If i Update Driver my pc facing Hang problem..

My pc configurations:
mother board : MSI p45 Diamond
Processor : Intel Quad Core Q9500 12M 2.83G
Graphics : MSI GeForce 8800GT, NX8800GT-T2D1GE
Windows Vista 64 bit
Now i m using vista 64 bit windows..My problem is If i download My graphics card update Driver from Nvidia site and after install it my pc facing Hang problem..and if i reinstall my old driver (which i get from the card) my pc performance well..I also not get xp 64 bit driver with my graphics card...so i also download xp 64 bit driver from net and install it..and facing the same hang problem..Only my old driver work well..Now i want to use xp 64 bit windows..because of driver i cant use it.....pls help me how I Solve my problem..
Thanks
Chinmay

Quote from: chinmay on 15-October-09, 22:35:08
I have no experience about Flash BIOS...Can i Flash it Using Live Updates??..
>>Use the MSI HQ Forum USB flasher<<

Similar Messages

HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

I have 4s with 16GB storage capacity using IOS 7.1.2.
Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
Kindly resolve the issue as soon as possible
Ashish
[email protected]

Did you already try to set it up as a new device, as explained in this article?
iOS: How to back up your data and set up your device as a new device

Wifi grid is not gray and i update the software still facing this problem what can i do?

Wifi grid is not gray and i update the software still facing this problem what can i do?

Read here:
http://support.apple.com/kb/ts1559
If nothing helps, make an appointment at any Apple store, whether under warranty or not.

Firefox tells me to update to 10.0.1, but also tells me my AVG security won't work with update. What do I do for security? I'd skip update, but I already have hang problems, which always seems to happen if I don't update to current level.

I want to update, but not lose the security I have and like.
A catch-22 here: Update to avoid hang-time problems and loose my security that I'm comfortable with OR keep my AVG security and put up with "Mozilla not responding" hang time frustration.

The only item you'll lose is AVG Safe Search" which is incompatible with FF 10. All other functions of AVG are still valid and your computer is still protected. I have disabled AVG Safe Search for a long time now and have no problem whatsoever. You just have to be careful with what links do you click when you are on line. I don't know if AVG is going to fix this problem anytime soon since FF 10 has been out for a while and nothing has been done by AVG yet.

HT1222 I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit

I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit and sometimes it vanishes automatically. I,m confused.
Secondly i have an update IOS 7.0.4 waiting in my Software Update menu. I have tried so many times to update my iphone but it always fails to update the IOS 7.0.4. Any body suggest anything regarding this

Wow. Lots of help. Thanks apple

Oracleasm update-driver failed in OEL 6

Hi ,
I have a problem with oracleasm update-driver command.
I have OEL 6 installed in my machine.
When I entered command : rpm -qa| grep oracleasm it is showing me the below output :
oracleasm-support-2.1.5-1.el6.i686
But after that, when I issued command oracleasm update-driver , it shows me below error :
Kernel: 2.6.32-71.el6.i686 i686
Driver name: oracleasm-2.6.32-71.el6.i686
Driver for kernel 2.6.32-71.el6.i686 does not exist
As a result of this my ASMLib driver is not Initializing properly. Below is the details of that :
[root@abhishek]# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface [oracle]:
Default group to own the driver interface [oinstall]:
Start Oracle ASM library driver on boot (y/n) [y]:
Scan for Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: done
*Initializing the Oracle ASMLib driver: [FAILED]*
Can anyone please help me to resolve this ?
Thanks
Abhishek

