If I unplug my time capsule will I lose data?

want to hide the time capsule before leaving home for a few days. Hard to hide it when it's plugged in and running. If I unplug it, do I lose data, and how difficult is it to start back up?

You will not lose anything.. it is stored in the hard disk.. but do not unplug whist the hard drive is active. Shut down the computer before you shut down the TC.. then you can hide it.
When you get back.. turn on the TC.. wait two min. turn on the computer.. should be fine.

Similar Messages

My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?

My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?

I was having this problem while still using Mavericks -- it started after a Mavericks update last spring. During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected. Its gotten a little better, but still happens to at least one of my devices every day. Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected. It's just sloppy, poorly written software for technology that isn't working the way it should. If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected. With those turned off on all devices, TC stayed connected to everything for over a month. The day I turned Continuity back on, all the problems started again. It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.

I used an ethernet cable between my iMac and Time Capsule for the initial backup. Now that initial backup is concluded, can I simply unplug the Time Capsule from my computer?

I used an ethernet cable between my iMac and Time Capsule for the initial backup. Now that initial backup is concluded, can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly. Is this assumption correct?

can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly. Is this assumption correct?
Yes, if the computer will be able to receive a strong wireless signal from the Time Capsule.
I did not disable wireless. So I assume the backups are occurring both with the ethernet and wirelessly.
It is inot possible to have both an "active" Ethernet and "active" wireless signal simultaneously. If an Ethernet connection is established, your computer will default to the Ethernet connection. If the Ethernet cable is unplugged, the computer will revert to the wireless connection.
I also show 2 wireless networks available through Airport. Shouldn't there only be one now?
You have a simultaneous dual band Time Capsule. That means that it will always be providing both a 2.4 GHz and a 5 GHz network.
I named my new network the same name as the old network. This enabled all of our devices to continue with their connection without entering the new network and/or passwords; however, I am afraid this may pose problems in the future somehow. Any input on this issue as well?
Things should be fine. Devices will connect to the best signal.....either 2.4 GHz or 5 GHz....based on their capabilties and location in relation to the Time Capsule.

Time Capsule will not reset

I'm trying to delete old user devices from my access control list, but after I remove them, the Time Capsule will not reset properly. After I delete one of the devices, click on Update, the time capsule gets stuck during the update and never fully resets. If I pull the plug and restart the time capsule, it reverts back to it's previous state with the devices still in the access list. Is anyone having this trouble?

Dear Stephen,
I have the same problem and I found this thread describing the same thing on another forum. Each time I try to change any setting this happens (i.e., TC won't reset and I have to unplug it before I can use it again).
When the postings in the mentioned thread are any indication no reset (hard or soft) will have any lasting effect. But of course, I will try to reconfigure and see what happens.
Any solution or localization of where the source of the problem (firm-/soft-/ or hardware) would be highly appreciated:)
Best
Rene

Time capsule will not hard reset

Have a older time capsule will not reset any method. Light just keeps flashing yellow

Can you access it via the airport utility.. if so you can reset via the utility.
When you press the reset button with a paperclip or toothpick you should feel the switch.. it is fairly normal switch effect like the keyboard. If in the past you pushed too hard you have bent and jammed the lever.. so it is now broken.. the only way to fix it is to open the TC and fix the lever arm.
BTW the light always flashes yellow.. when you have done a successful reset it simply flashes faster.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Time capsule will not back up/sparse bundle is already in use?

Time capsule will not back up/sparse bundle is already in use?

Thank you. After reading more, I turned off time capsule in system preferences, shut down computer, unpluged and pluged back in time capsule. Turned computer back on and the problem went away and time capsule successfully backed up.
There is an old rule in boht PC and MAC world, try reboot first, ask later. I often forget it.
Thanks again.
Quarto

I lose my Internet connection, unplug my Time Capsule for a while, plug it back in and get my conne ction back. What may be causing that?

