
Thanks,
P.Hyland

When you plugged your Express devices into the Linksys router, did you first configure them to act as a "bridge"?. In other words, the Connection Sharing setting in AirPort Utility must be set to "Off (Bridge Mode).
You would need to do this for both Express devices as follows:
Open Hard Drive > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Internet icon at the top of the setup page
At the bottom of the next page, look for the setting for Connection Sharing. This must be set to "Off (Bridge Mode) whenever the device is plugged into a router.
Chances are, your Linkys is fine and the Express devices were not correctly configured to connect to the Linksys. If you connected the Expresses to your old Apple router (I'm assuming it has LAN ethernet ports as well), they will be configured the same way. So, whether you use the Linksys or the Apple, configure your Express devices as above.
So, your network will look like this:
Modem > Router > Express Devices > Computers can connect by wireless or they can connect by ethernet to the Router.

If I switch to another company will I loose my SDN id?

Similar Messages

Maybe you are looking for