Hi Dude,
Thanks very much for your detailed explanation.
I have successfully updated UEK kernel by following your mentioned steps.
But now I am facing another problem.
I have done upto steps below :
yum install kernel-uek kernel-uek-devel kernel-uek-headers kernel-uek-firmware+
*# reboot*
But when I am trying to enter into that kernel , it is showing dark screen with a arrow pointer .. I think the video driver is not updated for that kernel.
Let me elaborate the scenario :
When I boot my machine , it shows 2 options during boot :
*1. Windows XP*
*2. Other*
When I pressed enter into the Other it is showing 3 more options :
*1. Oracle Linux Kernel - 2.6.32-100.34.1.el6uek.i686*
*2. Oracle Linux Kernel - 2.6.32-131.0.15.el6.i686*
*3. Oracle Linux Kernel - 2.6.32-71.el6.i686*
When I choose 2nd and 3rd option it is showing Gnome GUI properly , but when choosing 1st option it is not showing any Gnome GUI , Just a dark screen and an arrow pointer on that. I can move that pointer here and there over the blank screen. So it is understood that machine is not getting hanged , only display is not coming ( please verify whether my understanding is correct or not ).
Untill the GUI comes, I am not able to test the rest of the commands you gave. So will you please update the solution with detailed steps.
One more information i am pasting here. The output of lsmod command ( running from the kernel : 2.6.32-131.0.15.el6.i686 )
[root@abhishek ]# lsmod
Module Size Used by
fuse 56128 2
autofs4 21604 3
sunrpc 197485 1
p4_clockmod 3135 1
ipt_REJECT 1905 2
nf_conntrack_ipv4 7700 2
nf_defrag_ipv4 1013 1 nf_conntrack_ipv4
iptable_filter 2147 1
ip_tables 9541 1 iptable_filter
ip6t_REJECT 3961 2
nf_conntrack_ipv6 7117 2
nf_defrag_ipv6 9847 1 nf_conntrack_ipv6
xt_state 1006 4
nf_conntrack 66010 3 nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state
ip6table_filter 2219 1
ip6_tables 10809 1 ip6table_filter
ipv6 266112 29 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6
dm_mirror 11652 0
dm_region_hash 10063 1 dm_mirror
dm_log 8520 2 dm_mirror,dm_region_hash
uinput 6218 0
ppdev 7335 0
parport_pc 19348 0
parport 31019 2 ppdev,parport_pc
ir_lirc_codec 3920 0
e100 28774 0
lirc_dev 14570 1 ir_lirc_codec
mii 4289 1 e100
ir_sony_decoder 1817 0
ir_jvc_decoder 1974 0
ir_rc6_decoder 2262 0
saa7134 143379 0
ir_rc5_decoder 1878 0
ir_nec_decoder 2294 0
v4l2_common 8534 1 saa7134
videodev 65768 2 saa7134,v4l2_common
rc_core 16553 7 ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,saa7134,ir_rc5_decoder,ir_nec_decoder
videobuf_dma_sg 8614 1 saa7134
videobuf_core 16927 2 saa7134,videobuf_dma_sg
tveeprom 11298 1 saa7134
sg 24778 0
microcode 12419 0
i2c_i801 9473 0
iTCO_wdt 9644 0
iTCO_vendor_support 2382 1 iTCO_wdt
snd_hda_codec_realtek 244000 1
snd_hda_intel 21424 2
snd_hda_codec 73949 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5320 1 snd_hda_codec
snd_seq 46091 0
snd_seq_device 5354 1 snd_seq
snd_pcm 67225 2 snd_hda_intel,snd_hda_codec
snd_timer 18308 2 snd_seq,snd_pcm
snd 52754 12 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer
soundcore 6460 1 snd
snd_page_alloc 7080 2 snd_hda_intel,snd_pcm
ext4 327734 2
mbcache 5918 1 ext4
jbd2 73784 1 ext4
sr_mod 14219 0
cdrom 34036 1 sr_mod
sd_mod 34239 4
crc_t10dif 1191 1 sd_mod
pata_acpi 2487 0
ata_generic 2555 0
ata_piix 19080 3
i915 381685 2
drm_kms_helper 31540 1 i915
drm 173379 3 i915,drm_kms_helper
i2c_algo_bit 4664 1 i915
i2c_core 25799 9 saa7134,v4l2_common,videodev,tveeprom,i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video 16662 1 i915
output 1779 1 video
dm_mod 63127 2 dm_mirror,dm_log
Thanks in advance.
Abhishek
Edited by: Abhishek on Jun 4, 2011 8:45 PM
Edited by: Abhishek on Jun 4, 2011 8:50 PM
Edited by: Abhishek on Jun 4, 2011 8:52 PM