I lose my Internet connection, unplug my Time Capsule for a while, plug it back in, then in a few minutes my Internet is connected again. Can someone tell me what to do? Thanks

I was being jovial..
SL is snow leopard.. If you are on 10.6.8 you are on SL. Your initial post says 10.5.6 but I assumed you had upgraded to Lion or worse Mountain Lion.
Don't whatever you do update.. that is out of the frying pan into the fire.
You might need to give more network info..
What is the TC plugged into for broadband.. are you on cable, adsl, other.. is the TC in router mode.
I find with SL, the later versions of TC firmware much worse than earlier ones.. So I do recommend you check your TC and if you are on 7.6.1 then downgrade to 7.5.2 .. you do this by holding the option key when you select update firmware.. it will show you downgrade options as well as upgrade.. only this is not possible with newest Gen 4 TC which are stuck on 7.6.x firmware.
How do you connect to the TC is the other question.. and with what?? Is this issue computer only or iphone ipad etc. ie is your network wireless or ethernet (or both) does the issue affect both?

My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

What model is your TC? What is the firmware?
I recommend you do a factory reset and use short names.. not apple recommended names.
Short.. 2-20 characters .. less than 10 even better.
No spaces.
Pure alphanumeric.
Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
The TC runs too hot..
Look on ebay for "Time Capsule power supply"
You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
If you can DIY it is really only a few dollars worth of capacitors that go bad.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
For a bunch of alternatives.

My 2 TB Time Capsule's memory is full because it will not automatically delete old files as it is supposed to, so it is giving me zero backup of my two computers now. How can this be fixed so my Time Capsule deletes the old data and saves the new?

My 2 TB Time Capsule’s memory is full because it will notautomatically delete old files as it is supposed to, so it is giving me zerobackup of my two computers now. How can this be fixed so my Time Capsule deletes the old data and savesthe new?
Neither my local computer consultant nor I have been ableto change any of the settings in Time Machine to correct this problem. Working with the choices in the TimeMachine, there does not appear that there is any way to change the frequency ofthe backups either, so, after a year has elapsed, the time capsule is full, andmy only choice appears to be to erase all the current data on the Time Capsuleand start over, something that I do not want to at all let alone repeat on anannual basis. My questions are:
What can be done to have my Time Capsule delete old filesas it is supposed to do, so it has memory available to allow my computers toback up?
Is this a software problem that can be fixed online or isdoes this require a mechanical fix of defective hardware?

How much data is being backed-up from each Mac? (see what's shown for Estimated size of full backup under the exclusions box in Time Machine Prefs > Options).
Is there any other data on your Time Capsule, besides the backups?
Most likely, there just isn't room. Time Machine may be trying to do a very large (or full) backup of one or both Macs, and can't. Since it won't ever delete the most recent backup, there has to be enough room for one full backup plus whatever it's trying to back up now, plus 20% (for workspace).
Also see #C4 in Time Machine - Troubleshooting for more details.

My time capsule will allow only one machine to connect to the internet at a time. Connection sharing is "off" on the Airport Utility. When I try to share an IP address I get the message that "DHCP range that I entered conflicts with the WAN IP address" I

Suddenly, my time capsule will not allow more than one computer to connect to the internet at a time. On the Airport Utility on the internet tab, Connection Sharing is "Off (Bridge Mode)" When I try to change it to sharing an IP address, I get two messages that the beginning and ending DHCP addresses that the DHCP addresses I've entered conflict with the WAN address of my Apple wireless device."
Any ideas?
Thanks

I use a DSL to connect to the internet. The modem is a Westell C90-810030-06. Two things happened in connection with the fail. I upgraded the firmware in both my Time Capsule (connected to the DSL) and the Airport Extreme (connected to my printer--used to extend the network). I also upgraded my Colof Nook to the Android Faux Tablet version. I can't imagine that that is creating some sort of mismatch.
I have now downgraded the firmware on the Time Capsule to 7.4.1 which is what I had before. Fortunately, I found the trick to downloading the older airport utility to find the older firmware. All the older versions disappeared from my computers.
I still have the same problem. Wifi works fine. If a second device connects to the wifi, then it works fine, but the first no longer has a connection.
And my Airport Extreme is not working at all. It cannot be seen by the computer. I tried resetting it. I'm going to connect it by ethernet and downgrade the firmware on it.
I appreciate any help. This is so frustrating.

