If I unpug the power cord to PhotoSmart Plus will it loose it's WiFi settings?cc=ca
I want to move the printer to another room and had sooo much trouble getting the WiFi to work properly, I am wondering if unpluging the opower to the printer will reset the printer loosing all the settings
It shouldn't.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
The power cord to my hp photosmart plus printer b209a does not work. what can i do?
The warranty for my computer's printer is up, but the printer has not turned on for quite a while. After going through the HP troubleshooting - nothing seems to work. When the power cord is plugged in, the green indicator light does not light up and the printer will not turn on at all.
Here's the steps to follow if your printer isn't turning on.
If you've gone through all those steps and you still don't have power, there are a lot of places that sell a replacement cord and supply for that printer.
I am an HP employee. -
Does a Laptop Warranty Cover the Power Cord?
Hi, I bought a HP Envy Touchsmart 15 and it is still covered by warranty. However, I cannot find any support help online such as the support chat which I find very odd since I just used it about a month ago when my battery died! Where did all the support go?
Anyways, when I plug in my laptop, the LED by the power port does not come on, and my laptop will not charge or turn on at all. My battery is dead, but I know it works becasue it is less than a month old. Since my laptop will not run on AC power even with the battery removed, I feel the power cord is the problem.
I would really like to know if my warranty covers the power cord, and if so how do I contact HP, since there is absolutley no information when I go to "Contact Us" besides the consumer forums.
I am a ECE student at UT in Austin, and every day I go without a laptop is hurting my grades. So I need help ASAPHi
Yes, power cord, adapter are covered under limited warranty. HP would replace it for you if it's faulty.
Check warranty: http://h10025.www1.hp.com/ewfrf/wc/weInput?cc=us&lc=en
These are what I could find to help you:
Contact HP: http://h22207.www2.hp.com/us-en/contact-hp
Contact HP in Texas:
http://m.hp.com/us/en/store-finder/find.do?type=authorized&searchType=LOCALAREA&displayedAddress=787...
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker, & phone only). Was this former-feature now an oversight?? I'd really appreciate having my Bluetooth once again listed as a choice of audio option. Especially considering the battery life is not what it was prior to this update, and requires recharging often.
Sorry to tell you but unless you have a Retail Apple Store close by, they are the only ones I have found with all the adapters and accessories. I bought an extra lightning to usb adapter the other day to use in my truck. Good luck....
-
I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
<E-mail Edited by Host>Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ -
My MacBook Pro 13'' shuts down randomly while connected to the power cord.
Alright, so my Mac is shutting down while being connected to the power cord. Though, when I unplugged it, it runs just fine.
I've read up on the other random shut downs but they seem to be different in my case. I was only surfing youtuve on Firefox, granted I had a few other tabs open but they weren't doing anything that would run the computer hot, and it shut down out of no where. The battery was full and it was still connected to my power cable. The screen went blank and the computer was completely off. I noticed that the light on the plug in wasn't on and switch the outlet that the computer was plugged into and replugged it into my computer. The light came on and after about three or so times of pressing the power on button it came back to life. Though, it stayed on the start up, white apple page and just spun. After a while it looked as if it was about to go to my password page but it shut down after gently moving the computer. The power cable light went off once again. I unplugged it and replugged it into my computer but the light would not come back on. After just removing the cord and pushing the button a few times my computer came back to life and I logged in as normal except for the fact that after it came back on the date and time was reset and several applications needed permissions. It also randomly logged me out of my Facetime account as well.
All in all I was wondering if anyone else had a similar problem and know what's going on or if this is new. Could it be some kind of spark in the power cable from a broken wire that made my computer shut down or is it something attacking my computer?Please make a Genius Appointment and take it in for service.
-
my ipod is frozen..i have an image of itunes and the power cord on the ipod screen
What happens when you connect the iPod to your computer and try to restore via iTunes on the computer?
-
My laptop crashes - i think it's the power cord but i'm not for sure
I have a 2 year old Toshiba Satellite Laptop model # A205-S4707. I bought it brand new in 2008, but I just recently started having this problem. I at first thought it was a problem with the video card because what will happen is the video freezes up and will show different color lines or a black or blue box. I thought the window air conditioning unit by my desk being on may have something to do with it because I started noticing the issue at the beginning of summer when I started using the window AC. The problem would normally happen when it would be loading my programs when I first turn it on, but now it crashes 30 minutes to an hour or maybe 2 hours after I turned it on. I than thought it might be my power cord since there's a couple places in my power cord where the inner wire is exposed, so I taped the areas and plugged it back in and it still crashes, but not as much as it used to. The other day it wanted to crash every time I tried to start my laptop up, and since it would just crash after 2 hours of it being on. And this morning it wanted to crash while loading windows twice when I had it plugged in, but when I unplugged it it's working fine. Something tells me it's the power cord causing the issue - anyone else have any experience with this issue? If so, how can this issue be resolved? I can't go on depending on battery usage because I like leaving my laptop on when I'm asleep (I have it turned off when I'm at work - so it's on probably 15 hours a day). If anyone can help me, I'd appreciate it. My OS is Windows Vista.
THanks,
MikeI have an 18-month P305 series Satellite and for a while (approximately 8-9 months ago) I couldn't figure out why my laptop would all of a sudden shut down while everything was working fine, or sometimes it even shut off when I press the power button to turn it on. My laptop was also acting pretty wierd with the Illumination Buttons, they wouldn't respond and froze, wouldn't light up after the computer has turned on and sometimes it won't turn off if the computer's been completely shut down, yes, the lights still stay lit afterward.