Drive Redirection virtual channel hangs when copying a file from server to client over RDP 8.1

Problem Summary:
A UTF-8 without BOM Web RoE XML file output from a line of business application will not drag and drop copy nor copy/paste from a Server 2012 R2 RD Session Host running RD Gateway to a Windows 7 Remote Desktop client over an RDP 8.1 connection and the Drive
Redirection virtual channel hangs. The same issue affects a test client/server with only Remote Desktop enabled on the server.
Other files copy with no issue. See below for more info.
Environment:
Server 2012 R2 Standard v6.3.9600 Build 9600
the production server runs RDS Session Host and RD Gateway roles (on the same server). BUT,
the issue can be reproduced on a test machine running this OS with simply Remote Desktop enabled for Remote Administration
Windows 7 Pro w SP1v6.1.7601 SP1 Build 7601 running updates to support RDP 8.1
More Information:
-the file is a UTF-8 w/o BOM (Byte Order Marker) file containing XML data and has a .BLK extension. It is a Web Record of Employment (RoE) data file exported from the Maestro accounting application.
-the XML file that does not copy does successfully validate against CRA's validation XML Schema for Web RoE files
-Video redirection is NOT AFFECTED and continues to work
-the Drive Redirection virtual channel can be re-established by disconnecting/reconnecting
-when the copy fails, a file is created on the client and is a similar size to the original. However, the contents are incomplete. The file appears blank but CTRL-A shows whitespace
-we can copy the contents into a file created with Notepad and then that file, which used to copy, will then NOT copy
-the issue affects another Server 2012 R2 test installation, not just the production server
-it also affects other client Win7 Pro systems against affected server
-the issue is uni-directional i.e. copy fails server to client but succeeds client to server
-I don't notice any event log entries at the time I attempt to copy the file.
What DOES WORK
-downgrading to RDP 7.1 on the client WORKS
-modifying the file > 2 characters -- either changing existing characters or adding characters (CRLFs) WORKS
-compressing the file WORKS e.g. to a ZIP file
-copying OTHER files of smaller, same, and larger sizes WORKS
What DOES NOT WORK?
-changing the name and/or extension does not work
-copying and pasting affected content into a text file that used to have different content and did copy before, then does not work
-Disabling SMB3 and SMB2 does not work
-modifying TCP auto-tuning does not work
-disabling WinFW on both client and server does not work
As noted above, if I modify the affected file to sanitize it's contents, it will work, so it's not much help. I'm going to try to get a sample file exported that I can upload since I can't give you the original.
Your help is greatly appreciated!
Thanks.
Kevin

Hi Dharmesh,
Thanks for your reply!
The issue does seem to affect multiple users. I'm not fully clear on whether it's multiple users and the same employee's file, but I suspect so.
The issue happens with a specific XML file and I've since determined that it seems to affect the exported RoE XML file for one employee (record?) in the software. Other employees appear to work.
The biggest issue is that there's limited support from the vendor in this scenario. Their app is supported on 2012 R2 RDS.
What I can't quite wrap my head around are
why does it work in RDP 7.1 but not 8.1? What differences between the two for drive redirection would have it work in 7.1 and not 8.1?
when I examine the affected file, it really doesn't appear any different than one that works. I used Notepad++ and it shows the encoding as the same and there doesn't appear to be any invalid characters in the affected file. I wondered
if there was some string of characters that was being misinterpreted by RDP or some other operation and blocked somehow but besides having disabled AV and firewall software on both ends, I'm not sure what else I could change to test that further
Since it seems to affect only the one employee's XML file AND since modifying that file to change details in order to post it online would then make that file able to be copied, it seems I won't be able to post a sample. Too bad.
Kevin

