If I type a long e-mail, the cursor starts to disappear at times, if I make an error and delete it, or sometimes it just disappears
I have Win7 Pro, using TB 24.6.0. If I type a long e-mail (I haven't counted the letters, the number would be many), then the cursor disappears off & on. The cursor disappears mostly when I make a typing error, backspace or delete the error. Eventually, I can't continue typing--cursor is gone. Sometimes the cursor has relocated to the beginning of the e-mail (top of the frame) and I have substantial difficulty moving it back to where I stopped typing. I cannot just click on where I stopped typing
I saved one of these e-mails as a draft, and noticed there were many letters/junk at the end of the e-mail and one e-mail recipient told me she's seeing similar lines of letters/junk at the end of my e-mails.
I've tried running TB in safe mode, but didn't have reason to type out a long e-mail while it was in safe mode so I'm not sure if it recurs in safe mode or not. I don't really have any add-ons. I mostly use the defaults TB assigns at download.
Haven't had this problem before, it's a very annoying problem.
May I ask why? Have you learned that that specific problem is solved in a pre-release version? So far I've upgraded once on your advice, now I've upgraded again to 31. Problem's still there. Unless I'm told that the problem's been solved for sure in a latter version, I'm not going to upgrade because sometimes the upgrades bring problems w/them for a low tech user. I don't want to chat, etc., I just want to be able to send and receive e-mails.
I'm still working with the security software people re: some continuing issues w/FF.
I'd like to spend more time doing my work, or communicating w/friends, not dealing w/software problems.
Is there anyway of my finding out what, if any update, includes whatever is needed to solve my specific problem? I use Win7 Pro, SP1, 3.40 Gz processor, 3.19 Gb usable RAM, 64 bit OS. I don't know what other information is needed.
Similar Messages
-
My iPhone will no longer picks-up the wifi at home(comcast). My mom used to have comcast and I used to connect there as well, but she changed to verison and I connect there, but no longer can get the comcast wi-fi at home. The wi-fi settings are ok there, but blank at home now. The phone's network settings are fine because I can join other wifi networks. I've done a reset with no results. Is there a manual way for me to restore the comcast wifi from the router?
First thanks for the reply and second sorry about the confusion. I was unable to get the full message out, but here's the problem:
Like I had mentioned, for a long time both me and my Mom had comcast and as soon as I came into both dwellings the phone would automatically jump onto either wifi network. Then a while ago she verison and used the same Belkin router. So there was no problem and my phone jumped on her system as usual, but at some point something happened and when I got home I noticed that the phone asked to be put on my system. I would input the password, but it would say "unable to connect" to the network. I did the standard things like check the network settings on the phone itself and they were fine. Then I did a reset (actually twice) with the same result. It seems like the phone ability to pick-up wi-fi is ok because when I go to my University I can log-in with no problem. The only thing I noticed is when I look at the settings (on the iPhone) for the router at home the whole thing is blank. My question is: Is there a manual way to get the phone to pick-up my router? I need to have it on my network at home because I use DocumentsToGo a lot. Thanks again for your response again and I hope things are clear now. Have a great day.
Michael -
When I type my email address in the "To:" field, a random name comes up next to it as "Holidays in United States". This just started happening out of the blue and I have no idea why. Does anyone else have any idea?
Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
When I open Mail the fans start up and only stop when Mail closes. This began two days ago.
Previous to that I never had any problems with Mail; but Safari has been very slow on occasions. I don't know if the 2 pbs are linked.You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox Profile Folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created -
When deleting a user created folder from On My Mac in Mac Mail the sent messages that are part of conversations that reside there are not deleted, only the received mail gets deleted. Any way for both the received and sent mail that resides there to be deleted?
I create a lot of project folders where i keep all my conversations regarding the project. Once the project is finished i would like to just delete the folder and get rid of all the emails associated with it but when i delete the folder i've noticed that only received messages are deleted. Now I am stuck trying to sort through my sent folder for messages that were returned there after the conversations was supposedly deleted.Mail/Preferences/Viewing - un-check include related messages, delete the folder, then go back and reset yo include.
-
If I want to delete the photo library from my iPhone, how do I make sure I dont delete them from my desktop as well?
If you have copied them to your computer, then you will be OK. Just deselect the photos when you sync.
-
Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.
-
Just converted a bunch of my dad's old vinyl to digital via the ion ez vinal converter. However when I went to burn the music, which sound fine over the computer, to a cd it says there is a writing error and kicks out the disc. Can I correct this somehow without having to import these all again?
Update yrou OS to 10.6.8.