Just last week, when I was moving my laptop around to adjust for comfort, the thing shuts down on me again, this time I realized that the ac light had a 'quick' flick and this tells me that there is something wrong with power supply, either DC jack or the cord by the plug. I usually disconnect the battery when I have it plugged in to preserve the life of the cells. So when every time this thing becomes loose, the laptop would shut off. I was actually blaming the problem with bad BIOS and and maybe faulty updated drivers. The other day, I held the wire (by the socket and the fuse) and kind of twist and turn it and sure enough, I lost power, and the ac light flickered. I knew right away that was the problem. I found an identical original OEM power supply on ebay for $15 shipped, received it today and all is well. All this time, the culprit was the power cord.
My advice is to take the battery out and run the power from the AC cord, wiggle and turn the 'wire' slightly by the dc jack, also, test the plug to the DC connecter; hold the barrel (the plug socket to the computer) and wiggle it, if it doesn't shut off then it's the wire and you need a new power supply. Make sure you buy one that is of high quality. I recommend OEM for safety reasons.
Satellite P305-S8997E | Windows7 Pro 64-bit | Intel Centrino Core 2 Duo T8100 2.16GHZ | 4GB DDR2 RAM | 320GB 5400RPM
Dell XPS 17 | corei7 andy Bridge | 8G DDR3 | 1TB x7200 | BD-RE | 1080P -
My laptop turns off when i remove the power cord
I have a Pavilion dv7-6c27cl running windows 7 (64 bit). Everytime I remove my laptop from the power cord, it shuts down immdiently. The battery says that it is at 77% and charging. I don't know what wrong at all. The light on the side is orange. Ideas on what's wrong and how to fix it?
It has to be a battery problem....I am getting that it just sits at 77% and never goes higher or lower? If you are still in warranty, the battery is covered (up to 1 year, I think), and if not you need to buy yourself a new battery. If by some chance you could try another known good battery that would be helpful but that seems unlikely.
-
Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigger issue or does a battery need to be in the compartment to boot up? Appreciate any help. Thanks.
Working battery needs to be in for the computer to function.
-
Envy DV7 laptop will not boot without the power cord being connected
My laptop won't boot on its own even when the battery indicator reads "fully charged (97%). If I have the power cord plugged into the computer (and the wall), it boots right away. Without the power cord, the "power indicator light" flashes once, the screen brightens to a lighter shade of gray, then it just shuts down.
I'm thinking I need to replace the battery but I thought it best to check with the experts first...................☺
Thanks!!
ETA..........I just saw the post about power cord failure. My power cord is one of those affected and I will be filling out the request for a replacement. Unfortunately my serial number is apparently located inside the battery compartment. I'm wondering if my cord has overheated and caused this boot problem with my computer.Hello, @jksweeney
Welcome to the HP Forums.
I see that your having an issue with the power and your notebook. That you've applied to have the power cord replaced as it was part of the recall.
Please let me know when that has been taken care of if the issue remains. I will remain subscribe to this thread, so that I will be notified if you post again.
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
My phone is plugged in and the screen shows the power cord connector and arrow and the iTunes logo. I have made sure the plug is in and power on. Touching the screen does nothing. I have turned it off and back on I get an apple pic then back to the iTunes logo pic, arrow and plug....
I installed new update and have had the connect to iTunes all day. I got home connected to iTunes and it said my phone couldn't be updated it needed restored to factory settings. I was reluctant to lose everything so I ignored this and clicked update. After it installed it said to restore again. Again I ignored it and this time it updated my phone and my phone turned back on with everything there.
So glad I ignored the previous messages asking me to restore! You could try this if you have iTunes and don't want it restored to factory settings. -
I attempted to update to latest version of IOS. Now all I get on the display is a graphic of the power cord with an arrow pointing to an iTunes icon. Ipad does not seem to power down or power up correctly. Home button is not responding.
I am new to this, could you provide me with a little more detail on how to do this? Thanks so much!
-
My macbook pro has been shutting off on its own. The power cord "shuts off" (does not work) simultaneously. Does anyone know what is wrong? or what could be the problem?
When my mac finally turns on the date/time is reset a windows pops up saying, "Your computer's clock is set to a date before January 1, 2008. This may cause some applications to behave erractically."Resetting your Mac's PRAM and NVRAM
If you have Apple Care you should give them a call. -
My phone will not turn on. I did a hard reset but all that my screen will show is a picture indicating I should connect the power cord to iTunes (power cord symbol with an arrow iTunes icon).I don't know my serial # and I do not have acces to my laptop.
The serial number has nothing to do with this.
YOur phone is in recovery mode.
You will need access to a computer with itunes on it to restore your phone.
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
Could my months-old kernel panic be related to overheating/fan troubles?
Greetings, all. At a certain point last year my computer's only functionality was a kernel panic. Startup and restart would yield either a crash in the middle of booting, or a KP after the computer was up and running for only a minute. All checks hav
-
After enter my serial number, he said that to use adobe creative suite 5 master collection you must
after enter my serial number, he said that to use adobe creative suite 5 master collection you must provide an adobe ID, i entered my adobe ID and password and after that he tell me that, we are enable to start your subscription for adobe creative su
-
Help with the garageband effects!
Once I go to Track info, if I double click on Vocals>male basic it takes me to a screen that shows noise gate, master echo, and master reverb. I wanna go back to the original track info screen and change it to megaphone but it won't let me go back. W
-
How to register a dll written in LV?
Hi LV'ers, I have written a simple dll in labview and I am trying to register it using regsvr32. I get the following error message: "Test was loaded, but the DllRegisterServer entrypoint was not found. Test does not apppear to be a .DLL or .OCX fil
-
MacBook losing communication with HP C4580
I have a new MacBook running OS X 10.5.6 When I bought it, I also got a HP Photosmart C4580 from the store. Every time I try to print anything, from any program on my computer, it starts to print and then stops part of the way through the job (on the