PS CC (since JAN 2014 update) Layer-mask editing causes hangs/crashes

ONLY since JAN 2014 update, PS CC has been hanging/crashing when I paint/edit a layer mask. All may be well at first (or not), but suddenly the display of the mask (or mask overlay on the layer itself, as shown when hitting backslash key) is not shown in full but renders in s-l-o-w-l-y in rectilinear pieces <snapshot below was taken before video card upgraded but is still typical of what I mean>. When I view Windows' Task Manager for PS, I see my CPUs are each working at their upper limits (up to 80+-90+%), varying only by a few points, over a VERY long time... which could be MANY minutes. OR the System has decided PS is Not Responding.
In any case, whenever this happens, it means in all practicality PS CC is not working, so I either kill it or it's crashed.
Now, here's the thing: that VERY file, can immediately be opened in PS CS6 (which I have fortunately kept installed on my computer), and the mask will be as I thought it should be, and I can edit it as I always could, just fine! So it's obviously a PS CC thing, and I do NOT recall this happening prior to the JAN update. It is still a problem after the two subsequent updates.
I have not been able to determine the specific instances when this happens, as it seems to happen whenever I am editing a mask, no matter what size/softness/color brush, what magnification, what view mode, many or few layers, big or small file, etc.
I did upgrade my NVIDIA card (from GeForce GTX 260 [with current driver] to GTX660), just in case it was a factor (maybe kept it from crashing as fast? hard to tell... but it's still an unworkable problem). You can see from my Sys Info shown here from the PS CC Help menu that it should be more than sufficient for any PS CC task, and it's running the latest driver:
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2664 MHz
Built-in memory: 16379 MB
Free memory: 12453 MB
Memory available to Photoshop: 14697 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1200, right=1920
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=2048
gpu[0].RectTextureSize=16384
gpu[0].Renderer="GeForce GTX 660/PCIe/SSE2"
gpu[0].RendererID=4544
gpu[0].Vendor="NVIDIA Corporation"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.18.13.3221"
gpu[0].Driver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
gpu[0].DriverDate="20131219000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.1"
gpu[0].CUDASupported=1
gpu[0].CUDAVersion="6.0.1"
gpu[0].OCLBandwidth=1.16816e+011
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40 NVIDIA via Cg compiler"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[16384]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]
I work on digital-photography files, and use a layer mask in almost every file, so this relatively-recent bug is a big PITA, having to switch back and forth between CS6 and CC!
Until there's a fix... is there a way to roll-back my PS CC version to BEFORE the JAN 15, 2014 update?

I am not qualified to comment on technical issues; I'm just a user whose son in IT is my 'technical support department.' (But he's not much of a PS user.)
I'm pretty sure, however, that all my Prefs were set to the same things BEFORE the Jan 16, 2014 PS CC update as after (unless the update itself changed something I was unaware of... the settings APPEARED to be the same but I can't easily locate my notes of what my Prefs were from long ago).
And they were the same as the PS CS6 I have had installed on this same system for a very long time, with older video card with older driver, with newer driver; newer video card with newest driver, etc. Yet after that CC update, CC has not (until this workaround) worked re 'the masking bug' for me, yet CS6 has always worked just the same.
So I conclude that the only variable (other than the video card upgrade I did in an attempt to solve this and of course those Windows auto-updates) in this scenario IS something to do with PS *CC*, and after Jan 16, 2014.
As for restarting the machine vs. restarting PS, well, PS is the major player of my system, so when I shut that (and LR) down, I might as well 'clean things up' by Restarting. BTW, I am in the habit of closing and reopening PS (CC or CS6) whenever I finish with a file and load another, in order to get back some of that memory which PS never seems to want to let go. (This is not new to the latest versions, I think. My son says it's a 'memory hog'? ;-) ) I track its memory use in Windows' Task Manager and find that seems to let it 'refresh' itself. (See, I told you I'm not a technical person. ;-) ) But I do not think this has anything to do with the bug. Just a quirk of PS. Like when a tool goes all wonky (for example, its little icon becomes just a 'plus' sign even though the tool is still performing correctly, it's telling me, I think, that it would like to be restarted. And that makes it feel all better... I mean, tool icon reappears.)
Anyway... it's up to Adobe to figure out IF and what may be wrong with PS CC -- it still doesn't work for me as I had it configured at first, and I think it should, right? -- and to fix that... PLEASE. SOON.