The problem is not with iTunes or the file so you won't need to import them again.
Try a different brand of disc. -
I can't turn on my Mac Book Pro. If I press the power button will beep 3 times (won't turn on) stop and beep 3 times again. What can I do?
Three beeps at startup almost always indicate bad RAM. You probably need to get your RAM replaced. Bring it in to Apple for a definitive diagnosis if you are unable to run the Apple HardwareTest
Using Apple Hardware Test - Support - Apple -
Premiere Pro crashes when I open my project because the cursor is stuck on a time-lapse sequence
I have a Time-lapse sequence which I have just built and saved the project of, but my cursor has stopped on the time-lapse sequence. Premiere Pro does crashes when I open my project because the cursor is stuck on the time-lapse sequence.
My project was saved in Premiere Pro with the cursor stuck on my new time-lapse sequence. Now, Premiere Pro crashes when I try to open the project....Please help URGENTLY?>It may be a corrupt font, but I have thousands installed. Is there any way to test for that?
Reply #8 was specifically to address this question.
>I basically wanted to know if this is a 3.2.0 issue or not.
That's not what you asked. Perhaps asking a specific question will get you closer to a specific answer?
The titler does not crash for me at any stage of the Adobe updates for Premiere Pro, including 3.2.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ -
After folling the instructions to clear a -50 error and deleted the .tmp file, I now am getting a -120 error. I can't find instructions to clear this...What next?
Hello jimlcoff,
I found a couple of articles with steps you can take when you are not able to connect to the iTunes Store. I recommend reviewing the following articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I am trying to move Acrobat XI to a new computer. (Mavericks to Mavericks) Toward to end of the install when 'scripts' a being installed I get an 'Installation error" message. No number or reason just a message to contact the software manufacturer.
I am using a copy of a previous download of Acrobat XI, clicking the .dmg and then on the install package.
Originally, the Acrobat software was brought into the new computer by the Migration Assistant.
Does the install assistant need to be in the mix somewhere? -
Updated to Mountian lion 2 mnths ago had nothing but problems,I had no problems with lion, so i had a tech reinstall lion, Now agian I am having problems with the cursor freezing and disappearing in photoshop and not being able to use type in word, safari, mail, photoshop6 ,lightroom4 any suggestions as I don't believe apple is going to doing anything,thy've stuck thier head in the sand and ignored it.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Why when replying to an incoming mail, the cursor for editing type go all glitchy
Since updating to Maverick editing and entering text, particularly in'reply' emails to be all over the place. If i type something in error, and try to amend it, the type insertion bar does not represent where the type ends up being inserted. Any ideas?
Still doing it. So frustrating. HELP!!!
-
I'm not sure what happened. However, I can never see the URL in the address bar anymore.
I go from page to page, and the URL shows only for a split second, then disappers.
All the address bar says is "Search or enter address"
I copy and paste a lot of URL links for work, so this makes it very painful and a hassle now.
Where now i need to go back, right click on a link, and do "copy link location".
Where as i used to just go up to the address bar and copy the URL.
Also, I notice now when I start typing on certain search boxes.
The cursor automatically jumps to the URL address bar as soon as I start typing. Which is really annoying.
It will only do it once it seems....but its annoying when i try to type a search...only to see that i've been typing in the URL address box cus it jumped up there.
PLEASE HELP!!!!Try some basic troubleshooting.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Maybe you are looking for
-
A/P Invoice Draft convert to actual A/P Invoice Error
Hi all, I had a problem as of mention in the Subject header. First of all, I am using SBO 2004.2B and 2004 SDK. I had created a small program to read in text file to create A/P Invoice Draft, no problem up till now. However, when I convert the A/P In
-
Information about daq card AT-M10-16E-10
Hello friendsI found in the desk from my prof. a old daq-card with this number AT-M10-16E-10. On the Website of NI i cant find information about this card. Can you give me some tips how i can find information about this card? many thanks for the supp
-
Encrypt a column in a oracle table
Hello all, is it possible to Encrypt and Decrypt a column in a Oracle table. And if possible which method can we use.. Thanks & Regards Pratik Lakhpatwala Jr Oracle DBA
-
Hi, experts I want to send the Smartform to mail as PDF attachment. I found the program in code gallery., it name was 'ZTEST_NREDDY_PDF_MAIL' . I wrote my program .it was send the Smartform to mail as PDF attachment but when open the pdf file it g
-
Hello, Is there somewhere a log file that shows wich files are copied (from HD to HD, to a burning Program, or copied over the network). Thanks