After formatting my HD and eventually restore my system from a backup on Time Capsule, will I still have access to my old backups as normally used to do via Time Machine?

I have a Time Capsule (4th Gen) and my backups on it, I need to completely erase my hard drive. My question is: after formatting my MacBook HD and eventually restore my system (OS X 10.6.8) from a backup on Time Capsule, will I still have access to my old* backups as normally used to do via Time Machine?
*(-and to the newer backups- if I had not restored my system from the last backup).
THANKS

That's a good question. Technically, Time Machine should make a new backup but not erase any old backups. But if there isn't sufficient space on the backup drive, then I'm not sure if Time Machine will simply warn you or just go ahead and remove old backups to make room for the new ones.
In any case, the new backup should have a different backup folder on the backup drive. That's my understanding. You can learn more at pondini.org.

If I use airport utility to erase my time capsule will all my settings be lost? Does "import configuration" work well?

If I use airport utility to erase my time capsule will all my settings be lost? Does "import configuration" work well?

Erasing the Time Capsule's internal HDD, via the AirPort Utility, will NOT affect the TC's configuration settings. However, if your intent is to completely remove these settings as well, you will want to perform a "factory default" reset on the TC to do so.
If you first export the configuration, you can always import it back in after the reset to get you back up and running quickly.

Time capsule: will it work wirelessly without disrupting my wireless system?

Time capsule: will it work wirelessly without disrupting my wireless system?

This type of setup is difficult, and not officially supported by Apple for good reason.
Before you attempt this, you should know that this type of setup will require a "double hop" wireless connection for backups.
In other words, for your Mac to back up, the wireless signal must travel from your Mac to your wireless router......hop one.....and then travel from the wireless router to the Time Capsule....hop two.
This doubles the chances of an error occurring and unfortunately also doubles the amount of time that it will take for a backup to occur.
I've tried this type of setup a few times as an experiment. It gives new meaning to word "SLOW".
In addition, the Ethernet ports are disabled in this type of setup on the Time Capsule, so it is not possible to use them for any purpose.
Bottom line....the fact that the Time Capsule can possibly be configured this way.....does not in any way imply that it should be configured this way.

Time Capsule Will Not Connect to the Internet

I would appreciate any help or suggestions with my Time Capsule problem. We have a 1TB Time Capsule, in all of 2010 it worked great. We had 2 Mac Books backing-up to it daily, never had a problem. We purchased an iMac this month and I migrated the setting from one of the Mac Books onto the iMac, no problems. However, now the Time Capsule will not back-up either the iMac or the other Mac Book. The Mac Book that I migrated all the information from hasn't been turned on since the migration. Yesterday, the Time Capsule no longer allow us to connect to the internet. I contacted my ISP to ensure internet service was active and plugged the exisiting Mac Book (we still use) into the cable modem and was able to use the internet. This morning the TC wouldn't allow audio streaming to an ATV. Any ideas on what to do to correct the problem?

I'm good with erasing all former back-ups on the Time Capsule and starting fresh with the iMac. Please tell me how.
o Open AirPort Utility - Click Manual Setup
o Click the Disks icon
o Click the Disks tab just below the Disks icon
o Click the Erase button in the center of the window
The Quick Erase option will be fine for your purposes. This will only take a moment or two.
When you are ready to backup the iMac,
o Connect it to one of the LAN <-> ports on the Time Capsule using an ethernet cable
o Open System Preferences (gear icon) on the dock
o Open Time Machine
o Click Select Disk
o Click on your Time Capsule to highlight it
o Click Use for Backup
The backup will begin in a few minutes. Allow a long time for the backup. A good time to start this is late at night so you can let the backup run overnight.
Message was edited by: Bob Timmons

If I unplug my time capsule will I lose data?

Similar Messages

Maybe you are looking for