Blue screen when I finished update driver by BootCamp 4.1.4586

I hace an Imac 2012 - 21.5". When I finish setup Window 7 and update driver by BootCamp 4.1.4586 and restart. After restert, when the window logo appear, the Blue screen is on and the Imac restart againt. Please, help me to solve this problem.

When I delete the file classpng.sys in system32/driver, it ok, I dont know why!

I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

Apple's response to my email:
"I understand that you can't update your apps using your iPad.
Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available.
Thank you for your patience. Apple wants your iTunes experience to be as enjoyable as possible. Have a great day!"

When i open any .HTML file from my computer it is not opening in firefox. Only a blank New Window Opens. Facing this problem since the firefox has updated.

Whenever i try to open any HTML file from my computer, it opens a new firefox window which is blank. Facing this problem after the new update. please fix this problem

I found that after Firefox v29, a LOT of my settings and 
add-ons were changed / reset. Try this;
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; 
'''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''. 
Then check ALL of your settings. Browser and add-ons. Then restart.

NO AUDIO in wmp because of updated driv

This subject has been brought up many times, but I can never seem to find an answer for it... Had updated an audio driver for my sound card, and every other media player BUT
wmp is operable. Tried services.msc and stopped and started Windows Audio
services, although I heard audio one time only. Rolled back the driver,
heard sound, but my soundblaster card won't function properly without the
updated driver for some reason. How ironic that only wmp player won't produce any audio and being THE standard media player for Windows OS. What can I do to correct this problem?! Tired of rolling back. Like the upgrade very much. Real Player or I-tunes is ok, but why should I have to change because of something like this. Creative conspiracy, perhaps?

Amplifiers. You are not clear when outlining this distressing problem how the speakers themselves work. At my office all the rooms are equipped with plugin speakers, but the Mac's output has inadequate power for them, so I use a set that has its own power unit.
However, from the initial question you posted, can you confirm that normal headphones do not work (or was that one of your -- correct -- test methods to analyse this)? If that is so, there may be other problems. If you have an iPod, try the earbuds for that.

Need update driver of my graphics card

How do I get an update driver of my graphics card?

All the drivers you need are included in OS X. They're updated along with the rest of the system. There is no separate download.

NVIDIA nForce 10/100 mbps Ethernet Updated driver

I am trying to upgrade from Vista to Windows 7. I ran the upgrade advisor and it said that I need to download the updated driver for the NVIDIA nForce 10/100 mbps Ethernet 32bit driver to install after the installation. Where do I download it from and wich file do I download.

Hi Marilyn, First things first. Before you upgrade to Windows 7, be sure that you update the BIOS to the latest level. All too often I have people update the operating system only to find out later that the BIOS is causing issues and the HP posted BIOS update will not run with the existing operating system. You need a NVIDIA nFORCE chipset driver and I will post a link to that for you in just a moment. However, don't upgrade your PC until you donwnload the drivers and copy them to external media. This is one of the drivers needed. It's one of the latest nFORCE drivers.

In FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue. I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

in FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue? I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

Go into preferences and under playback turn off background render. That helped speed things for me when working with large files.

If i Update Driver my pc facing Hang problem..

Similar Messages

Maybe you are looking for